检索结果-南通市图书馆

The Simulation and Experimental Validation on Gas-Solid Two Phase Flow in the Riser of a Dense Fluidized Bed

Journal of Thermal Science 2009年第2期18卷 137-141页

作者： xue-yao Wang fan jiang Xiang Xu Sheng-dian Wang Bao-guo fan Yun-han Xiao Key Laboratory of Advanced Energy and Power, Chinese Academy of Sciences (Institute of Engineering Thermophysics) Beijing 100190 Key Laboratory of Advanced Energy and Power Chinese Academy of Sciences (Institute of Engineering Thermophysics) Beijing China

Gas-solid flow in dense CFB (circulating fluidized bed)) riser under the operating condition, superficial gas 15.5m/s and solid flux 140 kg/m2s using Geldart B particles (sand) was investigated by experiments and CFD (computationalfluid dynamics) simulation. The overall and local flow characteristics are determined using the axialpressure profiles and solid concentration profiles. The cold experimental results indicate that the axial solid concentration distribution contains a dilute region towards the up-middle zone and a dense region near the bottomand the top exit zones. The typical core-annulus structure and the back-mixing phenomenon near the wall of theriser can be observed. In addition, owing to the key role of the drag force of gas-solid phase, a revised drag forcecoefficient, based on the EMMS (energy-minimization multi-scale) model which can depict the heterogeneouscharacter of gas-solid two phase flow, was proposed and coupled into the CFD control equations. In order to findan appropriate drag force model for the simulation of dense CFB riser, not only the revised drag force model butsome other kinds of drag force model were used in the CFD. The flow structure, solid concentration, clustersphenomenon, fluctuation of two phases and axial pressure drop were analyzed. By comparing the experimentwith the simulation, the results predicted by the EMMS drag model showed a better agreement with the experimentalaxial average pressure drop and apparent solid volume fraction, which proves that the revised drag forcebased on the EMMS model is an appropriate model for the dense CFB simulation.

关键词： riser gas-solid flow drag force EMMS model

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Anisotropic transport in a possible quasi-one-dimensional topological candidate:TaNi_(2)Te_(3)

引用

Tungsten 2023年第3期5卷 325-331页

作者： Yi Liu Chun-Qiang Xu Wen-He Jiao Ping-Gen Cai Bin Li Wei Zhou Bin Qian xue-fan jiang Kalaivaman R Raman Sankar Xiang-Lin Ke Guang-Han Cao Xiao-Feng Xu Department of Applied Physics Zhejiang University of TechnologyHangzhou 310023China Department of Physics and Astronomy Michigan State UniversityEast LansingMI 48824-2320USA School of Physics and Key Laboratory of MEMS of the Ministry of Education Southeast UniversityNanjing 211189China Department of Physics Zhejiang University of Science and TechnologyHangzhou 310023China New Energy Technology Engineering Laboratory of jiangsu Province and School of Science Nanjing University of Posts and TelecommunicationsNanjing 210023China Department of Physics Changshu Institute of TechnologyChangshu 215500China Institute of Physics Academia SinicaTaipei 11529China Department of Physics Zhejiang UniversityHangzhou 310027China

We report on the solid-state synthesis and the strongly anisotropic transport properties of the ternary telluride TaNi_(2)Te_(3),whose three orthogonal resistivity coefficients exhibit a large ratio of 1.4:1:2294(14:1:2303) at 300 K(2 K),thereby demonstrating its quasi-one-dimensional(q1D) electronic *** Kohler’ s rule in different current/field configurations shows a moderate *** one dimensionality manifests itself in the needle-like shape of crystal,the large anisotropic resistivity and the flat Fermi surface normal to the chain ***,the first-principles calculations also provide evidence for the existence of the nontrivial topological carriers in this q1D *** calculation demonstrates that TaNi_(2)Te_(3) is a strong topological nontrivial material with topological indices(1;1 0 1) and its nontrivial topology is also evidenced from its bulk-surface *** study may therefore offer a new platform for engineering the topologically nontrivial phase in low-dimensional materials,in analogy to the recently discovered q1D topological TaNiTe_(5).

关键词： Topological materials-Quasi-one-dimensionality Telluride

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effects of carbon content on the microstructure and tensile properties of a low-density steel

引用

International Journal of Minerals,Metallurgy and Materials 2025年第2期32卷 391-401页

作者： Yongxuan Shang Mingyu fan Shuyong jiang Zhongwu Zhang Key Laboratory of Superlight Materials and Surface Technology Ministry of EducationCollege of Materials Science and Chemical EngineeringHarbin Engineering UniversityHarbin 150001China State Key Laboratory of Metal Material for Marine Equipment and Application Iron&Steel Research Institute of Ansteel Group CorporationAnshan 114009China

Carbon can change the phase components of low-density steels and influence the mechanical *** this study,a new method to control the carbon content and avoid the formation ofδ-ferrite by decarburization treatment was *** microstructural changes and mechanical characteristics with carbon content induced by decarburization were systematically ***-Jaoul(C-J)analysis was employed to examine the work hardening characteristics during the tensile *** decarburization by heat treatments,the carbon content within the austenite phase decreased,while Mn and Al were almost unchanged;this made the steel with full austenite transform into the austenite and ferrite dual ***,(Ti,V)C carbides existed in both matrix phase and the mole fraction almost the *** addition,the formation of other carbides *** loss induced a decrease in strength due to the weakening of the carbon solid *** the steel with the single austinite,the deformation mode of austenite was the dislocation planar glide,resulting in the formation of *** the dual-phase steel,the deformation occurred by the dislocation planar glide of austenite first,with the increase in strain,the cross slip of ferrite took place,forming dislocation cells in *** the late stage of deformation,the work hardening of austinite increased rapidly,while that of ferrite increased slightly.

关键词： low-density steels carbon content decarburization strengthening mechanisms work hardening behavior

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Design and Application of Turbine Cascade Partitioned Endwall Profiling

引用

Journal of Thermal Science 2025年第1期34卷 110-128页

作者： ZENG Fei jiang Ruiqi xue Xingxu DU Wei LUO Lei ZHOU Xun AECC Hunan Aviation Powerplant Research Institute School of Energy Science and Technology Harbin Institute of Technology Science and Technology on Diesel Engine Turbocharging Laboratory China North Engine Research Institute

The influence of partitioned profiling design based on a large-pitch highly loaded cascade is studied by numerical *** partitioned profile is mainly composed of a pressure-side convex structure near the leading edge and a suction-side convex structure at the midstream and downstream sides of the *** influence of the change in the vertex axial position and peak value of the B-line on the secondary flow control is *** this paper,air(ideal gas) is selected as the flow *** average static pressure at the outlet and the average total temperature at the inlet are kept *** γ-θ is used as the turbulence *** results show that the pressure-side convex structure suppresses the spanwise and pitchwise migration of the inlet flow by adjusting the static pressure distribution of the flow field,so the development of the pressure-side leg of the horseshoe vortex is effectively *** suction-side convex structure adjusts the static pressure distribution of the flow field and increases the included angle between the cross-flow and suction surface,so the accumulation of low-momentum fluid,the development of a corner vortex and the flow separation at the trailing edge of the suction-side surface are all suppressed near the endwall-suction ***,the energy loss coefficient of the large-pitch highly loaded cascade is decreased from 0.0564 to 0.0485,representing a 25% reduction in secondary flow losses.

关键词： Vortex flow

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Superconducting Properties and Absence of Time Reversal Symmetry Breaking in the Noncentrosymmetric Superconducting Compounds Ta_(x)Re_(1-x)(0.1≤x≤0.25)

引用

Chinese Physics Letters 2021年第1期38卷 110-115页

作者： Chun-Qiang Xu Yi Liu Wei Zhou Jia-Jia Feng Sen-Wei Liu Yu-Xing Zhou Hao-Bo Wang Zhi-Da Han Bin Qian xue-fan jiang Xiao-Feng Xu Wei Ye Zhi-Xiang Shi Xiang-Lin Ke Pabitra-Kumar Biswas School of Physics and Key Laboratory of MEMS of the Ministry of Education Southeast UniversityNanjing 211189China Department of Applied Physics Zhejiang University of TechnologyHangzhou 310023China School of Electronic and Information Engineering Changshu Institute of TechnologyChangshu 215500China Department of Physics Zhejiang UniversityHangzhou 310007China Department of Physics and Astronomy Michigan State UniversityEast LansingMichigan 48824-2320USA ISIS Pulsed Neutron and Muon Source STFC Rutherford Appleton LaboratoryHarwell CampusDidcotOxfordshire OX110QXUnited Kingdom

Unconventional superconductivity,in particular,in noncentrosymmetric systems,has been a long-sought topic in condensed matter ***,Re-based superconductors have attracted great attention owing to the potential time-reversal symmetry breaking in their superconducting *** report the superconducting properties of noncentrosymmetric compounds Ta_(x)Re_(1-x) with 0.1 ≤x≤0.25,and find that the superconducting transition temperature reaches a maximum of ~8 K at the optimal level x=***,muon-spin rotation and relaxation measurements reveal no time-reversal symmetry breaking existing in its superconducting state,which is in sharp contrast to both centrosymmetric Re metal and many other noncentrosymmetric Re-based superconductors.

关键词： breaking symmetric (x)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Preparation of Co/S co-doped carbon catalysts for excellent methylene blue degradation

引用

International Journal of Minerals,Metallurgy and Materials 2025年第1期32卷 169-181页

作者： Haixu Li Haobo He Tiannan jiang Yunfei Du Zhichen Wu Liang Xu Xinjie Wang Xiaoguang Liu Wanhua Yu Wendong xue School of Materials Science and Engineering University of Science and Technology BeijingBeijing 100083China Beijing Jinyu Tongda Refractory Technologies Co. Ltd.Beijing 100085China

S and Co co-doped carbon catalysts were prepared via pyrolysis of MOF-71 and thiourea mixtures at 800℃at a mass ratio of MOF-71 to thiourea of 1:0.1 to effectively activate peroxymonosulfate(PMS)for methylene blue(MB)*** effects of two different mixing routes were identified on the MB degradation ***,the catalyst obtained by the alcohol solvent evaporation(MOF-AEP)mixing route could degrade 95.60%MB(50 mg/L)within 4 min(degradation rate:K=0.78 min^(-1)),which was faster than that derived from the direct grinding method(MOF-DGP,80.97%,K=0.39 min^(-1)).X-ray photoelectron spectroscopy revealed that the Co-S content of MOF-AEP(43.39at%)was less than that of MOF-DGP(54.73at%),and the proportion of C-S-C in MOF-AEP(13.56at%)was higher than that of MOF-DGP(10.67at%).Density functional theory calculations revealed that the adsorption energy of Co for PMS was -2.94 eV when sulfur was doped as C-S-C on the carbon skeleton,which was higher than that when sulfur was doped next to cobalt in the form of Co-S bond(-2.86 eV).Thus,the C-S-C sites might provide more contributions to activate PMS compared with ***,the degradation parameters,including pH and MOF-AEP dosage,were ***,radical quenching experiments and electron paramagnetic resonance(EPR)measurements revealed that ^(1)O_(2)might be the primary catalytic species,whereas·O~(2-)might be the secondary one in degrading MB.

关键词： advanced oxidation process alcohol solvent evaporation hydrogen bond S and Co co-doped carbon catalysts wastewater remediation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Optimizing hardware-software co-design based on non-ideality in memristor crossbars for in-memory computing

引用

Science China(Information Sciences) 2025年

作者： Pinfeng jiang Danzhe SONG Menghua HUANG fan YANG Letian WANG Pan LIU Xiangshui MIAO Xingsheng WANG School of Integrated Circuits Huazhong University of Science and Technology Hubei Yangtze Memory Labs

The memristor crossbar, with its exceptionally high storage density and parallelism, enables efficient vector matrix multiplication (VMM), significantly improving data throughput and computational efficiency. However, its analog computing is vulnerable to issues like IR-drop, device-to-device (D2D) variation, and stuck-at-fault (SAF), leading to a substantial decrease in the inference accuracy of neural networks deployed on crossbars. This work presents a hardware-software co-design approach tailored to deal with memristor crossbar non-ideality. We introduce an end-to-end functional array simulator (FAST) for precise and ultra fast end-to-end training, mapping, and evaluation of neural networks on the memristor crossbar. Utilizing the sparsity of the memristor crossbar coefficient matrix, it achieves simulation with low storage and computational resource requirements,dynamically selecting the optimal solution to complete the process. It can also precisely simulate the impact of non-ideal effects such as IR-drop, retention, variation, SAF, and AD/DA precision. Using FAST, we assess memristor crossbar matrix operations under non-ideal conditions, identifying the max throughput and the most energy-efficient crossbar configurations. Additionally,we propose a comparator-based activation function modulation (CAFM) scheme and its corresponding hardware architecture with programmable activation function circuits to address the IR-drop issue, enabling low power and area overheads, resulting in the recovery of neural network accuracy by 54%or more. This is validated within FAST, demonstrating the success of our hardware-software optimization co-design.

关键词：

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Staged dendrite suppression for high safe and stable lithium-sulfur batteries

引用

Journal of Energy Chemistry 2025年第1期100卷 674-683页

作者： Jun jiang Zhenjie Lu Yanwen Ding Shujun Liu Zhijie Qi Tian Tang Yunfan Zhang Zhiyuan Ma Jingwen Sun Liang xue Wenyao Zhang Pan Xiong Xin Wang Junwu Zhu Yongsheng Fu Key Laboratory for Soft Chemistry and Functional Materials of Ministry of Education Nanjing University of Science and Technology jiangsu Pylon Battery Co.Ltd

The unavoidable dendrite growth and shuttle effect have long been stranglehold challenges limiting the safety and practicality of lithium-sulfur ***,we propose a dual-action strategy to address the lithium dendrite issue in stages by constructing a multifunctional surface-negatively-charged nanodiamond layer with high ductility and robust puncture resistance on polypropylene （PP） *** uniformly loaded compact negative layer can not only significantly enhance electron transmission efficiency and promote uniform lithium deposition,but also reduce the formation of dendrite during early deposition *** importantly,under the strong puncture stress encountered during the deterioration of lithium dendrite growth under limiting current,the high ductility and robust puncture resistance（145.88 MPa） of as-obtained nanodiamond layer can effectively prevent short circuits caused by unavoidable lithium *** Li||Li symmetrical cells assembled with nanodiamond layer modified PP demonstrated a stable cycle of over 1000 h at 2 mA cm-2with a polarization voltage of only 29.3 ***,the negative charged layer serves as a physical barrier blocking lithium polysulfide ions,effectively mitigating capacity *** improved cells achieved a capacity decay of only 0.042%per cycle after 700 cycles at 3 C,demonstrating effective suppression of dendrite growth and capacity attenuation,showing promising prospect.

关键词： Ductility

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Can patients with mild non-neoplastic lesions diagnosed at baseline screening be safely exempt from surveillance: evidence from multicenter community-based cohorts

引用

Science China Life Sciences 2025年第1期68卷 263-271页

作者： Siyi He Zhiyi Zhang Guohui Song Zhenhai Wang Chunyun Dai Shipeng Yan Kun jiang Bingbing Song He Li Maomao Cao Dianqin Sun fan Yang Xinxin Yan Shaoli Zhang Yi Teng Qianru Li Changfa Xia Wanqing Chen Office of Cancer Screening National Cancer Center/National Clinical Research Center for Cancer/Cancer HospitalChinese Academy of Medical Sciences and Peking Union Medical College Department of Gastroenterology Gansu Wuwei Tumor Hospital Cixian Cancer Institute Linzhou Cancer Hospital Center for Disease Control and Prevention of Sheyang County Department of Cancer Prevention and Control Hunan Cancer Hospital and The Affiliated Cancer Hospital of Xiangya School of MedicineCentral South University Luoshan Center for Disease Control and Prevention Office for Cancer Control and Research Affiliated Cancer Hospital of Harbin Medical University

Surveillance recommendations for gastric cancer（GC） in current guidelines focused on advanced precancerous lesions and were based on precise diagnosis of severity/extent of baseline lesions. We aimed to develop a less endoscopy-related equipment-dependent risk-stratification tool, and assessed whether mild-precursor-lesion patients can be safely exempt from surveillance. In the multicenter communitybased cohort, 75,051 participants receiving baseline endoscopy were enrolled during 2015–2017 and followed-up until 2021. Cumulative incidence rates（CIRs） of GC for precancerous-conditions were calculated by Kaplan-Meier method and compared by Log-rank tests. Mixedeffects Cox regression models were used to detect potential factors for progression towards GC. A risk score was calculated as counts of selected factors. An independent cohort, including 26,586 participants was used for external validation. During a median follow-up of 6.25 years, CIRs of GC were 0.302%, 0.436%, and 4.756% for normal group, non-neoplastic（atrophic gastritis/intestinal metaplasia） and neoplastic lesions（low-grade/high-grade dysplasia）, respectively(Ptrend<0.001). Four predictors, including male, ≥60 years, smoking, and limited vegetable consumption, were selected for risk-stratification. High-risk patients（≥3 risk factors） with non-neoplastic lesions showed higher GC risks（adjusted HR=7.73, 95%CI: 4.29–13.92）, and their four-year CIR reached the one-year CIR of neoplastic lesions. Further categorizing non-neoplastic lesions by histological grade, both patients with moderate-to-severe lesions（aHR=3.07, 95%CI: 1.67–5.64） and high-risk patients with mild lesions（aHR=7.29, 95%CI: 3.58–14.86） showed higher risks. Consistent trends were observed in validation cohort. High-risk mild-precursor-lesion patients should receive surveillance within 3–5 years after baseline screening. Our study provides evidence on supplementing current guideline recommendations.

关键词： stomach neoplasms precancerous conditions cancer screening cumulative incidence risk stratification

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Experimental Study on Wire Melting Control Ability of Twin-Body Plasma Arc

引用

Chinese Journal of Mechanical Engineering 2024年第2期37卷 184-194页

作者： Ruiying Zhang fan jiang Long xue School of Mechanical Engineering Beijing Institute of Petrochemical TechnologyBeijing 102617China Beijing Academy of Safety Engineering and Technology Beijing 102617China College of Mechanical and Energy Engineering Beijing University of TechnologyBeijing 100124China

The twin-body plasma arc has the decoupling control ability of heat transfer and mass transfer,which is beneficial to shape and property control in wire arc additive *** this paper,with the wire feeding speed as a characteristic quantity,the wire melting control ability of twin-body plasma arc was studied by adjusting the current separation ratio(under the condition of a constant total current),the wire current/main current and the position of the wire in the arc axial *** results showed that under the premise that the total current remains unchanged(100 A),as the current separation ratio increased,the middle and minimum melting amounts increased approximately synchronously under the effect of anode effect power,the first melting mass range remained constant;the maximum melting amount increased twice as fast as the middle melting amount under the effect of the wire feeding speed,and the second melting mass range was *** the wire current increased,the anode effect power and the plasma arc power were both factors causing the increase in the wire melting amount;however,when the main current increased,the plasma arc power was the only factor causing the increase in the wire melting *** average wire melting increment caused by the anode effect power was approximately 2.7 times that caused by the plasma arc *** minimum melting amount was not affected by the wire-torch distance under any current separation ratio *** the current separation ratio increased and reached a threshold,the middle melting amount remained constant with increasing wire-torch *** the current separation ratio continued to increase and reached the next threshold,the maximum melting amount remained constant with the increasing wire-torch *** effect of the wire-torch distance on the wire melting amount reduced with the increase in the current separation *** this study,the decoupling mechanism and ability of this innovative

关键词： Twin-body plasma arc Melting control ability Melting amount Current separation ratio

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：