检索结果-南通市图书馆

Effect of Poly-Alkylene-Glycol Quenchant on the Distortion, Hardness, and Microstructure of 65Mn Steel

Computers, Materials & Continua 2021年第6期67卷 3249-3264页

作者： Thi xuan Tran xuan phuong nguyen Duong Nam nguyen Dinh Toai Vu Minh Quang Chau Osamah Ibrahim Khalaf Anh Tuan Hoang Hanoi University of Science and Technology HanoiVietnam Ho Chi Minh City University of Transport Ho Chi Minh CityVietnam Vietnam Maritime University HaiphongVietnam Industrial University of Ho Chi Minh City(IUH) Ho Chi Minh CityVietnam Al-Nahrain Nanorenewable Energy Research Center Al-Nahrain UniversityBaghdadIraq Ho Chi Minh city University of Technology(HUTECH) Ho Chi Minh CityVietnam

Currently,the 65Mn steel is quenched mainly by oil *** though the lower cooling rate of oil compared to water reduces the hardness of steel post quenching,the deforming and cracking of parts are often *** the other hand,the oil media also has the disadvantage of being ammable,creating smoke that adversely affects the *** poly alkylene glycol(PAG)polymer quenchant is commonly used for quenching a variety of steels based on its advantages such as non-ammability and exible cooling rate subjected to varying concentration and stirring *** article examines the effect of PAG polymer quenching solution(with concentrations of 10%and 20%)on deformation,hardness,and microstructure of C-ring samples made of 65Mn ***,the performance of PAG polymer quenchant is also compared with those of two common quenching solutions:Water and *** cooling in water,the C-ring samples had the largest deformation and 2 times higher than the results obtained when a 10%PAG solution was *** particular,similar levels of deformation on the C-ring samples were observed in both cases of 20%PAG solution and oil as the primary quenching ***,the hardness level measured between the sampled parts quenched in the 20%PAG solution appeared to be more uniform than that obtained from the oil-quenched *** study of the microscopic structure of steel by optical microscopy combined with X-ray diffraction showed that the water hardened sample exhibited cracks and comprised of two phases,martensite and retained *** to the results of Electron Back Scattering Diffraction(EBSD)analysis and backscattering electronic image(BSE),the content of austenite residue in the sample when the sample was cooled in PAG 10 and 20%solution was 3.21%and 4.73%,respectively and smaller than the measurements obtained from oil quenching ***,the 65Mn steel is cooled in 20%PAG solution for high hardness and more evenly distributed than when it is q

关键词： Polyethylene glycol electron backscattering diffraction quenching media cooling rate backscattering electronic image

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Thermodynamic Simulation on the Change in Phase for Carburizing Process

引用

Computers, Materials & Continua 2021年第7期68卷 1129-1145页

作者： Anh Tuan Hoang xuan phuong nguyen Osamah Ibrahim Khalaf Thi xuan Tran Minh Quang Chau Thi Minh Hao Dong Duong Nam nguyen Ho Chi Minh city University of Technology(HUTECH) HoVietnam Ho Chi Minh city University of Transport Ho Chi Minh cityVietnam Al-Nahrain University Al-Nahrain Nanorenewable Energy Research CenterBaghdadIraq Hanoi University of Science and Technology HanoiVietnam Industrial University of Ho Chi Minh City(IUH) Ho Chi Minh cityVietnam Vietnam Maritime University HaiphongVietnam

The type of technology used to strengthen the surface structure of machine parts,typically by carbon-permeation,has made a great contribution to the mechanical engineering industry because of its outstanding advantages in corrosion resistance and enhanced mechanical and physical ***,carbon permeation is considered as an optimal method of heat treatment through the diffusion of carbon atoms into the surface of alloy *** study presented research results on the thermodynamic calculation and simulation of the carbon permeability *** Fick’s law,the paper calculated the distribution of carbon concentration in the alloy steel after it is absorbed from the surface into the internal of the *** the SYSWELD software,an analysis was performed on the carbon permeability process to determine the distribution of carbon concentrations in 20CrMo steel that was then followed by a detailed analysis of the microstructure of the sample post the carburizing *** to the calculation results,the surface carbon content was 0.9%and steadily decreased into the *** 3 hours,the depth of the absorbent layer was measured at 0.5 mm for both the cylindrical and cubic *** analyzing the phase,the distribution of martensite phases such as ferrite/pearlite and residual austenite was also determined after the carburizing process.

关键词： Carburizing process 20CrMo steel thermodynamic analysis microstructure formation carbon concentration

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Evaluation of Weathering Performance of Rosin-Copper Based Treated Wood

引用

Journal of Renewable Materials 2022年第11期10卷 2765-2780页

作者： Thi Thanh Hien nguyen Nho Quyet Tran Thi Minh Nguyet nguyen Hien Mai Trinh xuan phuong Le Trong Kien nguyen College of Wood Industry and Interior Design Vietnam National University of ForestryHa NoiViet Nam College of Economics and Management Northeast Forestry UniversityHarbinChina

This study aimed to evaluate the effect of natural weathering on some surface characteristics and mechanical properties of Styrax wood treated with mixtures of 1.0%,2.0%,or 4.0%rosin sizing agent and 3%copper *** samples after treatment were exposed to outdoor conditions for one year and changes in color,glossiness,weight loss,compression strength parallel to grain(CSPG),modulus of rupture(MOR),and modulus of elasticity(MOE)were investigated after 6 and 12-month of natural *** results showed that rosin-copper treatment could improve color stability and gloss of samples after *** losses of all rosin-copper treated samples after 12 months of exposure were negligible compared with the untreated control *** addition,rosin-copper treatment enhanced the CSPG compared to untreated controls,but slightly decreased the MOR and MOE of Styrax wood before *** weathering factors induced a reduction for all strength properties,however,the decrease rate for strength properties of rosin-copper treated samples was negligible compared with the untreated control samples after 12-month natural weathering *** FTIR and SEM-EDX confirmed that the use of the rosin-copper formulations to impregnate wood could decrease the hazard of the copper preservative leaching into the environment,while also enhancing more resistance against weathering factors and other biotic factors.

关键词： Rosin-copper weathering color stability CSPG MOR MOE

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Advancing Wound Filling Extraction on 3D Faces:An Auto-Segmentation and Wound Face Regeneration Approach

引用

Computer Modeling in Engineering & Sciences 2024年第5期139卷 2197-2214页

作者： Duong Q.nguyen Thinh D.Le phuong D.nguyen Nga T.K.Le H.nguyen-xuan Department of Mathematics and Statistics Quy Nhon UniversityQuy Nhon City55100Viet Nam Applied Research Institute for Science and Technology Quy Nhon UniversityQuy Nhon City55100Viet Nam CIRTECH Institute HUTECH UniversityHo Chi Minh City72308Viet Nam

Facial wound segmentation plays a crucial role in preoperative planning and optimizing patient outcomes in various medical *** this paper,we propose an efficient approach for automating 3D facial wound segmentation using a two-stream graph convolutional *** method leverages the Cir3D-FaIR dataset and addresses the challenge of data imbalance through extensive experimentation with different loss *** achieve accurate segmentation,we conducted thorough experiments and selected a high-performing model from the *** selectedmodel demonstrates exceptional segmentation performance for complex 3D facial ***,based on the segmentation model,we propose an improved approach for extracting 3D facial wound fillers and compare it to the results of the previous *** method achieved a remarkable accuracy of 0.9999993% on the test suite,surpassing the performance of the previous *** this result,we use 3D printing technology to illustrate the shape of the wound *** outcomes of this study have significant implications for physicians involved in preoperative planning and intervention *** automating facial wound segmentation and improving the accuracy ofwound-filling extraction,our approach can assist in carefully assessing and optimizing interventions,leading to enhanced patient ***,it contributes to advancing facial reconstruction techniques by utilizing machine learning and 3D bioprinting for printing skin tissue *** source code is available at https://***/SIMOGroup/WoundFilling3D.

关键词： 3D printing technology face reconstruction 3D segmentation 3D printed model

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Landslide Susceptibility Mapping Using RBFN-Based Ensemble Machine Learning Models

引用

Computer Modeling in Engineering & Sciences 2025年第1期142卷 467-500页

作者： Landslide Susceptibility Mapping Using RBFN-Based Ensemble Machine Learning Models Duc-Dam nguyen nguyen Viet Tiep Quynh-Anh Thi Bui Hiep Van Le Indra Prakash Romulus Costache Manish Pandey Binh Thai Pham Faculty of Civil Engineering University of Transport TechnologyThanh XuanHa Noi100000Vietnam Faculty of Hydraulic Engineering Hanoi University of Civil EngineeringHa Noi100000Vietnam DDG(R)Geological Survey of India Gandhinagar382010India Research Institute of the University of Bucharest Bucharest050663Romania National Institute of Hydrology and Water Management Bucharest013686Romania Department of Civil Engineering Transilvania University of BrasovBrasov500152Romania Danube Delta National Institute for Research and Development Tulcea820112Romania Marwadi University Research Center(MURC) Marwadi UniversityRajkotGujaratBharat360003India Department of Civil Engineering Faculty of Engineering&TechnologyMarwadi UniversityRajkotGujaratBharat360003India

This study was aimed to prepare landslide susceptibility maps for the Pithoragarh district in Uttarakhand,India,using advanced ensemble models that combined Radial Basis Function Networks(RBFN)with three ensemble learning techniques:DAGGING(DG),MULTIBOOST(MB),and ADABOOST(AB).This combination resulted in three distinct ensemble models:DG-RBFN,MB-RBFN,and ***,a traditional weighted method,Information Value(IV),and a benchmark machine learning(ML)model,Multilayer Perceptron Neural Network(MLP),were employed for comparison and *** models were developed using ten landslide conditioning factors,which included slope,aspect,elevation,curvature,land cover,geomorphology,overburden depth,lithology,distance to rivers and distance to *** factors were instrumental in predicting the output variable,which was the probability of landslide *** analysis of the models’performance indicated that the DG-RBFN model,with an Area Under ROC Curve(AUC)of 0.931,outperformed the other *** AB-RBFN model achieved an AUC of 0.929,the MB-RBFN model had an AUC of 0.913,and the MLP model recorded an AUC of *** results suggest that the advanced ensemble ML model DG-RBFN was more accurate than traditional statistical model,single MLP model,and other ensemble models in preparing trustworthy landslide susceptibility maps,thereby enhancing land use planning and decision-making.

关键词： Landslide susceptibility map spatial analysis ensemble modelling information values(IV)

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

ON A NONLINEAR VOLTERRA-HAMMERSTEIN INTEGRAL EQUATION IN TWO VARIABLES

引用

Acta Mathematica Scientia 2013年第2期33卷 484-494页

作者： Le Thi phuong Ngoc nguyen Thanh Long Nhatrang Educational College 01 Nguyen Chanh Str.Nhatrang CityVietnam Department of Mathematics and Computer Science University of Natural ScienceVietnam National University Ho Chi Minh City227 Nguyen Van Cu Str.Dist. 5Ho Chi Minh CityVietnam

Using a fixed point theorem of Krasnosel＇skii type, this article proves the exis- tence of asymptotically stable solutions for a Volterra-Hammerstein integral equation in two variables.

关键词： Volterra-Hamnmrstein integral equation in two variables the fixed point theo-rem of Krasnosel'skii type contraction mapping completely continuous asymp-totically stable solution

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Regularization of the Inverse Problem for Time Fractional Pseudo-parabolic Equation with Non-local in Time Conditions

引用

Acta Mathematica Sinica,English Series 2022年第12期38卷 2199-2219页

作者： nguyen Duc phuong Le Dinh LONG Anh Tuan nguyen Dumitru BALEANU Faculty of Fundamental Science Industrial University of Ho Chi Minh CityVietnam Division of Applied Mathematics Science and Technology Advanced InstituteVanLang UniversityHoChi Minh CityVietnam Faculty of Technology Van Lang UniversityHo Chi Minh CityVietnam Department of Mathematics Cankaya UniversityAnkaraTurkey Lebanese AmericanUniversity BeirutLebanon Institute of Space Sciences Magurele-BucharestRomania

This paper is devoted to identifying an unknown source for a time-fractional diffusion equation in a general bounded ***,we prove the problem is non-well posed and the stability of the source ***,by using the Modified Fractional Landweber method,we present regularization solutions and show the convergence rate between regularization solutions and sought solution are given under a priori and a posteriori choice rules of the regularization parameter,***,we present an illustrative numerical example to test the results of our theory.

关键词： Source problem fractional pseudo-parabolic problem ill-posed problem convergence estimates regularization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

GLOBAL BOUND ON THE GRADIENT OF SOLUTIONS TO p-LAPLACE TYPE EQUATIONS WITH MIXED DATA

引用

Acta Mathematica Scientia 2024年第4期44卷 1394-1414页

作者： Minh-phuong TRAN The-Quang TRAN Thanh-Nhan nguyen Applied Analysis Research Group Faculty of Mathematics and StatisticsTon Duc Thang UniversityHo Chi Minh CityVietnam nguyen Huu Huan High School Thu Duc CityVietnam Group of Analysis and Applied Mathematics Department of MathematicsHo Chi Minh City University of EducationVietnam

In this paper,the study of gradient regularity for solutions of a class of elliptic problems of p-Laplace type is *** particular,we prove a global result concerning Lorentz-Morrey regularity of the non-homogeneous boundary data problem:-div((s^(2)+|▽u|^(2)p-2/2)▽u)=-div(|f|^(p-2)f)+g inΩ,u=h in■Ω,with the(sub-elliptic)degeneracy condition s∈[0,1]and with mixed data f∈L^(p)(Q;R^(n)),g∈Lp/(p-1)(Ω;R^(n))for p∈(1,n).This problem naturally arises in various applications such as dynamics of non-Newtonian fluid theory,electro-rheology,radiation of heat,plastic moulding and many *** on the idea of level-set inequality on fractional maximal distribution functions,it enables us to carry out a global regularity result of the solution via fractional maximal *** to the significance of M_(α)and its relation with Riesz potential,estimates via fractional maximal functions allow us to bound oscillations not only for solution but also its fractional derivatives of orderα.Our approach therefore has its own interest.

关键词： gradient estimates p-Laplace quasilinear elliptic equation fractional maximal operators Lorentz-Morrey spaces

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

3D modeling of transformation of gaseous pollutants in the high-pressure turbine of an aircraft engine

引用

Propulsion and Power Research 2020年第1期9卷 1-14页

作者： Trung Hieu nguyen phuong nguyen-Tri Francois Garnier Department of Mechanical Engineering École de Technologie Supérieure(ETS)MontrealQuebecH3C 1K3Canada Institute of Research and Development Duy Tan UniversityDa Nang550000Viet Nam Department of Chemistry Biochemistry and PhysicsUniversitédu QuébecàTrois-RivièresUniversity of QuebecTrois-Rivières(Québec)G9A 5H7Canada

Aircraft emissions contribute to global climate change and regional air pollution near *** the formation and the transformation of emissions in the aircraft engine is essential to properly quantify the environmental impact and air ***,precise investigation of chemical process in the turbine is challenging because of the complexity of the transformation process in the complex flow relating to the moving blade at high temperature and high *** present here,the first published model study of 3D chemical formations inside a high-pressure turbine and first time to compare three numerical solutions(1D,2D and 3D calculations)of transformation of trace species inside an aircraft *** model has simulated the evolution of principal precursor pollutant gases(NOx and SOx)and other species(hydrogen,oxygen species and carbon oxides).Our results also indicated strong dissimilarities in chemical transformations of 3D *** comparing the three solutions,the results obtained showed that the difference of mole fractions of species can be under predicted by 75%between 1D and 2D calculations and in the comparison of 2D and 3D calculation,the under predicted difference may be 90%.

关键词： Gaseous pollutants High-pressure turbine Aircraft engine 3D modeling

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Liouvillian Solutions of Algebraic Ordinary Differential Equations of Order One of Genus Zero

引用

Journal of Systems Science & Complexity 2023年第2期36卷 884-893页

作者： nguyen Tri Dat NGO Lam xuan Chau Faculty of Basic Science Ho Chi Minh City University of TransportHo Chi Minh CityVietnam Department of Mathematics and Statistics Quy Nhon UniversityQuy Nhon CityVietnam

This paper considers the class of autonomous algebraic ordinary differential equations(AODEs)of order one,and studies their Liouvillian general *** particular,let F(y,w)=0 be a rational algebraic curve over *** authors give necessary and sufficient conditions for the autonomous first-order AODE F(y,y′)=0 to have a Liouvillian solution over ***,the authors show that a Liouvillian solutionαof this equation is either an algebraic function over C(x)or an algebraic function over C(exp(ax)).As a byproduct,these results lead to an algorithm for determining a Liouvillian general solution of an autonomous AODE of order one of genus *** parametrizations of rational algebraic curves play an important role on this method.

关键词： Algebraic ordinary differential equation autonomous differential equation Liouvillian solution rational algebraic curve rational parametrizations

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：