检索结果-南通市图书馆

Model-based investigation on building thermal mass utilization and flexibility enhancement of air conditioning loads

在线全文

学校读者我要写书评

暂无评论

Building Simulation 2024年第8期17卷 1289-1308页

作者： yue Sun Tianyi Zhao shan Lyu Institute of Building Energy School of Infrastructure EngineeringDalian University of TechnologyDalian116024China School of Civil Engineering Chongqing UniversityChongqing 400045China

Building air conditioning systems(ACs)can contribute to the stable operation of power grids by participating in peak load shaving programs,but the participants need a fast and accurate zone temperature prediction model,e.g.,the detailed room thermal-resistance(RC)model,to improve peak shaving effect and avoid obvious thermal ***,when applying the detailed room RC model to multi-zone buildings,conventional studies mostly consider the heat transfer among neighboring rooms,which contributes little to the prediction accuracy improvement,but leads to complicated model structure and heavy ***,a distributed RC model is developed for multi-zone buildings in this *** to conventional models,the proposed model considers the total heat transfer between the building and the air,and ignores the heat transfer among indoor air in neighboring rooms through internal walls with heavy thermal mass,thereby having comparable temperature prediction accuracy,simpler structure,and stronger *** on the model,the effectiveness of passive pre-cooling strategies in reducing the air conditioning loads during peak periods is *** indicate that the thermal insulation performance of opaque building envelope is quite important to the flexibility enhancement of air conditioning *** an uninsulated building envelope,passive pre-cooling is useless for the peak load *** comparison,well insulated opaque building envelope enables the building thermal mass to be utilized through passive pre-cooling,which leads to the air conditioning loads during peak periods being further reduced by about 12%.

关键词： RC model passive pre-cooling internal thermal mass building energy flexibility

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

复杂平面区域的三角网格生成算法

国防科技大学学报 2008年第4期30卷 94-97页

作者：陈欣熊岳山国防科技大学计算机学院

为生成复杂平面区域的有限元网格,提出了基于网格细化的三角网格生成算法。该算法首先采用耳尖移除法对区域边界做三角划分,得到粗略的初始网格。提出Delaunay优化平分方法,根据网格密度细化初始网格,该网格细化方法结合最长边平分技术... 详细信息

为生成复杂平面区域的有限元网格,提出了基于网格细化的三角网格生成算法。该算法首先采用耳尖移除法对区域边界做三角划分,得到粗略的初始网格。提出Delaunay优化平分方法,根据网格密度细化初始网格,该网格细化方法结合最长边平分技术与Delaunay边交换技术,可有效提高内点生成与单元细分的质量。实验表明,基于Delaunay优化平分的三角网格生成算法可对任意平面域进行网格剖分,生成符合有限元计算要求的高质量三角网格。

关键词：三角网格网格生成网格细化 Delaunay优化平分

在线全文

学校读者我要写书评

暂无评论

线性方程组二级迭代法的收敛速度

国防科技大学学报 2005年第3期27卷 100-104页

作者：蔡放熊岳山国防科技大学理学院国防科技大学计算机学院湖南长沙410073

二级迭代法由内、外迭代和内迭代次数三部分组成。给出了线性方程组二级迭代法R1-收敛因子的一个上界,这个上界由内、外迭代的R1-收敛因子和内迭代次数所决定,其主部为外迭代的R1-收敛因子。在矩阵单调性条件下,对于任何内迭代方法和任... 详细信息

二级迭代法由内、外迭代和内迭代次数三部分组成。给出了线性方程组二级迭代法R1-收敛因子的一个上界,这个上界由内、外迭代的R1-收敛因子和内迭代次数所决定,其主部为外迭代的R1-收敛因子。在矩阵单调性条件下,对于任何内迭代方法和任意内迭代次数,证明了外迭代的R1-收敛因子也是二级迭代法R1-收敛因子的下界。所得结果反映了内、外迭代的收敛速度以及内迭代次数对于二级迭代法收敛速度的综合影响。

关键词：线性方程组二级迭代法收敛速度

Fast garment simulation with aid of hybrid bones

在线全文

学校读者我要写书评

暂无评论

Journal of Central South University 2015年第6期22卷 2218-2226页

作者：吴博陈寅徐凯程志全熊岳山 College of Computer National University of Defense Technology Science and Technology on Parallel and Distributed Processing Laboratory (National University of Defense Technology) Avatar Science Company

A data-driven method was proposed to realistically animate garments on human poses in reduced space. Firstly, a gradient based method was extended to generate motion sequences and garments were simulated on the sequences as our training data. Based on the examples, the proposed method can fast output realistic garments on new poses. Our framework can be mainly divided into offline phase and online phase. During the offline phase, based on linear blend skinning(LBS), rigid bones and flex bones were estimated for human bodies and garments, respectively. Then, rigid bone weight maps on garment vertices were learned from examples. In the online phase, new human poses were treated as input to estimate rigid bone transformations. Then, both rigid bones and flex bones were used to drive garments to fit the new poses. Finally, a novel formulation was also proposed to efficiently deal with garment-body penetration. Experiments manifest that our method is fast and accurate. The intersection artifacts are fast removed and final garment results are quite realistic.

关键词： data-driven linear blend skinning hybrid bones interactive

Recent research progress in the mechanism and suppression of fusion welding-induced liquation cracking of nickel based superalloys

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第5期31卷 1072-1088页

作者： Zongli Yi Jiguo shan yue Zhao Zhenlin Zhang Aiping Wu Department of Mechanical Engineering Tsinghua UniversityBeijing 100084China College of Engineering China Agricultural UniversityBeijing 100091China State Key Laboratory of Clean and Efficient Turbomachinery Power Equipment Department of Mechanical EngineeringTsinghua UniversityBeijing 100084China Key Laboratory for Advanced Materials Processing Technology Ministry of EducationBeijing 100084China School of Material Science and Engineering Southwest Jiaotong UniversityChengdu 610031China

Nickel-based superalloys are extensively used in the crucial hot-section components of industrial gas turbines,aeronautics,and astronautics because of their excellent mechanical properties and corrosion resistance at high *** welding serves as an effective means for joining and repairing these alloys;however,fusion welding-induced liquation cracking has been a challenging *** paper comprehensively reviewed recent liquation cracking,discussing the formation mechanisms,cracking criteria,and *** recent investigations,regulating material composition,changing the preweld heat treatment of the base metal,optimizing the welding process parameters,and applying auxiliary control methods are effective strategies for mitigating *** promote the application of nickel-based superalloys,further research on the combination impact of multiple elements on cracking prevention and specific quantitative criteria for liquation cracking is necessary.

关键词： nickel-based superalloy fusion welding liquation cracking cracking mechanism cracking suppression

Effect of Cr_(2)O_(3) on properties of CaO-SiO_(2)-Fe_(t)O-MgO system and dissolution behavior of lime

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第4期31卷 870-881页

作者： shan-nan Li Jian-li Li yue Yu Hang-yu Zhu The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina Hubei Provincial Key Laboratory for New Processes of Ironmaking and Steelmaking Wuhan University of Science and TechnologyWuhan 430081HubeiChina Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education Wuhan University of Science and TechnologyWuhan 430081HubeiChina

The productivity of the chrome-containing semi-steel converter smelting process is directly affected by the slag-forming speed during the converter preliminary *** effects of Cr_(2)O_(3) content on the physicochemical properties of the CaO-SiO_(2)-Fe_(t)O-MgO system,such as melting temperature,solidification behavior,mineral composition,and lime dissolution rate,were *** results showed that the slag was an amorphous phase at 1500℃.When Cr_(2)O_(3) was added,Ca(Fe,Mg)Si_(2)O_(6) and spinel were formed in the *** the increase in Cr_(2)O_(3) content,the amount of spinel precipitation increased,and the dendritic FegO_(4) crystal gradually changed into the granular(Fe,Mg)(Fe,Cr)2O_(4) *** the Cr_(2)O_(3) content increased from O to 2.91 wt.%,the melting temperature of the slag rose,and the melting range of the slag expanded slightly,but the lime dissolution rate did not *** the Cr_(2)O_(3) content further increased to 9.09 wt.%,the melting temperature continued to rise,the melting range rapidly expanded,and the lime dissolution rate decreased.

关键词： Cr_(2)O_(3) Vanadium-titanium magnetite Converter Slag Lime dissolution

Algorithmic approach to discrete fracture network flow modeling in consideration of realistic connections in large-scale fracture networks

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rock Mechanics and Geotechnical Engineering 2024年第9期16卷 3798-3811页

作者： Qihua Zhang shan Dong Yaoqi Liu Junjie Huang Feng xiong Badong National Observation and Research Station of Geohazards China University of GeosciencesWuhan430074China SINOPEC shanghai Engineering Co. Ltd.Shanghai200120China Faculty of Engineering China University of GeosciencesWuhan430074China

Analyzing rock mass seepage using the discrete fracture network(DFN)flow model poses challenges when dealing with complex fracture *** paper presents a novel DFN flow model that incorporates the actual connections of large-scale ***,this model efficiently manages over 20,000 fractures without necessitating adjustments to the DFN *** geometric analyses,such as identifying connected fractures,dividing the two-dimensional domain into closed loops,triangulating arbitrary loops,and refining triangular elements,are fully *** analysis processes are comprehensively introduced,and core algorithms,along with their pseudo-codes,are outlined and explained to assist readers in their programming *** accuracy of geometric analyses is validated through topological graphs representing the connection relationships between *** practical application,the proposed model is employed to assess the water-sealing effectiveness of an underground storage cavern *** analysis results indicate that the existing design scheme can effectively prevent the stored oil from leaking in the presence of both dense and sparse ***,following extensive modification and optimization,the scale and precision of model computation suggest that the proposed model and developed codes can meet the requirements of engineering applications.

关键词： Discrete fracture network(DFN)flow model Geometric algorithm Fracture flow Water-sealing effect

Adverse effects of exposure to fine particles and ultrafine particles in the environment on different organs of organisms

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第1期135卷 449-473页

作者： Jianwei Zhang Zhao Chen Dan shan Yang Wu yue Zhao Chen Li yue Shu Xiaoyu Linghu Baiqi Wang Department of Occupational and Environmental Health School of Public HealthTianjin Medical UniversityTianjin 300070China Department of Medical Tianjin Stomatological HospitalSchool of MedicineNankai UniversityTianjin 300041China Tianjin Key Laboratory of Environment Nutrition and Public HealthTianjin 300070China National Demonstration Center for Experimental Preventive Medicine Education(Tianjin Medical University) Tianjin 300070China

Particulate pollution is a global risk factor that seriously threatens human *** particles(FPs)and ultrafine particles(UFPs)have small particle diameters and large specific surface areas,which can easily adsorb metals,microorganisms and other *** and UFPs can enter the human body in multiple ways and can be easily and quickly absorbed by the cells,tissues and *** the body,the particles can induce oxidative stress,inflammatory response and apoptosis,furthermore causing great adverse *** studies mainly take the population as the research object to study the distribution of diseases and health conditions in a specific population and to focus on the identification of influencing ***,the mechanism by which a substance harms the health of organisms is mainly demonstrated through toxicological *** epidemiological studies with toxicological studies will provide a more systematic and comprehensive understanding of the impact of PM on the health of *** this review,the sources,compositions,and morphologies of FPs and UFPs are briefly introduced in the first *** effects and action mechanisms of exposure to FPs and UFPs on the heart,lungs,brain,liver,spleen,kidneys,pancreas,gastrointestinal tract,joints and reproductive system are systematically *** addition,challenges are further pointed out at the end of the *** work provides useful theoretical guidance and a strong experimental foundation for investigating and preventing the adverse effects of FPs and UFPs on human health.

关键词： Fine particles Ultrafine particles Organs Adverse effect

Synthesis of poly(thiourethane-alt-thioester)by alternating ring-opening copolymerization of N-thiocarboxyanhydrides and episulfides

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第9期67卷 3091-3097页

作者： Wei xiong Tianjun yue Haiwang Lai Chunyan Lyu Weimin Ren Hua Lu Beijing National Laboratory for Molecular Sciences Center for Soft Matter Science and EngineeringKey Laboratory of Polymer Chemistry and Physics of Ministry of EducationCollege of Chemistry and Molecular EngineeringPeking UniversityBeijing 100871China State Key Laboratory of Fine Chemicals Dalian University of TechnologyDalian 116081China

Polythiourethanes(PTU)and polythioesters(PTE)derived from renewable sources are emerging sustainable polymers for their excellent degradability and ***,P(TU-alt-TE)copolymers have been rare and challenging to ***,we report the efficient synthesis of novel P(TU-alt-TE)copolymers via the alternating copolymerization of N-thiocarboxyanhydrides(NTA)/episufides(ES)and provide mechanistic insight into the alternating chain propagation process via density functional theory(DFT)*** incorporation of ESs into traditional peptide backbone is capable of adjusting the glass transition temperature below thermal decomposition temperature,which confers better thermal processability by regulating the rigidity of the backbone and the hydrogen bond interaction among the polymer *** PTUs with tailored properties are accessible by altering the feeding ratio of NTAs and(bifunctional)***,the thiourethane in the backbone can endow interesting underwater adhesion properties to the *** the broad scope of NTA and ES monomers,this method is expected to provide a promising and general route to a wide range of P(TU-alt-TE)copolymers with diverse properties.

关键词： poly(thiourethane-alt-thioester) alternating ring-opening copolymerization N-thiocarboxyanhydrides episulfides