检索结果-南通市图书馆

Building Simulation 2024年第2期17卷 207-221页

作者： xing.Hu Huibo Zhang Hui yu School of Design Shanghai Jiao Tong UniversityShanghai200240China

Wind-driven rain(WDR)has a significant influence on the hygrothermal performance,durability,and energy consumption of building *** calculation of WDR loads using semi-empirical models has been incorporated into the boundary conditions of coupled heat and moisture transfer ***,prior research often relied on fixed WDR absorption ratio,which fail to accurately capture the water absorption characteristics of porous building materials under rainfall ***,this study aims to investigate the coupled heat and moisture transfer of exterior walls under dynamic WDR boundary conditions,utilizing an empirically obtained WDR absorption ratio model based on field *** developed coupled heat and moisture transfer model is validated against the HAMSTAD *** findings reveal that the total WDR flux calculated with the dynamic WDR boundary is lower than that obtained with the fixed WDR boundary,with greater disparities observed in orientations experiencing higher WDR *** variations in moisture flow significantly impact the surface temperature and relative humidity of the walls,influencing the calculation of cooling and heating loads by different *** to the transient heat transfer model,the coupled heat and moisture transfer model incorporating dynamic WDR boundary exhibits maximum increases of 17.6%and 16.2%in cooling and heating loads,*** dynamic WDR boundary conditions provide more precise numerical values for surface moisture flux,offering valuable insights for the thermal design of building enclosures and load calculations for HVAC systems.

关键词： wind-driven rain building component hygrothermal model transient simulation cooling and heating loads

Sparse Modal Decomposition Method Addressing Underdetermined Vortex-Induced Vibration Reconstruction Problem for Marine Risers

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

China Ocean Engineering 2024年第2期38卷 285-296页

作者： DU Zun-feng ZHU Hai-ming yu Jian-xing State Key Laboratory of Hydraulic Engineering Intelligent Construction and Operation School of Civil EngineeringTianjin UniversityTianjin 300350China

When investigating the vortex-induced vibration(VIV)of marine risers,extrapolating the dynamic response on the entire length based on limited sensor measurements is a crucial step in both laboratory experiments and fatigue monitoring of real *** problem is conventionally solved using the modal decomposition method,based on the principle that the response can be approximated by a weighted sum of limited vibration ***,the method is not valid when the problem is underdetermined,i.e.,the number of unknown mode weights is more than the number of known *** study proposed a sparse modal decomposition method based on the compressed sensing theory and the Compressive Sampling Matching Pursuit(Co Sa MP)algorithm,exploiting the sparsity of VIV in the modal *** the validation study based on high-order VIV experiment data,the proposed method successfully reconstructed the response using only seven acceleration measurements when the conventional methods failed.A primary advantage of the proposed method is that it offers a completely data-driven approach for the underdetermined VIV reconstruction problem,which is more favorable than existing model-dependent solutions for many practical applications such as riser structural health monitoring.

关键词： motion reconstruction vortex-induced vibration(VIV) marine riser modal decomposition method compressed sensing

Kinetic-Thermodynamic Promotion Engineering toward High-Density Hierarchical and Zn-Doping Activity-Enhancing ZnNiO@CF for High-Capacity Desalination

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第8期16卷 35-50页

作者： Jie Ma Siyang xing.Yabo Wang Jinhu Yang Fei yu College of Marine Ecology and Environment Shanghai Ocean University201306 ShanghaiPeople’s Republic of China School of Civil Engineering Kashi University844000 KashiPeople’s Republic of China Research Center for Environmental Functional Materials College of Environmental Science and EngineeringTongji University1239 Siping Road200092 ShanghaiPeople’s Republic of China School of Chemical Science and Engineering Tongji University1239 Siping Road200092 ShanghaiPeople’s Republic of China Department of Energy Environmental&Chemical EngineeringWashington University in St.LouisSt.LouisMO 63130USA

Despite the promising potential of transition metal oxides(TMOs)as capacitive deionization(CDI)electrodes,the actual capacity of TMOs electrodes for sodium storage is significantly lower than the theoretical capacity,posing a major ***,we prepared the kinetically favorable Zn_(x)Ni_(1−x)O electrode in situ growth on carbon felt(Zn_(x)Ni_(1−x)O@CF)through constraining the rate of OH^(−)generation in the hydrothermal ***_(x)Ni_(1−x)O@CF exhibited a high-density hierarchical nanosheet structure with three-dimensional open pores,benefitting the ion transport/electron *** tuning the moderate amount of redox-inert Zn-doping can enhance surface electroactive sites,actual activity of redox-active Ni species,and lower adsorption energy,promoting the adsorption kinetic and thermodynamic of the Zn_(0.2)Ni_(0.8)O@*** from the kinetic-thermodynamic facilitation mechanism,Zn_(0.2)Ni_(0.8)O@CF achieved ultrahigh desalination capacity(128.9 mgNaCl g^(-1)),ultra-low energy consumption(0.164 kW h kgNaCl^(-1)),high salt removal rate(1.21 mgNaCl g^(-1) min^(-1)),and good *** thermodynamic facilitation and Na^(+)intercalation mechanism of Zn_(0.2)Ni_(0.8)O@CF are identified by the density functional theory calculations and electrochemical quartz crystal microbalance with dissipation monitoring,*** research provides new insights into controlling electrochemically favorable morphology and demonstrates that Zn-doping,which is redox-inert,is essential for enhancing the electrochemical performance of CDI electrodes.

关键词： Zinc-nickel metal oxide High-density hierarchical Capacitive deionization Zinc-doping

Optimized parameters of downhole all-metal PDM based on genetic algorithm

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第4期21卷 2663-2676页

作者： Jia-xing.Lu Ling-Rong Kong yu Wang Chao Feng yu-Lin Gao China University of Geosciences (Beijing) Key Laboratory on Deep Geo-Drilling Technology of Ministry of Natural Resources

Currently, deep drilling operates under extreme conditions of high temperature and high pressure,demanding more from subterranean power motors. The all-metal positive displacement motor, known for its robust performance, is a critical choice for such drilling. The dimensions of the PDM are crucial for its performance output. To enhance this, optimization of the motor's profile using a genetic algorithm has been undertaken. The design process begins with the computation of the initial stator and rotor curves based on the equations for a screw cycloid. These curves are then refined using the least squares method for a precise fit. Following this, the PDM's mathematical model is optimized, and motor friction is assessed. The genetic algorithm process involves encoding variations and managing crossovers to optimize objective functions, including the isometric radius coefficient, eccentricity distance parameter,overflow area, and maximum slip speed. This optimization yields the ideal profile parameters that enhance the motor's output. Comparative analyses of the initial and optimized output characteristics were conducted, focusing on the effects of the isometric radius coefficient and overflow area on the motor's performance. Results indicate that the optimized motor's overflow area increased by 6.9%, while its rotational speed reduced by 6.58%. The torque, as tested by Infocus, saw substantial improvements of38.8%. This optimization provides a theoretical foundation for improving the output characteristics of allmetal PDMs and supports the ongoing development and research of PDM technology.

关键词： Positive displacement motor Genetic algorithm Profile optimization Matlab programming Overflow area

Surface decoration of mesocarbon microbeads with multifunctional TiNbO_(4-x)@C coating layer as high rate and stable anode of Li-ion batteries

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第5期43卷 2053-2066页

作者： Jia-Mei Lai Zhi-Min Zou yu Bai yu-Tao xing.Chun-Hai Jiang Fujian Provincial Key Laboratory of Functional Materials and Applications Institute of Advanced Energy MaterialsSchool of Materials Science and EngineeringXiamen University of TechnologyXiamen 361024China Shanghai XFH Science and Technology Development Co. Ltd.Shanghai 200949China Fujian XFH New Energy Materials Co. Ltd.Yong'an 366000China Shenzhen XFH Science and Technology Co. Ltd.Shenzhen 518071China Laboratorio de Microscopia Eletronica de Alta Resolucao Centro de Caracterizagao Avangada Para a Industria de Petroleo(LaMAR/CAIPE)Universidade Federal FluminenseNiteroiRJ 24210-346Brazil

Surface modification of graphite anode with electroactive matters has been proven of a more practical strategy in enhancing the performance of Li-ion batteries than exploring alternative novel anode ***,rutile TiNbO_(4-x) nanoparticles with a tunnel structure are employed as multifunctional decoration substances in combination with a carbon coating layer to improve the rate and cycle properties of mesocarbon microbeads(MCMBs).As compared to pristine MCMB,the Li^(+)diffusion coefficients of the composite anodes are enhanced due to the synergistic effect of TiNbO_(4-x)@***,the overcharge and voltage polarization of the composite anodes at high rate are obviously minimized due to the current sharing effect of the high-potential TiNbO_(4-x).Moreover,the amorphous Li_(y)TiNbO_(4-x) converted from TiNbO_(4-x) in the initial lithiation process can deliver pseudocapacitive capacity to the composite anodes from the second *** of these functions of TiNbO_(4-x)@Ccoating layer have directly contributed to the improved rate and cycle performance of the MCMB/TiNbO_(4-x)@C composite *** one containing 12.0 wt%TiNbO_(4-x) exhibits a high reversible specific capacity of 118 m Ah·g^(-1)at 10C(1C=372 m A·g^(-1)),together with a high capacity retention of 90.9%after 300 cycles at 3C,which are all much superior to those of pristine MCMB.

关键词： Li-ion batteries MCMB TiNbO_(4-x)@C Surface decoration Rate capability

Microstructure recognition of steels by machine learning based on visual attention mechanism

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第4期31卷 909-923页

作者： xing.yu Chen Lin Cheng Cheng-yang Hu yu-peng Zhang Kai-ming Wu The State Key Laboratory of Refractories and Metallurgy Hubei Province Key Laboratory of Systems Science on Metallurgical ProcessingInternational Research Institute for Steel TechnologyCollaborative Center on Advanced SteelsWuhan University of Science and TechnologyWuhan 430081HubeiChina Metals Valley and Band(Foshan)Metallic Composite Materials Co. Ltd.Foshan 528000GuangdongChina

U-Net has achieved good performance with the small-scale datasets through skip connections to merge the features of the low-level layers and high-level layers and has been widely utilized in biomedical image segmentation as well as recent microstructure image segregation of the *** representative visual attention mechanism modules,named as squeeze-and-excitation networks,convolutional block attention module,and extended calibration algorithm,were intro-duced into the traditional U-Net architecture to further improve the prediction *** is found that compared with the original U-Net architecture,the evaluation index of the improved U-Net architecture has been significantly improved for the microstructure segmentation of the steels with the ferrite/martensite composite microstructure and pearlite/ferrite composite microstructure and the complex martensite/austenite island/bainite microstructure,which demonstrates the advantages of the utilization of the visual attention mechanism in the microstructure *** reasons for the accuracy improvement were discussed based on the feature maps analysis.

关键词： Microstructure recognition-Steel Machine learning Visual attention mechanism Visualization

Numerical Simulation of the Mass Movement Process of the 2018 Sedongpu Glacial Debris Flow by Using the Fluid-Solid Coupling Method

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Earth Science 2024年第2期35卷 583-596页

作者： xing.yu Long yu-Xiang Hu Bin-Rui Gan Jia-Wen Zhou State Key Laboratory of Hydraulics and Mountain River Engineering Sichuan UniversityChengdu610065China College of Water Resource and Hydropower Sichuan UniversityChengdu610065China

In the context of global warming and intensified human activities,glacier instability in plateau regions has increased,and glacier debris flows have become active,which poses a significant threat to the lives and property of people and socioeconomic *** mass movement process of glacier debris flows is extremely complex,so this paper uses the 2018 Sedongpu glacier debris flow event on the Qinghai-Tibet Plateau as an example and applies a numerical simulation method to invert the whole process of mass *** view of the interaction between phases in the process of motion,we use the fluid-solid coupling method to describe the mass *** granular-flow model and drift-flux model are employed in FLOW3D software to study the mass movement process of glacier debris flows and explore their dynamic *** results indicate that the glacier debris flow lasted for 700 s,and the movement process was roughly divided into four stages,including initiation,scraping,surging and deposition;the depositional characteristics calculated by the fluid-solid coupling model are consistent with the actual survey results and have good reliability;strong erosion occurs during the mass movement,the clear volume amplification effect,and the first wave climbs 17.8 m across the *** fluid-solid coupling method can better simulate glacier debris flows in plateau regions,which is helpful for the study of the mechanism and dynamic characteristics of such disasters.

关键词： glacial debris flow Qinghai-Tibet Plateau fluid-solid coupling FLOW3D mass movement depositional characteristics disasters engineering geology

Early embryonic failure caused by a novel mutation in the TUBB8 gene:A case report

在线全文

学校读者我要写书评

暂无评论

World Journal of Clinical Cases 2024年第12期12卷 2092-2098页

作者： Xiao-yu Zhang xing.xing.Zhang Lei Wang Department of Reproductive Center Zaozhuang Maternal and Child Healthcare HospitalZaozhuang 277000Shandong ProvinceChina

BACKGROUND This study aimed to explore the relationship between gene mutations and early embryonic development arrest and to provide more possibilities for the diagnosis and treatment of repeated implantation *** SUMMARY Here,we collected and described the clinical data of a patient with early embryonic development stagnation after repeated in vitro fertilization attempts for primary infertility at the Department Reproductive Center of Zaozhuang Maternal and Child Healthcare *** also detected the whole-exon gene of the patient's spouse and parents,and conducted bioinformatics analysis to determine the pathogenesis of the *** A novel mutant of the TUBB8 gene[c.602G>T(p.C201F)]was identified,and this mutant provided new data on the genotype-phenotype relationships of related diseases.

关键词： Genes Mutation Embryonic development Fertilization in vitro Intracytoplasmic sperm injection Case report

Intrinsic lithiophilic carbon host derived from bacterial cellulose nanofiber for dendrite-free and long-life lithium metal anode

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第5期17卷 4203-4210页

作者： Gangyi Xiong Jiayu yu Yalan xing.Puheng Yang Shichao Zhang School of Materials Science and Engineering Beihang UniversityBeijing 100191China School of Physics Science and Nuclear Energy Engineering Beihang UniversityBeijing 100191China

Although lithium metal is considered a promising anode for advanced Li-S and Li-air batteries,the uncontrolled dendrite growth and infinite volume change impede its practical ***,we report an ideal framework composed of carbonized bacterial cellulose(CBC)nanofibers,which shows intrinsic lithiophilicity to molten lithium without any lithiophilic surface *** wetting behavior of molten lithium can be significantly improved because its surface functional groups provide thermodynamical driving force,and the high surface roughness derived from nanocracks leads to rapid infusion in *** hybrid anode exhibits long cycle life up to 2000 h and excellent deep stripping-platting capacity up to 20 mAh·cm^(-2).When the anode is assembled with LiFePO_(4) cathode,the full cell delivers a good cycling stability up to 700 *** is attributed to the intrinsic lithiophilic scaffold,which can not only lower the nucleation barrier of Li and provide uniform nucleation sites for stable Li stripping/plating,but also offer interspace to accommodate volume fluctuation of lithium during long *** work provides a new manner to achieve a series of intrinsic lithiophilic carbon skeletons based on the large family of biomass materials and organic materials.

关键词： intrinsic lithiophilicity lithium metal anode bacterial cellulose lithium dendrite long cycling life

Collective Movement Simulation:Methods and Applications

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Machine Intelligence Research 2024年第3期21卷 452-480页

作者： Hua Wang xing.yu Guo Hao Tao Ming-Liang Xu School of Computer and Artificial Intelligence Zhengzhou UniversityZhengzhou450001China Engineering Research Center of Intelligent Swarm Systems Ministry of EducationZhengzhou450001China National Supercomputing Center in Zhengzhou Zhengzhou450001China China Ship Development and Design Center Wuhan430060China

Collective movement simulations are challenging and important in many areas,including life science,mathematics,physics,information science and public *** this survey,we provide a comprehensive review of the state-of-the-art techniques for collective movement *** start with a discussion on certain concepts to help beginners understand it more ***,we analyze the intelligence among different collective objects and the emphasis in different ***,we classify existing collective movement simulation methods into four categories according to their effects,namely versatility,accuracy,dynamic adaptability,and assessment feedback ***,we introduce five applications of layout optimization,emergency control,dispatching,unmanned systems,and other derivative ***,we summarize possible future research directions.

关键词： Collective movement simulation multiple objects multiple discipline simulation effect collective intelligence