检索结果-南通市图书馆

Microstructure evolution and strengthening mechanism of high -performance powder metallurgy TA15 titanium alloy by hot rolling

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1426-1436页

作者： Ying Gao Ce zhang Jiazhen zhang xin Lu beijing Advanced Innovation Center for Materials Genome Engineering State Key Laboratory for Advanced Metals and MaterialsInstitute for Advanced Ma-terials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China National Engineering Research Center for Advanced Rolling Technology National Engineering Research Center for Flat Rolling EquipmentInstitute of Engin-eering TechnologyUniversity of Science and Technology BeijingBeijing 100083China

Hot deformation of sintered billets by powder metallurgy(PM)is an effective preparation technique for titanium alloys,which is more significant for high-alloying *** this study,Ti–6.5Al–2Zr–Mo–V(TA15)titanium alloy plates were prepared by cold press-ing sintering combined with high-temperature hot *** microstructure and mechanical properties under different process paramet-ers were *** microscope,electron backscatter diffraction,and others were applied to characterize the microstructure evolution and mechanical properties strengthening *** results showed that the chemical compositions were uniformly dif-fused without segregation during sintering,and the closing of the matrix craters was accelerated by increasing the sintering *** block was hot rolled at 1200℃ with an 80%reduction under only two passes without *** strength and elongation of the plate at 20–25℃ after solution and aging were 1247 MPa and 14.0%,respectively,which were increased by 24.5%and 40.0%,respect-ively,compared with the as-sintered alloy at 13.0℃.The microstructure was significantly refined by continuous dynamic recrystalliza-tion,which was completed by the rotation and dislocation absorption of the substructure surrounded by low-angle grain *** hot rolling combined with heat treatment,the strength and plasticity of PM-TA15 were significantly improved,which resulted from the dense,uniform,and fine recrystallization structure and the synergistic effect of multiple slip systems.

关键词： elemental powder powder metallurgy titanium alloy hot rolling strength and plasticity

Recent advances in high charge density triboelectric nanogenerators

在线全文

学校读者我要写书评

暂无评论

International Journal of Extreme Manufacturing 2024年第4期6卷 1-19页

作者： xin Cui Jiaheng Nie Yan zhang School of Physics University of Electronic Science and Technology of ChinaChengdu 611731People's Republic of China School of Cybersecurity Chengdu University of Information TechnologyChengdu 610225People's Republic of China beijing institute of Nanoenergy and Nanosystems Chinese Academy of SciencesBeijing 100083People's Republic of China School of Nanoscience and Technology University of Chinese Academy of SciencesBeijing 100049People's Republic of China

Triboelectric materials with high charge density are the building-block for the commercial application of triboelectric nanogenerators(TENGs).Unstable dynamic processes influence the change of the charge density on the surface and inside of triboelectric *** charge density of triboelectric materials depends on the surface and the internal charge transfer *** focus of this review is on recent advances in high charge density triboelectric materials and advances in the fabrication of *** summarize the existing strategies for achieving high charge density in triboelectric materials as well as their fundamental *** then review current optimization methods for regulating dynamic charge transfer processes to increase the output charge density:first,increasing charge injection and limiting charge dissipation to achieve a high average surface charge density,and second,regulating the internal charge transfer process and storing charge in triboelectric materials to increase the output charge ***,we present the challenges and prospects in developing high-performance triboelectric materials.

关键词： triboelectric nanogenerator charge density charge transfer charge store

Threshold Selection and Resource Allocation for Quantized Identification

在线全文

学校读者我要写书评

暂无评论

Journal of Systems Science & Complexity 2024年第1期37卷 204-229页

作者： WANG Ying LI xin ZHAO Yanlong zhang Ji-Feng Key Laboratory of Systems and Control Institute of Systems ScienceAcademy of Mathematics and Systems ScienceChinese Academy of SciencesBeijing 100190China School of Mathematical Sciences University of Chinese Academy of SciencesBeijing 100049China

This paper is concerned with the optimal threshold selection and resource allocation problems of quantized identification, whose aims are improving identification efficiency under limited resources. Firstly, the first-order asymptotically optimal quantized identification theory is extended to the weak persistent excitation condition. Secondly, the characteristics of time and space complexities are established based on the Cramér-Rao lower bound of quantized systems. On these basis, the optimal selection methods of fixed thresholds and adaptive thresholds are established under aperiodic signals, which answer how to achieve the best efficiency of quantized identification under the same time and space complexity. In addition, based on the principle of maximizing the identification efficiency under a given resource, the optimal resource allocation methods of quantized identification are given for the cases of fixed thresholds and adaptive thresholds, respectively, which show how to balance time and space complexity to realize the best identification efficiency of quantized identification.

关键词： Quantized output resource allocation system identification threshold selection.

Experimental and numerical flutter analysis of a folding fin with multiple asymmetric free-plays

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第5期37卷 332-348页

作者： Chenyu LIU Chao AN Changchuan XIE xin zhang Lan YANG School of Aeronautic Science and Engineering Beihang UniversityBeijing 100191China beijing institute of Electronic System Engineering Beijing 100854China beijing institute of Astronautical Systems Engineering Beijing 100076China

Experimental folding fin models with an adjustable free-play are tested in a wind *** fin structure is modeled using the free-interface component mode synthesis method,and its free-play is modeled as four independent nonlinear springs with asymmetric stiffness.A nonplanar unsteady vortex-lattice method considering compressibility is employed to address nonlinear deformation and high subsonic *** spline interpolation is improved through projection and *** aeroelastic characteristics of folding fins with different free-play magnitudes,initial conditions and elastic-axis positions are analyzed using an established time-marching method because of its relatively small computation scale and high *** results show good consistency among the presented method,the wind tunnel test and the harmonic balance *** is a negative correlation between the critical speed of divergent motion and the ratio of the initial condition to the free-play *** either the free-play magnitude or the initial condition is extreme(tiny or vast),the system nonlinearity degenerates to ***,the flutter prevention design of a linear model can be applied to a nonlinear model,such as moving the elastic-axis position *** presented fin configuration exhibits an unstable limit cycle oscillation because the orders of coupled flutter modes do not change with variations in equivalent linear stiffness.

关键词： Free-play Limit cycle oscillation Flutter Component mode synthesis Vortex-lattice method

Height and body mass index trajectories from 1975 to 2015 and prevalence of stunting,underweight and obesity in 2016 among children in Chinese cities:findings from five rounds of a national survey

在线全文

学校读者我要写书评

暂无评论

World Journal of Pediatrics 2024年第4期20卷 404-412页

作者： xin‑Nan Zong Hui Li Ya‑Qin zhang Department of Growth and Development Capital Institute of PediatricsBeijing 100020China

Background A more comprehensive assessment of growth and nutrition in children is required in china.due to rapid socioeconomic *** aimed to investigate height and body mass index(BMI)trajectories from 1975 to 2015 and the prevalence of stunting and obesity in 2016 among children in Chinese *** A total of 904,263.children from birth to 6.9 years were collected from a series of nationally representative surveys in *** and BMI trajectories and prevalence of stunting,underweight,overweight and obesity were *** The average height level of Chinese urban children under 7 years presented a positive secular trend from 1975 to 2015;however,a slowing tendency occurred in 2005‒*** apparent increase was observed at the 5th,50th and 95th percentiles of BMI in urban children aged 3.years and older,with a more prominent increase at the 95th *** total prevalence of stunting and underweight under 7 years was 1.4%and 2.0%,*** total prevalence of overweight and obesity under 7 years was 12.6%and 4.3.,respectively,with 12.7%and 4.9%for boys,12.6%and 3.6%for girls,12.1%and 4.0%in urban areas and 13.1%and 4.5%in suburban rural *** The average height level of Chinese urban children has reached World Health Organization child growth standards since 2005 and presented a slowing tendency in secular trend in 2005‒*** attention and efforts and public health interventions should be urgently made to combat overweight and obesity among preschool children.

关键词： Body mass index Children Height Obesity Stunting

Effect of Interface Form on Creep Failure and Life of Dissimilar Metal Welds Involving Nickel-Based Weld Metal and Ferritic Base Metal

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Mechanical Engineering 2024年第1期37卷 265-285页

作者： Xiaogang Li Junfeng Nie xin Wang Kejian Li Haiquan zhang institute of Nuclear and New Energy Technology Key Laboratory of Advanced Reactor Engineering and Safety of Ministry of EducationTsinghua UniversityBeijing 100084China Department of Mechanical Engineering Tsinghua UniversityBeijing 100084China

For dissimilar metal welds(DMWs)involving nickel-based weld metal(WM)and ferritic heat resistant steel base metal(BM)in power plants,there must be an interface between WM and BM,and this interface suffers mechanical and microstructure mismatches and is often the rupture location of premature *** this study,a new form of WM/BM interface form,namely double Y-type interface was designed for the *** behaviors and life of DMWs containing double Y-type interface and conventional I-type interface were compared by finite element analysis and creep tests,and creep failure mechanisms were investigated by stress-strain analysis and microstructure *** applying double Y-type interface instead of conventional I-type interface,failure location of DMW could be shifted from the WM/ferritic heat-affected zone(HAZ)interface into the ferritic HAZ or even the ferritic BM,and the failure mode change improved the creep life of *** interface premature failure of I-type interface DMW was related to the coupling effect of microstructure degradation,stress and strain concentrations,and oxide notch on the WM/HAZ *** creep failure of double Y-type interface DMW was the result of Type IV fracture due to the creep voids and micro-cracks on fine-grain boundaries in HAZ,which was a result of the matrix softening of HAZ and lack of precipitate pinning at fine-grain *** double Y-type interface form separated the stress and strain concentrations in DMW from the WM/HAZ interface,preventing the trigger effect of oxide notch on interface failure and inhibiting the interfacial microstructure *** is a novel scheme to prolong creep life and enhance reliability of DMW,by means of optimizing the interface form,decoupling the damage factors from WM/HAZ interface,and then changing the failure mechanism and shifting the failure location.

关键词： Dissimilar metal weld Nickel-based weld metal Ferritic heat resistant steel Interface Creep strain Microstructure Failure mechanism Creep life

Comparative Analysis of Diagonal and Centrifugal Compressors with Synergy Theory in Compressed Air Energy Storage System

在线全文

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第4期33卷 1325-1339页

作者： zhang Yuxin ZUO Zhitao ZHOU xin GUO Wenbin CHEN Haisheng institute of Engineering Thermophysics Chinese Academy of SciencesBeijing100190China University of Chinese Academy of Sciences Beijing100049China National Energy Large Scale Physical Energy Storage Technologies R&D Center of Bijie Bijie551700China Nanjing institute of Future Energy System IETCASNanjing211135China

Energy storage technology is an essential part of the efficient energy *** air energy storage(CAES)is considered to be one of the most promising large-scale physical energy storage *** is favored because of its low-cost,long-life,environmentally friendly and low-carbon *** compressor is the core component of CAES,and the performance is critical to the overall system *** importance is not only reflected in the design point,but also in the continuous efficient operation under variable working *** diagonal compressor is currently the focus of the developing large-scale CAES because of its stronger flow capacity compared with traditional centrifugal *** the diagonal compressor has the higher single stage pressure ratio compared with axial *** this paper,the full three dimensional numerical simulation technologies with synergy theory are used to compare and analyze the internal flow *** performance of the centrifugal and diagonal impellers that are optimized under the same requirements for large-scale CAES has been *** relationship between the internal flow characteristics and performance of the centrifugal and diagonal impellers with the change of mass flow rates and total inlet temperature is given qualitatively and *** the cosine value of the synergy angle is high,the local flow loss is *** smaller proportion of the positive area is the pursuit of *** comparative analysis,it is concluded that the internal flow and performance changes of centrifugal and diagonal impellers are *** results confirm the superiority and feasibility of the off-design performance of the diagonal compressor applied to the developing large-scale CAES.

关键词： compressed air energy storage synergy theory diagonal compressor centrifugal compressor comparative analysis

Comparison of tailpipe carbonyls and volatile organic compounds emissions from in-use gasoline/CNG bi-fuel vehicles

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第1期135卷 619-629页

作者： Jiachen Li Yunshan Ge xin Wang Mengzhu zhang Haohao Wang School of Mechanical Engineering Beijing Institute of TechnologyBeijing 100081China

Ground-level ozone contamination has been globally an urban air quality issue,particularly for china.which has recently made significant progress in purifying its *** exhaust emissions from motor vehicles,predominantly carbonyls and volatile organic compounds(VOCs),are among the leading contributors to ozone *** this chassislevel study,the unregulated emissions from five china.5 certified gasoline/CNG bi-fuel taxis,along with their ozone forming potential(OFP),were *** is found that carbonyls and VOCs were mainly emitted during the starting phase no matter the engine was cold or *** to gasoline,CNG fueling reduced VOCs emissions on a large scale,especially in the starting phase,but had elevated *** a fleet average,CNG fueling derived 15%and 46%less OFP than gasoline in cold-and hot-start tests,*** contributed to over 90%of the total OFP of the *** terms of alleviating ground-level ozone contamination,CNG is a feasible alternative to gasoline on light-duty vehicles.

关键词： CNG Gasoline Carbonyls VOCs OFP

Theoretical understanding of correlation between magnetic phase transition and the superconducting dome in high-Tc cuprates

在线全文

学校读者我要写书评

暂无评论

Science china.Physics,Mechanics & Astronomy) 2024年第2期67卷 167-173页

作者： Chen zhang Cai-xin zhang Su-Huai Wei Haiqing Lin Hui-Xiong Deng State Key Laboratory of Superlattices and Microstructures Institute of SemiconductorsChinese Academy of SciencesBeijing 100083China Center of Materials Science and Optoelectronics Engineering University of Chinese Academy of SciencesBeijing 100049China beijing Computational Science Research Center Beijing 100193China

Many issues concerning the origin of high-temperature superconductivity(HTS)are still under *** example,how the magnetic order varies with doping and its relationship with the superconducting temperature(Tc);and why Tcalways peaks near the quantum critical *** this paper,taking hole-doped La_(2)CuO_(4)as a classical example,we employ the first-principles band structure and total energy calculations with Monte Carlo simulations to explore how the symmetry-breaking magnetic ground state evolves with hole doping and the origin of a dome-shaped superconductivity region in the phase *** demonstrate that the local antiferromagnetic order and doping play key roles in determining the electron-phonon coupling,thus ***,the La_(2)CuO_(4)possesses a checkerboard local antiferromagnetic ground *** the hole doping increases,Tcincreases with the enhanced electron-phonon coupling *** as the doping increases further,the strength of the antiferromagnetic interaction weakens and spin fluctuation *** the critical doping level,a magnetic phase transition occurs that reduces the local antiferromagnetism-assisted electron-phonon coupling,thus diminishing the *** superconductivity disappears in the heavily overdoped region when the ferromagnetic order *** observations could account for why cuprates have a dome-shaped superconductivity region in the phase *** study,thus,contributes to a fundamental understanding of the correlation between doping,local magnetic order,and superconductivity of HTS.

关键词： high-temperature superconductivity antiferromagnetic order electron-phonon coupling doping effect cuprates