检索结果-南通市图书馆

Reconfigurable Compact Wideband Circularly Polarised Dielectric Resonator Antenna for Wireless Applications

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2021年第8期68卷 2095-2109页

作者： Shahid Khan xin cheng ren Haider Ali Camel Tanougast Abdul Rauf Safdar Nawaz Khan Marwat Muhammad Rizwan Anjum LCOMS ASECUniversity de LorraineMetz57070France School of Physics and Electronic Information Yanan UniveristyYanan761000China Department of Electronics Technology University of TechnologyNowshera24100Pakistan Department of Electrical Engineering National University of Sciences and TechnologyIslamabad44000Pakistan Department of Computer Systems Engineering University of Engineering and TechnologyPeshawar25120Pakistan Department of Electronic Engineering The Islamia University of BahawalpurBahawalpur63100Pakistan

In this work,a novel compact wideband reconfigurable circularly polarised(CP)dielectric resonator antenna(DRA)is *** L-shaped Dielectric resonator antenna is excited by an inverted question mark shaped *** arrangement of feed-line helps to generate two orthogonal modes inside the DR,which makes the design circularly polarised.A thin micro-strip line placed on the defected ground plane not only helps to generate a wideband response but also assist in the positioning of the two diode *** switches located at the left and right of the micro-strip line helps in performing two switching *** novel compact design offers the reconfigurability between 2.9–3.8 GHz which can be used for different important wireless *** the switching operation I,the achieved impedance bandwidth is 24%while axial ratio bandwidth(ARBW)is 42%.For this switching state,the design has 100%CP ***,the switching operation II achieves 60%impedance bandwidth and 58.88%ARBW with 76.36%CP *** proposed design has a maximum measured gain of 3.4 dBi and 93%radiation *** proposed design is novel in terms of compactness and performance *** prototype is fabricated for the performance analysis which shows that the simulated and measured results are in close agreement.

关键词： Circularly polarized DRA ARBW bandwidth gain radiation efficiency

An Innovative Coupled Common-Node Discrete Element Method-Smoothed Particle Hydrodynamics Model Developed with LS-DYNA and Its Applications

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

China Ocean Engineering 2024年第3期38卷 467-482页

作者： SHEN Zhong-xiang WANG Wen-qing XU cheng-yue LUO Jia-xin LIU ren-wei School of Naval Architecture and Ocean Engineering Jiangsu University of Science and TechnologyZhenjiang 212100China College of Harbor Coastal and Offshore EngineeringHohai UniversityNanjing 210098China

In this study,a common-node DEM-SPH coupling model based on the shared node method is proposed,and a fluid–structure coupling method using the common-node discrete element method-smoothed particle hydrodynamics(DS-SPH)method is developed using LS-DYNA *** DEM and SPH are established on the same node to create common-node DEM-SPH particles,allowing for fluid–structure *** simulations of various scenarios,including water entry of a rigid sphere,dam-break propagation over wet beds,impact on an ice plate floating on water and ice accumulation on offshore structures,are *** interaction between DS particles and SPH fluid and the crack generation mechanism and expansion characteristics of the ice plate under the interaction of structure and fluid are also *** results are compared with available data to verify the proposed coupling ***,the simulation results demonstrated that controlling the cutoff pressure of internal SPH particles could effectively control particle splashing during ice crushing failure.

关键词： common-node DEM-SPH fluid-structure interaction discrete element method smoothed particle hydrodynamics

High-Performance and Large-Area Inverted Perovskite Solar Cells Based on NiO_(x) Films Enabled with A Novel Microstructure-Control Technology

在线全文

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第1期7卷 153-159页

作者： Guibin Shen xin Li Yuqin Zou Hongye Dong Dongping Zhu Yanglin Jiang xin ren Ng Fen Lin Peter Müller-Buschbaum cheng Mu Key Laboratory of Advanced Light Conversion Materials and Biophotonics Department of ChemistryRenmin University of ChinaBeijing 100872China Solar Energy Research Institute of Singapore(SERIS) National University of SingaporeSingapore 117574Singapore Physik-Department Lehrstuhl für Funktionelle MaterialienTechnische Universität MünchenJames-Franck-Straße 185748Garching Germany Heinz Maier-Leibnitz Zentrum(MLZ) Technische Universität MünchenLichtenbergstr.185748Garching Germany

The improvement in the efficiency of inverted perovskite solar cells(PSCs)is significantly limited by undesirable contact at the NiO_(x)/perovskite *** this study,a novel microstructure-control technology is proposed for fabrication of porous NiO_(x)films using Pluronic P123 as the structure-directing agent and acetylacetone(AcAc)as the coordination *** synthesized porous NiO_(x)films enhanced the hole extraction efficiency and reduced recombination defects at the NiO_(x)/perovskite ***,without any modification,the power conversion efficiency(PCE)of the PSC with MAPbl_(3)as the absorber layer improved from 16.50%to 19.08%.Moreover,the PCE of the device composed of perovskite Cs0.05(MA_(0.15)FA_(0.85))_(0.95)Pb(I_(0.85)Br_(0.15))_(3)improved from 17.49%to 21.42%.Furthermore,the application of the fabricated porous NiO_(x)on fluorine-doped tin oxide(FTO)substrates enabled the fabrication of large-area PSCs(1.2 cm^(2))with a PCE of 19.63%.This study provides a novel strategy for improving the contact at the NiO_(x)/perovskite interface for the fabrication of high-performance large-area perovskite solar cells.

关键词： interfacial contact inverted and large-area perovskite solar cells photovoltaic materials porous NiO_(x)films renewable energy

Model-driven path planning for robotic plasma cutting of branch pipe with single Y-groove based on pipe-rotating scheme

在线全文

学校读者我要写书评

暂无评论

Advances in Manufacturing 2024年第1期12卷 94-107页

作者： Yan Liu Qiu Tang xin-cheng Tian School of Control Science and Engineering Shandong UniversityJinan250061People’s Republic of China Engineering Research Center of Intelligent Unmanned System Ministry of EducationJinan250061People’s Republic of China School of Mechanical and Electronic Engineering Shandong Jianzhu UniversityJinan250101People’s Republic of China

The automatic cutting of intersecting pipes is a challenging task in *** improved automation and accuracy,this paper proposes a model-driven path planning approach for the robotic plasma cutting of a branch pipe with a single ***,it summarizes the intersection forms and introduces a dual-pipe intersection *** on this model,the moving three-plane structure(a description unit of the geometric characteristics of the intersecting curve)is constructed,and a geometric model of the branch pipe with a single Y-groove is ***,a novel mathematical model for plasma radius and taper compensation is ***,the compensation model and groove model are integrated by establishing movable ***,to prevent collisions between the plasma torch and workpiece,the torch height is planned and a branch pipe-rotating scheme is *** the established models and moving frames,the planned path description of cutting robot is provided in this novel *** accuracy of the proposed method is verified by simulations and robotic cutting experiments.

关键词： Automatic groove cutting of intersecting pipes Model-driven robot path planning Plasma beam radius and taper compensation

Low-temperature-pyrolysis preparation of nanostructured graphite towards rapid potassium storage with high initial Coulombic efficiency

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第6期17卷 5138-5147页

作者： Jingke ren Boyu xing Wen Luo Binyang Luo xinfei Wu xin Yan Wencong Feng Feiyue Wang Chaojie cheng Liqiang Mai State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Department of Physics School of ScienceWuhan University of TechnologyWuhan 430070China

Industrially prepared artificial graphite(AG)is attractive for potassium-ion batteries(PIBs),but its rate performance is poor and the production process is energy intensive,so developing an efficient strategy to produce novel graphite with low energy consumption and high performance is economically ***,a nanostructured graphite composed of multi-walled carbon nanotubes(MWCNTs)and graphite shells was prepared by one-pot method through low-temperature pyrolysis of iron-based metal-organic framework(MOF)and carbon *** high graphitization degree of nanostructured graphite makes the initial Coulombic efficiency(ICE)exceed 80%,and the three-dimensional(3D)conductive network ensures a specific capacity of 234 mAh·g^(−1)after 1000 cycles at a high current density of 500 mA·g^(−1).In addition,the typical graphite potassium storage mechanism is also demonstrated by in situ X-ray diffraction(XRD)and in situ Raman spectroscopy,and its practicality is also proved by the voltage of the full *** work provides a feasible way to optimize the practical production process of AG and expand its application in energy storage.

关键词： graphite anode potassium-ion batteries high graphitization degree low-temperature pyrolysis initial Coulombic efficiency

Selection Method for New Energy Output Guaranteed Rates Considering Optimal Energy Storage Configuration

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2024年第2期10卷 539-547页

作者： xin cheng Tong Wu Wei Yao Yan Yang Guangdong Power Grid Corporation Guangzhou 510620China State Key Laboratory of Advanced Electromagnetic Engineering and Technology and School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430074China

The output of new energy represented by wind power and photovoltaic power features volatility and randomness. It is a practical approach to use the guaranteed rate with statistical characteristics to analyze the output coefficient of new energy. However, there is a lack of analysis and demonstration on the value of the new energy output guaranteed rate. To solve this problem, a selection method for the new energy output guaranteed rate considering optimal energy storage configuration is proposed. First, the influence of the new energy output guaranteed rate on the new energy output coefficient is analyzed. Secondly, with the goal of minimizing the comprehensive costs, an optimal configuration model of energy storage based on the output guaranteed rate of new energy is constructed, and particle swarm optimization is used for the optimization solution. Then, according to the optimal energy storage configuration results under different guaranteed rates, a reasonable new energy output guaranteed rate is determined by maximizing the comprehensive benefits obtained from energy storage. Finally, an example applied to the power grid in an area of Guangdong in Southern China is provided to illustrate the effectiveness of the proposed method.

关键词： Energystorage optimization guaranteed output guaranteed rate new energy consumption

Experimental Investigation on Vertical Hydraulic Transport of Ores in Deepsea Mining

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

China Ocean Engineering 2024年第1期38卷 42-53页

作者： LIU Lei LIU Jian-cheng LI xin XU Li-xin ZHANG Xiu-zhan State Key Laboratory of Ocean Engineering Shanghai Jiao Tong UniversityShanghai 200240China School of Naval Architecture Ocean and Civil EngineeringShanghai Jiao Tong UniversityShanghai 200240China Sanya Yazhou Bay Institution of Deep-sea Sci-Tech Shanghai Jiao Tong UniversitySanya 572000China China Merchants Marine And Offshore Research Institute Co. Ltd.Shenzhen 518067China China Merchants Deepsea Research Institute(Sanya)Co. Ltd.Sanya 572000China School of Naval Architecture and Ocean Engineering Jiangsu University of Science and TechnologyZhenjiang 212100China

Deepsea mining has been proposed since the 1960s to alleviate the lack of resources on *** hydraulic transport of collected ores from the seabed to the sea surface is considered the most promising method for industrial *** the present study,an indoor model test of the vertical hydraulic transport of particles was conducted.A noncontact optical method has been proposed to measure the local characteristics of the particles inside a vertical pipe,including the local concentration and particle *** hydraulic gradient of ore transport was evaluated with various particle size distributions,particle densities,feeding concentrations and mixture flow *** transport,the local concentration is larger than the feeding concentration,whereas the particle velocity is less than the mixture *** qualitative effects of the local concentration and local fluid velocity on the particle velocity and slip velocity were *** local fluid velocity contributes significantly to particle velocity and slip velocity,whereas the effect of the local concentration is marginal.A higher feeding concentration and mixture flow velocity result in an increased hydraulic *** effect of the particle size gradation is slight,whereas the particle density plays a crucial role in the transport.

关键词： deepsea mining vertical hydraulic transport experiment flow characteristics

Exceptional mechanical performance and macroscale superlubricity enabled by core-shell-like MoS_(2)/B_(4)C film

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第7期67卷 2018-2030页

作者： ren SiMing GAO ZhenRong FAN xin WANG Haixin WANG LiPing Key Laboratory of Advanced Marine Materials Ningbo Institute of Materials Technology and EngineeringChinese Academy of SciencesNingbo 315201China

Molybdenum disulfide(MoS_(2)) films are widely deployed in industrial applications owing to their inherent interlayer slip characteristics, offering energy consumption savings and prolonged mechanical part performance. Nevertheless, their practical utility is limited by environmental constraints and the limitations of preparation techniques, which hinder the attainment of robust superlubricity(friction coefficient rentially grow crystalline MoS_(2), providing them with outstanding mechanical properties and efficient lubrication over a wide range of temperatures. Remarkably, such film achieves robust macroscale superlubricity and an ultralow wear rate(1.7 ×10^(-8)mm^(3)N-1m^(-1)) under high contact stress in a mild vacuum environment. This noteworthy outcome is primarily attributable to the self-segmentation of the macroscale contact interface during the friction process, involving:(1) a large amount of wear debris is embedded into the wear track to create extensive micro-sized asperities;(2) a nanolayer of amorphous carbon enriched with oxide nanoparticles is formed on the uppermost part of these asperities;(3) numerous incommensurate nanocontacts comprising nanoparticles and highly oriented MoS_(2)nanosheets are established, culminating in the achievement of robust superlubricity. Our pioneering design, coupled with the elucidation of the underlying superlubricity mechanism, holds significant promise for advancing the development of robust and high-performance lubricants.

关键词： MoS_(2)/B_(4)C nanocomposites core-shell-like structure H/E ratio high-temperature friction macroscale superlubricity

Resource utilization of drinking water treatment aluminum sludge in green cementing materials: Hydration characteristics and hydration kinetics

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第10期144卷 236-248页

作者： Jing Yang cheng Chen Shuoyu Chen Yujie ren Jinsuo Lu School of Environmental and Municipal Engineering Xi’an University of Architecture and TechnologyXi’an 710055China

As a byproduct of water treatment,drinking water treatment aluminum sludge(DWTAS)has challenges related to imperfect treatment and disposal,which has caused potential harm to human health and the *** this paper,heat treatment DWTAS as a supplement cementitious material was used to prepare a green cementing *** results show that the 800℃ is considered as the optimum heat treatment temperature for ***-800℃ is fully activated after thermal decomposition to form incompletely crystallized highly activeγ-Al2O3 and active SiO_(2).The addition of DWTAS promoted the formation of ettringite and C-(A)-S-H gel,which could make up for the low early compressive strength of cementing materials to a certain *** cured for 90 days,the compressive strength of the mortar with 30% DWTAS-800℃ reached 44.86 *** dynamic process was well simulated by Krstulovi′c-Dabi′c hydration kinetics *** study provided a methodology for the fabrication of environmentally friendly and cost-effective compound cementitiousmaterials and proposed a“waste-to-resource”strategy for the sustainable management of typical solid wastes.

关键词： Drinking water treatment aluminum sludge Green cementing material Hydration characteristics Hydration kinetics