检索结果-南通市图书馆

Sustainable management of campus fallen leaves through low-temperature pyrolysis and application in Pb immobilization

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第5期139卷 281-292页

作者： Rongli Tan Ke Li Yue Sun xiaoliang Fan Zhengtao Shen Lingyi Tang School of Environment Nanjing UniversityNanjing 210023China School of Chemistry and Chemical Engineering Nanjing UniversityNanjing 210023China School of Earth and Engineering Sciences Nanjing UniversityNanjing 210023China Department of Earth and Atmospheric Sciences University of AlbertaEdmonton T6G 2E3Canada

Realizing campus sustainability requires the environmental-friendly and economical treatment of tremendous fallen leaves.Producing fallen leaf biochar at a low temperature is a candidate approach.In this study,six common types of fallen leaves on the campus were pyrolyzed at 300℃.The obtained biochars were characterized and the adsorption mechanisms of lead(Pb)by the fallen leaf biochars were investigated.The adsorption capacity of leaf biochar for Pb was relatively high,up to 209 mg/g(Yulania denudata leaf biochar).Adsorption of Pb onto active sites was the rate-limiting step for most leaf biochars.But for Platanus leaf biochar,intraparticle diffusion of Pb^(2+)dominated owing to the lowest adsorption capacity.However,the highest exchangeable Pb fraction(27%)indicated its potential for removing aqueous Pb^(2+).Ginkgo and Prunus cerasifera leaf biochar immobilized Pb by surface complexation and precipitation as lead oxalate.Hence,they were suitable for soil heavy metal remediation.This study shed the light on the sustainable utilization of campus fallen leaves and the application of fallen leaf biochars in heavy metal remediation.

关键词： Fallen leaves Waste management Biochar Lead removal Sorption Circular campus

Solvent-free carbon sphere nanofluids towards intelligent lubrication regulation

在线全文

学校读者我要写书评

暂无评论

Friction 2024年第1期12卷 95-109页

作者： Sheng ZHANG Wen LI xiaoliang MA Xiaoqiang FAN Minhao ZHU Tribology Research Institute School of Mechanical EngineeringSouthwest Jiaotong UniversityChengdu 610031China Key Laboratory of Advanced Technologies of Materials Ministry of EducationSchool of Materials Science and EngineeringSouthwest Jiaotong UniversityChengdu 610031China

By simply switching the electrical circuit installed on steel/steel contact,the tribological behaviors of nanofluids(NFs)can be regulated in real time,thereby achieving the desired performance of friction reduction and wear resistance.Herein,solvent-free carbon spherical nanofluids(C-NFs)were successfully prepared for intelligent lubrication regulation.C-NFs with excellent lubrication performance can immediately reduce the coefficient of friction(COF)despite applying a weak electric potential(1.5 V).Moreover,polyethylene glycol 400(PEG400)containing 5.0 wt%C-NFs remained responsive to electrical stimulation under the intermittent voltage application with an average coefficient of friction(ACOF)reduction of 20.8%over PEG400.Such intelligent lubrication regulation of C-NFs under an external electric field(EEF)mainly depends on the orderly arranged double-electric adsorption film of ion canopy-adsorbed carbon spheres(CSs).The intermittent electrical application can continuously reinforce the adsorption film and its durability for real-time controlling the sliding interfaces.Electrical-stimulation-responsive intelligent lubricants provide a new technical support for realizing intelligent stepless control of devices.

关键词： solvent-free carbon spherical nanofluids(C-NFs) intelligent lubrication regulation lubrication performance adsorption film

Winter Wheat Yield Estimation Based on Sparrow Search Algorithm Combined with Random Forest:A Case Study in Henan Province,China

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Geographical Science 2024年第2期34卷 342-356页

作者： SHI xiaoliang CHEN Jiajun DING Hao YANG Yuanqi ZHANG Yan College of Geomatics Xi’an University of Science and TechnologyXi’an 710054China

Precise and timely prediction of crop yields is crucial for food security and the development of agricultural policies.However,crop yield is influenced by multiple factors within complex growth environments.Previous research has paid relatively little attention to the interference of environmental factors and drought on the growth of winter wheat.Therefore,there is an urgent need for more effective methods to explore the inherent relationship between these factors and crop yield,making precise yield prediction increasingly important.This study was based on four type of indicators including meteorological,crop growth status,environmental,and drought index,from October 2003 to June 2019 in Henan Province as the basic data for predicting winter wheat yield.Using the sparrow search al-gorithm combined with random forest(SSA-RF)under different input indicators,accuracy of winter wheat yield estimation was calcu-lated.The estimation accuracy of SSA-RF was compared with partial least squares regression(PLSR),extreme gradient boosting(XG-Boost),and random forest(RF)models.Finally,the determined optimal yield estimation method was used to predict winter wheat yield in three typical years.Following are the findings:1)the SSA-RF demonstrates superior performance in estimating winter wheat yield compared to other algorithms.The best yield estimation method is achieved by four types indicators’composition with SSA-RF)(R^(2)=0.805,RRMSE=9.9%.2)Crops growth status and environmental indicators play significant roles in wheat yield estimation,accounting for 46%and 22%of the yield importance among all indicators,respectively.3)Selecting indicators from October to April of the follow-ing year yielded the highest accuracy in winter wheat yield estimation,with an R^(2)of 0.826 and an RMSE of 9.0%.Yield estimates can be completed two months before the winter wheat harvest in June.4)The predicted performance will be slightly affected by severe drought.Compared with severe drought year(2011)(R^(2)=0.680)and normal year(2017)(R^(2)=0.790

关键词： winter wheat yield estimation sparrow search algorithm combined with random forest(SSA-RF) machine learning multi-source indicator optimal lead time Henan Province,China

The use of electrokinetics promises a sustainable mining future

在线全文

学校读者我要写书评

暂无评论

The Innovation 2024年第3期5卷 17-18页

作者： Gaofeng Wang xiaoliang Liang Jianxi Zhu Hongping He CAS Key Laboratory of Mineralogy and Metallogeny/Guangdong Provincial Key Laboratory of Mineral Physics and Material Guangzhou Institute of GeochemistryChinese Academy of SciencesGuangzhou 510640China CAS Center for Excellence in Deep Earth Science Guangzhou 510640China University of the Chinese Academy of Sciences Beijing 100049China

Moving toward a zero-carbon economy is an ambitious goal of all human beings.Utilization of various metal resources plays a central role in such a transition.Rare earth elements(REEs),especially heavy REEs(HREEs),are crucial for the development of future green and zero-carbon economies due to their irreplaceable roles in many applications of renewable energy technologies;e.g.,solar panels,wind turbines,and hybrid vehicle batteries.Ion-adsorption rare earth deposits(IADs)are the primary repositories for HREEs and supply more than 95%of the global HREE demand.1 However,current mining technologies using excessive ammonium salts have caused devastating harm to the local environment while exhibiting a low recovery rate of REEs,a long mining period,and landslide risks.Since 2018,the adoption of ammonium salt-based techniques in REE mining has been prohibited,exacerbating the scarcity of REEs that could lead to disruptions of the supply chain.Moreover,metals are currently almost exclusively extracted from their ores via physical excavation or chemical leaching.These energy-intensive and environmentally damaging techniques remain among the foremost CO_(2) emitters.The mining industry is in desperate need of a new generation of mining technology.

关键词： mining replace earth

Atom substitution of the solid-state electrolyte Li_(10)GeP_(2)S_(12)for stabilized all-solid-state lithium metal batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第1期88卷 28-38,I0002页

作者： Zijing Wan Xiaozhen Chen Ziqi Zhou xiaoliang Zhong Xiaobing Luo Dongwei Xu State Key Laboratory of Coal Combustion School of Energy and Power EngineeringHuazhong University of Science and TechnologyWuhan 430074HubeiChina

Solid-state electrolyte Li_(10)GeP_(2)S_(12)(LGPS)has a high lithium ion conductivity of 12 mS cm^(-1)at room temperature,but its inferior chemical stability against lithium metal anode impedes its practical application.Among all solutions,Ge atom substitution of the solid-state electrolyte LGPS stands out as the most promising solution to this interface problem.A systematic screening framework for Ge atom substitution including ionic conductivity,thermodynamic stability,electronic and mechanical properties is utilized to solve it.For fast screening,an enhanced model Dop Net FC using chemical formulas for the dataset is adopted to predict ionic conductivity.Finally,Li_(10)SrP_(2)S_(12)(LSrPS)is screened out,which has high lithium ion conductivity(12.58 mS cm^(-1)).In addition,an enhanced migration of lithium ion across the LSr PS/Li interface is found.Meanwhile,compared to the LGPS/Li interface,LSrPS/Li interface exhibits a larger Schottky barrier(0.134 eV),smaller electron transfer region(3.103?),and enhanced ability to block additional electrons,all of which contribute to the stabilized interface.The applied theoretical atom substitution screening framework with the aid of machine learning can be extended to rapid determination of modified specific material schemes.

关键词： Atom substitution Solid-state electrolyte Machine learning Stabilized interface

Anti-inflammatory mechanism of the non-volatile ingredients performance liquid chromatography-heated electron spray ionization-high resolution mass spectroscope and cell metabolomics

在线全文

学校读者我要写书评

暂无评论

Journal of Traditional Chinese Medicine 2024年第2期44卷 260-267页

作者： JING Wenguang LIN Xiaoyu LI Chu ZHAO xiaoliang CHENG Xianlong WANG Penglong WEI Feng MA Shuangcheng Institute of Control of Chinese Traditional Medicine and Ethnic Medicine National Institutes for Food and Drug ControlBeijing 102629China School of Traditional Chinese Medicine Beijing University of Chinese MedicineBeijing 102488China Beijing Key Laboratory of Traditional Chinese Medicine Basic Research on Prevention and Treatment of Major Diseases Experimental Research CenterChina Academy of Chinese Medical SciencesBeijing 100700China

OBJECTIVE:To explore the anti-inflammatory components and mechanism of the non-volatile ingredients of patchouli.METHODS:High performance liquid chromatographyheated electron spray ionization-high resolution mass spectroscope(HPLC-HESI-HRMS)was used to analyze the chemical constituents of the non-volatile ingredients of patchouli.The anti-inflammatory activity of ingredients was evaluated using lipopolysaccharide(LPS)induced RAW264.7 cell inflammation model,and the antiinflammatory mechanism was investigated using multivariate statistical analysis of cell metabolomics.RESULTS:The non-volatile ingredients of patchouli were characterized by HPLC-HESI-HRMS,and 36 flavonoids and 18 other components were identified.These ingredients of patchouli not only had a good protective effect on the LPS-induced inflammation model of RAW264.7 cells,but also regulated the expression levels of arginine,L-leucine,cholesterol,fructose and sorbitol by down-regulating arginine metabolism,aminoacyl-tRNA biosynthesis,polyol/sorbitol pathway,so as to reduce inflammation and reduce cell damage.CONCLUSION:The non-volatile ingredients of patchouli had good anti-inflammatory effect and exerted its curative effect by regulating endogenous metabolic pathway to reduce inflammatory response.

关键词： Pogostemon non-volatile ingredients anti-inflammatory cell metabolomics

Uncovering Microstructure-Property Relationship in Ni-Alloyed Fe-Mn-Al-C Low-Density Steel Treated by Hot-Rolling and Air-Cooling Process

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第4期37卷 713-725页

作者： xiaoliang Jia Guhui Gao Xiaolu Gui Chun Feng R.D.K.Misra Bingzhe Bai School of Mechanical Electronicand Control EngineeringBeijing Jiaotong UniversityBeijing100044China CNPC Tubular Goods Research Institute Xi’an710077China Laboratory for Excellence in Advanced Steel Research University of Texas at El PasoEl PasoTX79968-0521USA School of Material Science and Engineering Key Laboratory of Advanced Materials of Ministry of EducationTsinghua UniversityBeijing100084China

This paper focuses on the relationship between the microstructure and tensile properties of Fe-Mn-Al-C low-density high-strength steel processes by hot-rolling and air-cooling process. The microstructure analysis reveals that the combination of hot-rolling and air-cooling results in the formation of heterogeneous structures comprising different-sized γ and B_(2) phases in the low-density steel with the addition of nickel (Ni). The addition of Ni promotes the formation of the B_(2) phase and induces the pinning of B_(2) phase particles at the γ grain boundaries. This pinning effect effectively hinders the growth of the γ grains, leading to grain refinement. The tensile test results demonstrate that LDS-5Ni (low-density steel, LDS) exhibits excellent high strength and ductility combination, e.g., a tensile strength of 1535 MPa, yield strength of 1482 MPa, and elongation of 23.3%. These remarkable mechanical properties are primarily attributed to the combined strengthening contributions of grain refinement and duplex nano-sized second-phase precipitation hardening.

关键词： Low-density steel Microstructure B_(2)phase κ-Carbide Tensile properties

Recent advances in transition metal phosphide materials:Synthesis and applications in supercapacitors

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Materials Science 2024年第2期6卷 174-192页

作者： Ge Li Yu Feng Yi Yang xiaoliang Wu Xiumei Song Lichao Tan College of Chemistry Chemical Engineering and Resource UtilizationNortheast Forestry University26 Hexing RoadHarbin150040PR China Institute of Carbon Neutrality Zhejiang Wanli UniversityNingbo315100PR China School of Materials Science and Chemical Engineering Harbin University of Science and TechnologyHarbin150040PR China

Supercapacitors(SCs)are considered promising energy storge systems because of their outstanding power density,fast charge and discharge rate and long-term cycling stability.The exploitation of cheap and efficient electrode materials is the key to improve the performance of supercapacitors.As the battery-type materials,transition metal phosphides(TMPs)possess high theoretical specific capacity,good electrical conductivity and superior structural stability,which have been extensively studied to be electrode materials for supercapacitors.In this review,we summarize the up-to-date progress on TMPs materials from diversified synthetic methods,diverse nanostructures and several prominent TMPs and their composites in application of supercapacitors.In the end,we also propose the remaining challenges toward the rational discovery and synthesis of high-performance TMP electrodes materials for energy storage.

关键词： Transition metal phosphides Cobalt phosphide Nickel phosphides Electrode materials Supercapacitor

Microstructure Recrystallization and Mechanical Properties of a Cold-Rolled TiNbZrTaHf Refractory High-Entropy Alloy

同方期刊数据库博看期刊评论

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第4期37卷 633-647页

作者： Chuan Rong Jieren Yang xiaoliang Zhao Ke Huang Ying Liu Xiaohong Wang Dongdong Zhu Ruirun Chen College of Materials Science and Engineering Sichuan UniversityChengdu610065China Key Laboratory of Air-Driven Equipment Technology of Zhejiang Province Quzhou UniversityQuzhou324000China School of Materials Science and Engineering Harbin Institute of TechnologyHarbin150001China

The equiatomic TiNbZrTaHf alloy was successfully rolled at room temperature with the reduction of ~ 85%. The microstructure and tensile properties were investigated after cold working and annealing. It was determined that the recrystallization temperature of the TiNbZrTaHf alloy between 850 and 900 ℃. Complete recrystallization and normal grain growth occurred, the high stability of single phase was maintained after annealing at 1000, 1200, and 1400 ℃. But the precipitated phase appeared after long term annealing, as seen after 500 h at 1000 ℃. After cold working, the tensile strength and the elongation of TiNbZrTaHf were 1137 MPa and 25.1%, respectively. The annealed alloy has a high tensile strength (σ_(b )= 863 MPa) and ductility (ε_(e )= 28.5%). Moreover, the oxidation of TiNbZrTaHf alloy at elevated temperatures has a significant impact on its mechanical properties. The poor oxidation resistance of TiNbZrTaHf can accelerate tensile failure by inducing fractures at grain boundaries.

关键词： Refractory high entropy alloy Cold rolling Recrystallization Oxidation resistance Mechanical properties