检索结果-南通市图书馆

Journal of Modern Power Systems and Clean Energy 2024年第3期12卷 695-706页

作者： Peiyuan Sun Long Huo xin Chen Siyuan Liang the School of Electrical Engineering Xi’an Jiaotong UniversityXi’an 710049China the School of Electrical Engineering and the Center of Nanomaterials for Renewable EnergyState Key Laboratory of Electrical Insulation and Power EquipmentXi’an Jiaotong UniversityXi’an 710049China the Department of Computer Science and Engineering The Chinese University of Hong KongShatin999077Hong KongChina

Rotor angle stability(RAS)prediction is critically essential for maintaining normal operation of the interconnected synchronous machines in power *** wide deployment of phasor measurement units(PMUs)promotes the development of data-driven methods for RAS *** paper proposes a temporal and topological embedding deep neural network(TTEDNN)model to accurately and efficiently predict RAS by extracting the temporal and topological features from the PMU *** grid-informed adjacency matrix incorporates the structural and electrical parameter information of the power *** the small-signal RAS with disturbance under initial operating conditions and the transient RAS with short circuits on transmission lines are *** studies of the IEEE 39-bus and IEEE 300-bus power systems are used to test the performance,scalability,and robustness against measurement uncertainties of the TTEDNN *** show that the TTEDNN model performs best among existing deep learning ***,the superior transfer learning ability from small-signal RAS conditions to transient RAS conditions has been proved.

关键词： Rotor angle stability prediction topological embedding deep learning graph convolution network

Polyoxometalates-derived ternary metal oxides electrocatalyst for N_(2) reduction under ambient conditions

在线全文

学校读者我要写书评

暂无评论

Tungsten 2024年第2期6卷 428-437页

作者： Meng-Le Yang Zhong-xin Jin Xi-Xian Cao xin-Ming Wang Hui-Yuan Ma Hai-Jun Pang Gui-xin Yang The School of Material Science and Chemical Engineering Harbin University of Science and TechnologyHarbin 150040China

Accelerating the breaking of the nitrogen nonpolar bond(N≡N)is an important factor to improve the effi ciency of the electro-catalytic nitrogen reduction reaction(e-NRR).In this work,polyoxometalates-derived FeMo-based ternary oxide materials MoO_(2)-Mo_(4)O_(11)-FeMoO_(4)@X(abbreviated as MoFeO@X,X represents the synthesis temperature of 650,750 and 850℃)were designed and synthesized for e-NRR under ambient *** scanning electron microscopy images of MoFeO@750 show an ellipsoidal-like structure(0.86×0.6μm).The relatively large specifi c surface area,formation of multiple interfaces,together with the synergistic eff ect of iron and molybdenum bimetals,would make MoFeO@X catalyst more easily absorb and activate N_(2)in the ***,the synthesized MoFeO@750 shows an optimal NH_(3)production rate of 16.57μg·h^(−1)·mg cat.^(−1)and Faradaic effi ciency of 12.33%at−0.3 V versus reversible hydrogen electrode(ν***),with outstanding electrochemical and structural stability.

关键词： Polyoxometalates Electrocatalytic nitrogen reduction reaction Ternary oxide Electrocatalyst

Effect of hot isostatic pressure on the microstructure and tensile properties of γ'-strengthened superalloy fabricated through induction-assisted directed energy deposition

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第5期31卷 1089-1097页

作者： Jianjun Xu Hanlin Ding xin Lin Feng Liu Analytical&Testing Center Northwestern Polytechnical UniversityXi’an 710072China State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China

The microstructure characteristics and strengthening mechanism of Inconel738LC(IN-738LC) alloy prepared by using induction-assisted directed energy deposition(IDED) were elucidated through the investigation of samples subjected to IDED under 1050℃ preheating with and without hot isostatic pressing(HIP,1190℃,105 MPa,and 3 h).Results show that the as-deposited sample mainly consisted of epitaxial columnar crystals and inhomogeneously distributed γ’ phases in interdendritic and dendritic core *** HIP,grain morphology changed negligibly,whereas the size of the γ’ phase became increasingly *** further heat treatment(HT,1070℃,2 h + 845℃,24 h),the γ’ phase in the as-deposited and HIPed samples presented a bimodal size distribution,whereas that in the as-deposited sample showed a size that remained *** comparison of tensile properties revealed that the tensile strength and uniform elongation of the HIP + HTed sample increased by 5% and 46%,respectively,due to the synergistic deformation of bimodal γ’phases,especially large cubic γ’ ***,the relationship between phase transformations and plastic deformations in the IDEDed sample was discussed on the basis of generalized stability theory in terms of the trade-off between thermodynamics and kinetics.

关键词： directed energy deposition Ni-based superalloys high-temperature preheating hot isostatic pressing microstructure tensile properties

Classification and spectrum optimization method of grease based on infrared spectrum

在线全文

学校读者我要写书评

暂无评论

Friction 2024年第6期12卷 1154-1164页

作者： xin FENG Yanqiu XIA Peiyuan XIE Xiaohe LI School of Energy Power and Mechanical Engineering North China Electric Power UniversityBeijing 102206China State Key Laboratory of Solid Lubrication Lanzhou Institute of Chemical PhysicsChinese Academy of SciencesLanzhou 730000China

The infrared(IR)absorption spectral data of 63 kinds of lubricating greases containing six different types of thickeners were obtained using the IR *** Kohonen neural network algorithm was used to identify the type of the lubricating *** results show that this machine learning method can effectively eliminate the interference fringes in the IR spectrum,and complete the feature selection and dimensionality reduction of the high-dimensional spectral *** 63 kinds of greases exhibit spatial clustering under certain IR spectrum recognition spectral bands,which are linked to characteristic peaks of lubricating greases and improve the recognition accuracy of these *** model achieved recognition accuracy of 100.00%,96.08%,94.87%,100.00%,and 87.50%for polyurea grease,calcium sulfonate composite grease,aluminum(Al)-based grease,bentonite grease,and lithium-based grease,*** on the different IR absorption spectrum bands produced by each kind of lubricating grease,the three-dimensional spatial distribution map of the lubricating grease drawn also verifies the accuracy of classification while recognizing the *** paper demonstrates fast recognition speed and high accuracy,proving that the Kohonen neural network algorithm has an efficient recognition ability for identifying the types of the lubricating grease.

关键词： grease infrared(IR)spectroscopy layered Kohonen network species recognition spectrum band optimization

Highly selective electrosynthesis of 3,4-dihydroisoquinoline accompanied with hydrogen production over three-dimensional hollow CoNi-based microarray electrocatalysts

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第4期17卷 2509-2519页

作者： Yu xin Liyu Chen Yingwei Li Kui Shen Guangdong Provincial Key Lab for Green Chemical Product Technology School of Chemistry and Chemical EngineeringSouth China University of TechnologyGuangzhou 510640China State Key Laboratory of Pulp and Paper Engineering School of Chemistry and Chemical EngineeringSouth China University of TechnologyGuangzhou 510640China

Electrocatalytic oxidation reaction of biomass-based derivatives is an excellent candidate to replace water oxidation for obtaining both value-added products and hydrogen(H_(2)),but the exploration of competent electrocatalysts is still highly ***,two new types of three-dimensional self-supported hollow microarrays containing CoNi layered double hydroxide(CoNi-LDH)and N-doped carbon nanosheets decorated with CoNi alloyed nanoparticles(CoNi-NC)on carbon cloth(CC)are prepared,which are further used as efficient electrocatalysts for tetrahydroisoquinoline(THIQ)electrooxidation and hydrogen evolution reaction(HER),*** demonstrate that the Co-modulated electronic environment for Ni(II)/Ni(Ⅲ)redox-looping in CoNi-LDH is the main factor to boost the selectivity of 3,4-dihydroisoquinoline(DHIQ)for the indirect electrooxidation process of *** functional theory(DFT)calculations reveal that the Ni(Ⅲ)/Co(Ⅲ)dual sites of CoNi-LDH exhibit enhanced adsorption for THIQ but poorer adsorption for DHIQ compared to pure Co(Ⅲ)or Ni(Ⅲ).Therefore,the Ni(Ⅲ)/Co(Ⅲ)dual sites can effectively inhibit the peroxidation of DHIQ to isoquinoline(IQ)over CoNi-LDH,thus improving the selectivity of DHIQ to nearly 100%,much higher than that of its pure Ni ***,CC@CoNi-NC can deliver high HER activity with low overpotential(40 mV@10 mA·cm^(-2))and high exchange current density(3.08 mA·cm^(-2)).Impressively,the assembled flow-cell device with CC@CoNi-LDH anode and CC@CoNi-NC cathode only requires low cell voltage and electricity consumption of 1.6 V and 3.50 kWh per cubic meter of H_(2)(@25 mA·cm^(-2)).

关键词： highly selective electrosynthesis dihydroisoquinolines hydrogen evolution reaction metal-organic frameworks hollow microarrays

Impact response and energy absorption of metallic buffer with entangled wire mesh damper

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第5期35卷 137-150页

作者： Chao Zheng Jun Wu Mangong Zhang xin Xue Institute of Metal Rubber&Vibration Noise School of Mechanical Engineering and AutomationFuzhou UniversityFuzhou 350116China Wuhan Second Ship Design and Research Institute Wuhan 430205China

An innovative metallic buffer consisting of series-connected hat-shaped entangled wire mesh damper(EWMD)and parallel springs are proposed in this work to enhance the reliability of engineering *** impact response and the energy dissipation mechanism of hat-shaped EWMD under different quasi-static compression deformations(2-7 mm)and impact heights(100-200 mm)are investigated using experimental and numerical *** results demonstrate distinct stages in the quasi-static mechanical characteristics of hat-shaped EWMD,including stiffness softening,negative stiffness,and stiffness *** loss factor gradually increases with increasing compression deformation before entering the stiffness hardening *** impact loads,the hat-shaped EWMD exhibits optimal impact energy absorption when it enters the negative stiffness stage(150 mm),resulting in the best impact isolation effect of metallic ***,the impact energy absorption significantly decreases when hat-shaped EWMD enters the stiffness hardening ***,quasi-static compression analysis after experiencing different impact loads reveals the disappearance of the negative stiffness ***,with increasing impact loads,the stiffness hardening point progressively shifts to an earlier stage.

关键词： Metallic buffer Hat-shaped EWMD Drop impact Energy absorption characteristics Mechanical behavior

Grain refinement of 5A06 aluminum alloy welds caused by tungsten inert gas welding arc characteristics under Ar-He alternating gas supply conditions:a coupled method of water-cooled copper plate test/numerical simulation

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第3期31卷 767-777页

作者： Hong-bin Dai Jian Miao Jia-xin Lin School of Materials Science and Engineering Harbin University of Science and TechnologyHarbin 150040HeilongjiangChina

The welding arc,as a carrier for the conversion of electrical energy to thermal energy,has a direct impact on the quality of welding by its properties and *** the tungsten inert gas(TIG)welding process under the condition of Ar-He alternating gas supply,the arc is alternately converted between Ar arc and He arc with an alternating gas supply cycle,which has obvious arc change *** FLUENT software was used to numerically simulate the characteristics of the TIG arc under the condition of alternating gas supply,and the arc temperature field,arc pressure,electric potential and current density distribution under the condition of alternating gas supply were *** with the real-time data of arc pressure measured by the water-cooled copper plate with holes,it is proved that the TIG arc has obvious dynamic characteristics under the condition of Ar-He alternating gas *** unique dynamic TIG arc acts on the 5A06 aluminum alloy weld,causing the molten pool to stir,resulting in uniform microstructure and grain refinement at the weld,and thereby improving the mechanical properties of the welded joint.

关键词： Alternating gas supply Grain refinement Numerical simulation Tungsten argon arc morphology Microstructure Mechanical property

Origin and evolution of false brinelling and fretting corrosion under rolling conditions

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Friction 2024年第4期12卷 618-631页

作者： xin JIA Lu HUANG Miao SUN Wenbin LI National Institute of Metrology Beijing 100029China Yantai Tiancheng Machinery Co. Ltd.Yantai 264006China

Rolling bearings working in oscillating applications often suffer from false brinelling and fretting corrosion that limit their service *** present,the study of oscillation-induced failures is primarily dominated by a large number of sliding and bench ***,most of the previous work are not able to fully describe the two closely related but different failure *** this study,the origin and evolution of the two failures are thoroughly investigated under strictly controlled oscillating rolling *** results show that failure evolves from false brinelling to fretting corrosion under dry friction conditions regardless of the oscillation *** process is accompanied by a large area peeling and serious oxidation,and the oxygen content increases from 2.50 wt%to 21.22 wt%.Oxidation is a crucial factor in the evolution of false brinelling into fretting ***,the distribution of microwear and oxygen content depend on the oscillation *** lubrication conditions,the friction coefficient(COF)is smaller in the initial stage and led to local slip or transient instability of rolling ***,the size of the wear marks and COF increased and appeared to be larger than those under a dry friction ***,grease can separate the contact surfaces,only surface deformation owing to false brinelling and slight damage at the roughness level *** evolution of false brinelling and fretting corrosion is also closely related to residual *** brinelling often occurrs with residual stress accomulation,meanwhile,the residual stress increases from 120 to 300 *** peeling occurs,residual stress is *** failure pattern transformed from false brinelling to fretting corrosion and is accompanied by *** far,none of investigation is able to show satisfactory evolution of oscillating-induced failures,this study may contribute to more scientific understanding of rolling bearings against long-

关键词： oscillating false brinelling fretting corrosion wear residual stress

A molecular insight into coke formation process of vacuum residue in thermal cracking reaction

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第3期21卷 2130-2138页

作者： Ji-Guang Li xin Guo Huan-Di Hou Heavy Oil Processing Department Sinopec Research Institute of Petroleum Processing Co.LtdBeijing100083China

Understanding the coking behaviors has been considered to be really essential for developing better vacuum residue processing technologies.A battery of thermal cracking tests of typical vacuum residue at 410℃ with various reaction time were performed to evaluate the coke formation *** total yields of ideal components including naphtha,atmospheric gas oil(AGO)and vacuum gas oil(VGO)of thermal cracking reactions increased from 10.89%to 40.81%,and the conversion ratios increased from8.05%to 43.33%with increasing the reaction time from 10 to 70 *** asphaltene content increased from 12.14%to a maximum of 22.39%and then decreased,and this maximum of asphaltene content occurred at the end of the coking induction *** asphaltenes during the coking induction period,at the end and after coking induction period of those tested thermal cracking reactions were characterized to disclose the structure changing rules for coke formation process,and the coke formation pathways were discussed to reveal the coke formation process at molecular level.

关键词： Vacuum residue Thermal cracking Asphaltene Coking induction period Sulfur Nitrogen

Numerical study of the influence of the atmospheric pressure on the thermal environment in the passenger cabin

在线全文

学校读者我要写书评

暂无评论

Building Simulation 2024年第2期17卷 253-265页

作者： xin Su Yu Guo Zhengwei Long Yi Cao Tianjin Key Lab.of Indoor Air Environmental Quality Control School of Environmental Science and EngineeringTianjin UniversityTianjin300072China Shanghai Aircraft Design and Research Institute Jinke RoadPudong DistrictShanghai201210China

The cabin air pressure remains lower than the horizontal atmospheric pressure when the airplane is in *** pressure is one of the parameters that must be taken into consideration while studying the thermal environment of an airplane *** are still no reference values for aircraft cabins despite the fact that numerous studies on low pressure heat transfer have demonstrated the connection between convective heat transfer coefficient(CHTC)and air *** this paper,a correction method for CHTC under low pressure conditions was established by using the dummy heat dissipation in the low-pressure cabin *** this basis,a thermal environment simulation model was developed,then was applied to the simulation of a seven-row aircraft cabin containing 42 passengers,and the CHTC and heat loss of dummy surface in the cabin were ***,the results of PMV calculated by using heat dissipation and air parameters at sampling points were *** results show that the modified CHTC can accurately reflect the cabin thermal environment under low pressure conditions,and the correction of CHTC can be realized by adjusting the turbulent Prandtl number,which is nonlinear correlated with the *** simulation results of the thermal environment in the seven-row cabin show that the CHTC changes by about 42%before and after *** air pressure decreases during take-off,which reduces the average CHTC of the crew surface from 5.09 W/(m^(2)·K)to 4.56 W/(m^(2)·K),but the air temperature rises by about 0.2°C as a *** deviation of PMV results calculated by using simulated heat loss data and using air parameters of measuring points in space is up to 0.5,but the latter is representative for calculating the thermal comfort level of the whole cabin.

关键词： low pressure aircraft cabin simulation heat dissipation convective heat transfer coefficient