检索结果-南通市图书馆

Integrated high-performance and accurate shaping technology of low-cost powder metallurgy titanium alloys: A comprehensive review

引用

International Journal of Minerals,Metallurgy and Materials 2024年第3期31卷 413-426页

作者： Xuemeng gan Shaofu li Shunyuan xiao Yafeng Yang State Key Laboratory of Mesoscience and Engineering Institute of Process EngineeringChinese Academy of SciencesBeijing 100190China University of Chinese Academy of Sciences Beijing 100049China Key Laboratory of Science and Technology on Particle Materials Chinese Academy of SciencesBeijing 100190China

The practical engineering applications of powder metallurgy (PM) Ti alloys produced through cold compaction and pressure-less sintering are impeded by poor sintering densification, embrittlement caused by excessive O impurities, and severe sintering deforma-tion resulting from the use of heterogeneous powder mixtures. This review presents a summary of our previous work on addressing the above challenges. Initially, we proposed a novel strategy using reaction-induced liquid phases to enhance sintering densification. Near- complete density (relative density exceeding 99%) was achieved by applying the above strategy and newly developed sintering aids. By focusing on the O-induced embrittlement issue, we determined the onset dissolution temperature of oxide films in the Ti matrix. On the basis of this finding, we established a design criterion for effective O scavengers that require reaction with oxide films before their dissol-ution. Consequently, a ductile PM Ti alloy was successfully obtained by introducing 0.3wt% NdB6 as the O scavenger. Lastly, a powder- coating strategy was adopted to address the sintering deformation issue. The ultrafine size and shell-like distribution characteristics of coating particles ensured rapid dissolution and homogeneity in the Ti matrix, thereby facilitating linear shrinkage during sintering. As a result, geometrically complex Ti alloy parts with high dimensional accuracy were fabricated by using the coated powder. Our fundament-al findings and related technical achievements enabled the development of an integrated production technology for the high-performance and accurate shaping of low-cost PM Ti alloys. Additionally, the primary engineering applications and progress in the industrialization practice of our developed technology are introduced in this review.

关键词： powder metallurgy titanium sintering densification oxygen scavenging accurate shaping

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Challenges in li-ion battery high-voltage technology and recent advances in high-voltage electrolytes

引用

Journal of Energy Chemistry 2024年第4期91卷 73-98页

作者： Jianguo liu Baohui li Jinghang Cao xiao Xing gan Cui Shandong Key Laboratory of Oil&Gas Storage and Transportation Safety College of Pipeline and Civil EngineeringChina University of Petroleum(East China)Qingdao 266580ShandongChina

The electrolyte directly contacts the essential parts of a lithium-ion battery,and as a result,the electrochemical properties of the electrolyte have a significant impact on the voltage platform,charge discharge capacity,energy density,service life,and rate discharge *** raising the voltage at the charge/discharge plateau,the energy density of the battery is ***,this causes transition metal dissolution,irreversible phase changes of the cathode active material,and parasitic electrolyte oxidation *** article presents an overview of these concerns to provide a clear explanation of the issues involved in the development of electrolytes for high-voltage lithium-ion ***,solidstate electrolytes enable various applications and will likely have an impact on the development of batteries with high energy *** is necessary to improve the high-voltage performance of electrolytes by creating solvents with high thermal stabilities and high voltage resistance and additives with superior film forming performance,multifunctional capabilities,and stable lithium *** offer suggestions for the future development of high-energy lithium-ion batteries,we conclude by offering our own opinions and insights on the current development of lithium-ion batteries.

关键词： lithium-ion battery High voltage Electrolyte additive Solid electrolyte

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Lotus root-like RuIr alloys with close-packed(0001)branches:Strain-driven performance for acidic water oxidation

引用

Journal of Energy Chemistry 2024年第5期92卷 579-590页

作者： Mingyue xiao Wanli Xu Rongchao li Yanhui Sun Jingjun liu Feng liu Jun gan Shixin Gao Beijing Key Laboratory of Electrochemical Process and Technology for Materials Beijing University of Chemical TechnologyBeijing 100029China Yunnan Precious Metals Lab Kunming 650100YunnanChina

Achieving composition tunability and structure editability of nanoalloys with high level strain may be an efficient strategy to remarkably boost catalytic performance toward oxygen evolution reaction(OER)in acidic water ***,lotus root-like RuIr alloys with native micro-strain were constructed by an epitaxial growth of Ru-richened hcp-(0001)branches on Ir-richened fcc-(111)seeds using a polyol thermal synthesis *** resultant Ru_(60)Ir_(40) alloy shows an OER overpotential of 197 mV at 10 mA cm^(-2) and a Tafel slope of 46.59 mV dec^(-1),showing no obvious activity decay for 80 h continuous chronopotentiometry test in 0.5 M H_(2)SO_(4).The related characterizations including X-ray absorption fine structure(XAFS)spectroscopy and density functional theory(DFT)calculations show that that the remarkably improved activity of the lotus root-like alloy can be attributed to the(0001)facet-triggered strain,which can efficiently optimize the electronic band structure of the active metal and the weakening of the chemisorption of oxygen-containing substances to boost OER ***,this work provides a new strategy to designing a class of advanced electrocatalysts with high strain using diverse nanostructures as building materials for carbon-free clean energy conversion systems.

关键词： Rulr alloy Lotusroot-like structure Strain Oxygene volution reaction Activity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Experimental and Numerical Investigations of Shock-Wave Boundary Layer Interactions in a Highly Loaded Transonic Compressor Cascade

引用

Journal of Thermal Science 2024年第1期33卷 158-171页

作者： MENG Fanjie li Kunhang GUO Penghua gan Jiuliang li Jingyin School of Energy and Power Engineering Xi'an Jiaotong UniversityXi'an 710049China Institute of Engineering Thermophysics Chinese Academy of SciencesBeijing 100190China

Experimental and numerical investigations were conducted to investigate the variations of shock-wave boundary layer interaction(SBli) phenomena in a highly loaded transonic compressor cascade with Mach *** schlieren technique was used to observe the shock structure in the cascade and the pressure tap method to measure the pressure distribution on the blade *** unsteady pressure distribution on blade surface was measured with the fast-response pressure-sensitive paint(PSP) technique to obtain the unsteady pressure distribution on the whole blade surface and to capture the shock oscillation characteristics caused by *** addition,the Reynolds Averaged Navier Stokes simulations were used to compute the three-dimensional steady flow field in the transonic *** was found that the shock wave patterns and behaviors are affected evidently with the increase in incoming Mach number at the design flow angle,especially with the presence of the separation bubble caused by *** time-averaged pressure distribution on the blade surface measured by PSP technique showed a symmetric pressure filed at Mach numbers of 0.85,while the pressure field on the blade surface was an asymmetric one at Mach numbers of 0.90 and *** oscillation of the shock wave was closely with the flow separation bubble on the blade surface and could transverse over nearly one interval of the pressure *** oscillation of the shock wave may smear the pressure jump phenomenon measured by the pressure taps.

关键词： transonic flow transonic compressor cascade shock-wave boundary-layer interaction shock oscillation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

An angular blinking jamming method based on electronically controlled corner reflectors

引用

Journal of Systems Engineering and Electronics 2024年第2期35卷 330-338页

作者： gan.lin WU Zehao WANG Xuesong li Jianbing State Key Laboratory of Complex Electromagnetic Environmental Effects on Electronics and Information System National University of Defense TechnologyChangsha 410073China

Passive jamming is believed to have very good potential in countermeasure *** this paper,a passive angular blinking jamming method based on electronically controlled corner reflectors is *** amplitude of the incident wave can be modulated by switching the corner reflector between the penetration state and the reflection state,and the ensemble of multiple corner reflectors with towing rope can result in complex angle decoying *** of the decoying effect on corner reflectors’radar cross section and positions are analyzed and *** show that the angle measured by a monopulse radar can be significantly interfered by this method while the automatic tracking is employed.

关键词： monopulse radar angular blinking jamming corner reflector amplitude-comparison angle measurement metasurface

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Stability and performance analysis of the compressed Kalman filter algorithm for sparse stochastic systems

引用

Science China(Technological Sciences) 2024年第2期67卷 380-394页

作者： li RongJiang gan Die XIE SiYu LüJinHu Key Laboratory of Systems and Control Academy of Mathematics and Systems ScienceChinese Academy of SciencesBeijing 100190China School of Mathematical Sciences University of Chinese Academy of SciencesBeijing 100049China Zhongguancun Laboratory Beijing 100049China School of Aeronautics and Astronautics University of Electronic Science and Technology of ChinaChengdu 611731China School of Automation Science and Electrical Engineering Beihang UniversityBeijing 100191China

This paper considers the problem of estimating unknown sparse time-varying signals for stochastic dynamic *** deal with the challenges of extensive sparsity,we resort to the compressed sensing method and propose a compressed Kalman filter(KF)*** algorithm first compresses the original high-dimensional sparse regression vector via the sensing matrix and then obtains a KF estimate in the compressed low-dimensional ***,the original high-dimensional sparse signals can be well recovered by a reconstruction *** ensure stability and establish upper bounds on the estimation errors,we introduce a compressed excitation condition without imposing independence or stationarity on the system signal,and therefore suitable for feedback *** further present the performance of the compressed KF ***,we show that the mean square compressed tracking error matrix can be approximately calculated by a linear deterministic difference matrix equation,which can be readily evaluated,analyzed,and ***,a numerical example demonstrates that our algorithm outperforms the standard uncompressed KF algorithm and other compressed algorithms for estimating high-dimensional sparse signals.

关键词： sparse signal compressed sensing Kalman filter algorithm compressed excitation condition stochastic stability tracking performance

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A seismic elastic moduli module for the measurements of low-frequency wave dispersion and attenuation of fluid-saturated rocks under different pressures

引用

Petroleum Science 2024年第1期21卷 162-181页

作者： Yan-xiao He Shang-Xu Wang Gen-Yang Tang Chao Sun Hong-Bing li San-Yi Yuan Xian Wei li-Deng gan xiao-Feng Dai Qiang Ge Peng-Peng Wei Hui-Qing Zhang National Key Laboratory of Petroleum Resources and Engineering CNPC Key Lab of Geophysical ExplorationCollege of GeophysicsChina University of Petroleum(Beijing)Beijing102249China School of Resources and Geosciences China University of Mining and TechnologyXuzhou221116JiangsuChina Research Institute of Petroleum Exploration and Development CNPCBeijing100083China Beijing Vocational College of Labour and Social Security Beijing100029China PetroChina Dagang Oilfield Exploration and Development Research Institute CNPCTianjin300280China

Knowledge about the seismic elastic modulus dispersion,and associated attenuation,in fluid-saturated rocks is essential for better interpretation of seismic observations taken as part of hydrocarbon identification and time-lapse seismic surveillance of both conventional and unconventional reservoir and overburden performances.A Seismic Elastic Moduli Module has been developed,based on the forced-oscillations method,to experimentally investigate the frequency dependence of Young's modulus and Poisson's ratio,as well as the inferred attenuation,of cylindrical samples under different confining pressure *** with three standard samples showed that the measured elastic moduli were consistent with the published data,indicating that the new apparatus can operate reliably over a wide frequency range of f∈[1-2000,10^(6)]*** Young's modulus and Poisson's ratio of the shale and the tight sandstone samples were measured under axial stress oscillations to assess the frequency-and pressure-dependent *** dry condition,both samples appear to be nearly frequency independent,with weak pressure dependence for the shale and significant pressure dependence for the *** particular,it was found that the tight sandstone with complex pore microstructure exhibited apparent dispersion and attenuation under brine or glycerin saturation conditions,the levels of which were strongly influenced by the increased effective *** addition,the measured Young's moduli results were compared with the theoretical predictions from a scaled poroelastic model with a reasonably good agreement,revealing that the combined fluid flow mechanisms at both mesoscopic and microscopic scales possibly responsible for the measured dispersion.

关键词： Low-frequency measurements Dispersion and attenuation Rock physics Fluid flow

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Influence of oxygen-rich hot air composite gas medium on sintering performance and function mechanism

引用

Journal of Iron and Steel Research International 2024年第5期31卷 1071-1081页

作者： Min gan Hao-xiang Zheng xiao-hui Fan Zhi-yun Ji Qiang li Ming Wu Yi-fan Wang xiao-long Wang Yu-feng Wu Xu-ling Chen Zeng-qing Sun xiao-xian Huang School of Minerals Processing and Bioengineering Central South UniversityChangsha410083HunanChina Shanxi Taigang Stainless Steel Co. Ltd.Taiyuan030003ShanxiChina

Hot air sintering technology is used to improve the quality and production efficiency of sintered ***,the current thick layer condition highlights the disadvantage of the low oxygen potential of the hot air sintering ***,it is considered to use oxygen enrichment sintering to improve the environment of hot air *** sintering,hot air sintering,and oxygen-rich hot air sintering were compared through sintering cup experiments,and the influence of hot air and oxygen-rich hot air on sintering indexes was *** air reduced the vertical sintering velocity,while improved the yield and tumbler ***-rich hot air sintering contributed to improving the vertical sintering velocity while ensuring the quality of sintered ore,thus comprehensively improving production *** the action of hot air,the highest temperature of the sintering layer increased and the high-temperature holding time was *** oxygen enrichment,the combustion efficiency of fuels in the upper layer of materials was promoted,which optimized heat distribution in the middle and lower layers of materials and increased the content of calcium ferrite in the sintered ore,thus strengthening the sintering process.

关键词： Iron ore sintering Hot air sintering Oxygen enrichment Function mechanism

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Thickness dependence of superconductivity in layered GeP_(5)

引用

Rare Metals 2024年第3期43卷 1323-1328页

作者： lin Wu Ke-Meng Yang Wei gan Rui-Chun xiao Ya-Jie Dai Xi Tang Hong lin Hui Han Hui li Information Materials and Intelligent Sensing Laboratory of Anhui Province Institute of Physical Science and Information TechnologyAnhui UniversityHefei230601China

Understanding the relationship between dimensionality and superconductivity has attracted substantial research *** this work,we report the effective modulation of superconductivity in GeP_(5)through *** superconducting phase transition temperature improves by~10%as the thickness of GeP_(5)decreases from bulk to~96 nm,behaving as a unique negative relationship between the superconducting phase transition temperatureand thickness.

关键词： superconductivity dimensionality

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Subarachnoid hemorrhage misdiagnosed as acute coronary syndrome leading to catastrophic neurologic injury: A case report

引用

World Journal of Clinical Cases 2024年第1期12卷 148-156页

作者： Jun-Ming lin xiao-Jun Yuan Guang li Xin-Rong gan Wen-Hua Xu Department of Orthopaedic Surgery People's Hospital of Yichun CityYichun 336000Jiangxi ProvinceChina

BACKGROUND Elevated levels of cardiac troponin and abnormal electrocardiogram changes are the primary basis for clinical diagnosis of acute coronary syndrome(ACS).Troponin levels in ACS patients can often be more than 50 times the upper reference *** patients with subarachnoid hemorrhage(SAH)also show electrocardiogram abnormalities,myocardial damage,and elevated cardiac *** ACS patients,patients with SAH only have a slight increase in troponin,and the use of anticoagulants or antiplatelet drugs is *** of the opposite treatment modalities,it is essential for clinicians to distinguish between SAH and *** SUMMARY A 56-year-old female patient was admitted to the emergency department at night with a sudden onset of severe back *** final diagnosis was intraspinal hematoma in the thoracic *** performed an emergency thoracic spinal canal hematoma evacuation procedure with the assistance of a ***,diffuse hematoma formation was found in the T7-T10 spinal canal,and no obvious spinal vascular malformation changes were *** head and spinal magnetic resonance imaging(MRI)showed a small amount of SAH in the skull,no obvious abnormalities in the cervical and thoracic spinal canals,and no abnormal signals in the lumbar spinal ***-dominal aorta computed tomography angiography showed no vascular *** motor system examination showed Medical Research Council Scale grade 1/5 strength in both lower extremities,and the patient experienced decreased sensation below the T12 rib margin and reported a Visual Analog Scale score of *** Extremely elevated troponin levels(more than 50 times the normal range)are not unique to coronary artery *** can also result in extremely high troponin levels,and antiplatelet drugs are contraindicated in such *** MRI can help in the early differential diagnosis,as a misdiagnosis of ACS can lead to catastroph

关键词： Acute coronary syndrome Spontaneous spinal subdural hematoma Misdiagnosis Catastrophic neurological injury Case report

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：