检索结果-南通市图书馆

Microstructure evolution and strengthening mechanism of high -performance powder metallurgy TA15 titanium alloy by hot rolling

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1426-1436页

作者： Ying Gao Ce Zhang Jiazhen Zhang Xin lu Beijing Advanced Innovation Center for Materials Genome Engineering State Key Laboratory for Advanced Metals and MaterialsInstitute for Advanced Ma-terials and TechnologyUniversity of Science and Technology BeijingBeijing 100083China National Engineering Research Center for Advanced Rolling Technology National Engineering Research Center for Flat Rolling EquipmentInstitute of Engin-eering TechnologyUniversity of Science and Technology BeijingBeijing 100083China

Hot deformation of sintered billets by powder metallurgy(PM)is an effective preparation technique for titanium alloys,which is more significant for high-alloying *** this study,Ti–6.5Al–2Zr–Mo–V(TA15)titanium alloy plates were prepared by cold press-ing sintering combined with high-temperature hot *** microstructure and mechanical properties under different process paramet-ers were *** microscope,electron backscatter diffraction,and others were applied to characterize the microstructure evolution and mechanical properties strengthening *** results showed that the chemical compositions were uniformly dif-fused without segregation during sintering,and the closing of the matrix craters was accelerated by increasing the sintering *** block was hot rolled at 1200℃ with an 80%reduction under only two passes without *** strength and elongation of the plate at 20–25℃ after solution and aging were 1247 MPa and 14.0%,respectively,which were increased by 24.5%and 40.0%,respect-ively,compared with the as-sintered alloy at 1300℃.The microstructure was significantly refined by continuous dynamic recrystalliza-tion,which was completed by the rotation and dislocation absorption of the substructure surrounded by low-angle grain *** hot rolling combined with heat treatment,the strength and plasticity of PM-TA15 were significantly improved,which resulted from the dense,uniform,and fine recrystallization structure and the synergistic effect of multiple slip systems.

关键词： elemental powder powder metallurgy titanium alloy hot rolling strength and plasticity

Experimental distillation of tripartite quantum steering with an optimal local filtering operation

在线全文

学校读者我要写书评

暂无评论

Photonics Research 2024年第3期12卷 552-562页

作者： QIAN-XI ZHANG XIAO-XU FANG HE lu School of Physics State Key Laboratory of Crystal MaterialsShandong UniversityJinan 250100China Shenzhen Research Institute of Shandong University Shenzhen 518057China

Multipartite Einstein-Podolsky-Rosen(EPR)steering admits multipartite entanglement in the presence of uncharacterized verifiers,enabling practical applications in semi-device-independent *** applications generally require stronger steerability,while the unavoidable noise weakens steerability and consequently degrades the performance of quantum information ***,we propose the local filtering operation that can maximally distill genuine tripartite EPR steering from N copies of three-qubit generalized Greenberger-Horne-Zeilinger states,in the context of two semi-device-independent *** optimal filtering operation is determined by the maximization of assemblage *** and numerical results indicate the advantage of the proposed filtering operation when N is finite and the steerability of initial assemblages is ***,a proof-of-principle demonstration of two-copy distillation is realized with the optical *** advantage of the optimal local filtering operation is confirmed by the distilled assemblage in terms of higher assemblage fidelity with perfectly genuine tripartite steerable assemblages,as well as the greater violation of the inequality to witness genuine tripartite steerable *** results benefit the distillation of multipartite EPR steering in practice,where the number of copies of initial assemblages is generally finite.

关键词： filtering distillation optimal

MCIF-Transformer Mask RCNN:Multi-Branch Cross-Scale Interactive Feature Fusion Transformer Model for PET/CT lung Tumor Instance Segmentation

在线全文

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第6期79卷 4371-4393页

作者： Huiling lu Tao Zhou School of Medical Information&Engineering Ningxia Medical UniversityYinchuan750004China School of Computer Science and Engineering North Minzu UniversityYinchuan750021China Key Laboratory of Image and Graphics Intelligent Processing of State Ethnic Affairs Commission NorthMinzu UniversityYinchuan750021China

The precise detection and segmentation of tumor lesions are very important for lung cancer computer-aided ***,in PET/CT(Positron Emission Tomography/Computed Tomography)lung images,the lesion shapes are complex,the edges are blurred,and the sample numbers are *** solve these problems,this paper proposes a Multi-branch Cross-scale Interactive Feature fusion Transformer model(MCIF-Transformer Mask RCNN)for PET/CT lung tumor instance segmentation,The main innovative works of this paper are as follows:Firstly,the ResNet-Transformer backbone network is used to extract global feature and local feature in lung *** pixel dependence relationship is established in local and non-local fields to improve the model perception ***,the Cross-scale Interactive Feature Enhancement auxiliary network is designed to provide the shallow features to the deep features,and the cross-scale interactive feature enhancement module(CIFEM)is used to enhance the attention ability of the fine-grained ***,the Cross-scale Interactive Feature fusion FPN network(CIF-FPN)is constructed to realize bidirectional interactive fusion between deep features and shallow features,and the low-level features are enhanced in deep semantic ***,4 ablation experiments,3 comparison experiments of detection,3 comparison experiments of segmentation and 6 comparison experiments with two-stage and single-stage instance segmentation networks are done on PET/CT lung medical image *** results showed that APdet,APseg,ARdet and ARseg indexes are improved by 5.5%,5.15%,3.11%and 6.79%compared with Mask RCNN(resnet50).Based on the above research,the precise detection and segmentation of the lesion region are realized in this *** method has positive significance for the detection of lung tumors.

关键词： PET/CT images instance segmentation mask RCNN interactive fusion transformer

Decentralized Optimal Control and Stabilization of Interconnected Systems With Asymmetric Information

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

IEEE/CAA Journal of Automatica Sinica 2024年第3期11卷 698-707页

作者： Na Wang Xiao Liang Hongdan Li Xiao lu the College of Electrical Engineering and Automation Shandong University of Science and TechnologyQingdao 266000China the School of Automation and Electrical Engineering Linyi UniversityLinyi 276000China the College of Energy Storage Technology Shandong University of Science and TechnologyQingdao 266000China

The paper addresses the decentralized optimal control and stabilization problems for interconnected systems subject to asymmetric *** with previous work,a closed-loop optimal solution to the control problem and sufficient and necessary conditions for the stabilization problem of the interconnected systems are given for the first *** main challenge lies in three aspects:Firstly,the asymmetric information results in coupling between control and estimation and failure of the separation ***,two extra unknown variables are generated by asymmetric information(different information filtration)when solving forward-backward stochastic difference ***,the existence of additive noise makes the study of mean-square boundedness an *** adopted technique is proving and assuming the linear form of controllers and establishing the equivalence between the two systems with and without additive noise.A dual-motor parallel drive system is presented to demonstrate the validity of the proposed algorithm.

关键词： Asymmetric information decentralized control forwardbackward stochastic difference equations interconnected system stalibization

Study on the mechanism and reaction characteristics of metal-supported phosphogypsum as oxygen carrier in a chemical looping gasification application

在线全文

学校读者我要写书评

暂无评论

Journal of Environmental Sciences 2024年第4期138卷 428-438页

作者： Jing Yang Yujie Ren Shuoyu Chen Jinsuo lu School of Environmental and Municipal Engineering Xi’an University of Architecture and TechnologyXi’an 710055China

This study aimed to explore the chemical looping gasification(CLG)reaction characteristics of the metal-supported composite phosphogypsum(PG)oxygen carriers(OCs)and the thermodynamic *** FactSage 7.1 thermodynamic simulation was used to explore the oxygen release and H_(2)S removal *** experimental results showed that the syngas yield of CLG with PG-CuFe_(2)O_(4)was more than that with PG-Fe_(2)O_(3)20/CuO40 or PG-Fe_(2)O_(3)30/CuO30 OC at 1023 K when the water vapor content was ***,the maximum syngas yield of the CO selectivity was 70.3% and of the CO_(2)selectivity was 23.8%.The H_(2)/CO value was 0.78,and the highest carbon conversion efficiency was 91.9% in PG-CuFe_(2)O_(4)at the gasification temperature of 1073 *** metal-supported PG composite oxygen carrier was proved not only as an oxygen carrier to participate in the preparation of syngas but also as a catalyst to catalyze coal gasification ***,both the experimental results and FactSage 7.1 thermodynamic analysis revealed that the trapping mechanism of H_(2)S by composite OCs was as follows:CuO first lost lattice oxygen as an oxygen carrier to generate Cu_(2)O,which,in turn,reacted with H_(2)S to generate Cu_(2)*** study provided efficient guidance and reference for OC design in CLG.

关键词： Metal-supported composite phosphogypsum Reaction characteristics Thermodynamic mechanism Chemical looping gasification

Fullerenes and derivatives as electrocatalysts: Promises and challenges

在线全文

学校读者我要写书评

暂无评论

Green Energy & Environment 2024年第1期9卷 7-27页

作者： Kun Guo Ning Li Lipiao Bao Xing lu State Key Laboratory of Materials Processing and Die&Mould Technology School of Materials Science and EngineeringHuazhong University of Science and TechnologyWuhan430074China

Carbon-based metal-free nanomaterials are promising alternatives to precious metals as electrocatalysts of key energy storage and conversion *** paramount signiﬁcance are the establishment of design principles by understanding the catalytic mechanisms and identifying the active *** from sp2-conjugated graphene and carbon nanotube,fullerene possesses unique characteristics that are growingly being discovered and exploited by the electrocatalysis *** instance,the well-deﬁned atomic and molecular structures,the good electron afﬁnity to tune the electronic structures of other substances,the intermolecular self-assembly into superlattices,and the on-demand chemical modiﬁcation have endowed fullerene with incomparable advantages as electrocatalysts that are otherwise not applicable to other carbon *** increasing studies are being reported on this intriguing topic,it is necessary to provide a state-of-the-art overview of the recent *** review takes such an initiative by summarizing the promises and challenges in the electrocatalytic applications of fullerene and its *** content is structured according to the composition and structure of fullerene,including intact fullerene(e.g.,fullerene composite and superlattices)and fullerene derivatives(e.g.,doped,endohedral,and disintegrated fullerene).The synthesis,characterization,catalytic mechanisms,and deﬁciencies of these fullerene-based materials are explicitly *** conclude it by sharing our perspectives on the key aspects that future efforts shall consider.

关键词： Fullerene Fullerene derivative Metal-free catalyst Structural defect Electrocatalyst

Fluid-structure interaction simulation for multi-body flexible morphing structures

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第2期37卷 137-147页

作者： Wenzhi GUO Yongtao SHUI lu NIE Gang CHEN State Key Laboratory of Strength and Vibration for Mechanic Structures School of Aerospace EngineeringXi’an Jiaotong UniversityXi’an 710049China China Academy of Launch Vehicle Technology Beijing 100076China China Academy of Aerospace Science and Innovation Beijing 100086China Shannxi Key Laboratory of Service Environment and Control for Flight Vehicles Xi’an Jiaotong UniversityXi’an 710049China

The multi-body flexible morphing airfoil can improve the aerodynamic characteristics based on different flight missions *** researches have focused on the unsteady aerodynamic characteristics of flexible wings under passive ***,the unsteady aerodynamic characteristics with the fluid-structure interaction effects in the multi-body active actuation process of morphing airfoil deserve further *** this paper,a fluid-structure coupled simulation method for multi-body flexible morphing airfoil with active actuation subsystem was investigated,and the aerodynamic characteristics during deformation were compared with different skin flexibility,flow field environment,actuation mode and actuation *** numerical results show that for the steady aerodynamic,the skin flexibility can improve the stability *** the unsteady process,the change trend of the transient lift coefficient and pitching moment are consistent with those of the active drive characteristics,while the instantaneous lift-drag ratio coefficient is greatly affected by the driving mode and can be improved by increasing the driving duration.

关键词： Fluid-structure interaction Multi-body dynamics modeling Flexible structures Aerodynamics Morphing wings

Origin and evolution of false brinelling and fretting corrosion under rolling conditions

在线全文

学校读者我要写书评

暂无评论

Friction 2024年第4期12卷 618-631页

作者： Xin JIA lu HUANG Miao SUN Wenbin LI National Institute of Metrology Beijing 100029China Yantai Tiancheng Machinery Co. Ltd.Yantai 264006China

Rolling bearings working in oscillating applications often suffer from false brinelling and fretting corrosion that limit their service *** present,the study of oscillation-induced failures is primarily dominated by a large number of sliding and bench ***,most of the previous work are not able to fully describe the two closely related but different failure *** this study,the origin and evolution of the two failures are thoroughly investigated under strictly controlled oscillating rolling *** results show that failure evolves from false brinelling to fretting corrosion under dry friction conditions regardless of the oscillation *** process is accompanied by a large area peeling and serious oxidation,and the oxygen content increases from 2.50 wt%to 21.22 wt%.Oxidation is a crucial factor in the evolution of false brinelling into fretting ***,the distribution of microwear and oxygen content depend on the oscillation *** lubrication conditions,the friction coefficient(COF)is smaller in the initial stage and led to local slip or transient instability of rolling ***,the size of the wear marks and COF increased and appeared to be larger than those under a dry friction ***,grease can separate the contact surfaces,only surface deformation owing to false brinelling and slight damage at the roughness level *** evolution of false brinelling and fretting corrosion is also closely related to residual *** brinelling often occurrs with residual stress accomulation,meanwhile,the residual stress increases from 120 to 300 *** peeling occurs,residual stress is *** failure pattern transformed from false brinelling to fretting corrosion and is accompanied by *** far,none of investigation is able to show satisfactory evolution of oscillating-induced failures,this study may contribute to more scientific understanding of rolling bearings against long-

关键词： oscillating false brinelling fretting corrosion wear residual stress

Effect of Sintering Temperature on the Microstructure and Mechanical Properties of Nanocrystalline Cemented Carbide

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Wuhan University of Technology(Materials Science) 2024年第3期39卷 664-672页

作者：陈先富刘颖 YE Jinwen WANG lu School of Materials Science and Engineering Sichuan UniversityChengdu 610065China Key Laboratory of Advanced Special Ma-terial&Technology Ministry of EducationChengdu 610065China

WC-Co nanocrystalline nitrogen-containing cemented carbides were prepared by vacuum sintering and low pressure *** sintering processes of Cr_(2)(C,N)doped nano WC-Co powders were studied by using thermogravimetric analysis(TGA)and differential scanning calorimetry(DSC).The effect of sintering temperature on the microstructure and mechanical properties of nanocrystalline cemented carbide was studied by scanning electron microscope(SEM),high resolution transmission electron microscope(HRTEM)and mechanical property *** results showed that the nano WC grains began to grow in the solid phase sintering stage.A high-performance nano-nitrogen-containing cemented carbide with uniform microstructure and good interfacial bonding can be obtained by increasing the sintering temperature to 1380℃.It has a transverse rupture strength(TRS)of 5057 MPa and a hardness of 1956 HV30.

关键词： nano nitrogen cemented carbide sintering temperature microstructure mechanical properties