检索结果-南通市图书馆

在线全文

学校读者我要写书评

暂无评论

铊短期暴露对SBR活性污泥性能的影响

中国环境科学 2024年第7期44卷 3780-3785页

作者：赵晓静罗远玲吴红辉丁雨葶向珂逸黄骏国高嘉妮贾美莹胡新将朱健王平徐海音中南林业科技大学环境科学与工程学院湖南长沙410004 长沙环境保护职业技术学院湖南长沙410018 湖南大学湖南长沙410082

以序批式活性污泥(SBR)工艺为例,从脱氮除磷性能、微生物及酶活性等方面研究了Tl暴露浓度对活性污泥性能的短期扰动及其恢复行为.结果表明:活性污泥的脱氮除磷性能和COD去除均易受Tl的影响.当Tl为500µg/L时,脱氮除磷被抑制,但Tl暴露消... 详细信息

以序批式活性污泥(SBR)工艺为例,从脱氮除磷性能、微生物及酶活性等方面研究了Tl暴露浓度对活性污泥性能的短期扰动及其恢复行为.结果表明:活性污泥的脱氮除磷性能和COD去除均易受Tl的影响.当Tl为500µg/L时,脱氮除磷被抑制,但Tl暴露消除后,性能可恢复.而当Tl为1000µg/L时,尽管除磷效率可恢复至65%,但脱氮过程完全被抑制且不可逆.低浓度Tl提高了COD去除率且高浓度Tl对COD去除的影响是可逆的.此外,200µg/L的Tl提高了微生物活性,但1000µg/L的Tl会导致过氧化氢酶和超氧化物歧化酶相对产量分别降低至71.9%和30.8%,极大抑制了微生物活性;比耗氧速率对Tl的存在与消失均很敏感,可作为污水处理厂Tl暴露的指示指标.傅里叶红外光谱和X射线光电子能谱表征结果表明,Tl与游离态胞外聚合物的羟基结合或由Tl^(+)氧化成Tl^(3+),可能是活性污泥降低Tl对其细胞毒性的作用机制.因此Tl短期暴露时,需增强活性污泥的脱氮除磷性能并强化其除Tl能力,以确保污水处理厂稳定运行.本研究揭示了Tl短期暴露对活性污泥系统的潜在影响并提出了应对措施.

关键词：铊 SBR 脱氮除磷酶活性

Preface for the Special Issue on“Safety and Intelligent Maintenance of Offshore Structures”

在线全文

学校读者我要写书评

暂无评论

China Ocean Engineering 2024年第2期38卷 181-182页

作者： xu Wan-hai State Key Laboratory of Hydraulic Engineering Intelligent Construction and Operation Tianjin UniversityTianjin 300072China

The ocean serves as a vital carrier for human resource development and economic growth and contains rich mineral resources such as oil,natural gas,polymetallic nodules,cobalt-rich ferromanganese crusts,polymetallic sulfides,and rare earth ***,the ocean has wealthy reserves of wind,wave,tidal,and solar energy,making it an essential strategic space for sustainable future ***,offshore structures are complex.

关键词： ocean offshore tidal

A Review on Vibration Control of Multiple Cylinders Subjected to FlowInduced Vibrations

在线全文

学校读者我要写书评

暂无评论

China Ocean Engineering 2024年第2期38卷 183-197页

作者： xu Wan-hai MA Ye-xuan State Key Laboratory of Hydraulic Engineering Intelligent Construction and Operation Tianjin UniversityTianjin 300350China Institute of Mechanics Chinese Academy of SciencesBeijing 100190China

The fatigue damage caused by flow-induced vibration(FIV)is one of the major concerns for multiple cylindrical structures in many engineering *** FIV suppression is of great importance for the security of many cylindrical *** active and passive control methods have been employed for the vibration suppression of an isolated cylinder undergoing vortex-induced vibrations(VIV).The FIV suppression methods are mainly extended to the multiple cylinders from the vibration control of the isolated *** to the mutual interference between the multiple cylinders,the FIV mechanism is more complex than the VIV mechanism,which makes a great challenge for the FIV *** efforts have been devoted to vibration suppression of multiple cylinder systems undergoing FIV over the past two *** control methods,such as helical strakes,splitter plates,control rods and flexible sheets,are not always effective,depending on many influence factors,such as the spacing ratio,the arrangement geometrical shape,the flow velocity and the parameters of the vibration control *** FIV response,hydrodynamic features and wake patterns of the multiple cylinders equipped with vibration control devices are reviewed and *** FIV suppression efficiency of the vibration control methods are analyzed and compared considering different influence *** research on the FIV suppression of multiple cylinders is suggested to provide insight for the development of FIV control methods and promote engineering applications of FIV control methods.

关键词： flow-induced vibration vibration control multiple cylinders tandem side-by-side staggered

A low-melting-point metal doping strategy for the synthesis of small-sized intermetallic Pt_(5)Ce fuel cell catalysts

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第9期17卷 8112-8118页

作者： Zi-Jun Zou Shi-Yi yin Yao Tang Sheng-Liang Zhong Lei Wang Shi-Long xu hai-Wei Liang College of Chemistry and Chemical Engineering Jiangxi Normal UniversityNanchang 330022China Department of Chemistry University of Science and Technology of ChinaHefei 230026China School of Materials and Chemical Engineering Anhui Jianzhu UniversityHefei 230601China

Carbon-supported platinum-lanthanum(Pt-Ln)intermetallic compound(IMC)nanoparticles with high activity and robust stability have been demonstrated as promising cathode catalysts for proton-exchange membrane fuel ***,the preparation of Pt-Ln IMC catalysts needs high-temperature annealing treatment that inevitably causes nanoparticle sintering,resulting in significant reduction of the electrochemical surface area and mass-based ***,we prepare small-sized M-doped Pt_(5)Ce(M=Ga,Cd,and Sb)IMCs catalysts via a low-melting-point metal doping *** speculate that the doping of low-melting-point metals can facilitate the generation of vacancies in the crystal lattice through thermal activation and thus reduce the kinetic barriers for the formation of intermetallic Pt_(5)Ce *** prepared Ga-doped Pt_(5)Ce catalyst exhibits a higher electrochemical active surface area(81 m^(2)·gPt^(-1))and a larger mass activity(0.45 A·mgPt^(-1)at 0.9 V)over the undoped Pt_(5)Ce and commercial Pt/C *** the membrane electrode assembly test,the Ga-doped Pt_(5)Ce cathode delivers a power density of 0.98 W·cm^(-2)at 0.67 V,along with a voltage loss of only 27 mV at 0.8 A·cm^(-2)at the end of accelerated stability test.

关键词： P5Ce low-melting-point metal small-sized intermetallic compound catalysis fuel cells

Constructing a 3D multichannel structure to enhance performance of Ni–Co–Mn hydroxide electrodes for flexible supercapacitors

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第1期43卷 148-163页

作者： Zhi-Hui xu Shi-Shuai Sun xue-Lei Li Zhi-Hui Zhang hai-ying Li Shuang-Ting Ruan Shou-Gen yin Key Laboratory of Display Materials and Photoelectric Devices(Ministry of Education)and Tianjin Key Laboratory for Photoelectric Materials and Devices School of Materials Science and EngineeringTianjin University of TechnologyTianjin 300384China College of Science Tianjin University of TechnologyTianjin 300384China School of Materials Science and Engineering Inner Mongolia University of TechnologyHohhot 010051China

The balancing of the electrochemical performance,mechanical stability,and processing technology for applying supercapacitors to flexible and wearable electronics continues to encounter severe ***,we prepare Ni-Co-Mn hydroxide electrodes with a threedimensional multichannel structure via a simple hydrothermal *** are constructed using vertically contiguous nano sheets with a uniform thickness and rough *** electrodes can provide numerous electroactive sites and accelerate the transmission of electrolyte *** relationship between the structure and electrochemical performances is verified by experiments and theoretical ***-dimensional(2D)planar and one-dimensional(1D)fiber electrodes are prepared using a flexible carbon cloth(CC)and carbon fiber(CF),respectively,as *** assembled quasi-solid-state flexible asymmetric supercapacitor(FASC)with a twodimensional sandwich structure using NiCoMn-OH/CC as the electrode achieves a remarkable energy density of73.8 Wh·kg^(-1)at a power density of 1.03 kW·kg^(-1).The quasi-solid-state FASC with a 1D linear structure using NiCoMn-OH/CF as the electrode also attains a high energy density(12.9 Wh·kg^(-1)at a power density of0.75 W·kg^(-1)).Moreover,the electrochemical performances of the NiCoMn/CC//AC/CC and NiCoMn/CF//AC/CF FASCs are not disturbed at different bending angles(0°,45°,90°,135°and 180°),This indicates the superior flexibility of the *** also assemble a self-powered energy-harvesting storage system by integrating FASCs and commercial solar cells to verify its *** displays sustainable development potential for energy storage.

关键词： Supercapacitors Flexible Ni–Co–Mn hydroxide 3D multichannel structure High performances

High-performance grinding of ceramic matrix composites

在线全文

学校读者我要写书评

暂无评论

Nanotechnology and Precision Engineering 2024年第3期7卷 45-55页

作者： Jingfei yin Jiuhua xu Honghua Su College of Mechanical and Electrical Engineering Nanjing University of Aeronautics and AstronauticsNanjing 210016China Department of Technology Center AECC Shenyang Liming Aero-engine Co.Ltd.Shenyang 110043China

Ceramic matrix composites(CMCs)are highly promising materials for the next generation of ***,machining of CMCs suffers from low efﬁciency and poor surfaceﬁnish,which presents an obstacle to their wider *** overcome these problems,this study investigates high-efﬁciency deep grinding of CMCs,focusing on the effects of grinding *** results show that both the sur-face roughness and the depth of subsurface damage(SSD)are insensitive to grinding *** material removal rate can be increased sixfold by increasing the grinding depth,while the surface roughness and SSD depth increase by only about 10%.Moreover,it is found that the behavior of material removal is strongly dependent on grinding *** the grinding depth is increased,ﬁbers are removed in smaller sizes,with theﬁber length in chips being reduced by about 34%.However,too large a grinding depth will result in blockage by chip powder,which leads to a dramatic increase in the ratio of tangential to normal grinding *** study demonstrates that increasing the depth of cut is an effective approach to improve the machining efﬁciency of CMCs,while maintaining a good surfaceﬁ*** provides the basis for the further development of high-performance grinding methods for CMCs,which should facilitate their wider application.

关键词： Ceramic matrix composite Grinding Surfaceﬁnish Subsurface damage Fiber breakage

A Rendezvous Mission to the Second Earth Trojan Asteroid 2020 XL_5 with Low-Thrust Multi-Gravity Assist Techniques

在线全文

学校读者我要写书评

暂无评论

Research in Astronomy and Astrophysics 2024年第1期24卷 245-264页

作者： Shi-hai Yang Bo xu Xin Li School of Aeronautics and Astronautics Sun Yat-sen UniversityShenzhen 518107China

As the second of Earth's Trojan asteroids, 2020 XL_(5) is worthy of rendezvous and even sample return missions in many aspects. In this paper, a rendezvous mission to Earth's second Trojan asteroid 2020 XL_(5) is ***, due to its high inclination and large eccentricity, direct impulsive transfer requires large amounts of fuel consumption. To address this challenge, we explore the benefits of electric propulsion and multi-gravity assist techniques for interplanetary missions. These two techniques are integrated in this mission design. The design of a low-thrust gravity-assist(LTGA) trajectory in multi-body dynamics is thoroughly investigated,which is a complex process. A comprehensive framework including three steps is presented here for optimization of LTGA trajectories in multi-body dynamics. The rendezvous mission to 2020 XL_(5) is designed with this three-step approach. The most effective transfer sequence among the outcomes involves Earth–Venus–Earth–Venus-2020 XL_(5). Numerical results indicate that the combination of electric propulsion and multi-gravity assists can greatly reduce the fuel consumption, with fuel consumption of 9.03%, making it a highly favorable choice for this rendezvous mission.

关键词： minor planets asteroids:general celestial mechanics Planetary Systems

Transverse mode-coupling instability with longitudinal impedance

在线全文

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第6期35卷 40-53页

作者： hai-Sheng xu Chun-Tao Lin Na Wang Jing-Ye xu Yuan Zhang Key Laboratory of Particle Acceleration Physics and Technology Institute of High Energy PhysicsChinese Academy of SciencesBeijing 100049China University of Chinese Academy of Sciences Beijing 100049China Institute of Advanced Science Facilities Shenzhen 518107GuangdongChina

Transverse mode-coupling instability(TMCI)is a dangerous transverse single-bunch instability that can lead to severe par-ticle *** mechanism of TMCI can be explained by the coupling of transverse coherent oscillation modes owing to the transverse short-range wakefield(i.e.,the transverse broadband impedance).Recent studies on future circular colliders,e.g.,FCC-ee,showed that the threshold of TMCI decreased significantly when both longitudinal and transverse impedances were *** performed computations for the circular electron-positron collider(CEPC)and observed a similar *** studies on the influence of longitudinal impedance on the TMCI threshold were *** concluded that the imaginary part of the longitudinal impedance,which caused a reduction in the incoherent synchrotron tune,was the primary reason for the reduction in the TMCI ***,the real part of the longitudinal impedance assists in increasing the TMCI threshold.

关键词： Transverse mode-coupling instability Longitudinal impedance

Alkylene-functionality in bridged and fused nitrogen-rich poly-cyclic energetic materials:Synthesis,structural diversity and energetic properties

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第5期35卷 18-46页

作者： Man xu Nanxi Xiang Ping yin Qi Lai Siping Pang School of Materials Science&Engineering Beijing Institute of TechnologyBeijing 100081China Beijing Institute of Technology Chongqing Innovation Center Chongqing 401120China

From the standpoint of chemical structures,the organic backbones of energetic materials can be classified into aromatic rings,nonaromatic rings,and open *** the category of aromatic energetic compounds exhibits several advantages in the regulation of energetic properties,the nonaromatic heterocycles,assembling nitramino explosophores with simple alkyl bridges,still have prevailed in benchmark *** methylene bridge plays a pivotal role in the constructions of the classic nonaromatic heterocycle-based energetic compounds,e.g.,hexahydro-1,3,5-trinitro-1,3,5-triazine(RDX)and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine(HMX),whereas ethylene bridge is the core moiety of state-of-the-art explosive 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane(CL-20).In this context,it is of great interest to employ simple and practical bridges to assemble aromatic and nonaromatic nitrogen-rich heterocycles,thereby expanding the structural diversity of energetic materials,e.g.,bridged and fused nitrogen-rich ***,alkyl-bridged poly-heterocycles highlight the potential for the open chain type of energetic *** this review,the development of alkyl bridges in linking nitrogen-rich heterocycles is presented,and the perspective of the newly constructed energetic backbones is summarized for the future design of advanced energetic materials.

关键词： Energetic materials Alkyl bridge strategy Nitrogen-rich azoles Fused heterocycles Azoles