检索结果-南通市图书馆

Room-Temperature d^(0) Ferromagnetism in Nitrogen-Doped In_(2)O_(3) Films

在线全文

学校读者我要写书评

暂无评论

Chinese Physics Letters 2013年第7期30卷 225-228页

作者： SUN Shao-Hua WU Ping xing peng-fei Department of Applied Physics Institute of Advanced Materials PhysicsTianjin Key Laboratory of Low-Dimensional Materials Physics and Preparing TechnologyFaculty of ScienceTianjin UniversityTianjin 300072

N-doped In_(2)O_(3) films were deposited on fused quartz substrates by radio-frequency magnetron sputtering with different N_(2) flux.X-ray diffraction patterns,x-ray photoelectron spectroscopy and the optical transmittance spectra indicate that nitrogen has incorporated into the In_(2)O_(3) ***-temperature d^(0) ferromagnetism is observed in all the *** saturation magnetization increases from 0.73 to 3.5 emu/cm^(3) when the N_(2) flux varies from 0 to 10 *** concordant results in structural,compositional,optical and magnetic properties suggest that this d^(0) ferromagnetism is associated with the N incorporation and may be mediated by the long-range p–p interaction between the N 2p states.

关键词： magnetization fused

Control mechanism of a cable truss system for stability of roadways within thick coal seams

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Central South University 2017年第5期24卷 1098-1110页

作者： YAN Hong HE Fu-lian LI Lin-yue FENG Rui-min xing peng-fei Key Laboratory of Deep Coal Resource Mining Ministry of Education of China (School of Mines China University of Mining & Technology) Faculty of Resources and Safety Engineering China University of Mining and Technology (Beijing) Guizhou Xinlian Blasting Engineering Group Co. Ltd. Department of Mining and Mineral Resources Engineering Southern Illinois University

Cable truss systems have been widely applied in roadways with complicated conditions, such as the large cross-sections of deep wells, and high tectonic stress. However, they are rarely applied to roadways with extremely thick coal seams because the control mechanism of the system for the deformation of the roof and the separation between coal rock segments is not completely understood. By using the relationship between the support system and the roof strata, a mechanical model was established to calculate the deformation of the roof in a thick coal seam with bedding separation under different support conditions: with an anchor truss support and without support. On this basis, the research was used to deduce a method for computing the minimum pre-tightening forces in the anchor truss, the maximum amounts of subsidence and separation with, and without, anchor truss support under the roof, and the maximum subsidence and the decreasing amounts of the separation before and after adopting the anchor truss. Additionally, mechanical relationships between the minimum pre-tightening force and the anchoring force in the anchor were analyzed. By taking a typical roadway with thick coal roof as an example, the theoretical results mentioned above were applied in the analysis and testing of a roof supporting project in a roadway field to verify the accuracy of the theory: favorable experimental results were achieved. In addition, the relationships among other parameters were analyzed, including the minimum pre-tightening forces applied by the anchor truss, the angle of inclination of the anchor cable, and the array pitch. Meanwhile, the changing characteristics of the amounts of roof separation and subsidence with key parameters of the support system(such as array pitch, pre-tightening force, and inclination angle) were also analyzed. The research results revealed the acting mechanism of the anchor truss in control of roadway stability with a thick coal seam, providing a theoretic

关键词： cable truss system thick coal seam roof separation pre-tightening force

Coupling of RANS and BEM Solvers for Simulation of Propeller Behind the Hull in Full Appended Model

在线全文

学校读者我要写书评

暂无评论

China Ocean Engineering 2024年第3期38卷 424-438页

作者： Saeed NAJAFI Mehdi POURMOSTAFA LIU peng-fei Iranian National Institute for Oceanography and Atmospheric Science(INIOAS) Tehran 14155-4781Iran Department of Maritime Engineering Amir Kabir University of TechnologyTehran 15875-4413Iran Marine Offshore and Subsea TechnologySchool of EngineeringNewcastle UniversityNewcastle upon TyneNE17RUUK

To design a propeller for ship power plant,the interaction between ship hull and propeller must be taken into *** main concern is to apply the wake effect of ship stern on the propeller *** this paper,a coupled BEM(Boundary Element Method)/RANS(Renolds-Averaged Navier−Stokes)solver is used to simulate propeller behind the hull in the self-propulsion *** motivation of this work is to develop a practical tool to design marine propulsion system without suffering long computational *** unsteady boundary element method which is also known as panel method is chosen to estimate the propeller *** wakes are treated using a time marching wake alignment ***,a RANS code coupled with VoF equation is developed to consider the ship motions and wake field effects in the problem.A coupling algorithm is developed to interchange ship wake field to the potential flow solver and propeller thrust to the RANS *** on the difference between hull resistance and the propeller thrust,a PI controller is developed to compute the propeller RPM in every time *** of the solver is carried out using the towing tank test report of a 50 m oceanography research *** factor and trust deduction coefficient are estimated ***,the wake rollup pattern of the propeller in open water is compared with the propeller in real wake field.

关键词： RANS BEM coupled method ship propeller self-propulsion wake sheet pattern

Frequency Response of Modulated Electroluminescence of Light-Emitting Diodes

在线全文

学校读者我要写书评

暂无评论

Chinese Physics Letters 2011年第10期28卷 244-247页

作者： FENG Lie-Feng LI Yang LI Ding WANG Cun-Da ZHANG Guo-Yi YAO Dong-Sheng LIU Wei-Fang xing peng-fei Department of Applied Physics Tianjin UniversityTianjin 300072 Research Center for Wide-band Gap Semiconductors School of PhysicsPeking UniversityBeijing 100871

Frequency responses of modulated electroluminescence(EL)of light-emitting diodes were measured using a testing *** increasing frequency of the ac signal,the relative light intensity(RLI)clearly ***,a peculiar asynchrony between the RLI and ac small-signal is *** frequencies higher than 10 kHz,the RLI clearly lags behind the ac signal and the absolute value of the lagging angle is nearly proportional to the signal *** the classical recombination model of light-emitting diodes under ac small-signal modulation,these abnormal characteristics of modulated EL can be clearly explained.

关键词： diodes absolute testing

Multiple factors influencing high-purity indium electrolytic refining

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第7期71卷 148-160页

作者： Hong-Qiang Fan fei Li Hong-xing Zheng Wu-ji Pan Mei-Zhen Wu Yashar Behnamian Ju-Bo peng Dong-Hai Lin State Key Laboratory of Advanced Special Steel&School of Materials Science and Engineering Shanghai UniversityShanghai 200444China Shanghai Engineering Research Center for Integrated Circuits and Advanced Display Materials Shanghai UniversityShanghai 200444China Research&Development Center Yunnan Tin Group(Holding)Limited CompanyKunming 650032China Department of Chemical and Materials Engineering University of AlbertaEdmonton T6G 2V4AlbertaCanada School of Energy and Materials Shanghai Key Laboratory of Engineering Materials Application and EvaluationShanghai Polytechnic UniversityShanghai 201209China

The effects of various contaminants in the electrolytic refinement of indium were investigated using a glow discharge mass spectrometer(GDMS).The effects of several factors such as the indium ion(In3+)concentration,the sodium chloride(NaCl)concentration,the current density,the gelatin concentration,the pH,and the electrode distance,were *** variations in impurity levels concerning gelatin concentration were *** the gelatin and In3+concentration were moderately positively correlated with the Pb *** Sb concentration was associated positively with the NaCl concentration,while the Ti concentration had an adverse correlation with the NaCl *** Bi element content was positively linked to the electrode *** the current density increased,Cu,Pb,and Bi impurities initially rose and then eventually ***,a critical current density of 45 A·m^(-2) was identified in this behavior.

关键词： High-purity indium Electrolysis Multiple factors Electrochemistry Purification

On the Factors Influencing the High Stretch-Flangeability of a Low-Density 1180 MPa Fe-Mn-Al-C-Nbδ-QP Steel

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第8期37卷 1291-1300页

作者： Dan‑Dan Cui peng Chen peng‑fei Wang Xiao‑Wu Li Department of Materials Physics and Chemistry School of Materials Science and Engineeringand Key Laboratory for Anisotropy and Texture of Materials(Ministry of Education)Northeastern UniversityShenyang 110819China State Key Laboratory of Rolling and Automation Northeastern UniversityShenyang 110819China

Low-densityδ-quenching and partitioning(δ-QP)steels with excellent strength and ductility have been recently ***,there are still rare reports on the formability of δ-QP steels,which are critical for satisfying the manufacture of structural parts during the application in automotive *** the present work,an 1180 MPa Fe–Mn–Al–C–Nbδ-QP steel with a high ductility was adopted for the stretch–flangeability ***δ-QP steel was developed by separated quenching and partitioning processes.A good hole expansion ratio(HER)of 34.9±0.9%was obtained in the quenched steel,but it has been further increased to 52.2%by the tempering *** improved stretch–flangeability was attributed to the enhanced austenite stability and deformation *** the one hand,the stability of austenite was increased by carbon partitioning during tempering,which reduced crack possibility via the suppression of the fresh martensite *** the other hand,the tempering treatment released the internal stress caused by martensitic transformation and reduced the difference in strength among different phases,resulting in an increase in the resistance to crack initiation and propagation.

关键词： Hole expansion ratio Low-densityδ-quenching and partitioning(δ-QP)steel Stretch-flangeability Austenite stability Deformation uniformity

Kinetic-Thermodynamic Promotion Engineering toward High-Density Hierarchical and Zn-Doping Activity-Enhancing ZnNiO@CF for High-Capacity Desalination

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第8期16卷 35-50页

作者： Jie Ma Siyang xing Yabo Wang Jinhu Yang fei Yu College of Marine Ecology and Environment Shanghai Ocean University201306 ShanghaiPeople’s Republic of China School of Civil Engineering Kashi University844000 KashiPeople’s Republic of China Research Center for Environmental Functional Materials College of Environmental Science and EngineeringTongji University1239 Siping Road200092 ShanghaiPeople’s Republic of China School of Chemical Science and Engineering Tongji University1239 Siping Road200092 ShanghaiPeople’s Republic of China Department of Energy Environmental&Chemical EngineeringWashington University in St.LouisSt.LouisMO 63130USA

Despite the promising potential of transition metal oxides(TMOs)as capacitive deionization(CDI)electrodes,the actual capacity of TMOs electrodes for sodium storage is significantly lower than the theoretical capacity,posing a major ***,we prepared the kinetically favorable Zn_(x)Ni_(1−x)O electrode in situ growth on carbon felt(Zn_(x)Ni_(1−x)O@CF)through constraining the rate of OH^(−)generation in the hydrothermal ***_(x)Ni_(1−x)O@CF exhibited a high-density hierarchical nanosheet structure with three-dimensional open pores,benefitting the ion transport/electron *** tuning the moderate amount of redox-inert Zn-doping can enhance surface electroactive sites,actual activity of redox-active Ni species,and lower adsorption energy,promoting the adsorption kinetic and thermodynamic of the Zn_(0.2)Ni_(0.8)O@*** from the kinetic-thermodynamic facilitation mechanism,Zn_(0.2)Ni_(0.8)O@CF achieved ultrahigh desalination capacity(128.9 mgNaCl g^(-1)),ultra-low energy consumption(0.164 kW h kgNaCl^(-1)),high salt removal rate(1.21 mgNaCl g^(-1) min^(-1)),and good *** thermodynamic facilitation and Na^(+)intercalation mechanism of Zn_(0.2)Ni_(0.8)O@CF are identified by the density functional theory calculations and electrochemical quartz crystal microbalance with dissipation monitoring,*** research provides new insights into controlling electrochemically favorable morphology and demonstrates that Zn-doping,which is redox-inert,is essential for enhancing the electrochemical performance of CDI electrodes.

关键词： Zinc-nickel metal oxide High-density hierarchical Capacitive deionization Zinc-doping

Flow characteristics at low Reynolds number around two in-line circular cylinders with slits

在线全文

学校读者我要写书评

暂无评论

Journal of Central South University 2019年第8期26卷 2021-2028页

作者： SUN Zhi-qiang ZHANG Yu-zhuo xing peng-fei LI Sai-wei School of Energy Science and Engineering Central South University

This study investigated numerically the characteristics of laminar flow around two identical circular cylinders placed in tandem, with slits of the same width through their respective axis. The center to center distance between the cylinders and the slit orientation were varied to study their effects on the flow structure, lift and drag, and vortex shedding characteristics. It was found that three flow regimes could be distinguished, the transitions between which could be indicated by the sudden changes in drag and lift. Asymmetrically, configured slits destabilized the stagnant region between cylinders;whereas in-line slits connect the two cylinders to act as a single elongated bluff body, even at large cylinder separation, by stabilizing the stagnant region in between. These in turn strongly modified the transition between flow regimes. Vortex shedding was also strongly influenced by both slit configuration and cylinder separation.

关键词： two cylinders in tandem circular cylinder with slit vortex shedding laminar wake flow

Design and implementation of a multi-tile parallel scanning rasterization accelerator

在线全文

学校读者我要写书评

暂无评论

The Journal of China Universities of Posts and Telecommunications 2024年第2期31卷 94-104页

作者： xing Lidong Guo Qiang peng Xinlong Feng Zhenfu School of Electronic Engineering Xi'an University of Posts and TelecommunicationsXi'an 710121China

In the design of a graphic processing unit(GPU),the processing speed of triangle rasterization is an important factor that determines the performance of the *** architecture of a multi-tile parallel-scan rasterization accelerator was proposed in this *** accelerator uses a bounding box algorithm to improve scanning *** rasterizes multiple tiles in parallel and scans multiple lines at the same time within each *** highly parallel approach drastically improves the performance of *** the 65 nm process standard cell library of Semiconductor Manufacturing International Corporation(SMIC),the accelerator can be synthesized to a maximum clock frequency of 220 *** implementation on the Genesys2 field programmable gate array(FPGA)board fully verifies the functionality of the *** implementation shows a significant improvement in rendering speed and efficiency and proves its suitability for high-performance rasterization.

关键词： graphic processing unit(GPU) rasterization multi-tile parallelism