检索结果-南通市图书馆

Online estimation and characteristic analysis of double nugget diameters during aluminum/steel resistance spot welding process

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第8期31卷 2053-2067页

作者： Kang Zhou wen-xiao Yu Bao-kai Ren Gang Wang School of Mechatronical Engineering Beijing Institute of TechnologyBeijing 100081China

Online estimation of the double nugget diameters was performed by means of a back propagation neural *** double nugget diameters were obtained using actual welding experiment and numerical simulation,according to different characteristics of aluminum nugget and steel *** input of the neural network was some key characteristic parameters extracted from dynamic power signal,which were peak point,knee point and their variation rate over time,as well as heat energy delivered into the welding *** architecture of the neural network was confirmed by confirming the number of neurons in hidden layer through a series of *** key parameters of the neural network were obtained by means of training 81 arrays of data ***,the neural network was used to test the remaining 20 arrays of verifying data set,and the results showed that both of the mean errors for the two nugget diameters were below 3%.In addition,corresponding analyses showed that the accuracy of two nugget diameters was higher than that of tensile-shear strength.

关键词： Resistance spot welding Aluminum Steel Double nugget Dynamic power signal.Neural network

Design and preparation of highly crystalline K-intercalated W@PCN:an efficient material for aniline elimination

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第3期43卷 1337-1342页

作者： Hao-Fei Li kai-wen Yu xiao-Bi Jing Lei Duan Yi-Yang Zhang School of Chemistry and Chemical Engineering Yangzhou UniversityYangzhou225002China School of Mechanical Engineering Yangzhou UniversityYangzhou225127China School of Material Science and Engineering Huazhong University of Science and TechnologyWuhan430071China School of Chemical Engineering and Materials Changzhou Institute of TechnologyChangzhou213032China Department of Basic Courses Army Engineering University of PLANanjing211101China

In this paper,we designed and prepared the polymeric carbon nitride-supported tungsten(W@PCN)*** were employed as the catalysts for photocatalytic oxidation of aniline in *** the process,H_(2)O_(2)was initially generated via the PCN-catalyzed *** by supported tungsten,aniline was oxidized by the in situ generated H_(2)O_(2)to obtain less toxicpoly aniline.

关键词： materials aniline crystalline

Automatic velocity picking based on optimal key points tracking algorithm

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第2期21卷 903-917页

作者： Yong-Hao Wang wen-kai Lu Song-Bai Jin Yang Li Yu-Xuan Li xiao-Feng Gu The Institute for Artificial Intelligence(THUAI) Tsinghua UniversityBeijing100084China State Key Laboratory of Intelligent Technology and Systems Tsinghua UniversityBeijing100084China Beijing National Research Center for Information Science and Technology(BNRist) Beijing100084China The Department of Automation Tsinghua UniversityBeijing100084China

Picking velocities from semblances manually is laborious and necessitates experience. Although various methods for automatic velocity picking have been developed, there remains a challenge in efficiently incorporating information from nearby gathers to ensure picked velocity aligns with seismic horizons while also improving picking accuracy. The conventional method of velocity picking from a semblance volume is computationally demanding, highlighting a need for a more efficient strategy. In this study, we introduce a novel method for automatic velocity picking based on multi-object tracking. This dynamic tracking process across different semblance panels can integrate information from nearby gathers effectively while maintaining computational efficiency. First, we employ accelerated density clustering on the velocity spectrum to discern cluster centers without the requirement for prior knowledge regarding the number of clusters. These cluster centers embody the maximum likelihood velocities of the main subsurface structures. Second, our proposed method tracks key points within the semblance volume. Kalman filter is adopted to adjust the tracking process, followed by interpolation on these tracked points to construct the final velocity model. Our synthetic data example demonstrates that our proposed algorithm can effectively rectify the picking errors of the clustering algorithm. We further compare the performances of the clustering method(CM), the proposed tracking method(TM), and the variational method(VM) on a field dataset from the Gulf of Mexico. The results attest that our method offers superior accuracy than CM, achieves comparable accuracy with VM, and benefits from a reduced computational cost.

关键词： Velocity picking Multi-object tracking Density clustering Kalman filter

A topology approach to overcome the pore size/volume trade-offs for autonomous indoor humidity control

在线全文

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第9期67卷 2968-2974页

作者： Zhi-Shuo Wang Xue-wen Zhang kai Zheng xiao-Xian Chen Dong-Dong Zhou Jie-Peng Zhang MOE Key Laboratory of Bioinorganic and Synthetic Chemistry GBRCE for Functional Molecular EngineeringSchool of ChemistryIGCMESun Yat-Sen UniversityGuangzhou 510275China Chemistry and Chemical Engineering Guangdong Laboratory Shantou 515021China

Autonomous indoor humidity control is gaining more and more attention but is limited by the trade-offs among pore volume,pore size and water stability of water *** solve this problem by using a unique coordination network topology combined with hydrolytically stable M(Ⅲ)carboxylate *** extending the ligand length from 9.0 to 11.2 and 13.7?,the pore volume significantly increases from 0.99 to 1.40 and 1.78 cm^(3)g^(-1),which proportionally increases the saturated water adsorption ***,the pore size slightly increases from 10.4 to 11.0 and 13.5A,which restricts the isotherm inflection pressure and hysteresis width to meet the requirement of indoor humidity *** single-crystals suitable for Xray diffraction studies were obtained by using Fe(Ⅲ)salts,while isostructural frameworks with sufficiently high water stabilities were synthesized by using Cr(Ⅲ)salts,which offer record working capacity of 0.90 and 1.10 g g^(-1)for indoor humidity control.

关键词： metal-organic frameworks water adsorption indoor humidity control water stability pore engineering

Simultaneously enhancing erosion and compression resistance:designing AlCoCrFeNi high-entropy alloy strengthened Ag-based contacts

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第9期43卷 4476-4492页

作者： xiao-Yang Xue Zhe Wang Hui-Ling Nie Zhao Yuan Jun Wang Chang-Hu Xu kai wen Cong-Hao Yu School of Materials Science and Engineering Xi’an Polytechnic UniversityXi’an 710048China School of Physics Xi’an Jiaotong UniversityXi’an 710049China Key Laboratory of Pulsed Power Technology School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430074China State Key Laboratory of Advanced Electromagnetic Engineering and Technology School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430074China

Designing microstructures and unveiling dynamic erosion mechanisms remain important challenges for Ag-based *** simultaneously enhance erosion and compression resistance,an Al Co Cr Fe Ni high-entropy alloy(HEA)is introduced into Ag-based materials to fabricate novel Ag-HEA contacts with island-and skeletonrestricted *** arc erosion experimental results reveal that the skeleton-restricted HEA microstructure is the key factor in reducing the hill and crater morphologies of the contact surface,effectively delaying material transfer between the movable and stationary *** molten bridge evolution and compressive deformation behavior of Ag-HEA contacts with various microstructures are investigated using molecular dynamics(MD)*** results indicate that the constraint of Ag atom diffusion in the molten pool and the involvement of HEA atoms in the molten bridge are the primary mechanisms for improving erosion *** skeleton-restricted HEA microstructure reduces the total energy and structural stability of the molten bridge system and promotes its fracture and ***,the synergistic effect of the twin and Lomerz–Cottrell lock structures can hinder dislocation glide,generating dispersed and small-area stacking faults in the Ag matrix and mitigating the concentration of shear ***,the skeleton-restricted HEA microstructure contributes positively to compression *** study presents a novel approach to designing Ag-based contacts.

关键词： Electrical contact materials High entropy alloys Arc erosion Molecular dynamics Microstructures

Thermodynamic nature of black holes in coexistence region

在线全文

学校读者我要写书评

暂无评论

Science China(Physics,Mechanics & Astronomy) 2024年第5期67卷 27-32页

作者： Shao-wen Wei Yu-xiao Liu Lanzhou Center for Theoretical Physics Key Laboratory of Theoretical Physics of Gansu Provinceand Key Laboratory of Quantum Theory and Applications of Mo ELanzhou UniversityLanzhou 730000China Institute of Theoretical Physics&Research Center of Gravitation Lanzhou UniversityLanzhou 730000China

Studying the system state of coexistence regions will peek into to reveal microscopic interactions between different phases of a thermodynamic ***,there is no effective method to study thermodynamic nature of the coexistence black hole regions for the failure of the equation of *** at these coexistence states,in this work,we develop a general approach by introducing two new ratio *** first one is the ratio of the horizon radii of the saturated coexistence small and large black holes,and the second one measures that of the small black hole molecule number to the total molecule *** demonstrate that the first parameter can serve as an order parameter to characterize the first-order phase *** study also shows that the black hole state in the coexistence region is uniquely determined by these two introduced parameters bounded between 0 and *** results are quite significant in the analytical study of phase transition and the microscopic nature of black hole in the coexistence regions.

关键词： transition. state. thermodynamic

Synthesis of lithium difluoro(oxalate)borate(LiODFB), phase diagram and ions coordination of LiODFB in dimethyl carbonate

在线全文

学校读者我要写书评

暂无评论

Journal of Central South University 2018年第3期25卷 550-560页

作者： ZHOU Hong-ming xiao kai-wen LI Jian xiao De-min JIANG Yi-xiong School of Materials Science and Engineering Central South University Hunan Zhengyuan Institute for Energy Storage Materials and Devices

A new two-step synthetic method was successfully developed to simplify the recrystallization process of lithium difluoro(oxalate)borate(LiODFB).Meanwhile,the purity of LiODFB as-prepared was determined by NMR,ICP-AES and Karl Fisher measurements,*** as-prepared LiODFB presents a high purity up to 99.95%.Its metal ions and water contents are under good control as ***,its structure information and thermal properties were confirmed by FTIR,Raman and DSC-TGA analyses,*** exerts fine thermostability and hypo-water-sensitivity and its structure information agrees well with previous ***,a combination of phase diagram and Raman spectroscopy were utilized to study the thermal phase behavior and ions coordination of LiODFB-DMC binary system to optimize the synthesis and recrystallization *** there are three types of molecular interaction forms(CIPs,AGG-IIa,AGG-IIIb)in LiODFB-DMC binary system,LiODFB can only be isolated as large single crystal solvate as LiODFB·(DMC)3/2 by slowly cooling subjected to the nucleation ***,the fundamental information of our work is helpful in accelerating the application of LiODFB in Li-ion secondary batteries.

关键词： lithium difluoro(oxalate)borate two-step synthesis recrystallization phase diagram ions coordination

在线全文

学校读者我要写书评

暂无评论

板结构静载荷的损伤检测算法

计量学报 2009年第6期30卷 -页

作者：潘晓文曾捷梁大开何仁 xiao-wen Da-kai 南京航空航天大学智能材料与结构航空科技重点实验室江苏南京210016 福建农林大学计算机与信息学院福建福州350002 江苏大学江苏省汽车工程重点实验室江苏镇江212013

在四周固支板结构上施加一个静载荷,求所测得的应变向量的单位向量,该单位向量与载荷大小无关,与加载位置有关,称为"模式".根据有限元理论,当某个单元出现了损伤,损伤对应变场的影响相当于一些附加载荷作用在完好结构上,且这些附加载荷... 详细信息

在四周固支板结构上施加一个静载荷,求所测得的应变向量的单位向量,该单位向量与载荷大小无关,与加载位置有关,称为"模式".根据有限元理论,当某个单元出现了损伤,损伤对应变场的影响相当于一些附加载荷作用在完好结构上,且这些附加载荷作用在损伤所在的单元节点上.损伤检测的问题就成为多载荷识别问题.将损伤前后的模式进行相关分析,可以识别附加载荷位置,判别加载点是否是损伤位置.通过在结构上逐点加载,可以发现结构上出现的所有损伤.Abstract：When a force loads on a four-edge clamped plate, the normalized strain vector which is called "pattern" is not related to the intensity of force. It is the structural response to the position of force. According to FEM theory, when an element is damage, the strain field can be affect by damage, the effect of damage can be equivalent to extra forces loading on intact structure. These extra forces act on the nodes of damaged element. Damage identification can be replaced by extra forces identification. The correlation coefficient is calculated by health pattern and damage pattern. The position of extra forces can be judged by correlation coefficient, and damage can be located by correlation coefficient too. Loading every position on structure, all damages in structure would be identified.

关键词：板结构静载荷损伤位置检测算法 Structure correlation coefficient structure 加载点 forces Damage identification structural response 载荷作用单位向量载荷位置 strain field 有限元理论应变场相关分析识别问题损伤检测

A Numerical Calculation Algorithm of the Inclination Function Based on the Representation of SO(3) Group

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Mathematicae Applicatae Sinica 2024年第1期40卷 137-148页

作者： Yu-xiao Wei wen-lin Tang Department of Geophysics School of Geology Engineering and GeomaticsChang’An UniversityXi’an710064China Key Laboratory of Electronics and Information Technology for Space Systems National Space Science CenterChinese Academy of SciencesBeijing100190China

In the determination of the Earth gravity field in satellite geodesy, the inclination functions represent the projection of data observed along the orbital plane of a satellite orbit into the sphere in the terrestial reference frame. The inclination functions in this work is studied from a group theoretical perspective. The inclination functions are proved to generate a representation of the SO(3) group. An orthogonal relation of the inclination functions is derived and some recurrence relations for the inclination functions are given, based on which an algorithm to calculate the inclination functions is proposed.

关键词： SO(3)group inclination function satellite geodesy representation of SO(3)