检索结果-南通市图书馆

Acta Metallurgica Sinica(English Letters) 2024年第2期37卷 255-265页

作者： x.Y.Yue S.Y.Peng x.Zhang C.n.He Y.Z.Tian Key Laboratory for Anisotropy and Texture of Materials(Ministry of Education) School of Materials Science and EngineeringNortheastern UniversityShenyang110819China School of Materials Science and Engineering and Tianjin Key Laboratory of Composite and Functional Materials Tianjin UniversityTianjin300350China Research Centre for Metallic Wires Northeastern UniversityShenyang110819China

A Cu-10wt%Fe composite was prepared through hot-pressed sintering,and the material was subsequently solution *** hot-pressed sintered and solution treated materials were rolled and *** precipitation behavior and performance changes were systematically studied by using scanning electron microscopy and transmission electron *** contrast to the hot-pressed sintered specimen,the solution treatment significantly affects the thermal stability and properties of the Cu-10wt%Fe *** Cu-10wt%Fe composite was prepared after solid solution,cold rolling and aging at 773 K for 1 h,and it obtained excellent tensile strength of 494 MPa,uniform elongation of 16.3%,electrical conductivity of 51.1%IACS and softening temperature of 838 *** for the distinct difference in thermal stability and properties between hot-pressed sintered and solution treated specimens were *** findings provide a theoretical basis for designing high-performance Cu-based in-situ composites by post treatment.

关键词： Cu-Fe composite Hot-pressed sintering Thermal stability Strength Electrical conductivity

Hard yet tough and self-lubricating(CuniTinbCr)C_(x) high-entropy nanocomposite films:Effects of carbon content on structure and properties

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第6期173卷 20-30页

作者： Y.T.Li x.M.Chen x.K.Zeng M.Liu x.Jiang Y.x.Leng Key Laboratory of Advanced Technologies of Materials Ministry of EducationSchool of Materials Science and EngineeringSouthwest Jiaotong UniversityChengdu 610031China Key Laboratory of noise and Vibration Research Institute of AcousticsChinese Academy of SciencesBeijing 100190China State Key Laboratory of Acoustics Institute of AcousticsChinese Academy of SciencesBeijing 100190China School of Mechanical and Electrical Engineering Mianyang Teachers’CollegeMianyang 621000China

The single-phase high-entropy alloy film is difficult to meet severe friction conditions due to its low hardness and high friction ***-composite structure film is composed of at least two separated phases,showing the properties of strength and toughness integration and excellent wear *** design of nanocomposite structures can effectively improve the mechanical properties and tribological properties of high-entropy alloy *** this study,the(CuniTinbCr)C_(x) nanocomposite high-entropy films(HEFs)integrated with high hardness,high toughness,and self-lubrication were synthesized by the double-target co-sputtering *** effect of carbon content on microstructure,mechanical properties,and tribological properties of(CuniTinbCr)C_(x) films was *** the increase of carbon content in the HEFs,the carbon atoms preferentially react with Ti,nb,and Cr to form a(TinbCr)C ceramic-reinforced phase,and then the excess carbon atoms precipitate in the form of amorphous carbon(a-C)lubricating phase in the *** structure of the HEFs changes from an amorphous structure to a nanocomposite structure of amorphous(amorphous CuniTinbCr phase+a-C phase)/nanocrystalline(Tin-bCr)C *** the carbon content is about 21.2 at.%,the carbide phase in the film reaches saturation and the hardness and modulus of the films are highest,which are 18 GPa and 228 GPa,*** HEFs with a carbon content of 44.0 at.%show the best toughness and tribological properties with a friction coefficient of 0.16 and a wear rate of 2.4×10^(-6) mm^(3)/(n m),which is mainly attributed to the excellent resistance to fatigue crack growth and the interfacial lubricating layer formed in the friction *** nanocomposite(CuniTinbCr)C_(x) HEFs show very promising application prospect in the field of friction protection.

关键词： High-entropy films nanocomposite double-target co-sputtering Strengthening-toughening Tribological properties

discovery of new MAx-phase-like layered ternary carbide V_(8)P_(6)C:Crystal structure,thermal expansion,and elastic properties

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第7期174卷 55-62页

作者： H.x.Chen L.Sheng Z.L.Zhang x.C.Wen d.L.Yang x.Y.Ye P.Q.dai School of Materials Science and Engineering Fujian University of TechnologyFuzhou 350118China Beijing Synchrotron Radiation Facility Institute of High Energy PhysicsChinese Academy of ScienceBeijing 100049China Fujian Provincial Key Laboratory of Advanced Materials Processing and Application Fuzhou 350118China State Key Laboratory of Structural Chemistry Fujian Institute of Research on the Structure of MatterChinese Academy of SciencesFuzhou 350002China

due to the laminated structure,MAx phases and MAx-phase-like compounds possess outstanding dam-age tolerance capability with good thermal/electrical conductivity and other charming functional prop-erties,showing a bright future for structural-functional ***,a new MAx-phase-like ternary car-bide V_(8)P_(6)C with layered characteristics was *** to the alternate stacking of hexagonal-arranged M/A/x atom layers in MAx phases,V_(8)P_(6)C has a layered structure formed by a repeated stacking of the slabs consisting of V_(6)C-octahedrons and VP 6-distorted-octahedrons in three-atomic layers *** thermal expansion anisotropy was revealed,with the thermal expansion coefficients(TECs)along a-axis,c-axis,and the average value,equal toα_(a)=8.55(5)μK^(−1),α_(c)=10.23(5)μK^(−1),andα_(L)=9.14(5)μK^(−1),*** dilation along the c-axis was mainly dominated by out-plane V-P bonds be-tween layered *** to the pressure-dependent lattice parameters,the polycrystalline bulk modulus(B_(0)=185(9)GPa)and high compressibility anisotropy factor(B_(a)/B_(c)=1.64)was ***-while,the second-order elastic constants were calculated,and the elastic moduli,E=303 GPa,B=198 GPa,G=122 GPa,andν=0.246,were *** the weak connection between layer slabs by out-plane V1-P bond was revealed by the bond stiffness model,with a bond stiffness close to the M-A bond in MAx ***,good damage tolerance capability was predicted according to Paugh’s ratio(G/B=0.616)and Cauchy pressure(P_(a)=0 GPa,P_(c)=-7.5 GPa),even better than those of typical MAx *** discovery of V_(8)P_(6)C provides a new member of MAx-phase-like damage-tolerant ceramic with relatively low density,moderate thermal expansion,and anisotropic compressibility,and the unique lay-ered structure is inspiring for exploring new layered ternary ceramics.

关键词： new ternary carbide MAx phase Thermal expansion Elastic constants Anisotropy

Greatly enhanced corrosion/wear resistances of epoxy coating for Mg alloy through a synergistic effect between functionalized graphene and insulated blocking layer

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第1期12卷 332-344页

作者： Z.Y.xue x.J.Li J.H.Chu M.M.Li d.n.Zou L.B.Tong School of Metallurgical Engineering Xi’an University of Architecture and TechnologyXi’an 710055China State Key Laboratory of Advanced design and Manufacturing for Vehicle Body Hunan UniversityChangsha 410082China

The poor corrosion and wear resistances of Mg alloys seriously limit their potential applications in various *** conventional epoxy coating easily forms many intrinsic defects during the solidification process,which cannot provide sufficient *** the current study,we design a double-layer epoxy composite coating on Mg alloy with enhanced anti-corrosion/wear properties,via the spin-assisted assembly *** outer layer is functionalized graphene(FG)in waterborne epoxy resin(WEP)and the inner layer is Ce-based conversion(Ce)*** FG sheets can be homogeneously dispersed within the epoxy matrix to fill the intrinsic defects and improve the barrier *** Ce film connects the outer layer with the substrate,showing the transition *** corrosion rate of Ce/WEP/FG composite coating is 2131 times lower than that of bare Mg alloy,and the wear rate is decreased by~90%.The improved corrosion resistance is attributed to the labyrinth effect(hindering the penetration of corrosive medium)and the obstruction of galvanic coupling *** synergistic effect derived from the FG sheet and blocking layer exhibits great potential in realizing the improvement of multi-functional integration,which will open up a new avenue for the development of novel composite protection coatings of Mg alloys.

关键词： Mg alloy Functionalized graphene Epoxy coating Corrosion/wear resistance Blocking layer

维普期刊数据库

Experimental measurements of gamma-photon production and estimation of electron/positron production on the PETAL laser facility

在线全文

学校读者我要写书评

暂无评论

Matter and Radiation at Extremes 2024年第5期9卷 32-47页

作者： F.Brun L.Ribotte G.Boutoux x.davoine P.E.Masson-Laborde Y.Sentoku n.Iwata n.Blanchot d.Batani I.Lantuéjoul L.Lecherbourg B.Rosse C.Rousseaux B.Vauzour d.Raffestin E.d’Humières x.Ribeyre Centre Lasers Intenses et Applications UMR 5107Universitéde Bordeaux-CNRS-CEA33405 TalenceFrance CEA DAMCESTAF-33116 Le BarpFrance CEA DAMDIFF-91297 ArpajonFrance CEA LMCEUniversitéParis-Saclay91680 Bruyères-le-ChâtelFrance Institute of Laser Engineering Osaka University2-6 YamadaokaSuitaOsaka 565-0871Japan

This article reports the first measurements of high-energy photons produced with the high-intensity PETawatt Aquitaine Laser(PETAL)*** experiments were performed during the commissioning of the *** laser had an energy of about 400 J,an intensity of 8×10^(18)W cm^(−2),and a pulse duration of 660 fs(FWHM).It was shot at a 2 mm-thick solid tungsten *** high-energy photons were produced mainly from the bremsstrahlung process for relativistic electrons accelerated inside a plasma generated on the front side of the *** paper reports measurements of electrons,protons and *** electrons up to35 MeV with a few-MeV temperature were recorded by a spectrometer,called SESAME(SpectreÉlectronS Angulaire MoyenneÉnergie).K-and L-shells were clearly detected by a photon spectrometer called SPECTIx(Spectromètre PetalàCristal en TransmIssion pour le rayonnnement x).High-energy photons were diagnosed by CRACC-x(Cassette de RAdiographie Centre Chambre-rayonnement x),a bremsstrahlung *** cannon analysis is strongly dependent on the hypothesis adopted for the spectral *** shapes can exhibit similar reproductions of the experimental *** eliminate dependence on the shape hypothesis and to facilitate analysis of the data,simulations of the interaction were *** model the mechanisms involved,a simulation chain including hydrodynamic,particle-in-cell,and Monte Carlo simulations was *** simulations model the preplasma generated at the front of the target by the PETAL laser prepulse,the acceleration of electrons inside the plasma,the generation of MeV-range photons from these electrons,and the response of the detector impacted by the energetic photon *** this work enabled reproduction of the experimental *** high-energy photons produced have a large emission angle and an exponential distribution *** addition to the analysis of the photon spectra,positron production was also ***,if high

关键词： process positron hypothesis

dissipationless layertronics in axion insulator MnBi2Te4

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

national Science Review 2024年第6期11卷 189-196页

作者： Shuai Li Ming Gong Shuguang Cheng Hua Jiang x.C.xie School of Physical Science and Technology Soochow University Institute for Advanced Study Soochow University International Center for Quantum Materials School of Physics Peking University department of Physics Northwest University Interdisciplinary Center for Theoretical Physics and Information Sciences Fudan University Hefei national Laboratory

Surface electrons in axion insulators are endowed with a topological layer degree of freedom followed by exotic transport phenomena, e.g., the layer Hall effect. Here, we propose that such a layer degree of freedom can be manipulated in a dissipationless way based on the antiferromagnetic MnBi2Te4with tailored domain structure. This makes MnBi2Te4a versatile platform to exploit the ‘layertronics’ to encode, process and store information. Importantly, the layer filter, layer valve and layer reverser devices can be achieved using the layer-locked chiral domain wall modes. The dissipationless nature of the domain wall modes makes the performance of the layertronic devices superior to those in spintronics and valleytronics. Specifically, the layer reverser, a layer version of the datta–das transistor, also fills up the blank in designing the valley reverser in valleytronics. Our work sheds light on constructing new generation electronic devices with high performance and low-energy consumption in the framework of layertronics.

关键词： axion insulator MnBi2Te4 layertronics antiferromagnetic domain wall dissipationless transport

Precipitation transformation pathway and mechanical behavior of nanoprecipitation strengthened Fe-Mn-Al-C-ni austenitic low-density steel

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第7期174卷 157-167页

作者： Y.F.An x.P.Chen L.Mei P.Ren d.Wei W.Q.Cao College of Materials Science and Engineering Chongqing UniversityChongqing 400044China Guangxi Engineering Research Center for Characteristic Metallic Powder Materials School of Electronic EngineeringGuangxi University of Science and TechnologyLiuzhou 545006China Central Iron&Steel Research Institute Beijing 100081China

Precipitation strengthening has been widely adopted in austenitic low-density steel owing to excellent hardened *** approach generally employs the coherentκ′carbides and non-coherent B2 *** the precipitation transformation pathway is decisive for further optimizing the microstructures under specific engineering ***,the detailed precipitation sequence of Fe-28Mn-11Al-1C-5ni(wt%)austenitic low-density steel as well as its influence on mechanical prop-erties during aging process is systematically *** results reveal that nano-sizedκ′carbides domains(2 nm)exist in the solution-treated *** aging at 500℃for 1 h,the cuboidalκ′carbides(15-20 nm)uniformly disperse in austenite ***,after aging at 700℃for 15 min,the coarsenκ′carbides(30-35 nm)inhomogeneously distribute and align preferentially along the〈100〉***,extending the aging time to 60 min,the needle-type B2 particles replace theκ′carbides due to the enrichment of ni elements at the phase boundaries among the austenite andκ′*** aging at 900℃,κ′carbides entirely dissolve into the austenite matrix,and the intragranular B2 particles are the sole precipitates in the austenite matrix and follow the K-S orientation relationship with *** work hardening capability seriously deteriorates due to the shearing ofκ′carbides by gliding *** the intragranular B2 particles preserve excellent work hardening rate by dislocations bow-out *** present work is meaningful for guiding the design of new generation dual-nano precipitation austenitic lightweight steel.

关键词： Lightweight steel κ′-carbides B2 particles Work hardening capability

Forecasting measured responses of structures using temporal deep learning and dual attention

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2024年第6期18卷 832-850页

作者： Viet-Hung dAnG Trong-Phu nGUYEn Thi-Lien PHAM Huan x.nGUYEn department of Structural Mechanics Hanoi University of Civil EngineeringHanoi 11600Vietnam Faculty of Applied Science University of Economics-Technology for IndustriesHanoi 11600Vietnam London digital Twin Research Centre Faculty of Science and TechnologyMiddlesex UniversityLondon NW44BTUK International School Vietnam National UniversityHanoi 11600Vietnam

The objective of this study is to develop a novel and efficient model for forecasting the nonlinear behavior of structures in response to time-varying random *** key idea is to design a deep learning architecture to leverage the relationships,between external excitations and structure's vibration signals,and between historical values and future values,within multiple time-series *** proposed method consists of two main steps:the first step applies a global attention mechanism to combine multiple-measured time series and time-varying excitation into a weighted time series before feeding it to a temporal architecture;the second step utilizes a self-attention mechanism followed by a fully connected layer to predict multi-step future *** viability of the proposed method is demonstrated via two case studies involving synthetic data from a three-dimensional(3d)reinforced concrete structure and experimental data from an 18-story steel ***,comparison and robustness studies are carried out,showing that the proposed method outperforms conventional methods and maintains high performance in the presence of noise with an amplitude of less than 10%.

关键词： structural dynamic time-varying excitation deep learning signal processing response forecasting

Progress on the antiferromagnetic topological insulator MnBi2Te4

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

national Science Review 2024年第2期11卷 33-49页

作者： Shuai Li Tianyu Liu Chang Liu Yayu Wang Hai-Zhou Lu x.C.xie department of Physics Harbin Institute of Technology Shenzhen Institute for Quantum Science and Engineering and department of Physics Southern University of Science and Technology(SUSTech) Quantum Science Center of Guangdong-Hong Kong-Macao Greater Bay Area(Guangdong) Shenzhen Key Laboratory of Quantum Science and Engineering International Quantum Academy Beijing Academy of Quantum Information Sciences Beijing Key Laboratory of Optoelectronic Functional Materials&Micro-nano devices Department of Physics Renmin University of China State Key Laboratory of Low dimensional Quantum Physics Department of PhysicsTsinghua University Frontier Science Center for Quantum Information Hefei national Laboratory International Center for Quantum Materials School of Physics Peking University Institute for nanoelectronic devices and Quantum Computing Fudan University

Topological materials, which feature robust surface and/or edge states, have now been a research focus in condensed maTher physics. They represent a new class of materials exhibiting nontrivial topological phases,and provide a platform for exploring exotic transport phenomena, such as the quantum anomalous Hall effect and the quantum spin Hall effect. Recently, magnetic topological materials have attracted considerable interests due to the possibility to study the interplay between topological and magnetic *** particular, the quantum anomalous Hall and axion insulator phases can be realized in topological insulators with magnetic order. MnBi2Te4, as the first intrinsic antiferromagnetic topological insulator discovered, allows the examination of existing theoretical predictions; it has been extensively studied, and many new discoveries have been made. Here we review the progress made on MnBi2Te4from both experimental and theoretical aspects. The bulk crystal and magnetic structures are surveyed first, followed by a review of theoretical calculations and experimental probes on the band structure and surface states, and a discussion of various exotic phases that can be realized in MnBi2Te4. The properties of MnBi2Te4thin films and the corresponding transport studies are then reviewed, with an emphasis on the edge state transport. Possible future research directions in this field are also discussed.

关键词： MnBi2Te4 magnetic topological insulator antiferromagnetic quantum anomalous Hall effect axion insulator

Interfacial stress engineering toward enhancement of ferroelectricity in Al doped HfO_(2)thin films

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第9期33卷 637-643页

作者： S x Chen M M Chen Y Liu d W Cao G J Chen department of Microelectronics Jiangsu UniversityZhenjiang 212013China department of Physics Jiangsu UniversityZhenjiang 212013China Guangdong–Hong Kong–Macao Joint Laboratory for Intelligent Micro-nano Optoelectronic Technology Foshan UniversityFoshan 528225China

Ferroelectric HfO_(2)has attracted much attention owing to its superior ferroelectricity at an ultra-thin thickness and good compatibility with Si-based complementary metal-oxide-semiconductor(CMOS)***,the crystallization of polar orthorhombic phase(o-phase)HfO_(2)is less competitive,which greatly limits the ferroelectricity of the as-obtained ferroelectric HfO_(2)thin ***,the crystallization of o-phase HfO_(2)can be thermodynamically modulated via interfacial stress *** this paper,the growth of improved ferroelectric Al doped HfO_(2)(HfO_(2):Al)thin films on(111)-oriented Si substrate has been *** analysis has suggested that nonpolar monoclinic HfO_(2):Al grown on(111)-oriented Si substrate suffered from a strong compressive strain,which promoted the crystallization of(111)-oriented o-phase HfO_(2)in the as-grown HfO_(2):Al thin *** addition,the in-plane lattice of(111)-oriented Si substrate matches well with that of(111)-oriented o-phase HfO_(2),which further thermally stabilizes the o-phase HfO_(2).Accordingly,an improved ferroelectricity with a remnant polarization(2P_(r))of 26.7C/cm^(2) has been *** results shown in this work provide a simple way toward the preparation of improved ferroelectric HfO_(2)thin films.

关键词： improved ferroelectricity interfacial stress engineering compressive strain HfO_(2)

维普期刊数据库