检索结果-南通市图书馆

journal of Environmental Sciences 2012年第9期24卷 1559-1568页

作者： x.j.lee L.Y.lee L.P.Y.Foo D.G.Hassell Department of Chemical and Environmental Engineering University of Nottingham Malaysia CampusJalan Broga43500 SemenyihSelangor Darul EhsanMalaysia.

The present work covers the preparation of carbon-based nanosorbents by ethylene decomposition on stainless steel mesh without the use of external catalyst for the treatment of water containing nickel ions （Ni2＋）. The reaction temperature was varied from 650 to 850℃, while reaction time and ethylene to nitrogen flow ratio were maintained at 30 rain and 1：1 cma/min, respectively. Results show that nanosorbents synthesised at a reaction temperature of 650℃ had the smallest average diameter （75 nm）, largest BET surface area （68.95 m2/g） and least amount of impurity （0.98 wt.% Fe）. A series of batch sorption tests were performed to evaluate the effects of initial pH, initial metal concentration and contact time on Ni2~ removal by the nanosorbents. The equilibrium data fitted well to Freundlich isotherm. The kinetic data were best correlated to a pseudo second-order model indicating that the process was of chemisorption type. Further analysis by the Boyd kinetic model revealed that boundary layer diffusion was the controlling step. This primary study suggests that the prepared material with Freundiich constants compared well with those in the literature, is a promising sorbent for the sequestration of Ni2＋ in aqueous solutions.

关键词： adsorption nanosorbent nickel ions isotherms kinetics

Generalized polynomial chaos expansion by reanalysis using static condensation based on substructuring

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第5期45卷 819-836页

作者： D.lee S.CHANG j.lee Department of Automotive Engineering Hanyang UniversitySeoul 04763Republic of Korea School of Mechanical Engineering Chungnam National UniversityDaejeon 34134Republic of Korea Department of Mechanical Robotics and Energy EngineeringDongguk UniversitySeoul 04620Republic of Korea

This paper presents a new computational method for forward uncertainty quantification(UQ)analyses on large-scale structural systems in the presence of arbitrary and dependent random *** method consists of a generalized polynomial chaos expansion(GPCE)for statistical moment and reliability analyses associated with the stochastic output and a static reanalysis method to generate the input-output data *** the reanalysis,we employ substructuring for a structure to isolate its local regions that vary due to random *** allows for avoiding repeated computations of invariant substructures while generating the input-output data *** substructuring with static condensation further improves the computational efficiency of the reanalysis without losing ***,the GPCE with the static reanalysis method can achieve significant computational saving,thus mitigating the curse of dimensionality to some degree for UQ under high-dimensional *** numerical results obtained from a simple structure indicate that the proposed method for UQ produces accurate solutions more efficiently than the GPCE using full finite element analyses(FEAs).We also demonstrate the efficiency and scalability of the proposed method by executing UQ for a large-scale wing-box structure under ten-dimensional(all-dependent)random inputs.

关键词： forward uncertainty quantification(UQ) generalized polynomial chaos expansion(GPCE) static reanalysis method static condensation substructuring

Mathematical modeling and simulations of stress mitigation by coating polycrystalline particles in lithium-ion batteries

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics and Mechanics(English Edition) 2024年第6期45卷 947-962页

作者： N.IQBAL j.CHOI S.F.SHAH C.lee S.lee Department of Mechanical Roboticsand Energy EngineeringDongguk University-SeoulSeoul 04620Republic of Korea

A chemo-mechanical model is developed to investigate the effects on the stress development of the coating of polycrystalline Ni-rich LiNixMnyCo_(z)O_(2)(x≥0.8)(NMC)particles with poly(3,4-ethylenedioxythiophene)(PEDOT).The simulation results show that the coating of primary NMC particles significantly reduces the stress generation by efficiently accommodating the volume change associated with the lithium diffusion,and the coating layer plays roles both as a cushion against the volume change and a channel for the lithium transport,promoting the lithium distribution across the secondary particles more ***,the lower stiffness,higher ionic conductivity,and larger thickness of the coating layer improve the stress *** paper provides a mathematical framework for calculating the chemo-mechanical responses of anisotropic electrode materials and fundamental insights into how the coating of NMC active particles mitigates stress levels.

关键词： lithium-ion battery(LIB) polycrystalline particle coating finite element simulation Ni-rich LiNixMnyCo_(z)O_(2)(x>0.8)(NMC)

Resistive field generation in intense proton beam interaction with solid targets

在线全文

学校读者我要写书评

暂无评论

Matter and Radiation at Extremes 2024年第1期9卷 35-43页

作者： W.Q.Wang j.j.Honrubia Y.Yin x.H.Yang F.Q.Shao Department of Physics National University of Defense TechnologyHunanChina ETSI Aeronáutica y del Espacio Universidad Politécnica de MadridMadridSpain Department of Nuclear Science and Technology National University of Defense TechnologyHunanChina

The Brown-Preston-Singleton(BPS)stopping power model is added to our previously developed hybrid code to model ion beam-plasma *** simulations show that both resistive field and ion scattering effects are important for proton beam transport in a solid target,in which they compete with each *** the target is not completely ionized,the self-generated resistive field effect dominates over the ion scattering ***,when the target is completely ionized,this situation is ***,it is found that Ohmic heating is important for higher current densities and materials with high *** energy fraction deposited as Ohmic heating can be as high as 20%-30%.Typical ion divergences with half-angles of about 5°-10°will modify the proton energy deposition substantially and should be taken into account.

关键词： interaction beam intense

Compressive property and energy absorption characteristic of interconnected porous Mg-Zn-Y alloys with adjusting Y addition

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Magnesium and Alloys 2024年第1期12卷 171-185页

作者： j.A.Liu S.j.Liu B.Wang W.B.Sun x.j.Liu Z.W.Han College of Materials Science and Engineering Key Laboratory of Automobile Materials(Ministry of Education)Jilin UniversityChangchun 130022PR China Key Laboratory of Bionic Engineering(Ministry of Education) College of Biological and Agricultural EngineeringJilin UniversityChangchun130022PR China Weihai Institute for Bionics-jilin University Weihai 264205PR China

In this study,interconnected porous Mg-2Zn-xY alloys with different phase compositions were prepared by various Y additions(x=0.4,3,and 6 wt.%)to adjust the compressive properties and energy absorption *** characterization methods were then applied to identify the microstructure of the porous Mg-Zn-Y and describe the details of the second *** tests were performed at room temperature(RT),200℃,and 300℃to study the impact of the Y addition and testing temperature on the compressive properties of the porous *** experimental results showed that a high Y content promotes a microstructure refinement and increases the volume fraction of the second *** the Y content increases,different Mg-Zn-Y ternary phases appear:I-phase(Mg_(3)Zn_(6)Y),W-phase(Mg_(3)Zn_(3)Y_(2)),and LPSO phase(Mg_(12)ZnY).When the Y content ranges between 0.4%and 6%,the compressive strength increases from 6.30MPa to 9.23 MPa,and the energy absorption capacity increases from 7.33 Mj/m^(3)to 10.97 Mj/m^(3)at RT,which is mainly attributed to the phase composition and volume fraction of the second ***,the average energy absorption efficiency is independent of the Y *** addition,the compressive deformation behaviors of the porous Mg-Zn-Y are altered by the testing *** compressive strength and energy absorption capacity of the porous Mg-Zn-Y decrease due to the softening effect of the high temperature on the *** deformation behaviors at different temperatures are finally observed to reflect the failure mechanisms of the struts.

关键词： Porous magnesium Rare earth elements Microstructure Compressive behavior Energy absorption characteristic

Superplasticity of fine-grained Mg-10Li alloy prepared by severe plastic deformation and understanding its deformation mechanisms

在线全文

学校读者我要写书评

暂无评论

journal of Magnesium and Alloys 2024年第1期12卷 316-331页

作者： H.T.jeong S.W.lee W.j.Kim Department of Materials Science and Engineering Hongik UniversityMapo-guSangsu-dong 72-1Seoul 121-791Republic of Korea

The superplastic behavior and associated deformation mechanisms of a fine-grained Mg-10.1 Li-0.8Al-0.6Zn alloy(LAZ1011)with a grain size of 3.2μm,primarily composed of the BCCβphase and a small amount of the HCPαphase,were examined in a temperature range of 473 K to 623 *** microstructural refinement of this alloy was achieved by employing high-ratio differential speed *** best superplasticity was achieved at 523 K and at strain rates of 10^(-4)-5×10^(-4)s^(-1),where tensile elongations of 550±600%were *** the heating and holding stage of the tensile samples prior to tensile loading,a significant increase in grain size was observed at temperatures above 573 ***,it was important to consider this effect when analyzing and understanding the superplastic deformation behavior and *** the investigated strain rate range,the superplastic flow at low strain rates was governed by lattice diffusion-controlled grain boundary sliding,while at high strain rates,lattice diffusion-controlled dislocation climb creep was the rate-controlling deformation *** was concluded that solute drag creep is unlikely to *** the late stages of deformation at 523 K,it was observed that grain boundary sliding led to the agglomeration of theαphase,resulting in significant strain *** mechanism maps were constructed forβ-Mg-Li alloys in the form of 2D and 3D formats as a function of strain rate,stress,temperature,and grain size,using the constitutive equations for various deformation mechanisms derived based on the data of the current tests.

关键词： Magnesium-lithium alloy Superplasticity Severe plastic deformation Grain size Grain growth

Four Late-type Galaxies with Double Radio Lobes and Properties of Such Galaxies

在线全文

学校读者我要写书评

暂无评论

Research in Astronomy and Astrophysics 2024年第4期24卷 84-90页

作者： Z.S.Yuan x.Y.Gao Z.L.Wen j.L.Han National Astronomical Observatories Chinese Academy of SciencesBeijing 100101China CAS Key Laboratory of FAST National Astronomical ObservatoriesChinese Academy of SciencesBeijing 100101China School of Astronomy and Space Sciences University of Chinese Academy of SciencesBeijing 100049China

The triggering mechanism for radio lobes from late-type galaxies is not fully *** samples are desired for a thorough investigation and *** utilizing the optical data from the newly released Dark Energy Spectroscopic Instrument imaging surveys and the radio sources from the NRAO VLA Sky Survey and the Faint Images of the Radio Sky at Twenty-centimeter,we identify four Late-type Galaxies with double Radio Lobes(La GRLs):j0217-3645,j0947+6220,j1412+3723 and j1736+*** previously known La GRLs,we confirm the correlation between radio power P_(1.4GHz)and stellar mass M_(*)of host ***(25/35)La GRLs belong to the blue cloud galaxies,while the newly identified cases in this work are located within the region of the red *** find a clear correlation between the differential radio power,i.e.,the offset from the P_(1.4GHz)-M_(*)relation,and the galaxy color,indicating that bluer galaxies at a fixed M_(*)tend to host more powerful radio ***,the majority(31/36)of La GRLs are either located in a galaxy group or displaying a disturbed *** suggest that all of the galaxy mass,color and surrounding environment could play important roles in triggering radio lobes in late-type galaxies.

关键词： galaxies:active galaxies:jets galaxies:spiral radio continuum:galaxies

Greatly enhanced corrosion/wear resistances of epoxy coating for Mg alloy through a synergistic effect between functionalized graphene and insulated blocking layer

在线全文

学校读者我要写书评

暂无评论

journal of Magnesium and Alloys 2024年第1期12卷 332-344页

作者： Z.Y.xue x.j.Li j.H.Chu M.M.Li D.N.Zou L.B.Tong School of Metallurgical Engineering Xi’an University of Architecture and TechnologyXi’an 710055China State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body Hunan UniversityChangsha 410082China

The poor corrosion and wear resistances of Mg alloys seriously limit their potential applications in various *** conventional epoxy coating easily forms many intrinsic defects during the solidification process,which cannot provide sufficient *** the current study,we design a double-layer epoxy composite coating on Mg alloy with enhanced anti-corrosion/wear properties,via the spin-assisted assembly *** outer layer is functionalized graphene(FG)in waterborne epoxy resin(WEP)and the inner layer is Ce-based conversion(Ce)*** FG sheets can be homogeneously dispersed within the epoxy matrix to fill the intrinsic defects and improve the barrier *** Ce film connects the outer layer with the substrate,showing the transition *** corrosion rate of Ce/WEP/FG composite coating is 2131 times lower than that of bare Mg alloy,and the wear rate is decreased by~90%.The improved corrosion resistance is attributed to the labyrinth effect(hindering the penetration of corrosive medium)and the obstruction of galvanic coupling *** synergistic effect derived from the FG sheet and blocking layer exhibits great potential in realizing the improvement of multi-functional integration,which will open up a new avenue for the development of novel composite protection coatings of Mg alloys.

关键词： Mg alloy Functionalized graphene Epoxy coating Corrosion/wear resistance Blocking layer

Cavity-agnostic acoustofluidic manipulations enabled by guided flexural waves on a membrane acoustic waveguide actuator

在线全文

学校读者我要写书评

暂无评论

Microsystems & Nanoengineering 2024年第2期10卷 153-171页

作者： Philippe Vachon Srinivas Merugu jaibir Sharma Amit Lal Eldwin j.Ng Yul Koh joshua E.-Y.lee Chengkuo lee Department of Electrical and Computer Engineering National University of SingaporeSingaporeSingapore Institute of Microelectronics Agency for ScienceTechnology and Research(A*STAR)SingaporeSingapore SonicMEMS Laboratory School of Electrical and Computer EngineeringCornell UniversityIthacaNYUSA School of Electrical and Data Engineering University of Technology SydneyUltimoNSWAustralia

This article presents an in-depth exploration of the acoustofluidic capabilities of guided flexural waves(GFWs)generated by a membrane acoustic waveguide actuator(MAWA).By harnessing the potential of GFWs,cavity-agnostic advanced particle manipulation functions are achieved,unlocking new avenues for microfluidic systems and lab-on-a-chip *** localized acoustofluidic effects of GFWs arising from the evanescent nature of the acoustic fields they induce inside a liquid medium are numerically investigated to highlight their unique and promising *** traditional acoustofluidic technologies,the GFWs propagating on the MAWA’s membrane waveguide allow for cavity-agnostic particle manipulation,irrespective of the resonant properties of the fluidic ***,the acoustofluidic functions enabled by the device depend on the flexural mode populating the active region of the membrane *** demonstrations using two types of particles include in-sessile-droplet particle transport,mixing,and spatial separation based on particle diameter,along with streaming-induced counter-flow virtual channel generation in microfluidic PDMS *** experiments emphasize the versatility and potential applications of the MAWA as a microfluidic platform targeted at lab-on-a-chip development and showcase the MAWA’s compatibility with existing microfluidic systems.

关键词： waveguide fluid cavity

Generation of brain vascular heterogeneity:recent advances from the perspective of angiogenesis

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Neural Regeneration Research 2025年第7期20卷 2013-2014页

作者： Nathanael j.lee Ryota L.Matsuoka Department of Neurosciences Lerner Research InstituteCleveland ClinicClevelandOHUSA Department of Molecular Medicine Cleveland Clinic Lerner College of MedicineCase Western Reserve UniversityClevelandOHUSA

Heterogeneous proper t i es of vascular endothelial cells in the brain:The brain displays large energy dynamics and consumption,and this high level of metabolic demands is fulfilled by a continuous supply of glucose and oxygen through its vascular *** vasculature consists of highly divergent blood vessel branches,giving rise to a dense network of capillaries that supply blood to all cells across the *** elaborated vascular network is thought to develop via angiogenesis,a process in which new blood vessels grow from pre-existing *** capillaries exhibit organotypic features distinct from other tissues and are formed primarily by two major endothelial cell(EC)types:those that form the semi-permeable blood-brain barrier(BBB)and those that develop highly permeable pores known as fenestrae(Matsuoka et al.,2022).The structural and functional differences between BBB and fenestrated vascular ECs represent a fundamental feature of brain vasculature and form the foundation for both brain function and homeostasis.

关键词： angiogenesis homeostasis network