检索结果-南通市图书馆

Interface property of dissimilar Ti-6Al-4V/AA1050 composite laminate made by non-equal channel lateral co-extrusion and heat treatment

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第3期33卷 197-208页

作者： juan Liao Mengmeng Tian xin xue School of Mechanical Engineering and Automation Fuzhou UniversityFuzhou 350116China

The purpose of this paper is to examine the effect of processing parameters and subsequent heat treatments on the microstructures and bonding strengths of Ti-6Al-4V/AA1050 laminations formed via a non-equal channel lateral co-extrusion *** microstructural evolution and growth mechanism in the diffusion layer were discussed further to optimize the bonding quality by appropriately adjusting process *** electron microscopes(SEM),energy dispersive spectrometer(EDS),and x-ray diffraction(xRD)were used to characterize interfacial diffusion *** shear test was used to determine the mechanical properties of the interfacial diffusion *** experimental results indicate that it is possible to co-extrusion Ti-6Al-4V/AA1050 compound profiles using non-equal channel lateral *** heat treatment processes affect the thickness of the diffusion *** the temperature and time of heat treatment increase,the thickness of the reaction layers increases ***,the shear strength of the Ti-6Al-4V/AA1050 composite interface is proportional to the diffusion layer *** is observed that a medium interface thickness results in superior mechanical performance when compared to neither a greater nor a lesser interface *** characterization of all heat treatments reveals that the only intermetallic compound observed in the diffusion layers is TiAl_(3).Due to the inter-diffusion of Ti and Al atoms,the TiAl_(3) layer grows primarily at AA1050/TiAl_(3) interfaces.

关键词： Shear strength Co-extrusion Heat treatment Microstructure Intermetallic compounds

Thermodynamic property of sandwich cylindrical shell structure with metallic wire mesh:Numerical modeling and experimental analysis

在线全文

学校读者我要写书评

暂无评论

Chinese journal of Aeronautics 2024年第1期37卷 138-152页

作者： xin xUE Guojian SHEN juan LIAO Institute of Metal Rubber&Vibration Noise School of Mechanical Engineering and AutomationFuzhou UniversityFuzhou 350116China Fujian Shuikou Power Generation Group Co. LTDFuzhou 350000China

As a new addition to lightweight composite structures,the sandwich cylindrical shell with a metallic wire mesh core has emerged as a promising solution for thermodynamic performance analysis at elevated *** intricate interwoven cellular formations within the metallic wire mesh pose difficulties for thermo-mechanical modeling and property ***,the constitutive models employed to characterize hysteresis phenomena were presented,comprising isotropic elasticity,Bergstrom-Boyce model,Ogden hyper-elasticity,and parameter identification through mechanical examinations at varying ***,the finite element modeling of cylindrical shell structures was determined for modal and steady-state dynamic ***,the experimental procedures were carried out,including the preparation of the sandwich cylindrical shell and the dynamic testing *** first-order natural frequency of the cylindrical shell structure is close to the resonance frequency of the dynamic test results,with a maximum error of 6.5%,demonstrating the accuracy of the simulation *** compared to the solid-core cylindrical shell,the average insertion loss of the sandwich cylindrical shell structure within the frequency range of 10–1000 Hz at room temperature is up to 11.09 ***,at elevated temperatures,the average insertion loss of the sandwich cylindrical shell decreases but fluctuates as the temperature changes.

关键词： Energy dissipation Metallic matrix composites Numerical analysis Sandwich structure Thermodynamic properties

Elastoplastic Large Deformation Using Meshless Integral Method

在线全文

学校读者我要写书评

暂无评论

World journal of Mechanics 2012年第6期2卷 339-360页

作者： jianfeng Ma x. j. xin Department of Aerospace and Mechanical Engineering Saint Louis University Saint Louis USA Department of Mechanical and Nuclear Engineering Kansas State University Manhattan USA

In this paper, the meshless integral method based on the regularized boundary integral equation [1] has been extended to analyze the large deformation of elastoplastic materials. The updated Lagrangian governing integral equation is obtained from the weak form of elastoplasticity based on Green-Naghdi’s theory over a local sub-domain, and the moving least-squares approximation is used for meshless function approximation. Green-Naghdi’s theory starts with the additive decomposition of the Green-Lagrange strain into elastic and plastic parts and considers aj2elastoplastic constitutive law that relates the Green-Lagrange strain to the second Piola-Kirchhoff stress. A simple, generalized collocation method is proposed to enforce essential boundary conditions straightforwardly and accurately, while natural boundary conditions are incorporated in the system governing equations and require no special handling. The solution algorithm for large deformation analysis is discussed in detail. Numerical examples show that meshless integral method with large deformation is accurate and robust.

关键词： Meshless Method Large Deformation Local Boundary Integral Equation Moving Least-Squares Approximation Subtraction Method Singularity Removal Elastoplasticity Green-Naghdi’s Theory

Effect of tungsten carbide particles on microstructure and mechanical properties of Cu alloy composite bit matrix

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Iron and Steel Research(International) 2024年第2期31卷 519-530页

作者： Ding-qian Dong Feng-yuan He xin-hui Chen Hui Li Kai-hua Shi Hui-wen xiong xin xiang Li Zhang College of Mechanical Engineering Sichuan University of Science and EngineeringZigong643000SichuanChina State Key Laboratory of Powder Metallurgy Central South UniversityChangsha410083HunanChina Zigong Cemented Carbide Co. Ltd.Zigong643011SichuanChina Material Corrosion and Protection Key Laboratory of Sichuan Province Sichuan University of Science and EngineeringZigong643000SichuanChina

Copper alloy composite bit matrix was prepared by pressureless vacuum infiltration,using at least one of the three kinds of tungsten carbide particles,for example,irregular cast tungsten carbide,monocrystalline tungsten carbide and sintered reduced tungsten carbide *** effects of powder particle morphology,particle size and mass fraction of tungsten carbide on the microstructure and mechanical properties of copper alloy composite were investigated by means of scanning electron microscopy,x-ray diffraction and abrasive wear test in *** results show that tungsten carbide morphology and particle size have obvious effects on the mechanical properties of copper alloy *** tungsten carbide partially dissolved in the copper alloy binding phase,and layers of Cu_(0.3)W_(0.5)Ni_(0.1)Mn_(0.1)C phase with a thickness of around 8–15μm were formed on the edge of the cast tungsten *** 45%irregular crushed fine cast tungsten carbide and 15%monocrystalline cast tungsten carbide were used as the skeleton,satisfactory comprehensive performance of the reinforced copper alloy composite bit matrix was obtained,with the bending strength,impact toughness and hardness reaching 1048 MPa,4.95 j/cm^(2) and 43.6 HRC,*** main wear mechanism was that the tungsten carbide particles firstly protruded from the friction surface after the copper alloy matrix was worn,and then peeled off from the matrix when further wear occurred.

关键词： Polycrystalline diamond compact Pressureless vacuum infiltration Copper alloy composite bit matrix Microstructure characterization Abrasive wear behavior

Impact response and energy absorption of metallic buffer with entangled wire mesh damper

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第5期35卷 137-150页

作者： Chao Zheng jun Wu Mangong Zhang xin xue Institute of Metal Rubber&Vibration Noise School of Mechanical Engineering and AutomationFuzhou UniversityFuzhou 350116China Wuhan Second Ship Design and Research Institute Wuhan 430205China

An innovative metallic buffer consisting of series-connected hat-shaped entangled wire mesh damper(EWMD)and parallel springs are proposed in this work to enhance the reliability of engineering *** impact response and the energy dissipation mechanism of hat-shaped EWMD under different quasi-static compression deformations(2-7 mm)and impact heights(100-200 mm)are investigated using experimental and numerical *** results demonstrate distinct stages in the quasi-static mechanical characteristics of hat-shaped EWMD,including stiffness softening,negative stiffness,and stiffness *** loss factor gradually increases with increasing compression deformation before entering the stiffness hardening *** impact loads,the hat-shaped EWMD exhibits optimal impact energy absorption when it enters the negative stiffness stage(150 mm),resulting in the best impact isolation effect of metallic ***,the impact energy absorption significantly decreases when hat-shaped EWMD enters the stiffness hardening ***,quasi-static compression analysis after experiencing different impact loads reveals the disappearance of the negative stiffness ***,with increasing impact loads,the stiffness hardening point progressively shifts to an earlier stage.

关键词： Metallic buffer Hat-shaped EWMD Drop impact Energy absorption characteristics Mechanical behavior

A ratiometric fluorescent probe for hypoxanthine detection in aquatic products based on the enzyme mimics and fluorescence of cobalt-doped carbon nitride

在线全文

学校读者我要写书评

暂无评论

Food Science and Human Wellness 2024年第2期13卷 879-884页

作者： xin Wang Chengyi Hong Zhengzhong Lin Zhiyong Huang College of Ocean Food and Biological Engineering Jimei UniversityXiamen 361021China

A ratiometric fluorescent probe for hypoxanthine(Hx)detection was established based on the mimic enzyme and fluorescence characteristics of cobalt-doped graphite-phase carbon nitride(Co doped g-C_(3)N_(4)).In addition to emitting strong fluorescence,the peroxidase activity of Co doped g-C_(3)N_(4)can catalyze the reaction of O-phenylenediamine and H_(2)O_(2)to produce diallyl phthalate which can emit yellow fluorescence at 570 *** the decomposition of Hx by xanthine oxidase,Hx can be indirectly detected by the generating hydrogen peroxide based on the measurement of fluorescent ratio I(F_(570)/F_(370)).The linear range was 1.7-272.2 mg/kg(R^(2)=0.997),and the detection limit was 1.52 mg/kg(3σ/K,n=9).The established method was applied to Hx detection in bass,grass carp,and shrimp,and the data were verified by *** result shows that the established probe is sensitive,accurate,and reliable,and can be used for Hx detection in aquatic products.

关键词： Co doped g-C_(3)N_(4) Ratiometric fluorescent probe Hypoxanthine Freshness Aquatic products

A Novel Tensor Decomposition-Based Efficient Detector for Low-Altitude Aerial Objects With Knowledge Distillation Scheme

在线全文

学校读者我要写书评

暂无评论

IEEE/CAA journal of Automatica Sinica 2024年第2期11卷 487-501页

作者： Nianyin Zeng xinyu Li Peishu Wu Han Li xin Luo Department of Instrumental and Electrical Engineering Xiamen UniversityXiamen 361005China IEEE College of Computer and Information Science Southwest UniversityChongqing 400715China

Unmanned aerial vehicles(UAVs) have gained significant attention in practical applications, especially the low-altitude aerial(LAA) object detection imposes stringent requirements on recognition accuracy and computational resources. In this paper, the LAA images-oriented tensor decomposition and knowledge distillation-based network(TDKD-Net) is proposed,where the TT-format TD(tensor decomposition) and equalweighted response-based KD(knowledge distillation) methods are designed to minimize redundant parameters while ensuring comparable performance. Moreover, some robust network structures are developed, including the small object detection head and the dual-domain attention mechanism, which enable the model to leverage the learned knowledge from small-scale targets and selectively focus on salient features. Considering the imbalance of bounding box regression samples and the inaccuracy of regression geometric factors, the focal and efficient IoU(intersection of union) loss with optimal transport assignment(F-EIoU-OTA)mechanism is proposed to improve the detection accuracy. The proposed TDKD-Net is comprehensively evaluated through extensive experiments, and the results have demonstrated the effectiveness and superiority of the developed methods in comparison to other advanced detection algorithms, which also present high generalization and strong robustness. As a resource-efficient precise network, the complex detection of small and occluded LAA objects is also well addressed by TDKD-Net, which provides useful insights on handling imbalanced issues and realizing domain adaptation.

关键词： Attention mechanism knowledge distillation(KD) object detection tensor decomposition(TD) unmanned aerial vehicles(UAVs)

Mechanical property of cylindrical sandwich shell with gradient core of entangled wire mesh

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第1期31卷 510-522页

作者： xin xue Chao Zheng Fu-qiang Lai xue-qian Wu Institute of Metal-rubber&Vibration Noise School of Mechanical Engineering and AutomationFuzhou UniversityFuzhou350116China Fujian Metallurgical Industry Design Institute Fuzhou350116China

To explore the wide-frequency damping and vibration-attenuation performances in the application of aerospace components,the cylindrical sandwich shell structure with a gradient core of entangled wire mesh was proposed in this ***,the gradient cores of entangled wire mesh in the axial and radial directions were prepared by using an in-house Numerical Control weaving machine,and the metallurgical connection between skin sheets and the gradient core was performed using vacuum ***,to investigate the mechanical properties of cylindrical sandwich shells with axial or radial gradient cores,quasi-static and dynamic mechanical experiments were carried *** primary evaluations of mechanical properties include secant stiffness,natural frequency,Specific Energy Absorption(SEA),vibration acceleration level,and so *** results suggest that the vibration-attenuation performance of the sandwich shell is remarkable when the high-density core layer is at the end of the shell or abuts the inner *** axial gradient material has almost no influence on the vibration frequencies of the shell,whereas the vibration frequencies increase dramatically when the high-density core layer approaches the ***,compared to the conventional sandwich shells,the proposed functional grading cylindrical sandwich shell exhibits more potential in mass reduction,stiffness designing,and energy dissipation.

关键词： Entangled wire mesh Gradient cylindrical sandwich shell Vacuum brazing Secant stiffness Damping

Exceptional mechanical performance and macroscale superlubricity enabled by core-shell-like MoS_(2)/B_(4)C film

在线全文

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第7期67卷 2018-2030页

作者： REN SiMing GAO ZhenRong FAN xin WANG Haixin WANG LiPing Key Laboratory of Advanced Marine Materials Ningbo Institute of Materials Technology and EngineeringChinese Academy of SciencesNingbo 315201China

Molybdenum disulfide(MoS_(2)) films are widely deployed in industrial applications owing to their inherent interlayer slip characteristics, offering energy consumption savings and prolonged mechanical part performance. Nevertheless, their practical utility is limited by environmental constraints and the limitations of preparation techniques, which hinder the attainment of robust superlubricity(friction coefficient xtensive micro-sized asperities;(2) a nanolayer of amorphous carbon enriched with oxide nanoparticles is formed on the uppermost part of these asperities;(3) numerous incommensurate nanocontacts comprising nanoparticles and highly oriented MoS_(2)nanosheets are established, culminating in the achievement of robust superlubricity. Our pioneering design, coupled with the elucidation of the underlying superlubricity mechanism, holds significant promise for advancing the development of robust and high-performance lubricants.

关键词： MoS_(2)/B_(4)C nanocomposites core-shell-like structure H/E ratio high-temperature friction macroscale superlubricity