检索结果-南通市图书馆

Chinese Physics B 2019年第5期28卷 288-292页

作者： Y Peng S Yu G Q Zhao W M Li J F Zhao L P Cao x C Wang Q Q Liu S J Zhang R Z Yu Z Deng x h zhu C Q Jin College of Materials Science & Engineering Sichuan University Beijing National Laboratory for Condensed Matter Physics and Institute of Physics Chinese Academy of Sciences School of Physics University of Chinese Academy of Sciences Collaborative Innovation Center of Quantum Matter

Chemical pressure induced by iso-valent doping has been widely employed to tune physical properties of materials. In this work, we report effects of chemical pressure by substitution of Sb or P into As on a recently discovered diluted magnetic semiconductor(Ba,K)(Zn,Mn)_2 As_2, which has the record of reliable Curie temperature of 230 K due to independent charge and spin doping. Sb and P are substituted into As-site to produce negative and positive chemical pressures, respectively.x-ray diffraction results demonstrate the successful chemical solution of dopants. Magnetic properties of both K-underdoped and K-optimal-doped samples are effectively tuned by Sb-and P-doping. The hall effect measurements do not show decrease in carrier concentrations upon Sb-and P-doping. Impressively, magnetoresistance is significantly improved from7% to 27% by only 10% P-doping, successfully extending potential application of(Ba,K)(Zn,Mn)_2 As_2.

关键词： chemical pressure (Ba,K)(Zn,Mn)2As2 diluted magnetic semiconductor iso-valent doping

维普期刊数据库

Molecule‑Level Multiscale Design of Nonflammable Gel Polymer Electrolyte to Build Stable SEI/CEI for Lithium Metal Battery

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第1期17卷 404-423页

作者： Qiqi Sun Zelong Gong Tao Zhang Jiafeng Li xianli zhu Ruixiao zhu Lingxu Wang Leyuan Ma xuehui Li Miaofa Yuan Zhiwei Zhang Luyuan Zhang Zhao Qian Longwei Yin Rajeev Ahuja Chengxiang Wang Key Laboratory for Liquid‑Solid Structural Evolution and Processing of Materials(Ministry of Education) School of Materials Science and EngineeringShandong UniversityJinan 250061People’s Republic of China Condensed Matter Theory Department of Physics and AstronomyUppsala UniversityUppsala 75120Sweden

The risk of flammability is an unavoidable issue for gel polymer electrolytes(GPEs).Usually,flameretardant solvents are necessary to be used,but most of them would react with anode/cathode easily and cause serious interfacial instability,which is a big challenge for design and application of nonflammable ***,a nonflammable GPE(SGPE)is developed by in situ polymerizing trifluoroethyl methacrylate(TFMA)monomers with flame-retardant triethyl phosphate(TEP)solvents and LiTFSI–LiDFOB dual lithium *** is strongly anchored to PTFMA matrix via polarity interaction between-P=O and-Ch_(2)CF_(3).It reduces free TEP molecules,which obviously mitigates interfacial reactions,and enhances flame-retardant performance of TEP *** TEP molecules are also inhibited in solvation of Li^(+),leading to anion-dominated solvation sheath,which creates inorganic-rich solid electrolyte interface/cathode electrolyte interface *** coordination structure changes Li^(+)transport from sluggish vehicular to fast structural transport,raising ionic conductivity to 1.03 mS cm^(-1) and transfer number to 0.41 at 30℃.The Li|SGPE|Li cell presents highly reversible Li stripping/plating performance for over 1000 h at 0.1 mA cm^(−2),and 4.2 V LiCoO_(2)|SGPE|Li battery delivers high average specific capacity>120 mAh g^(−1) over 200 *** study paves a new way to make nonflammable GPE that is compatible with Li metal anode.

关键词： Anchoring effect Nonflammable gel electrolyte In situ cross-linked Electrode-electrolyte interface Li metal battery

维普期刊数据库

Constructing Donor–Acceptor‑Linked COFs Electrolytes to Regulate Electron Density and Accelerate the Li^(+)Migration in Quasi‑Solid‑State Battery

在线全文

学校读者我要写书评

暂无评论

Nano-Micro Letters 2025年第1期17卷 456-471页

作者： Genfu Zhao hang Ma Conghui Zhang Yongxin Yang Shuyuan Yu haiye zhu Yongjiang Sun hong Guo School of Materials and Energy International Joint Research Center for Advanced Energy Materials of Yunnan ProvinceYunnan UniversityKunming 650091People’s Republic of China Yunnan Yuntianhua Co. LtdR&D CenterKunming 650228People’s Republic of China Southwest United Graduate School Kunming 650091People’s Republic of China

Regulation the electronic density of solid-state electrolyte by donor–acceptor(D–A)system can achieve highly-selective Li^(+)transportation and conduction in solid-state Li metal *** study reports a high-performance solid-state electrolyte thorough D–A-linked covalent organic frameworks(COFs)based on intramolecular charge transfer *** other reported COFbased solid-state electrolyte,the developed concept with D–A-linked COFs not only achieves electronic modulation to promote highly-selective Li^(+)migration and inhibit Li dendrite,but also offers a crucial opportunity to understand the role of electronic density in solid-state Li metal *** introduced strong electronegativity F-based ligand in COF electrolyte results in highlyselective Li^(+)(transference number 0.83),high ionic conductivity(6.7×10^(-4)S cm^(−1)),excellent cyclic ability(1000 h)in Li metal symmetric cell and high-capacity retention in Li/LiFePO_(4)cell(90.8%for 300 cycles at 5C)than substituted C-and N-based *** is ascribed to outstanding D–A interaction between donor porphyrin and acceptor F atoms,which effectively expedites electron transferring from porphyrin to F-based ligand and enhances Li^(+)***,we anticipate that this work creates insight into the strategy for accelerating Li^(+)conduction in high-performance solid-state Li metal batteries through D–A system.

关键词： Electronic modulation engineering Donor-acceptor-linked covalent organic frameworks Quasi-solid-state Li metal battery

维普期刊数据库

Low-cost and fluoride-free synthesis of MFI zeolite nanosheets with enhanced stability for benzene alkylation with ethanol

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2025年第1期100卷 458-468页

作者： Peng zhu Cun Liu Yiren Yu Guoshu Gao Yumeng Zhao xiongfu Zhang Guodong Liu Guohui Yang State Key Laboratory of Fine Chemicals School of Chemical Engineering Dalian University of Technology State Key Laboratory of Catalysis Dalian Institute of Chemical Physics Chinese Academy of Sciences

Zeolite nanosheets with a short b-axis thickness are highly desirable in lots of catalytic reactions due to their reduced diffusion resistance. Nevertheless, conventional synthesis methods usually require expensive structure-directing agents(SDAs), pricey raw materials, and eco-unfriendly fluorine-containing additives. here, we contributed a cost-effective and fluoride-free synthesis method for synthesizing high-quality MFI zeolite nanosheets through a Silicalite-1(Sil-1) seed suspension and urea cooperative strategy, only with inexpensive colloidal silica as the Si source. Our approach was effective for synthesizing both Sil-1 and aluminum-containing ZSM-5 nanosheets. By optimizing key synthesis parameters,including seed aging time, seed quantity, and urea concentration, we achieved precise control over the crystal face aspect ratio and b-axis thickness. We also revealed a non-classical oriented nanosheet growth mechanism, where Sil-1 seeds induced the formation of quasi-ordered precursor particles, and the(010)crystal planes of these particles facilitated urea adsorption, thereby promoting c-axis-oriented *** obtained ZSM-5 nanosheets exhibited exceptional catalytic performance in the benzene alkylation with ethanol, maintaining stability for over 500 h, which is 5 times longer than traditional ZSM-5 catalysts. Furthermore, large-scale production of ZSM-5 nanosheets was successfully carried out in a 3 L highpressure autoclave, yielding samples consistent with those from laboratory-scale synthesis. This work marks a significant step forward in the sustainable and efficient production of MFI nanosheets using inexpensive and environmentally friendly raw materials, offering the broad applicability in catalysis.

关键词： Aspect ratio

Trinuclear gold-catalyzed site-selective alkylation of peptides

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Science China Chemistry 2025年第1期68卷 249-256页

作者： Qing-Yun Fang Chengyihan Gu Yinghan Chen Wencheng Yan Yong Liang Weipeng Li Chengjian zhu Jie han Jin xie State Key Laboratory of Coordination Chemistry Jiangsu Key Laboratory of Advanced Organic Materials Chemistry and Biomedicine Innovation Center (Chem BIC) School of Chemistry and Chemical Engineering Nanjing University Green Catalysis Center College of Chemistry Zhengzhou University State Key Laboratory of Natural Medicines China Pharmaceutical University

Selective modification of peptides has always been a challenging issue. The selective alkylation of peptides can alter the biological activity and physical properties of molecules, and it has gained significant research interest. We herein disclose an intriguing gold-catalyzed alkylation of peptides using bench-stable unactivated alkyl bromides under photoredox catalysis. A wide range of structurally diverse primary, secondary and tertiary alkyl bromides serve as effective coupling partners to precisely connect with the α-C(sp3)–h in glycine residue of peptides. This protocol demonstrates an exceptionally broad scope for alkyl halides and excellent tolerance for a wide range of useful functional groups. A series of relay transformations to construct cyclic peptides, to proceed click reaction and to realize peptide fluorescence labeling further enhance its synthetic practicality. In addition, mechanistic studies and density functional theory(DFT) calculations reveal an inner-sphere and subsequent outersphere single electron transfer(SET) mechanism.

关键词： gold catalysis peptide alkylation C-C coupling radical

同方期刊数据库

Ammonia-induced CuO/13x for h_(2)S removal from simulated blast furnace gas at low temperature

在线全文

学校读者我要写书评

暂无评论

Green Energy & Environment 2025年第1期10卷 139-149页

作者： Erping Cao Yuhua Zheng hao Zhang Jianshan Wang Yuran Li Tingyu zhu Zhan-guo Zhang Guangwen xu Yanbin Cui State Key Laboratory of Mesoscience and Engineering Institute of Process EngineeringChinese Academy of SciencesBeijing100190China State Key Laboratory of Vanadium and Titanium Resources Comprehensive Utilization PanGang Group Research Institute Co.Ltd.Panzhihua Sichuan617000China Shenyang University of Chemical Technology Shenyang110142China University of Chinese Academy of Sciences Beijing 100049China

Blast furnace gas(BFG)is an important by-product energy for the iron and steel industry and has been widely used for heating or electricity ***,the undesirable contaminants in BFG(especially h_(2)S)generate harmful environmental *** desulfurization of BFG is urgent for integrated steel plants due to the stringent ultra-low emission *** with other desulfurization materials,zeolite-based adsorbents represent a viable option with low costs and long service *** this study,an ammonia-induced CuO modified 13x adsorbent(Nh3–CuO/13x)was prepared for h_(2)S removal from simulated BFG at low *** xRD,h_(2)-TPR and TEM analysis proved that smaller CuO particles were formed and the dispersion of Cu on the surface of 13x zeolite was improved via the induction of *** on h_(2)S adsorption performance of the adsorbent was carried out using simulated BFG,and the results showed that Nh3–CuO/13x-3 has better breakthrough sulfur capacity,which was more than twice the sulfur capacity of CuO/*** is proposed that the enhanced desulfurization performance of Nh3–CuO/13x is attributed to an abundant pore of 13x,and combined action of 13x and *** work provided an effective way to improve the sulfur capacity of zeolite-based adsorbents via impregnation method by ammonia induction.

关键词： Blast furnace gas Desulfurization Ammonia-induced CuO 13x zeolite

Gas-Solid Flow,Combustion Characteristics,and Gas Emissions in a 75 t/h CFB Boiler Based on the CPFD Method

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2025年第1期34卷 323-336页

作者： hUANG xiankun BAI Zhang zhu xiaoli WANG Shuoshuo MU Lin GONG Liang College of New Energy China University of Petroleum (East China) Key Laboratory of Ocean Energy Utilization and Energy Conservation of Ministry of Education School of Energy and Power EngineeringDalian University of Technology

A 3D simulation using Computational Particle Fluid Dynamics（CPFD） methods was used to calculate coal combustion in a 75 t/h industrial-scale circulating fluidized bed（CFB） *** characteristics,gas-solid flow characteristics,and gaseous pollutant emissions of CFB boilers from combustion ignition to stable operation were systematically evaluated in this *** show that the temperature distribution is relatively uniform throughout the *** the combustion process unfolds within the boiler,the gas composition curve strikingly portrays the inverse correlation between CO2and *** the combustion reaction progresses,it becomes evident that the concentration of CO2progressively increases,while the concentration of O2concurrently *** inverse relationship underscores the fundamental combustion reaction,where carbon-based fuels react with oxygen to produce carbon dioxide and release ***,a comprehensive analysis has revealed that,from ignition to stable combustion,both nitric oxide（NO） and sulfur dioxide（SO2） emissions exhibit a declining *** reduction in pollutant generation is attributed to the improvement in combustion *** complete combustion leads to lower levels of unburned hydrocarbons,which are prone to NO ***,the sulfur content in the fuel is more efficiently oxidized to sulfur trioxide（SO3） or bound in sulfates,reducing *** steady state in the simulation,the SO2mass flow rate varies significantly with the furnace height,gradually increasing from 0.07 kg·s-1at 4 m at the bottom of the furnace to a peak of 0.078 kg·s-1at 8 m in the center,and then decreasing to 0.06 kg·s-1at 20m at the top of the furnace.

关键词： Sulfur dioxide

A mini review： Shape memory polymers for biomedica applications

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Chemical Science and Engineering 2017年第2期11卷 143-153页

作者： Kaojin Wang Satu Strandman x. x. zhu Departement de Chimie Universite de Montreal Montreal QC H3C 3J7 Canada

Shape memory polymers （SMPs） are smart materials that can change their shape in a pre-defined manner under a stimulus. The shape memory functionality has gained considerable interest for biomedical applications, which require materials that are biocompatible and sometimes biodegradable. There is a need for SMPs that are prepared from renewable sources to be used as substitutes for conventional SMPs. In this paper, advances in SMPs based on synthetic monomers and bio-compounds are discussed. Materials designed for biomedical applica- tions are highlighted.

关键词： shape memory polymer biodegradability biocompatibility biomedical application bile acids

Bifunctional bridging capping layer enables 24.5% efficiency of perovskite solar cells with polymer-based hole transport materials

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Chemistry 2025年第1期68卷 350-359页

作者： Can zhu Yiyang Wang Lei Meng Beibei Qiu Jing Li Shucheng Qin Ke hu xin Jiang Wenbin Lai Minchao Liu Zhe Liu Chenxing Lu Jinyuan Zhang Yongfang Li Beijing National Laboratory for Molecular Sciences CAS Key Laboratory of Organic Solids Institute of Chemistry Chinese Academy of Sciences School of Chemical Science University of Chinese Academy of Sciences Key Laboratory of Solid State Optoelectronic Devices of Zhejiang Province College of Physics and Electronic Information Engineering Zhejiang Normal University Key Laboratory of Photochemical Conversion and Optoelectronic Materials Technical Institute of Physics and ChemistryChinese Academy of Sciences Laboratory of Advanced Optoelectronic Materials College of Chemistry Chemical Engineering and Materials ScienceSoochow University

Developing a bridge capping layer between perovskite and hole transport layer materials（hTMs） in the n-i-p perovskite solar cells（pero-SCs） is an effective approach to modify the morphology of hTMs and passivate the perovskite ***, we select the quinoxaline-based bifunctional passivation agent, quinoxalin-6-yl-methylamine hydrochloride（Qx MACl）,as the bridging layer, and a D-A copolymer PBQ12 containing the same quinoxaline unit as an hTM for the n-i-p pero-SCs. Due to the π-π stacking among the common quinoxaline units in the bridge layer and hTM, Qx MACl induces the π-π stacking of the PBQ12 film and improves the film morphology of hTMs with better conductivity. Additionally, Qx MACl can effectively passivate the perovskite surface, and PBQ12 possesses appropriate energy levels and high hole mobility. The pero-SCs based on FAPbI3with PBQ12/Qx MACl treatment showed a higher power conversion efficiency（PCE） of 24.05% and outstanding stability, maintaining 95.4% and 92.1% of its initial PCE after 750 h of storage and after over 800 h of thermal annealing at 85 °C, respectively. To further enhance the PCE of the PBQ12/Qx MACl-based devices, we developed a non-metal ion dopant for the PBQ12 hTM. Through trace doping of PBQ12 hTM by the non-metal ion dopant, the PCE of the PBQ12/Qx MACl-based devices reached 25.24%（the calibrated PCE of 24.55% by the National Institute of Metrology, China）.

关键词： D-A copolymer, hole transport materials, bifunctional bridge capping layer, passivation perovskite solar cells