检索结果-南通市图书馆

Rice science 2024年第4期31卷 449-462,I0027-I0030页

作者： Anuradha KUMARI wusirika ramakrishna Department of Biochemistry Central University of PunjabPunjab 151401India

Tissue culture techniques were used to produce large amounts of bioactive compounds with medicinal potential, overcoming space and time constraints for cancer prevention. Rice callus suspension cultures(RCSC) and seed extracts prepared from aromatic rice varieties were used to evaluate the cytotoxic impact on human colon and lung cancer cell lines, as well as a normal control cell line, using Taxol as a positive control. RCSC and seed extracts from two Indian aromatic rice varieties were applied at different concentrations to treat the cancer cell lines and normal lung fibroblasts over varying time intervals. Apoptosis was assessed in 1:5 dilutions of the A549 and HT-29 cell lines treated with RCSC for 72 h, using propidium iodide staining and flow cytometry. RCSC showed a more potent cytotoxic effect than seed extracts with minimal effect on the normal cell line, in contrast to Taxol. Confocal microscopy and flow cytometry further confirmed the apoptotic effect of RCSC. Gas chromatography-mass spectrometry-based metabolic profiling identified metabolites involved in cytotoxicity and highlighted altered pathways. RCSC is proposed as an alternative source for the development of novel anticancer drugs with reduced side effects.

关键词： anticancer cytotoxicity metabolite profiling plant tissue culture rice callus suspension culture secondary metabolite

Anticancer Activities of Plant Secondary Metabolites:Rice Callus Suspension Culture as a New Paradigm

在线全文

学校读者我要写书评

暂无评论

Rice science 2021年第1期28卷 13-30页

作者： wusirika ramakrishna Anuradha Kumari Nafeesa Rahman Pallavi Mandave Department of Biochemistry Central University of PunjabBathindaPunjab 151001India Department of Biological Sciences Michigan Technological University1400 Townsend Drive HoughtonMichigan 49931USA Interactive Research School for Health Affairs Bharati VidyapeethPuneMaharashtra 411043India

Plant natural products including alkaloids,polyphenols,terpenoids and flavonoids have been reported to exert anticancer activity by targeting various metabolic *** biological pathways regulated by plant products can serve as novel drug *** natural compounds or their derivatives used for cancer treatment and some novel plant-based compounds which are used in clinical trials were *** suspension culture with secondary metabolites can provide a continuous source of plant pharmaceuticals without time and space *** research has shown that rice callus suspension culture can kill>95%cancer cells with no significant effect on the growth of normal *** role of candidate genes and metabolites which are likely to be involved in the process and their potential to serve as anticancer and anti-inflammatory agents were *** scale production of plant callus suspension culture and its constituents can be achieved using elicitors which enhance specific secondary metabolites combined with bioprocess technology.

关键词： plant metabolite cancer metabolism rice callus suspension culture cytotoxicity anticancer agent

Engineering the axial coordination of cobalt single atom catalysts for efficient photocatalytic hydrogen evolution

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第6期17卷 5114-5121页

作者： Ning Kang Lingwen Liao Xue Zhang Zhen He Binlu Yu Jiahong Wang Yongquan Qu Paul KChu Seeram ramakrishna Xue-Feng Yu Xin Wang Licheng Bai Materials Interfaces Center Shenzhen Institute of Advanced TechnologyChinese Academy of Sciences(CAS)Shenzhen 518055China Key Laboratory of Materials Physics Anhui Key Laboratory of Nanomaterials and NanotechnologyCAS Center for Excellence in NanoscienceInstitute of Solid State PhysicsChinese Academy of SciencesHefei 230031China Department of Chemistry City University of Hong KongKowloonHong Kong 999077China Hong Kong Branch of National Precious Metals Material Engineering Research Center(NPMM) City University of Hong KongKowloonHong Kong 999077China Key Laboratory of Special Functional and Smart Polymer Materials of Ministry of Industry and Information Technology School of Chemistry and Chemical EngineeringNorthwestern Polytechnical UniversityXi’an 710072China Department of Physics and Department of Materials Science and Engineering City University of Hong KongKowloonHong Kong 999077China National University of Singapore(NUS)Centre for Nanofibers and Nanotechnology Department of Mechanical EngineeringNational University of SingaporeSingapore 117542Singapore

Improving the catalytic activity of non-noble metal single atom catalysts(SACs)has attracted considerable attention in materials *** optimizing the local electronic structure of single atom can greatly improve their catalytic activity,it often involves in-plane modulation and requires high ***,we report a novel strategy to manipulate the local electronic structure of SACs via the modulation of axial Co-S bond anchored onto graphitic carbon nitride(C_(3)N_(4))at room temperature(RT).Each Co atom is bonded to four N atoms and one S atom(Co-(N,S)/C_(3)N_(4)).Owing to the greater electronegativity of S in the Co-S bond,the local electronic structure of the Co atoms is available to be controlled at a relatively moderate ***,when employed for the photocatalytic hydrogen evolution reaction,the adsorption energy of intermediate hydrogen(H*)on the Co atoms is remarkably *** the presence of the Co-(N,S)/C_(3)N_(4)SACs,the hydrogen evolution rates reach up to 10 mmol/(g·h),which is nearly 10 and 2.5 times greater than the rates in the presence of previously reported transition metal/C_(3)N_(4)and noble platinum nanoparticles(PtNPs)/C_(3)N_(4)catalysts,*** to the tailorable axial Co-S bond in the SAC,the local electronic structure of the Co atoms can be further optimized for other photocatalytic *** axial coordination engineering strategy is universal in catalyst designing and can be used for a variety of photocatalytic applications.

关键词： transition metal single-atom local electronic structure photocatalytic hydrogen evolution graphitic carbon nitride axial coordination environment

Electronic properties of 2D materials and their junctions

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Materials Science 2024年第1期6卷 1-23页

作者： Taposhree Dutta Neha Yadav Yongling Wu Gary J.Cheng Xiu Liang Seeram ramakrishna Aoussaj Sbai Rajeev Gupta Aniruddha Mondal Zheng Hongyu Ashish Yadav Department of Chemistry Indian Institute of Engineering Science and TechnologyShibpurWest Bengal711103India Center for Advanced Laser Manufacturing(CALM) Shandong University of TechnologyZibo255000PR China School of Industrial Engineering Purdue University315 N.Grant St.West LafayetteIN47907United States Birck Nanotechnology Center Purdue University1205 W State St.West LafayetteIN47907United States Advanced Materials Institute Qilu University of TechnologyShandong Academy of SciencesJinan250014PR China Nanoscience and Nanotechnology Initiative National University of Singapore10 Kent Ridge Crescent119260Singapore Faculty of Applied Phsyics and Mathematics Gdansk University of Technology Narutowicza 11/1280233GdanskPoland Department of Physics School of EngineeringUniversity of Petroleum&Energy StudiesDehradun248007UttarakhandIndia Department of Physics National Institute of Technology DurgapurDurgapur713209West BengalIndia

With an extensive range of distinctive features at nano meter-scale thicknesses,two-dimensional(2D)materials drawn the attention of the scientific *** tremendous advancements in exploratory research on 2D materials,knowledge of 2D electrical transport and carrier dynamics still in its ***,here we highlighted the electrical characteristics of 2D materials with electronic band structure,electronic transport,dielectric constant,carriers *** atomic thinness of 2D materials makes substantially scaled field-effect transistors(FETs)with reduced short-channel effects conceivable,even though strong carrier mobility required for high performance,low-voltage device *** also discussed here about factors affecting 2D materials which easily enhanced the activity of those materials for various ***,Those 2D materials used in state-of-the-art electrical and optoelectronic devices because of the extensive nature of their electronic band structure.2D materials offer unprecedented freedom for the design of novel p-n junction device topologies in contrast to conventional bulk *** also,describe the numerous 2D p-n junctions,such as homo junction and hetero junction including mixed dimensional ***,we talked about the problems and potential for the future.

关键词： 2D materials Electrical properties p-n junctions Mixed hereto junctions Homo junctions Electrical transport

Quantification of Structurally Alert Mutagenic Impurities in Meropenem Trihydrate Drug Substance by Liquid Chromatography with High Resolution Mass Spectrometer (LC-HRMS)

在线全文

学校读者我要写书评

暂无评论

American Journal of Analytical Chemistry 2024年第3期15卷 119-133页

作者： Anwar Sulaiman K. ramakrishna Reddy Vundavilli Jagadeesh Kumar Hemant Kumar Sharma REVA University Bangalore India Quality Division Aurobindo Pharma Limited Hyderabad India APL Research Centre-II Analytical Research Department Aurobindo Pharma Limited Hyderabad India

Potential mutagenic impurities in Active Pharmaceutical Ingredient, Meropenem Trihydrate were assessed and a novel analytical method for their quantification was developed and validated. This Liquid Chromatographic method using High Resolution Mass Spectrometer (LC-HRMS) technique is proved to be suitable for simultaneous quantification of all ten identified impurities with required specificity, sensitivity, resolution, precision, accuracy, and other method characteristics as per ICH Guidelines. The acceptable limit of less than 2.9 μg/g was considered for evaluations, based on drug substance dosage and duration of treatment. The method stands most sensitive with a Limit of Detection of 0.35 μg/g, considering the challenge full acceptance criteria as per current regulatory standards.

关键词： Mutagenic Impurities LC-HRMS Meropenem Trihydrate Method Validation

A framework for the sustainability implications of 3D bioprinting through nature-inspired materials and structures

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Bio-Design and Manufacturing 2022年第2期5卷 412-423页

作者： Ruban Whenish Seeram ramakrishna Amit Kumar Jaiswal Geetha Manivasagam Center for Biomaterials Cellular and Molecular TheranosticsVellore Institute of TechnologyVelloreTamilnadu 632014India Department of Mechanical Engineering National University of Singapore9 Engineering Drive 1119260Singapore

Introduction The climax of the industrial revolution was marked by the rapid growth of industry,and advancement in technologies have further fueled this industrial expansion,leading to a surge in economic *** technolo... 详细信息

关键词： printing advancement revolution

Predicting the success rate of a start-up using LSTM with a swish activation function

在线全文

学校读者我要写书评

暂无评论

Journal of Control and Decision 2022年第3期9卷 355-363页

作者： ramakrishna Allu Venkata Nageswara Rao Padmanabhuni Department of Computer Science and Engineering GITAM(Deemed to be university)VisakhapatnamAndhra PradeshIndia

The researchers emphasised more small-scale start-ups which required improvement in the economy decreased the failure rate by avoiding the valuable *** resources were required to be used without wasting them lead to the development of the economy and reduces the rate of ***,to minimise resource wastage and to avoid the risk of failure the researchers considered certain factors that affected the failure and success of smallscale *** present research uses the Crunch Base dataset that predicts the success or failure of a start-up by using the Long Short Term Memory(LSTM).The LSTM unit Recurrent Neural Network(RNN)uses the Swish activation function in Feed Forward Neural(FFN)Network for the *** proposed LSTM obtained better accuracy of 71.64%when compared with existing methods such as RNN that attained 65.67%and Artificial Neural Network(ANN)of 69.7%.

关键词： Crunch base dataset gross domestic product long short term memory recurrent neural network start-up companies

A state-of-the-art review of the fabrication and characteristics of titanium and its alloys for biomedical applications

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Bio-Design and Manufacturing 2022年第2期5卷 371-395页

作者： Masoud Sarraf Erfan Rezvani Ghomi Saeid Alipour Seeram ramakrishna Nazatul Liana Sukiman Centre of Advanced Materials Department of Mechanical EngineeringFaculty of EngineeringUniversity of Malaya50603 Kuala LumpurMalaysia Department of Materials Science and Engineering Sharif University of TechnologyAzadi Ave.P.O.Box 11365‑9466TehranIran Center for Nanotechnology and Sustainability Department of Mechanical EngineeringNational University of SingaporeSingapore 117581Singapore

Commercially pure titanium and titanium alloys have been among the most commonly used materials for biomedical applications since the 1950 *** to the excellent mechanical tribological properties,corrosion resistance,biocompatibility,and antibacterial properties of titanium,it is getting much attention as a biomaterial for ***,titanium promotes osseointegration without any additional adhesives by physically bonding with the living bone at the implant *** properties are crucial for producing high-strength metallic alloys for biomedical *** alloys are manufactured into the three types ofα,β,andα+β.The scientific and clinical understanding of titanium and its potential applications,especially in the biomedical field,are still in the early *** review aims to establish a credible platform for the current and future roles of titanium in *** first explore the developmental history of ***,we review the recent advancement of the utility of titanium in diverse biomedical areas,its functional properties,mechanisms of biocompatibility,host tissue responses,and various relevant antimicrobial *** research will be directed toward advanced manufacturing technologies,such as powder-based additive manufacturing,electron beam melting and laser melting deposition,as well as analyzing the effects of alloying elements on the biocompatibility,corrosion resistance,and mechanical properties of ***,the role of titania nanotubes in regenerative medicine and nanomedicine applications,such as localized drug delivery system,immunomodulatory agents,antibacterial agents,and hemocompatibility,is investigated,and the paper concludes with the future outlook of titanium alloys as biomaterials.

关键词： Titanium and titanium alloys Biomedical application Functional properties Biocompatibility Antibacterial activity Advanced manufacturing

Recent insights on iron based nanostructured electrocatalyst and current status of proton exchange membrane fuel cell for sustainable transport

在线全文

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2022年第6期31卷 466-489,I0013页

作者： Mohamedazeem M.Mohideen Adiyodi Veettil Radhamani Seeram ramakrishna Yen Wei Yong Liu Beijing Key Laboratory of Advanced Functional Polymer Composites College of Materials Science and EngineeringBeijing University of Chemical TechnologyBeijing 100029China Department of Physics and Nanotechnology SRM Institute of Science and TechnologyKattankulathur 603203India Center for Nanofibers and Nanotechnology National University of SingaporeSingapore 1157Singapore Department of Chemistry Key Lab of Bioorganic Phosphorus Chemistry&Chemical BiologyTsinghua UniversityBeijing 100084China

Bridging the performance gap of the electrocatalyst between the rotating disk electrode(RDE) and membrane electrode assembly(MEA) level testing is the key to reducing the total cost of proton exchange membrane fuel cell(PEMFC) vehicles. Presently, platinum metal accounts for ~42% of the total cost of the PEMFC vehicles for usage in the cathode catalyst layer, where the sluggish oxygen reduction reaction(ORR) occurs. An alternative to the platinum catalyst, the Fe-N-C catalyst has attracted considerable interest for PEMFC due to its cost-effectiveness and high catalytic activity towards ORR. However, the excellent ORR activity of Fe-N-C obtained from RDE studies rarely translates the same performance into MEA operating conditions. Such a performance gap is mainly attributed to the lack of atomic-level understanding of Fe-N-C active sites and their ORR mechanism. Besides, unless the cost of expensive electrocatalyst is reduced, the total operation cost of the PEMFC vehicles remains constant. Therefore,developing highly efficient Fe-N-C catalysts from academic and industrial perspectives is critical for commercializing PEMFC vehicles. Here, the scope of the review is three-fold. First, we discussed the atomiclevel insights of Fe-N-C active sites and ORR mechanism, followed by unraveling the different iron-based nanostructured ORR electrocatalysts, including oxide, carbide, nitride, phosphide, sulfide, and singleatom catalysts. And then we bridged their ORR catalytic performance gap between the RDE and MEA tests for real operating conditions of PEMFC vehicles. Second, we focused on bridging the cost barriers of PEMFC vehicles between capital, operation, and end-user. Finally, we provided the path to achieve sustainable development goals by commercializing PEMFC vehicles for a better world.

关键词： Proton exchange membrane fuel cell(PEMFC) Active sites Iron-based nanostructure Sustainable development goals

Facile one-step hydrothermal route to MSe/Mo_(3)Se_(4)(M:Zn,Mn,and Ni)-based electrode materials for ultralong-life hybrid supercapacitors

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2023年第25期156卷 230-240页

作者： B.N.Vamsi Krishna Obula Reddy Ankinapalli Ayyaluri ramakrishna Reddy Jae Su Yu Department of Electronics and Information Convergence Engineering Institute for Wearable Convergence ElectronicsKyung Hee UniversityYongin-siGyeonggi-do 17104Republic of Korea

Transition metal selenides have attracted great interest in electrochemical energy storage applications because of their good electrochemical activity and conductivity ***,we reported the metal molybdenum selenide(M Se/Mo_(3)Se_(4)(M:Zn,Mn,and Ni))electrode materials on their morphological and electrochemical properties by varying the metal ions via a facile hydrothermal *** effects of the structural,morphological,and surface area properties of the prepared powder materials on their electrochemical performance were *** to the hierarchical porous and unique interconnected structure,the nickel molybdenum selenide nanosheet spheres(NMS NSSs)-based electrode material delivered an excellent specific capacity value of 252 mAh g^(-1) at a current density of 1 Ag^(-1).Moreover,the optimized NMS NSSs electrode exhibited outstanding cycling stability with a capacity retention of 80%and a corresponding coulombic efficiency of 99%after 80,000 ***,a pouch-type hybrid supercapacitor(HSC)device was assembled using NMS NSSs material as a positive electrode and activated carbon as a negative electrode in 1 M aqueous KOH ***,the assembled HSC device exhibited superior energy and power density values as well as magnificent cycling *** real-time practical applications,light-emitting diodes and a digital display were powered using two series-connected HSC ***,the obtained tremendous results strongly suggest that the NiSe/Mo_(3)Se_(4) NSSs-based materials could be a promising electrode for ultralong-life energy storage applications.

关键词： Nickel selenides Molybdenum selenides Nanosheet spheres Ultralong-life cycling stability