检索结果-南通市图书馆

Gigantic occipital epidermal cyst in a 56-year-old female:A case report

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Clinical Cases 2024年第6期12卷 1169-1173页

作者： yao Wei Peng Chen Hao wu Department of Neurosurgery The Second Affiliated Hospital of Xi’an Medical UniversityXi'an 710038Shaanxi ProvinceChina

BACKGROUND Gigantic epidermal cysts(GECs)are rare benign skin appendicular tumours also known as keratinocysts.GECs have a high incidence and their wall is made up of epidermis.Epidermal cysts can occur in any part of the skin;clinical manifestations include skin colour hemispherical swelling;cystic;mobile;0.5 cm to several centimetres in diameter;and slow growth.CASE SUMMARY Herein,we report a case involving a 56-year-old female with a GEC in the occipitalia.On July 25,2023,a patient with a GEC was admitted to the neurosurgery Department of the Second Affiliated Hospital of Xi'an Medical University.The phyma was shown to be a solid mass during the operation and was confirmed to be a GEC based on pathological examination.CONCLUSION Epidermal cysts are common cystic nodules on the surface of the body,the aetiology is unclear,the clinical manifestations can vary,and the misdiagnosis rate is high.However,giant epidermal cysts are rare.In most cases,however,the prognosis is satisfactory.This paper analyses and summarizes the population,location,clinical and pathological characteristics and pathogenesis of the disease to strengthen the understanding of this disease and improve the accuracy of clinical diagnosis.

关键词： Epidermal cyst Occipital Brain Cyst Case report

Multi-Objective Optimization Based on Life Cycle Assessment for Hybrid Solar and Biomass Combined Cooling,Heating and Power System

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第3期33卷 931-950页

作者： LIU Jiejie LI yao MENG Xianyang wu Jiangtao Key Laboratory of Thermo-Fluid Science and Engineering Ministry of EducationXi’an Jiaotong UniversityXi’an710049China

The complementary of biomass and solar energy in combined cooling,heating and power(CCHP)system provides an efficient solution to address the energy crisis and environmental pollutants.This work aims to propose a multi-objective optimization model based on the life cycle assessment(LCA)method for the optimal design of hybrid solar and biomass system.The life-cycle process of the poly-generation system is divided into six phases to analyze energy consumption and greenhouse gas emissions.The comprehensive performances of the hybrid system are optimized by incorporating the evaluation criteria,including environmental impact in the whole life cycle,renewable energy contribution and economic benefit.The non-dominated sorting genetic algorithmⅡ(NSGA-Ⅱ)with the technique for order preference by similarity to ideal solution(TOPSIS)method is employed to search the Pareto frontier result and thereby achieve optimal performance.The developed optimization methodology is used for a case study in an industrial park.The results indicate that the best performance from the optimized hybrid system is reached with the environmental impact load reduction rate(EILRR)of 46.03%,renewable energy contribution proportion(RECP)of 92.73%and annual total cost saving rate(ATCSR)of35.75%,respectively.By comparing pollutant-eq emissions of different stages,the operation phase emits the largest pollutant followed by the phase of raw material acquisition.Overall,this study reveals that the proposed multi-objective optimization model integrated with LCA method delivers an alternative path for the design and optimization of more sustainable CCHP system.

关键词： combined cooling heating and power system solar-biomass multi-objective optimization life cycle assessment optimal design

维普期刊数据库

Skin Microbiota and the Skin Barrier

在线全文

学校读者我要写书评

暂无评论

International Journal of Dermatology And Venereology 2024年第1期07卷 18-26页

作者： wu Ming-Yang yao Xu Department of Allergy and Rheumatology Jiangsu Key Laboratory of Molecular Biology for Skin Diseases and STIs Hospital for Skin Diseases (Institute of Dermatology) chinese Academy of Medical Sciences and Peking Union Medical College Nanjing Jiangsu 210042 china

The skin constitutes the primary barrier between the human body and the external environment. The skin microbiome plays an important role in the microecosystem on the skin surface and mediates multiple facets of the skin barrier function, including physical, chemical, microbial, and immune barriers. In this review, we discuss the host–microbiota interactions in barrier maintenance and disruption, implications for skin disorders such as atopic dermatitis, psoriasis, and rosacea, and the latest strategies for targeting the skin microbiota to improve the skin barrier.

关键词： skin barrier microbiota immune atopic dermatitis Staphylococcus aureus

Multi-functional and multi-scenario applications for MXene aerogels with synergistically enhanced asymmetric modules

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第4期17卷 3359-3368页

作者： Junru yao Jintang Zhou Feng Yang Guiyu Peng Yijie Liu Zhengjun yao Fan wu Haibo Zeng College of Materials Science and Technology Nanjing University of Aeronautics and AstronauticsNanjing 211100China Key Laboratory of Material Preparation and Protection for Harsh Environment(Nanjing University of Aeronautics and Astronautics) Ministry of Industry and Information TechnologyNanjing 211100China School of Mechanical Engineering Nanjing University of Science and TechnologyNanjing 210094China

The development of multifunctional materials and synergistic applications of various functions are important conditions for integrated and miniaturized equipment.Here,we developed asymmetric MXene/aramid nanofibers/polyimides(AMAP)aerogels with different modules using an integrated molding process.Cleverly asymmetric modules(layered MXene/aramid nanofibers section and porous MXene/aramid nanofibers/polyimides section)interactions are beneficial for enhanced performances,resulting in low reflection electromagnetic interference(EMI)shielding(specific shielding effectiveness of 2483(dB·cm^(3))/g and a low R-value of 0.0138),high-efficiency infrared radiation(IR)stealth(ultra-low thermal conductivity of 0.045 W/(m·K)and IR emissivity of 0.32 at 3–5μm and 0.28 at 8–14μm),and excellent thermal management performances of insulated Joule heating.Furthermore,these multifunctional AMAP aerogels are suitable for various application scenarios such as personal and building protection against electromagnetic pollution and cold,as well as military equipment protection against infrared detection and EMI.

关键词： multifunctional material electromagnetic interference shielding low reflection infrared radiation stealth thermal insulation Joule heating

Application of surfactant for improving leaching process of weathered crust elution-deposited rare earth ores

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Rare Earths 2024年第1期42卷 181-190,I0007页

作者： Fang Zhou Lisen Zhang Zhiwei Wang Yixin Zhang Ru'an chi Xiaoyan wu Key Laboratory for Green Chemical Process of Ministry of Education Wuhan Institute of TechnologyWuhan430073China

Weathered crust elution-deposited rare earth ores(WREOs)in china are the main source of medium and heavy rare earths in the world.In order to improve the seepage and the mass transfer of traditional ammonium salt leaching process of WREOs,surfactants were added in the ammonium sulfate leaching solution and the ammonium chloride leaching solution.The leaching kinetics,the mass transfer process,and the adhesion work reduction factor calculated from the interfacial properties were studied to reveal the strengthening mechanism of surfactant.In the presence of the tested five surfactants,cetyl trimethyl ammonium bromide(CTAB),dodecyl trimethyl ammonium bromide(DTAB),sodium dodecyl sulfate(SDS),sodium oleate and oleic acid,the permeability of WREOs is improved,the rare earth(RE)leaching efficiency increase and the impurity aluminum(Al)leaching efficiency decrease,indicating its promotional effect on the leaching process of WREOs.Furthermore,CTAB shows a better leaching enhancement,and the optimal addition dosage is 0.4 g/L for the two ammonium salt leaching agent systems.The kinetics analysis shows the internal diffusion controls model of RE and Al leaching process,and the leaching kinetics equations of RE and Al related to CTAB concentration were obtained for the two ammonium salt leaching systems.According to the chromatographic plate theory,the mass transfer efficiency of RE increases with the CTAB concentration increasing until 0.4 g/L,which confirms that the optimal CTAB addition is 0.4 g/L.Smaller adhesion work and adhesion work reduction factor indicate more favorable permeation as well as the leaching process.

关键词： Weathered crust elution-deposited rare earth ores Surfactant Kinetics Mass transfer

维普期刊数据库

Non-cooperative Game Based Optimal Dispatch Model for Integrated Energy Systems

在线全文

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2024年第3期10卷 1195-1207页

作者： Jiandong Duan Qian Sun Chen wu yao Yang Siyu Tu School of Electrical Engineering Xi’an University of TechnologyXi’an710056China IEEE CSEE

In order to improve the efficiency of energy utilization,the integrated energy system(IES)has emerged.The IES typically acts as a whole system during operations,the subsystems are separated,and the interests of each system are independent.In this paper,considering the relationship between the various energy systems,non-cooperative game theory is used to establish the optimal dispatch model.The proposed model mainly relies on the relationship between the cooperation and competition among various subsystems to obtain the maximum benefit they can accept.Furthermore,the basic definition is combined with the particle swarm optimization algorithm to solve the problem.The results show that the optimization strategy proposed in this paper can operate safely and reliably,and effectively distribute the benefits of each energy system.

关键词： Integrated energy system multi-energy complimentarily non-cooperative game theory

Low-permittivity LiLn(PO3)4(Ln=La,Sm,Eu)dielectric ceramics for microwave/millimeter-wave communication

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2024年第5期13卷 602-620页

作者： Huanrong Tian Xiaohan Zhang Zidong Zhang yao Liu Haitao wu Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials(Ministry of Education) Shandong UniversityJinan 250061China School of Materials Science and Engineering Shandong UniversityJinan 250061China School of Environmental and Material Engineering Yantai UniversityYantai 264005China

The development of dielectric materials with low permittivity and low loss is a great challenge in wireless communication.In this study,LiLn(PO_(3))_(4)(Ln=La,Sm,Eu)ceramic systems were successfully prepared using the traditional solid-state method.X-ray diffraction analysis indicated that the LiLn(PO_(3))_(4)ceramics crystallized in a monoclinic structure when sintered at 850–940℃.The characteristic peak shifted to higher angles with variations in the Ln element,which was ascribed to a reduction in the cell volume.Further analysis by structure refinement revealed that the reduction in the cell volume resulted from the decrease in chemical bond lengths and the compression of[LiO4]and[PO4]tetrahedra.Remarkably,the LiLn(PO_(3))_(4)ceramic system displayed exceptional performance at low sintering temperatures(910–925℃),including a high quality factor(Q·f)of 41,607–75,968 GHz,low temperature coefficient of resonant frequency(τf)ranging from−19.64 to−47.49 ppm/℃,low permittivity(εr)between 5.04 and 5.26,and low density(3.04–3.26 g/cm^(3)).The application of Phillips–van Vechten–Levine(P–V–L)theory revealed that the increased Q·f value of the LiLn(PO_(3))_(4)systems can be attributed to the enhanced packing fraction,bond covalency,and lattice energy,and the stability ofτf was associated with the increase in the bond energy.Furthermore,a prototype microstrip patch antenna using LiEu(PO3)4 ceramics was fabricated.The measurement results demonstrated excellent antenna performance with a bandwidth of 360 MHz and a peak gain of 5.11 dB at a central frequency of 5.08 GHz.Therefore,low-εr LiLn(PO_(3))_(4)ceramic systems are promising candidates for microwave/millimeter-wave communication.

关键词： low permittivity LiLn(PO_(3))_(4) microwave dielectric properties Phillips-van Vechten-Levine(P-V-L)theory microstrip patch antenna

A stable one-point quadrature rule for three-dimensional numerical manifold method

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science china(Technological Sciences) 2024年第5期67卷 1401-1416页

作者： ZHANG Ning ZHENG Hong YANG Liang wu WenAn YUAN chi School of Civil Engineering Qinghai UniversityQinghai810016China Key Laboratory of Urban Security and Disaster Engineering Ministry of EducationBeijing University of TechnologyBeijing100124China Faculty of Engineering China University of GeoscienceWuhan430074China

We present a numerically stable one-point quadrature rule for the stiffness matrix and mass matrix of the three-dimensional numerical manifold method(3D NMM).The rule simplifies the integration over irregularly shaped manifold elements and overcomes locking issues,and it does not cause spurious modes in modal analysis.The essential idea is to transfer the integral over a manifold element to a few moments to the element center,thereby deriving a one-point integration rule by the moments and making modifications to avoid locking issues.For the stiffness matrix,after the virtual work is decomposed into moments,higher-order moments are modified to overcome locking issues in nearly incompressible and bending-dominated conditions.For the mass matrix,the consistent and lumped types are derived by moments.In particular,the lumped type has the clear advantage of simplicity.The proposed method is naturally suitable for 3D NMM meshes automatically generated from a regular grid.Numerical tests justify the accuracy improvements and the stability of the proposed procedure.

关键词： three-dimensional numerical manifold method quadrature rule locking mass lumping

维普期刊数据库

A Deep Learning-Enabled Skin-Inspired Pressure Sensor for Complicated Recognition Tasks with Ultralong Life

在线全文

学校读者我要写书评

暂无评论

Research 2024年第1期2023卷 443-454页

作者： Yingxi Xie Xiaohua wu Xiangbao Huang Qinghua Liang Shiping Deng Zeji wu Yunpeng yao Longsheng Lu School of Mechanical&Automotive Engineering South China University of TechnologyGuangzhouChina

Flexible full-textile pressure sensor is able to integrate with clothing directly,which has drawn extensive attention from scholars recently.But the realization of flexible full-textile pressure sensor with high sensitivity,wide detection range,and long working life remains challenge.Complex recognition tasks necessitate intricate sensor arrays that require extensive data processing and are susceptible to damage.The human skin is capable of interpreting tactile signals,such as sliding,by encoding pressure changes and performing complex perceptual tasks.Inspired by the skin,we have developed a simple dip-and-dry approach to fabricate a full-textile pressure sensor with signal transmission layers,protective layers,and sensing layers.The sensor achieves high sensitivity(2.16 kPa^(−1)),ultrawide detection range(0 to 155.485 kPa),impressive mechanical stability of 1 million loading/unloading cycles without fatigue,and low material cost.The signal transmission layers that collect local signals enable real-world complicated task recognition through one single sensor.We developed an artificial Internet of Things system utilizing a single sensor,which successfully achieved high accuracy in 4 tasks,including handwriting digit recognition and human activity recognition.The results demonstrate that skin-inspired full-textile sensor paves a promising route toward the development of electronic textiles with important potential in real-world applications,including human–machine interaction and human activity detection.

关键词： Deep Skin utilizing