检索结果-南通市图书馆

Frontiers of Structural and Civil Engineering 2024年第1期18卷 14-29页

作者： Jing XU Xianzhi WANG wu yao Anna A.KULMINSKAYA Surendra P.SHAH Key Laboratory of Advanced Civil Engineering Materials(Ministry of Education) School of Materials Science and EngineeringTongji UniversityShanghai 201804China Petersburg Nuclear Physics Institute Named by B.P.Konstantinov of National Research Centre Kurchatov InstituteGatchina 188300Russia Center for Advanced Construction Materials University of Texas at ArlingtonArlingtonTX 76019USA

Microbially induced carbonate precipitation(MICP)is a promising technique for the autonomous healing of concrete cracks.In this study,the effect of pH on MICP was investigated.The results indicate that the MICP process was inhibited when the pH was higher than 11.Both vaterite and calcite were produced when the pH was8.Recycled concrete aggregates(RCA)coated with sodium silicate have been proposed as protective carriers for microbial healing agents.Although the presence of the coated RCA resulted in a loss of the splitting tension strength of the concrete,the loaded healing agents were highly efficient in self-healing cracks.Concrete incorporated with 20%RCA loaded with healing agents exhibited the best self-healing performance.When the initial crack widths were between 0.3 and 0.4 mm,the 7-d mean healing rate was approximately 90%.At 28 d,the crack area filling ratio was 86.4%,while its water tightness recovery ratio was 74.4%and 29.8%,respectively,for rapid and slow absorption.This study suggests that RCA coated with sodium silicate is an effective method for packaging microbial healing agents and has great potential for developing cost-effective self-healing concrete.

关键词： self-healing microbial-induced carbonate precipitation water uptake recycled concrete aggregate protective carrier

Selection Method for New Energy Output Guaranteed Rates Considering Optimal Energy Storage Configuration

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2024年第2期10卷 539-547页

作者： Xin Cheng Tong wu Wei yao Yan Yang Guangdong Power Grid Corporation Guangzhou 510620China State Key Laboratory of Advanced Electromagnetic Engineering and Technology and School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430074China

The output of new energy represented by wind power and photovoltaic power features volatility and randomness. It is a practical approach to use the guaranteed rate with statistical characteristics to analyze the output coefficient of new energy. However, there is a lack of analysis and demonstration on the value of the new energy output guaranteed rate. To solve this problem, a selection method for the new energy output guaranteed rate considering optimal energy storage configuration is proposed. First, the influence of the new energy output guaranteed rate on the new energy output coefficient is analyzed. Secondly, with the goal of minimizing the comprehensive costs, an optimal configuration model of energy storage based on the output guaranteed rate of new energy is constructed, and particle swarm optimization is used for the optimization solution. Then, according to the optimal energy storage configuration results under different guaranteed rates, a reasonable new energy output guaranteed rate is determined by maximizing the comprehensive benefits obtained from energy storage. Finally, an example applied to the power grid in an area of Guangdong in Southern China is provided to illustrate the effectiveness of the proposed method.

关键词： Energystorage optimization guaranteed output guaranteed rate new energy consumption

Gigantic occipital epidermal cyst in a 56-year-old female:A case report

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Clinical Cases 2024年第6期12卷 1169-1173页

作者： yao Wei Peng Chen Hao wu Department of Neurosurgery The Second Affiliated Hospital of Xi’an Medical UniversityXi'an 710038Shaanxi ProvinceChina

BACKGROUND Gigantic epidermal cysts(GECs)are rare benign skin appendicular tumours also known as keratinocysts.GECs have a high incidence and their wall is made up of epidermis.Epidermal cysts can occur in any part of the skin;clinical manifestations include skin colour hemispherical swelling;cystic;mobile;0.5 cm to several centimetres in diameter;and slow growth.CASE SUMMARY Herein,we report a case involving a 56-year-old female with a GEC in the occipitalia.On July 25,2023,a patient with a GEC was admitted to the neurosurgery Department of the Second Affiliated Hospital of Xi'an Medical University.The phyma was shown to be a solid mass during the operation and was confirmed to be a GEC based on pathological examination.CONCLUSION Epidermal cysts are common cystic nodules on the surface of the body,the aetiology is unclear,the clinical manifestations can vary,and the misdiagnosis rate is high.However,giant epidermal cysts are rare.In most cases,however,the prognosis is satisfactory.This paper analyses and summarizes the population,location,clinical and pathological characteristics and pathogenesis of the disease to strengthen the understanding of this disease and improve the accuracy of clinical diagnosis.

关键词： Epidermal cyst Occipital Brain Cyst Case report

Multi-Objective Optimization Based on Life Cycle Assessment for Hybrid Solar and Biomass Combined Cooling,Heating and Power System

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Thermal Science 2024年第3期33卷 931-950页

作者： LIU Jiejie LI yao MENG Xianyang wu Jiangtao Key Laboratory of Thermo-Fluid Science and Engineering Ministry of EducationXi’an Jiaotong UniversityXi’an710049China

The complementary of biomass and solar energy in combined cooling,heating and power(CCHP)system provides an efficient solution to address the energy crisis and environmental pollutants.This work aims to propose a multi-objective optimization model based on the life cycle assessment(LCA)method for the optimal design of hybrid solar and biomass system.The life-cycle process of the poly-generation system is divided into six phases to analyze energy consumption and greenhouse gas emissions.The comprehensive performances of the hybrid system are optimized by incorporating the evaluation criteria,including environmental impact in the whole life cycle,renewable energy contribution and economic benefit.The non-dominated sorting genetic algorithmⅡ(NSGA-Ⅱ)with the technique for order preference by similarity to ideal solution(TOPSIS)method is employed to search the Pareto frontier result and thereby achieve optimal performance.The developed optimization methodology is used for a case study in an industrial park.The results indicate that the best performance from the optimized hybrid system is reached with the environmental impact load reduction rate(EILRR)of 46.03%,renewable energy contribution proportion(RECP)of 92.73%and annual total cost saving rate(ATCSR)of35.75%,respectively.By comparing pollutant-eq emissions of different stages,the operation phase emits the largest pollutant followed by the phase of raw material acquisition.Overall,this study reveals that the proposed multi-objective optimization model integrated with LCA method delivers an alternative path for the design and optimization of more sustainable CCHP system.

关键词： combined cooling heating and power system solar-biomass multi-objective optimization life cycle assessment optimal design

Skin Microbiota and the Skin Barrier

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

International Journal of Dermatology And Venereology 2024年第1期07卷 18-26页

作者： wu Ming-Yang yao Xu Department of Allergy and Rheumatology Jiangsu Key Laboratory of Molecular Biology for Skin Diseases and STIs Hospital for Skin Diseases (Institute of Dermatology) Chinese Academy of Medical Sciences and Peking Union Medical College Nanjing Jiangsu 210042 China

The skin constitutes the primary barrier between the human body and the external environment. The skin microbiome plays an important role in the microecosystem on the skin surface and mediates multiple facets of the skin barrier function, including physical, chemical, microbial, and immune barriers. In this review, we discuss the host–microbiota interactions in barrier maintenance and disruption, implications for skin disorders such as atopic dermatitis, psoriasis, and rosacea, and the latest strategies for targeting the skin microbiota to improve the skin barrier.

关键词： skin barrier microbiota immune atopic dermatitis Staphylococcus aureus

Multi-functional and multi-scenario applications for MXene aerogels with synergistically enhanced asymmetric modules

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第4期17卷 3359-3368页

作者： Junru yao Jintang Zhou Feng Yang Guiyu Peng Yijie Liu Zhengjun yao Fan wu Haibo Zeng College of Materials Science and Technology Nanjing University of Aeronautics and AstronauticsNanjing 211100China Key Laboratory of Material Preparation and Protection for Harsh Environment(Nanjing University of Aeronautics and Astronautics) Ministry of Industry and Information TechnologyNanjing 211100China School of Mechanical Engineering Nanjing University of Science and TechnologyNanjing 210094China

The development of multifunctional materials and synergistic applications of various functions are important conditions for integrated and miniaturized equipment.Here,we developed asymmetric MXene/aramid nanofibers/polyimides(AMAP)aerogels with different modules using an integrated molding process.Cleverly asymmetric modules(layered MXene/aramid nanofibers section and porous MXene/aramid nanofibers/polyimides section)interactions are beneficial for enhanced performances,resulting in low reflection electromagnetic interference(EMI)shielding(specific shielding effectiveness of 2483(dB·cm^(3))/g and a low R-value of 0.0138),high-efficiency infrared radiation(IR)stealth(ultra-low thermal conductivity of 0.045 W/(m·K)and IR emissivity of 0.32 at 3–5μm and 0.28 at 8–14μm),and excellent thermal management performances of insulated Joule heating.Furthermore,these multifunctional AMAP aerogels are suitable for various application scenarios such as personal and building protection against electromagnetic pollution and cold,as well as military equipment protection against infrared detection and EMI.

关键词： multifunctional material electromagnetic interference shielding low reflection infrared radiation stealth thermal insulation Joule heating

Non-cooperative Game Based Optimal Dispatch Model for Integrated Energy Systems

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2024年第3期10卷 1195-1207页

作者： Jiandong Duan Qian Sun Chen wu yao Yang Siyu Tu School of Electrical Engineering Xi’an University of TechnologyXi’an710056China IEEE CSEE

In order to improve the efficiency of energy utilization,the integrated energy system(IES)has emerged.The IES typically acts as a whole system during operations,the subsystems are separated,and the interests of each system are independent.In this paper,considering the relationship between the various energy systems,non-cooperative game theory is used to establish the optimal dispatch model.The proposed model mainly relies on the relationship between the cooperation and competition among various subsystems to obtain the maximum benefit they can accept.Furthermore,the basic definition is combined with the particle swarm optimization algorithm to solve the problem.The results show that the optimization strategy proposed in this paper can operate safely and reliably,and effectively distribute the benefits of each energy system.

关键词： Integrated energy system multi-energy complimentarily non-cooperative game theory

Low-permittivity LiLn(PO3)4(Ln=La,Sm,Eu)dielectric ceramics for microwave/millimeter-wave communication

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2024年第5期13卷 602-620页

作者： Huanrong Tian Xiaohan Zhang Zidong Zhang yao Liu Haitao wu Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials(Ministry of Education) Shandong UniversityJinan 250061China School of Materials Science and Engineering Shandong UniversityJinan 250061China School of Environmental and Material Engineering Yantai UniversityYantai 264005China

The development of dielectric materials with low permittivity and low loss is a great challenge in wireless communication.In this study,LiLn(PO_(3))_(4)(Ln=La,Sm,Eu)ceramic systems were successfully prepared using the traditional solid-state method.X-ray diffraction analysis indicated that the LiLn(PO_(3))_(4)ceramics crystallized in a monoclinic structure when sintered at 850–940℃.The characteristic peak shifted to higher angles with variations in the Ln element,which was ascribed to a reduction in the cell volume.Further analysis by structure refinement revealed that the reduction in the cell volume resulted from the decrease in chemical bond lengths and the compression of[LiO4]and[PO4]tetrahedra.Remarkably,the LiLn(PO_(3))_(4)ceramic system displayed exceptional performance at low sintering temperatures(910–925℃),including a high quality factor(Q·f)of 41,607–75,968 GHz,low temperature coefficient of resonant frequency(τf)ranging from−19.64 to−47.49 ppm/℃,low permittivity(εr)between 5.04 and 5.26,and low density(3.04–3.26 g/cm^(3)).The application of Phillips–van Vechten–Levine(P–V–L)theory revealed that the increased Q·f value of the LiLn(PO_(3))_(4)systems can be attributed to the enhanced packing fraction,bond covalency,and lattice energy,and the stability ofτf was associated with the increase in the bond energy.Furthermore,a prototype microstrip patch antenna using LiEu(PO3)4 ceramics was fabricated.The measurement results demonstrated excellent antenna performance with a bandwidth of 360 MHz and a peak gain of 5.11 dB at a central frequency of 5.08 GHz.Therefore,low-εr LiLn(PO_(3))_(4)ceramic systems are promising candidates for microwave/millimeter-wave communication.

关键词： low permittivity LiLn(PO_(3))_(4) microwave dielectric properties Phillips-van Vechten-Levine(P-V-L)theory microstrip patch antenna

A Deep Learning-Enabled Skin-Inspired Pressure Sensor for Complicated Recognition Tasks with Ultralong Life

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Research 2024年第1期2023卷 443-454页

作者： Yingxi Xie Xiaohua wu Xiangbao Huang Qinghua Liang Shiping Deng Zeji wu Yunpeng yao Longsheng Lu School of Mechanical&Automotive Engineering South China University of TechnologyGuangzhouChina

Flexible full-textile pressure sensor is able to integrate with clothing directly,which has drawn extensive attention from scholars recently.But the realization of flexible full-textile pressure sensor with high sensitivity,wide detection range,and long working life remains challenge.Complex recognition tasks necessitate intricate sensor arrays that require extensive data processing and are susceptible to damage.The human skin is capable of interpreting tactile signals,such as sliding,by encoding pressure changes and performing complex perceptual tasks.Inspired by the skin,we have developed a simple dip-and-dry approach to fabricate a full-textile pressure sensor with signal transmission layers,protective layers,and sensing layers.The sensor achieves high sensitivity(2.16 kPa^(−1)),ultrawide detection range(0 to 155.485 kPa),impressive mechanical stability of 1 million loading/unloading cycles without fatigue,and low material cost.The signal transmission layers that collect local signals enable real-world complicated task recognition through one single sensor.We developed an artificial Internet of Things system utilizing a single sensor,which successfully achieved high accuracy in 4 tasks,including handwriting digit recognition and human activity recognition.The results demonstrate that skin-inspired full-textile sensor paves a promising route toward the development of electronic textiles with important potential in real-world applications,including human–machine interaction and human activity detection.

关键词： Deep Skin utilizing

The reformation of catalyst:From a trial-and-error synthesis to rational design

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第4期17卷 3261-3301页

作者： Ligang Wang Jiabin wu Shunwu Wang Huan Liu yao Wang Dingsheng Wang Department of Chemistry Tsinghua UniversityBeijing 100084China

The appropriate catalysts can accelerate the reaction rate and effectively boost the efficient conversion of various molecules,which is of great importance in the study of chemistry,chemical industry,energy,materials and environmental science.Therefore,efficient,environmentally friendly,and easy to operate synthesis methods have been used to prepare various types of catalysts.Although previous studies have reported the synthesis and characterization of the aforementioned catalysts,more still remain in trial and error methods,without in-depth consideration and improvement of traditional synthesis methods.Here,we comprehensively summarize and compare the preparation methods of the trial-and-error synthesis strategy,structure–activity relationships and density functional theory(DFT)guided catalysts rational design for nanomaterials and atomically dispersed catalysts.We also discuss in detail the utilization of the nanomaterials and single atom catalysts for converting small molecules(H_(2)O,O_(2),CO_(2),N_(2),etc.)into value-added products driven by electrocatalysis,photocatalysis,and thermocatalysis.Finally,the challenges and outlooks of mass preparation and production of efficient and green catalysts through conventional trial and error synthesis and DFT theory are featured in accordance with its current development.

关键词： trial-and-error synthesis structure–activity relationships density functional theory(DFT)guidance nanomaterials atomically dispersed catalysts