检索结果-南通市图书馆

Science China(Information Sciences) 2024年第2期67卷 267-278页

作者： Guofang YU Renrong LIANG Haiming zhao Lei XIAO Jie CUI Yue zhao Wenpu CUI Jing WANG Jun XU Jun FU Tianling REN School of Integrated Circuits Tsinghua University beijing National Research Center for Information Science Technology Tsinghua University

Surface acoustic wave(SAW) resonators with an ultrahigh Q-factor are designed and fabricated on silicon-based gallium nitride(GaN/Si). The temperature-dependent performance is characterized over a wide range, from 10 to 500 K. Finite element analysis is employed to guide the design of the SAW resonator from indications of the Rayleigh mode and weak propagation direction dependence of SAW in the c-plane of GaN/Si. The SAW resonator with 100 pairs of interdigital transducers(IDT), 100 pairs of grating reflectors(GR) for each side, aperture size of 80 μm, metallization ratio of 0.5, and electrode width of 500 nm resonates at 1.9133 GHz accordingly with an ultrahigh Q-factor of 7622 at room temperature, which contributes the fr× Qr, up to 14.583×1012Hz. A resonator operating over 10 to 500 K indicates an approximately linear decreasing temperature dependence above 280 K while being approximately constant below 40 K. The fitting to resonator characteristics using the modified butterworth Van Dyke(m bVD) model reveals a reduction in both the electrode and mechanical losses while worsening the dielectric loss with cooling down.

关键词： GaN/Si SAW resonator ultrahigh Q-factor temperature-dependent performance mbVD losses

Understanding Discrepancy of Power System Dynamic Security Assessment with Unknown Faults: A Reliable Transfer Learning-based Method

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2024年第1期10卷 427-431页

作者： Chao Ren Han Yu Yan Xu zhao Yang Dong School of Computer Science and Engineering Nanyang Technological UniversitySingapore School of Electrical and Electronic Engineering Nanyang Technological UniversitySingapore

This letter proposes a reliable transfer learning(RTL)method for pre-fault dynamic security assessment(DSA)in power systems to improve DSA performance in the presence of potentially related unknown *** takes individual discrepancies into consideration and can handle unknown faults with incomplete *** experiment results demonstrate high DSA accuracy and computational efficiency of the proposed RTL *** analysis shows RTL can guarantee system performance.

关键词： Adversarial training dynamic security assessment maximum classifier discrepancy missing data transfer learning

Impacts of inter-satellite links on the ECOM model performance for bDS-3 MEO satellites

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Satellite Navigation 2024年第1期5卷 140-154页

作者： Chao Yang Jing Guo Xiaolong Xu Longyu Wang Qile zhao GNSS Research Center Wuhan UniversityNo.129 Luoyu RoadWuhan430079China

Inter-satellite link(ISL)plays an essential role in current and future Global Navigation Satellite System(GNSS).In this study,we investigate the impact of ISL observations on precise orbit determination for beiDou-3 Navigation Satellite System(bDS-3)Medium Earth Orbit(MEO)satellites based on different Extended CODE Orbit Models(ECOM).Thanks to the better observation geometry of the Ka-band ISL data compared to the L-band data for bDS-3 MEO satellites,the ISL solution substantially reduces Orbit boundary Discontinuity(ObD)errors,except for C30,which suffers from unstable Ka-band hardware *** the external quality analysis,ISL significantly enhances the reliability of the orbit of MEO satellites manufactured by the China Academy of Space Technology(CAST).The standard deviation(STD)of the satellite laser ranging(SLR)residuals is approximately 2.5 cm,and the root mean square(RMS)is reduced by 10–23%compared to L-band ***,the Sun-elongation angle dependent systematic error in SLR residuals nearly vanishes based on the reduced 5-parameter ECOM(ECOM1)or extended 7-parameter ECOM(ECOM2)with ISL *** is because the ISL reduces the correlation between state parameters and solar radiation pressure(SRP)parameters as well as those among SRP parameters,leading to a more accurate estimation of both orbit and SRP perturbations,particularly those along b *** confirms that the deficiency of the SRP models for bDS-3 CAST satellites can be compensated by using better observation geometry from ISL *** the other hand,for the satellite manufactured by Shanghai Engineering Center for Microsatellites(SECM),the ISL allows for a more accurate estimation of the bc_(1)parameter in the ECOM1 *** only reduces linear systematic error,possibly because the impact generated by the satellite bus cannot be entirely absorbed by the b-direction parameters.

关键词： bDS-3 MEO Inter-satellite link Solar radiation pressure ECOM

Intermetallic Compounds Formation in Dissimilar Friction Stir Welding of Mg/Cu Alloys

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第9期37卷 1523-1532页

作者： Xue Li Qingzhen zhao Hao Su Ji Chen Chuansong Wu MOE Key Lab for Liquid-Solid Structure Evolution and Materials Processing Institute of Materials JoiningShandong UniversityJinan250061China

Joining dissimilar Mg/Cu alloys was still an intractable problem because of the excessive intermetallic compounds(IMCs)and poor mechanical properties using conventional welding *** the present study,friction stir welding was employed for the butt joining of dissimilar AZ31b Mg-alloy and T2 pure Cu ***-free Mg/Cu joints were obtained with Mg-RS and Cu-AS configuration,at a welding speed of 50 mm/min and tool rotating speeds of 325 r/min,625 r/min and 925 r/*** the joining interface,both Mg_(2)Cu and MgCu_(2) IMC phases were observed,with a clear,uniform and continuous IMCs layer composed of two sub-layers,layer-A of Mg+Mg_(2)Cu and layer-b of Mg_(2)Cu+MgCu_(2).The maximum ultimate tensile strength of the Mg/Cu friction stir welding joint reached 130 MPa at 925 r/min due to enhanced mechanical interlocking between Mg and Cu,as well as sufficient metallurgical bonding at the joining interface with an IMCs layer thickness in the range of 1.0-2.0μm.

关键词： Friction stir welding Magnesium Copper Intermetallic compounds Mechanical properties

In Situ Growth of 2D Metal–Organic Framework Ion Sieve Interphase for Reversible Zinc Anodes

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第6期7卷 158-166页

作者： Jing Sun Qinping Jian bin Liu Pengzhu Lin Tianshou zhao Department of Mechanical and Aerospace Engineering The Hong Kong University of Science and TechnologyClear Water BayKowloonHong Kong SARChina Department of Mechanical and Energy Engineering Southern University of Science and TechnologyShenzhen 518055China

Zinc metal anodes are gaining popularity in aqueous electrochemical energy storage systems for their high safety,cost-effectiveness,and high ***,the service life of zinc metal anodes is severely constrained by critical challenges,including dendrites,water-induced hydrogen evolution,and *** this study,a protective two-dimensional metal–organic framework interphase is in situ constructed on the zinc anode surface with a novel gel vapor deposition *** ultrathin interphase layer(~1μm)is made of layer-stacking 2D nanosheets with angstrom-level pores of around 2.1Å,which serves as an ion sieve to reject large solvent–ion pairs while homogenizes the transport of partially desolvated zinc ions,contributing to a uniform and highly reversible zinc *** the shielding of the interphase layer,an ultra-stable zinc plating/stripping is achieved in symmetric cells with cycling over 1000 h at 0.5 mA cm−2 and~700 h at 1 mA cm^(−2),far exceeding that of the bare zinc anodes(250 and 70 h).Furthermore,as a proof-of-concept demonstration,the full cell paired with MnO_(2) cathode demonstrates improved rate performances and stable cycling(1200 cycles at 1 A g−1).This work provides fresh insights into interphase design to promote the performance of zinc metal anodes.

关键词： 2D MOF desolvation interphase ion sieve zinc anode

Preparation and properties of Ti_(3)SiC(2) -based corrosion mitigation coatings for SiC_(f) /SiC PWR accident tolerant fuel cladding

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Advanced Ceramics 2024年第1期13卷 73-85页

作者： Jinsong Yang Fang Ye Laifei Cheng Kai zhao Yucong Wei Science and Technology on Thermostructural Composite Materials Laboratory Northwestern Polytechnical UniversityXi’an 710072China

To enhance the resistance of SiC_(f)/SiC to hydrothermal corrosion in the pressurized water reactor(PWR)environment,structurally tunable Ti_(3)SiC(2)-based corrosion mitigation coatings for SiC_(f)/SiC were prepared using molten salt *** influence of various process parameters,such as Si/Ti molar ratio in raw materials,annealing time,and annealing temperature,on the phase composition and the structure of the coatings was *** the process control,the fabricated coatings can be either Ti_(3)SiC(2) monolithic structure or TiC/Ti_(3)SiC(2) and TiC/Ti_(3)SiC(2)/Ti_(5)Si_(3)C_(x) multilayered *** coatings demonstrate strong bonding to the substrate due to in-situ reaction,exhibiting tensile and shear strength of at least 26.9 and 30.8 MPa,*** TiC as a transition layer further enhances the tensile and shear strength to 41.3 and 51.4 MPa,*** Ti_(3)SiC(2) coatings enhance the thermal conductivity of SiC_(f)/SiC by 10%–12%.Notably,Ti_(3)SiC(2) coatings effectively protect SiC_(f)/SiC from hydrothermal corrosion,demonstrating an 83%strength retention rate compared to 71%in the control group after ***,the Ti5Si3Cx layer exhibits unsatisfactory corrosion *** Ti_(3)SiC(2) monolithic coating has higher thermal conductivity,TiC/Ti_(3)SiC(2) multi-layered coating has higher bonding strength,and both have desirable resistance to the hydrothermal corrosion.

关键词： Ti_(3)SiC(2) SiC_(f)/SiC nuclear materials hydrothermal corrosion coating

Cooperation between single atom catalyst and support to promote nitrogen electroreduction to ammonia:A theoretical insight

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第9期96卷 336-344页

作者： Wanying Guo Siyao Wang Hongxia Wang Qinghai Cai Jingxiang zhao College of Chemistry and Chemical Engineering Harbin Normal UniversityHarbin 150025HeilongjiangChina

The co-catalysis between single atom catalyst(SAC)and its support has recently emerged as a promising strategy to synergistically boost the catalytic activity of some complex electrochemical reactions,encompassing multiple intermediates and ***,we utilized defective bC_(3)monolayer-supported SACs as a prototype to investigate the cooperative effects of SACs and their support on the catalytic performance of the nitrogen reduction reaction(NRR)for ammonia(NH_(3))*** results showed that these SACs can be firmly stabilized on these defective bC_(3)supports with high stability against ***,co-activation of the inert N_(2)reactant was observed in certain embedded SACs and their neighboring b atoms on certain bC3 sheets due to the noticeable charge transfer and significant N–N bond *** high-throughput screening revealed that the Mo/DV_(CC)and W/DV_(CC)exhibit superior NRR catalytic performance,characterized by a low limiting potential of−0.33 and−0.43 V,respectively,which can be further increased under acid conditions based on the constant potential ***,varying NRR catalytic activities can be attributed to the differences in the valence state of active ***,further microkinetic modeling analysis displayed that the turnover frequency of N_(2)–to–NH_(3)conversion on Mo/DV_(CC)is as large as 1.20×10^(−3)s^(−1)site^(−1) at 700 K and 100 bar,thus guaranteeing its ultra-fast reaction *** results not only suggest promising advanced electrocatalysts for NRR but also offer an effective avenue to regulate the electrocatalytic performance via the co-catalytic metal–support interactions.

关键词： Co-catalysis Single atom catalyst Nitrogen reduction DFT computations

维普期刊数据库

Robust fixed-time flight controller for a dual-system convertible UAV in the cruise mode

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第9期39卷 53-66页

作者： Lulu Chen Zhenbao Liu Qingqing Dang Wen zhao Wenyu Chen School of Civil Aviation Northwestern Polytechnical UniversityXi'an 710072China Shenzhen Research Institute of Northwestern Polytechnical University Shenzhen 518057China Air and Missile Defense College Air Force Engineering UniversityXi'an 710051China

This paper investigates the attitude tracking control problem for the cruise mode of a dual-system convertible unmanned aerial vehicle(UAV)in the presence of parameter uncertainties,unmodeled uncertainties and wind ***,a fixed-time disturbance observer(FXDO)based on the bi-limit homogeneity theory is designed to estimate the lumped disturbance of the convertible UAV ***,a fixed-time integral sliding mode control(FXISMC)is combined with the FXDO to achieve strong robustness and chattering ***-limit homogeneity theory and Lyapunov theory are applied to provide detailed proof of the fixed-time ***,numerical simulation experimental results verify the robustness of the proposed algorithm to model parameter uncertainties and wind *** addition,the proposed algorithm is deployed in a open-source UAV autopilot and its effectiveness is further demonstrated by hardware-in-the-loop experimental results.

关键词： Convertible UAV Flight control Disturbance observer Fixed-time control

维普期刊数据库

On traceable iterated line graph and hamiltonian path index

在线全文

学校读者我要写书评

暂无评论

Applied Mathematics(A Journal of Chinese Universities) 2024年第2期39卷 239-252页

作者： NIU zhao-hong XIONG Li-ming YANG Wei-hua School of Mathematical Sciences Shanxi UniversityTaiyuan 030006China School of Mathematics and Statistics Beijing Key Laboratory on MCAACIBeijing Institute of TechnologyBeijing 100081China Department of Mathematics Taiyuan University of TechnologyTaiyuan 030024China

Xiong and Liu[21]gave a characterization of the graphs G for which the n-iterated line graph L^(n)(G)is hamiltonian,for n≥*** this paper,we study the existence of a hamiltonian path in L^(n)(G),and give a characterization of G for which L^(n)(G)has a hamiltonian *** applications,we use this characterization to give several upper bounds on the hamiltonian path index of a graph.

关键词： iterated line graph traceable hamiltonian index hamiltonian path index

维普期刊数据库

biomimetic Erythrocyte-Like Particles from Microfluidic Electrospray for Tissue Engineering

在线全文

学校读者我要写书评

暂无评论

Engineering 2024年第9期40卷 78-86页

作者： Zhiqiang Luo Lijun Cai Hanxu Chen Guopu Chen Yuanjin zhao Department of Rheumatology and Immunology Nanjing Drum Tower HospitalSchool of Biological Science and Medical EngineeringSoutheast UniversityNanjing 210096China Oujiang Laboratory(Zhejiang Lab for Regenerative Medicine Vision and Brain Health)Wenzhou InstituteUniversity of Chinese Academy of SciencesWenzhou 325001China

Microparticles have demonstrated value for regenerative *** in this field tend to focus on the development of intelligent multifunctional microparticles for tissue ***,inspired by erythrocytes-associated self-repairing process in damaged tissue,we present novel biomimetic erythrocyte-like microparticles(ELMPs).These ELMPs,which are composed of extracellular matrix-like hybrid hydrogels and the functional additives of black phosphorus,hemoglobin,and growth factors(GFs),are generated by using a microfluidic *** the resultant ELMPs have the capacity for oxygen delivery and near-infrared-responsive release of both GFs and oxygen,they would have excellent biocompatibility and multifunctional performance when serving as microscaffolds for cell adhesion,stimulating angiogenesis,and adjusting the release profile of *** on these features,we demonstrate that the ELMPs can stably overlap to fill a wound and realize controllable cargo release to achieve the desired curative effect of tissue ***,we consider our biomimetic ELMPs with discoid morphology and cargo-delivery capacity to be ideal for tissue engineering.

关键词： biomimetics Erythrocyte Tissue engineering Microfluidics Electrospray Oxygen delivery