检索结果-南通市图书馆

Optimizing electronic structure of Mo_(2)TiC_(2)T_(x) MXene through Nb doping for enhanced electrochemical performance

引用

Nano Research 2024年第8期17卷 7174-7181页

作者： Jingyuan Zhao wenzheng yan Zhaoxi Liu Xiaobin Liu Yapeng Tian Xinwei Cui Henan Institute of Advanced Technology College of Materials Science and EngineeringZhengzhou UniversityZhengzhou 450003China College of Physics and Electronic Information Engineering Guilin University of TechnologyGuilin 514004China

MXene is a promising electrode material for both high volumetric capacitance and high-rate performance in ***,the current study has mainly focused on the monometallic element Ti_(3)C_(2)T_(x) MXene until now,while the bimetallic and multimetallic MXene have received comparatively less *** this work,we demonstrate that the electronic structure of the Mo_(2)TiC_(2)T_(x) MXene could be regulated by fine-tuning the content of doped Nb *** enhanced electron cloud density of surface–O termination and the electron spin of the Mo atoms in the Mo_(2)TiC_(2)T_(x) MXene,leads to the boost of electric double-layer capacitor(EDLC)and improvement of *** a consequence,the electrochemical performance of Nb-doped Mo_(2)TiC_(2)T_(x) MXene(Nb-0.3-MXene)demonstrates a capacitance of 398 F·cm^(−3),roughly doubling that of the pristine Mo_(2)TiC_(2)T_(x) MXene electrode at 197 F·cm^(−3) in the 3 M H_(2)SO_(4) *** the same time,the Nb-0.3-MXene could even maintain a capacitance of 82.75% at 200 mV·s−1,with high cyclic stability for 19,000 cycles at 10 A·g−***,Nb-0.3-MXene-based hybrid supercapacitors deliver a remarkable volumetric energy density of 48.1 W·h·L^(−1)at 230.7 W·L^(−1),and 34.4 W·h·L^(−1)at a high power density of 82.6 kW·L^(−1).There exists a balance between the volumetric capacitance and rate performance with different ratios of Nb atoms in the Nb-doped MXene due to the strong interaction between the Nb-doped MXene and the intercalated ***,optimizing the electronic structure of MXene through heteroatom doping is of great potential for enhanced supercapacitor performance.

关键词： niobium doping electronic structure Mo_(2)TiC_(2)T_(x)MXene electron spin rate performance volumetric capacitance

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

稀土选育枯草芽孢杆菌1.108高产木聚糖酶菌株的研究

引用

内蒙古工业大学学报（自然科学版） 2024年第3期43卷 224-228页

作者：肖蕴澍闫文正李永丽刘占英胡建华内蒙古工业大学化工学院呼和浩特010051 内蒙古工业大学内蒙古自治区发酵产业节能减排工程技术研究中心呼和浩特010051 内蒙古工业大学生物发酵绿色制造内蒙古自治区工程研究中心呼和浩特010051

论文考察了稀土离子对枯草芽孢杆菌1.108液态发酵产木聚糖酶的影响,以期选育高产木聚糖酶的枯草芽孢杆菌。结果表明,于0~6 h时添加1×10^(-4) mol/L的Er^(3+),30℃液态发酵12 h,木聚糖酶活达到133.79 U/mL,获得一株木聚糖酶高产菌Bacill... 详细信息

论文考察了稀土离子对枯草芽孢杆菌1.108液态发酵产木聚糖酶的影响,以期选育高产木聚糖酶的枯草芽孢杆菌。结果表明,于0~6 h时添加1×10^(-4) mol/L的Er^(3+),30℃液态发酵12 h,木聚糖酶活达到133.79 U/mL,获得一株木聚糖酶高产菌Bacillus subtilis X-Er,与原始菌株相比提高10.48%;连续传代培养8次,木聚糖酶活力没有显著变化,表明菌株具有良好的遗传稳定性;电镜结果发现Er^(3+)的加入使该菌细胞壁的通透性增大,推测这可能是木聚糖酶活增加的原因之一。

关键词：木聚糖酶枯草芽孢杆菌稀土选育

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

A peak enhancement of frequency response of waveguide integrated silicon-based germanium avalanche photodetector

引用

Journal of Semiconductors 2024年第7期45卷 61-68页

作者： Linkai Yi Daoqun Liu wenzheng Cheng Daimo Li Guoqi Zhou Peng Zhang Bo Tang Bin Li Wenwu Wang yan yang Zhihua Li Institute of Microelectronics Chinese Academy of SciencesBeijing 100029China School of Electronic Electrical and Communication Engineering University of Chinese Academy of SciencesBeijing 100049China

Avalanche photodetectors(APDs) featuring an avalanche multiplication region are vital for reaching high sensitivity and responsivity in optical transceivers. Waveguide-coupled Ge-on-Si separate absorption, charge, and multiplication(SACM)APDs are popular due to their straightforward fabrication process, low optical propagation loss, and high detection sensitivity in optical communications. This paper introduces a lateral SACM Ge-on-Si APD on a silicon-on-insulator(SOI) wafer, featuring a 10 μm-long, 0.5 μm-wide Ge layer at 1310 nm on a standard 8-inch silicon photonics platform. The dark current measures approximately 38.6 μA at-21 V, indicating a breakdown voltage greater than-21 V for the device. The APDs exhibit a unitgain responsivity of 0.5 A/W at-10 V. At-15 V, their responsivity reaches 2.98 and 2.91 A/W with input powers of-10 and-25 dBm, respectively. The device's 3-dB bandwidth is 15 GHz with an input power of-15 dBm and a gain is 11.68. Experimental results show a peak in impedance at high bias voltages, attributed to inductor and capacitor(LC) circuit resonance, enhancing frequency response. Furthermore, 20 Gbps eye diagrams at-21 V and-9 dBm input power reveal signal to noise ratio(SNRs) of 5.30. This lateral SACM APD, compatible with the stand complementary metal oxide semiconductor(CMOS) process,shows that utilizing the peaking effect at low optical power increases bandwidth.

关键词： photodetectors optical communications responsivity 3-dB bandwidth

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Towards Data-Driving Multi-View Evaluation Framework for Scratch

引用

Tsinghua Science and Technology 2024年第2期29卷 517-528页

作者： Xiaolin Chai yan Sun yan Gao Department of Computer Science Beijing University of Posts and TelecommunicationBeijing 100876China Intellectual Property Institute Shandong Polytechnic CollegeJining 272067China

As one of the most popular visual programming languages,Scratch has a lot of evaluation around *** evaluation can help programmers understand their projects *** the same time,it can also provide a reference for them to browse other projects in the online *** of the existing evaluations on Scratch are carried from three perspectives:Computational Thinking(CT)ability,visual presentation aesthetics,and code *** them,the assessment of CT and code quality is mainly carried out from the program script,while the evaluation of visual aesthetics is analyzed from the perspective of image sequences generated by project *** single-view evaluation focuses on the performance of a program in a certain aspect and is *** this paper,we propose a multi-view evaluation framework to integrate various evaluations using different *** quantitatively analyze the assessment of different views driven by *** with overall evaluations that represent human opinions,we analyze their differences and *** experiments,we determine the weights of different integration policies,the proposed multi-view evaluation method can generate evaluation results similar to human opinions.

关键词： Scratch Computational Thinking(CT) visual aesthetic static analysis integration policy machine learning

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Forward to the Special Topic on“Solving Differential Equations with Deep Learning”

引用

Journal of Systems Science & Complexity 2024年第2期37卷 389-390页

作者： yan Zhenya Academy of Mathematics and Systems Science Chinese Academy of SciencesBeijing 100190China

The concept of artificial intelligence(AI)was first presented at the Dartmouth SummerResearch Project on AI hosted by McCarthy and Minsky in *** that,the developmentof AI has experienced ups and downs due to some limited conditions including intelligentcomputing techniques,computer and hardware and software^([1,2]).In particular,with the rapidof deep artificial neural networks,machine learning(ML)and deep learning(DL)techniques^([3,4])have been applied in many fields of science and engineering,including machine translation,image recognition,genomics,scientific computing and atmospheric science,etc^([5]).

关键词： has artificial hardware

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Large eddy simulation study of 3D wind field in a complex mountainous area under different boundary conditions

引用

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2024年第7期25卷 541-556页

作者： yan LI Lei yan Xuhui HE School of Civil Engineering Central South UniversityChangsha410075China National Engineering Research Center for High-speed Railway Construction Changsha410075China Hunan Provincial Key Laboratory for Disaster Prevention and Mitigation of Rail Transit Engineering Structures Changsha410075China

Large eddy simulations generally are used to predict 3D wind field characteristics in complex mountainous *** simulation boundary conditions,such as the height and length of the computational domain or the characteristics of inflow turbulence,can significantly impact the quality of *** this study,we examined these boundary conditions within the context of the mountainous terrain around a long-span cable-stayed bridge using a wind tunnel *** sizes of computational domains and turbulent incoming wind velocities were used in large eddy *** results show that when the height of the computational domain is five times greater than the height of the terrain model,there is minimal influence from the top wall on the wind field characteristics in this complex mountainous *** the length of the wake region of the computational domain has negligible effects on the wind *** in the inlet boundary reduces the length of the wake region on a leeward hill with a low slope,but has less impact on the mean wind velocity of steep hills.

关键词： Large eddy simulation(LES) Spectral representation method Recycling method High mountainous canyon Wind characteristics Atmospheric boundary layer Computational domain

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Electromagnetic characteristic analysis and design of a linear motor used for ultra-high-speed EMS maglev train

引用

Science China(Technological Sciences) 2024年第6期67卷 1957-1973页

作者： GAO Han SHI TingNa GAO XinMai LEI yanXiao yan Dong GUO Liyan yan yan College of Electrical Engineering Zhejiang UniversityHangzhou310027China Zhejiang University Advanced Electrical Equipment Innovation Center Hangzhou311107China State Key Laboratory of High-speed Maglev Transportation Technology Qingdao266100China CRRC Qingdao Sifang Co.Ltd. Qingdao266111China

The operating speed of the commercial electromagnetic suspension(EMS)maglev train has been over 430 km/h,making it the fastest means of land *** the increasing demands of people traveling,it is necessary to further improve the operating speed of maglev *** to examine whether the existing EMS system can meet the requirements of ultra-highspeed operation(more than 600 km/h),the electromagnetic characteristics of an EMS linear motor under the operating speed of 600–1000 km/h fed by a square-wave voltage supply is investigated in this ***,an electromagnetic field model of the EMS system under the square-wave voltage supply is established to investigate its electromagnetic performance,e.g.,the characteristics of phase current,the magnetic flux density,and the electromagnetic ***,the relationship between the harmonic components of the air-gap magnetic flux density and electromagnetic force is investigated using the two-dimensional fast Fourier transform(2D-FFT)to reveal the mechanism of electromagnetic force ***,to address the issues of excessive armature current density and significant electromagnetic force ripple,the linear motor is re-designed by enlarging the stator slot area and reshaping the mover's main magnetic ***,the Taguchi method is used to further improve the electromagnetic characteristics of the linear electric ***,the effectiveness of the proposed optimal design is validated by the finite-element analysis(FEA)based co-simulation.

关键词： ultra-high-speed maglev transportation electromagnetic suspension(EMS) linear motor electromagnetic force ripple suppression

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Thermal and mechanical behavior of casting copper alloy wheel during wheel and belt continuous casting process

引用

China Foundry 2024年第1期21卷 82-90页

作者： Kun Gao yan Peng School of Mechanical Engineering Yanshan UniversityQinhuangdao 066004HebeiChina

To investigate the thermal and mechanical behavior of casting wheel,a two-dimensional thermoelastic-plastic finite element model was used to predict the temperature,stress and distortion distribution of the casting wheel during the wheel and belt continuous casting *** effects of grinding thickness and casting speed on the thermal and mechanical behaviors of the center of the hot face of the casting wheel were discussed in *** each rotation,the casting wheel passes through four different spray *** results show that the temperature distribution of the casting wheel in different spray zones is similar,the temperature of the hot face is the highest and the temperature reaches the peak in the spray zoneⅢ.The stress and distortion depend on the temperature distribution,and the maximum stress and distortion of the hot face are 358.2 MPa and 1.82 mm,*** temperature at the center of the hot face decreases with increasing grinding thickness and increases with increasing casting speed.

关键词： casting wheel finite element model grinding thickness casting speed hot face spray zones

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Research on Modeling and Parameter Identification of Comprehensive Load Model of Distribution Network in Industrial Park

引用

Chinese Journal of Electronics 2024年第1期33卷 264-273页

作者： Tingling WANG Xiaohe yan School of Electric Engineering North China University of Water Resources and Electric Power Wenzhou Polytechnic

With the rapid development of industrial parks, its load model research has become a hot spot. In order to study the load of power system in industrial park, based on the characteristics of the industrial park load, a comprehensive load admittance static model with full voltage range adaptability is considered, and a comprehensive load model of distribution network of the industrial park is established. A complete parameter identification of the model is carried out through chaos particle swarm optimization. The simulation results show that the model can effectively describe the load characteristics of the distribution network in industrial parks.

关键词： Chaos Adaptation models Analytical models Parameter estimation Induction motors Simulation Distribution networks

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Numerical simulation of fluid flow and free surface fluctuations during wheel and belt casting process

引用

Journal of Iron and Steel Research International 2024年第5期31卷 1117-1126页

作者： Kun Gao yan Peng National Engineering Research Center for Equipment and Technology of Cold Strip Rolling Yanshan UniversityQinhuangdao066004HebeiChina

The unstable fluid flow and severe free surface fluctuations in the wheel and belt caster can affect the quality of the cast *** lower level height tends to entrap inclusions in the molten *** the other hand,the higher level height makes the production process more dangerous due to the overflow of high temperature fluid from the mold.A computational model of the molten metal pouring process was *** transient fluid flow and free surface fluctuations behavior were calculated using the three-dimensional large eddy simulation model and the volume of fluid *** results show that the flow velocity of the main jet gradually decreases under the influence of the low kinetic energy fluid in the *** is an obvious oscillation in the tail of the jet,while the flow field is asymmetric in *** jet is closer to the inside radius side due to the Coanda effect,and there is a recirculation zone on the inside radius and the outside radius respectively,according to the 10 s time-averaged *** with the industrial observation and simulation results,the shape of the free surface is a wave that varies with *** addition,the free surface height is lowest and the flow velocity is highest in the region near the jet.

关键词： Fluid flow Free surface Wheel and belt caster Large eddy simulation Volume of fluid method

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：