检索结果-南通市图书馆

Carbon Energy 2024年第3期6卷 204-214页

作者： Bin Liu Jie Liu Cheng Zhong wenbin hu Key Laboratory of Advanced Ceramics and Machining Technology(Ministry of Education) School of Materials Science and EngineeringTianjin UniversityTianjinChina Tianjin Key Laboratory of Composite and Functional Materials School of Materials Science and EngineeringTianjin UniversityTianjinChina Joint School of National University of Singapore and Tianjin University TianjinChina International Campus of Tianjin University Binhai New CityFuzhouChina

Silicon suboxide(SiO_(x),x≈1)is promising in serving as an anode material for lithium-ion batteries with high capacity,but it has a low initial Coulombic efficiency(ICE)due to the irreversible formation of lithium silicates during the first *** this work,we modify SiO_(x) by solid-phase Mg doping reaction using low-cost Mg powder as a reducing *** show that Mg reduces SiO_(2) in SiO_(x) to Si and forms MgSiO_(3) or Mg_(2)SiO_(4).The MgSiO_(3) or Mg_(2)SiO_(4) are mainly distributed on the surface of SiO_(x),which suppresses the irreversible lithium-ion loss and enhances the ICE of SiO_(x).However,the formation of MgSiO_(3) or Mg_(2)SiO_(4) also sacrifices the capacity of SiO_(x).Therefore,by controlling the reaction process between Mg and SiO_(x),we can tune the phase composition,proportion,and morphology of the Mg-doped SiO_(x) and manipulate the *** obtain samples with a capacity of 1226 mAh g^(–1) and an ICE of 84.12%,which show significant improvement over carbon-coated SiO_(x) without Mg *** the synergistical modification of both Mg doping and prelithiation,the capacity of SiO_(x) is further increased to 1477 mAh g^(–1) with a minimal compromise in the ICE(83.77%).

关键词： initial Coulombic efficiency lithium-ion batteries magnesium doping prelithiation silicon suboxide

How the surface Cu layer affected the activity of Ni foil for alkaline hydrogen evolution

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第2期169卷 11-18页

作者： Qingfeng hu Yuan Liu Xuerong Zheng Jinfeng Zhang Jiajun Wang Xiaopeng Han Yida Deng wenbin hu School of Materials Science and Engineering Key Laboratory of Advanced Ceramics and Machining Technology of Ministry of EducationTianjin UniversityTianjin 300072China State Key Laboratory of Marine Resource Utilization in South China Sea School of Materials Science and EngineeringHainan UniversityHaikou 570228China Joint School of National University of Singapore and Tianjin University International Campus of Tianjin UniversityBinhai New CityFuzhou 350207China

Synthesizing bimetallic nanomaterials,with noble metals as the surface layers and inert metals as the substrates,has been proven to be an effective way to reduce the use of noble metals with maintained catalytic ***,an atomic diffusion from the inert substrate to the surface during the long-term operation has been reported to significantly decrease the *** this work,a series of catalysis-inert Cu-coated Ni foil were fabricated through electrodeposition and their activities for alkaline hydrogen evolution were ***,the Ni/Cu-60 sample showed a similar catalytic property with pure Ni foil and only a slight decrease in HER activity was *** X-ray photoelectron spectroscopy(XPS)results indicated a decreased electron concentration of Cu in Ni/Cu-60,and theoretical calculations further demonstrated the electron transfer between the Ni substrate and Cu *** results reveal that a specific composition or structure of an inert metal layer might not significantly decrease the electrocatalytic activity of active ***,there are more possibilities for the rational design of metal-based catalysts for electrocatalysis.

关键词： Bimetallic heterostructure Charge redistribution Water splitting Alkaline hydrogen evolution

A Novel Approach for Rapid Evaluating Cavitation Erosion Resistance of Metallic Materials

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第7期37卷 1231-1237页

作者： Yu Li Zhenbo Qin Xiaoyang Du Da-Hai Xia Zepeng Gao Yiwen Zhang Zhong Wu wenbin hu Tianjin Key Laboratory of Composite and Functional Materials School of Materials Science and EngineeringTianjin UniversityTianjin300072China Key Laboratory of Advanced Ceramics and Machining Technology(Ministry of Education) Tianjin UniversityTianjin300072China Joint School of National University of Singapore and Tianjin University International Campus of Tianjin UniversityFuzhou350207China

For the evaluation of cavitation erosion resistance of metallic materials,it has always been a time-consuming technical *** paper innovatively proposed a parameter named cavitation hardening rate to characterize the plastic deformation and work hardening behavior of metallic materials during the cavitation process and then found a positive correlation between cavitation hardening rate and strain hardening ***,the relationship between cavitation volume loss and strain hardening index was obtained,and a simple and rapid evaluation method for cavitation erosion resistance was established.

关键词： Cavitation erosion Evaluation method Cavitation hardening rate Volume loss

Boosting cycling stability by regulating surface oxygen vacancies of LNMO by rapid calcination

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第4期17卷 2671-2677页

作者： Haoran Jiang Cuihua Zeng Wei Zhu Jiawei Luo Zhedong Liu Jingchao Zhang Rui Liu Yunhua Xu Yanan Chen wenbin hu School of Materials Science and Engineering Tianjin UniversityTianjin 300072China School of Materials Science and Engineering Shandong University of Science and TechnologyQingdao 266590China

Spinel LiNi_(0.5-x)Mn_(1.5+x)O_(4)(LNMO)has attracted intensive interest for lithium-ion battery due to its high voltage and high energy ***,severe capacity fade attributed to unstable surface structure has hampered its *** vacancies(OVs)tend to occur in the surface of the material and lead to surface structure reconstruction,which deteriorates the battery performance during electrochemical ***,we utilize high-temperature-shock(HTS)method to synthesize LNMO materials with fewer surface *** calcination drives lower surface OVs concentration,reducing the content of Mn^(3+)and surface reconstruction layers,which is beneficial to obtain a stable crystal *** LNMO material synthesized by HTS method delivers an initial capacity of 127 mAh·g^(-1) at 0.1 C and capacity retention of 81.6%after 300 cycles at 1 C,and exhibits excellent performance at low temperature.

关键词： ultrafast synthesis oxygen vacancy LiNi_(0.5-x)Mn_(1.5+x)O_(4)(LNMO)cathode high-temperature-shock lithium-ion batteries

Sulfate-assisted Ni/Fe-based electrodes for anion exchange membrane saline splitting

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano Research 2024年第7期17卷 5985-5995页

作者： Yujun Han Li Shao Yuhang Liu Guodong Li Tongzhou Wang Xuerong Zheng Jihong Li Xiaopeng Han wenbin hu Yida Deng School of Materials Science and Engineering Key Laboratory of Advanced Ceramics and Machining Technology of Ministry of EducationTianjin UniversityTianjin 300072China State Key Laboratory of Marine Resource Utilization in South China Sea School of Materials Science and EngineeringHainan UniversityHaikou 570228China State Key Laboratory of Inorganic Synthesis and Preparative Chemistry College of ChemistryJilin UniversityChangchun 130012China Key Laboratory of Advanced Energy Materials Chemistry(Ministry of Education) Nankai UniversityTianjin 300071China

Saline water electrolysis is an appealing strategy for hydrogen production,attracting more attention in recent ***-based electrodes exhibit promise as catalysts for saline water ***,they suffer from the inferior service life of the oxygen evolution reaction(OER).Herein,we report an oxygen-evolution electrode consisting of a sulfate-modulated nickel-iron hydroxide(NiFeOOH)affording as the catalytic active layer and Fe-Ni3S2 as the corrosion-proof *** developed electrode only requires overpotentials of 220 and 292 mV to deliver the current density of 10 and 500 mA·cm^(−2),*** importantly,it presents long-term stability exceeding 140 and 100 h in 1 M KOH at high current densities of 500 and 1000 mA·cm^(−2),respectively,as well as 120 h for saline water electrolysis at 100 mA·cm^(−2).Experimental results reveal that the generated sulfate plays an indispensable role in improving stability and corrosion *** assembled and tested an anion exchange membrane electrolyzer with Pt/C and NiFeS/NIF as the cathode and anode,respectively,under industrial *** overall water-splitting electrolyzer achieves an impressive energy conversion efficiency of 75%±0.5%.This report offers fresh insights into the design of stable NiFe-based electrodes,which may further promote its practical applications for saline water electrolysis.

关键词： saline water electrolysis oxygen evolution reaction anode material water splitting

Approaching Ultimate Synthesis Reaction Rate of Ni-Rich Layered Cathodes for Lithium-Ion Batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第10期16卷 392-402页

作者： Zhedong Liu Jingchao Zhang Jiawei Luo Zhaoxin Guo Haoran Jiang Zekun Li Yuhang Liu Zijing Song Rui Liu Wei-Di Liu wenbin hu Yanan Chen School of Materials Science and Engineering Tianjin UniversityTianjin 300072People's Republic of China School of Materials Science and Engineering Shandong University of Science and TechnologyQingdao 266590People's Republic of China Australian Institute of Bioengineering and Nanotechnology The University of QueenslandSt LuciaQLD 4072Australia

Nickel-rich layered oxide LiNi_(x)Co_(y)MnzO_(2)(NCM,x+y+z=1)is the most promising cathode material for high-energy lithium-ion ***,conventional synthesis methods are limited by the slow heating rate,sluggish reaction dynamics,high energy consumption,and long reaction *** overcome these chal-lenges,we first employed a high-temperature shock(HTS)strategy for fast synthesis of the NCM,and the approaching ultimate reaction rate of solid phase transition is deeply investigated for the first *** the HTS process,ultrafast average reaction rate of phase transition from Ni_(0.6)Co_(0.2)Mn_(0.2)(OH)_(2) to Li-containing oxides is 66.7(%s^(-1)),that is,taking only 1.5 *** ultrahigh heating rate leads to fast reaction kinetics,which induces the rapid phase transition of NCM *** HTS-synthesized nickel-rich layered oxides perform good cycling performances(94%for NCM523,94%for NCM622,and 80%for NCM811 after 200 cycles at 4.3 V).These findings might also assist to pave the way for preparing effectively Ni-rich layered oxides for lithium-ion batteries.

关键词： Nickel-rich layered oxides High-temperature shock Solid reaction kinetics Phase transition Reaction rate

Recovery of cathode copper and ternary precursors from CuS slag derived by waste lithium-ion batteries:Process analysis and evaluation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Chemical Letters 2024年第7期35卷 178-182页

作者： Yun Wei Lei Zhou wenbin hu Liming Yang Guang Yang Chaoqiang Wang hui Shi Fei Han Yufa Feng Xuan Ding Penghui Shao Xubiao Luo National-Local Joint Engineering Research Center of Heavy Metals Pollutants Control and Resource Utilization Nanchang Hangkong UniversityNanchang 330063China School of Life Science Jinggangshan UniversityJi’an 343009China CAS Key Laboratory of Green Process and Engineering National Engineering Research Center of Green Recycling for Strategic Metal ResourcesInstitute of Process EngineeringChinese Academy of SciencesBeijing 100190China Biomass Molecular Engineering Center and Anhui Provincial Key Laboratory of Microbial Pest Control Anhui Agricultural UniversityHefei 230036China Jiangxi Ganfeng Recycling Technology Co.LTD. Xinyu 338004China

The efficient and environmentally friendly recycling technology of waste residue that including abundant heavy metal produced during the recovery of lithium batteries has become a research ***,a novelty process of acid leaching-selective electrodeposition-deep impurity removal-regeneration was proposed to recovery of the CuS slag,which has been efficient transferred to high purity cathode copper and commercially available ternary *** cathode with a purity of 99.67%was prepared under electrochemical reaction conditions at-0.55 V for 2 h.A novel impurity remover-Mn powder,which was used to remove the residual impurities and as a feedstock for the ternary ***,NCM523 was regenerated by *** process is superior to the traditional process in economy,energy consumption,CO_(2)emissions,product purity and process *** study provides a new approach for solid waste recovery and precious metal enrichment.

关键词： CuS slag Electrodeposition Cathode copper Ternary precursor Solid waste recovery

Correlating the crystal structure and facet of indium oxides with their activities for CO_(2)electroreduction

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Fundamental Research 2024年第3期4卷 635-641页

作者： Jiajun Wang Guangjin Wang Han Wu Fei Liu Xixi Ren Yidu Wang Yanhui Cao Qi Lu Xuerong Zheng Xiaopeng Han Yida Deng wenbin hu School of Materials Science and Engineering Key Laboratory of Advanced Ceramics and Machining Technology of Ministry of EducationTianjin UniversityTianjin 300072China School of Materials Science and Energy Engineering Foshan UniversityFoshan 528000China State Key Laboratory of Marine Resource Utilization in South China Sea School of Materials Science and EngineeringHainan UniversityHaikou 570228China Joint School of National University of Singapore and Tianjin University International Campus of Tianjin UniversityBinhai New CityFuzhou 350207China

Constructing structure-function relationships is critical for the rational design and development of efficient catalysts for CO_(2) electroreduction reaction(CO_(2)RR).In_(2)O_(3) is well-known for its specific ability to produce formic ***,how the crystal phase and surface affect the CO_(2)RR activity is still unclear,making it difficult to further improve the intrinsic activity and screen for the most active *** this work,cubic and hexagonal In_(2)O_(3) with different stable surfaces((111)and(110)for cubic,(120)and(104)for hexagonal)are investigated for CO_(2)*** results demonstrate that the adsorption of reactants on cubic In_(2)O_(3) is stronger than that on hexagonal In_(2)O_(3),with the cubic(111)surface being the most active for CO_(2)*** experiments,synthesized cubic In_(2)O_(3) nanosheets with predominantly exposed(111)surfaces exhibited a high HCOO^(-)Faradaic efficiency(87.5%)and HCOO^(–)current density(–16.7 mA cm^(-2))at–0.9 V vs *** addition,an aqueous Zn-CO_(2) battery based on a cubic In2O3 cathode was *** work correlates the phases and surfaces with the CO_(2)RR activity,and provides a fundamental understanding of the structure-function relationship of In_(2)O_(3),thereby contributing to further improvements in its CO_(2)RR ***,the results provide a principle for the directional preparation of materials with optimal phases and surfaces for efficient electrocatalysis.

关键词： Structure-function relationship CO_(2)electroreduction Indium oxide Reactionmechanism Catalyst design

融合交叉注意力的突发事件多模态中文反讽识别模型

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

智能系统学报 2024年第2期19卷 392-400页

作者：胡文彬陈龙黄贤波陈晨仲兆满江苏海洋大学计算机工程学院江苏连云港222005 江苏省海洋资源开发研究院江苏连云港222005

网民在社交媒体参与突发事件讨论时,时常会采用反讽修辞方式表达对事件的看法,此举导致情感分析的难度增加,且已有中文反讽识别对社交媒体中网民发布的多模态评论研究较少,有必要对图文多模态中文反讽识别进行深入研究。运用交叉注意力... 详细信息

网民在社交媒体参与突发事件讨论时,时常会采用反讽修辞方式表达对事件的看法,此举导致情感分析的难度增加,且已有中文反讽识别对社交媒体中网民发布的多模态评论研究较少,有必要对图文多模态中文反讽识别进行深入研究。运用交叉注意力机制捕捉模态间的不一致性表达,提出融合交叉注意力的多模态中文反讽识别模型(fuse cross attention model,FCAM)。在模型中,首先运用TextCNN(text convolutional neural networks)和ResNet(deep residual network)分别提取中文文本浅层特征和图像特征,再运用交叉注意力机制分别得到文本层和图像层的注意力特征,按照残差方式分别实现文本浅层特征和文本层注意力特征的连接、图像特征和图像层注意力特征的连接,使用注意力机制融合2个特征表示,经过分类层得到反讽分类结果。基于某一地区新冠疫情期间相关话题的微博评论数据,构建出突发公共卫生事件多模态中文反讽数据集,在该数据集上试验验证,相较于基准模型,FCAM具有一定的优越性。

关键词：突发事件社交媒体多模态评论中文反讽识别中文反讽数据集交叉注意力机制注意力机制情感分析

MOF膜对金属离子的去除性能及机理研究进展

维普期刊数据库博看期刊

同方期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

膜科学与技术 2024年第2期44卷 198-208页

作者：贺武明胡文彬许辉孔赟长江大学资源与环境学院武汉430100 西安理工大学省部共建西北旱区生态水利国家重点实验室西安710048

金属有机骨架材料(Metal organic frameworks,MOFs)具备高渗透性、高选择性、孔径可调及拓扑结构等特点,在金属离子的吸附、还原方面展现出极大优势,因此被广泛应用于MOF膜合成.本文综述了MOF膜的合成方法及其对金属离子的去除性能,重... 详细信息

金属有机骨架材料(Metal organic frameworks,MOFs)具备高渗透性、高选择性、孔径可调及拓扑结构等特点,在金属离子的吸附、还原方面展现出极大优势,因此被广泛应用于MOF膜合成.本文综述了MOF膜的合成方法及其对金属离子的去除性能,重点探讨了MOF负载量、温度、pH值、膜通量及膜孔径等因素对MOF膜去除金属离子的影响,在此基础上归纳了MOF膜对金属离子的吸附和过滤机理,并对MOF膜在金属离子去除方面的应用前景进行了展望,以期为MOF膜的工程化应用提供参考.

关键词： MOF膜合成方法金属离子吸附过滤影响因素