检索结果-南通市图书馆

Journal of Iron and Steel Research International 2024年第8期31卷 1900-1913页

作者： Jin-wen Song wen Yan Zhe Chen Ying Liu Shao-song Hong The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina National-provincial Joint Engineering Research Center of High Temperature Materials and Lining Technology Wuhan University of Science and TechnologyWuhan 430081HubeiChina Jiangsu Sheng Nai New Materials Co. Ltd.Taizhou 225503JiangsuChina

The effect of nano-carbon black content(O,8 and 12.wt.%)on the wettability of molten steel on Al_(2.O_(3)-C substrates was investigated by the sessile drop wetting method at 1500℃ under argon *** the beginning of the wetting experiment,the contact angle decreased with the increase in nano-carbon black *** the wetting experiment progressed,FeAl_(2.0_(4) layer and sheet Al_(2.O_(3) layer were found at the interface between the molten steel and the Al_(2.O_(3)-C substrates with O and 8 wt.% nano-carbon black content,and the contact angle deceased with *** the content of nano-carbon black was 12.wt.%,a large number of nano-Al_(2.O_(3) whiskers were observed,which made the contact angle between the molten steel and Al_(2.O_(3)-C substrate become *** on the scanning electron microscope and energy dispersive spectrometry results,the formation mechanism of FeAl2.4 layer and Al_(2.O_(3) layer and the interfacial reaction mechanism were proposed.

关键词： Contact angle Nano-carbon black Al_(2.O_(3)-C substrate Molten steel Interfacial reaction

Simplified design of nonlinear damper parameters and seismic responses for long-span cable-stayed bridges with nonlinear viscous dampers

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2024年第7期18卷 1103-1116页

作者： Huihui LI Lifeng LI Rui HU Meng ye College of Civil and Transportation Engineering Shenzhen UniversityShenzhen 518060China Guangdong Provincial Key Laboratory of Durability for Marine Civil Engineering Shenzhen UniversityShenzhen 518060China College of Civil Engineering Hunan UniversityChangsha 410082China

Viscous dampers are widely used as passive energy dissipation devices for long-span cable-stayed bridges for mitigation of seismic load-induced ***,complicated finite element(FE)modeling,together with repetitive and computationally intensive nonlinear time-history analyses(NTHAs)are generally required in conventional design *** streamline the preliminary design process,this paper developed a simplified longitudinal double degree of freedom model(DDFM)for single and symmetric twin-tower cable-stayed *** on the proposed simplified longitudinal DDFM,the analytical equations for the relevant mass-and stiffness-related parameters and longitudinal natural frequencies of the structure were derived by using analytical and energy *** of the relationship between the nonlinear viscous damper parameters and the equivalent damping ratio was achieved through the equivalent linearization ***,the analytical equations of longitudinal seismic responses for long-span cable-stayed bridges with nonlinear viscous dampers were *** on the developed simplified DDFM and suggested analytical equations,this paper proposed a simplified calculation framework to achieve a simplified design method of nonlinear viscous damper ***,the effectiveness and applicability of the developed simplified longitudinal DDFM and the proposed calculation framework were further validated through numerical analysis of a practical cable-stayed ***,the results indicated the following.1)For the obtained fundamental period and longitudinal stiffness,the differences between results of the simplified longitudinal DDFM and numerical analysis were only 2.05%and 1.5%,respectively.2.Relative calculation errors of the longitudinal girder-end displacement and bending moment of the bottom tower section of the bridge obtained from the simplified longitudinal DDFM were limited to less than 2.%.3)The equivalent damping ratio of nonline

关键词： cable-stayed bridges viscous dampers simplified analytical model equivalent damping ratio seismic mitigation

3D coarse-grained DPM simulation of the MIP reaction-regeneration loop

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第6期89卷 57-66页

作者： Yanhao ye Shuai Zhang Ji Xu Wei Ge State Key Laboratory of Mesoscience and Engineering(formerly State Key Laboratory of Multiphase Complex Systems) Institute of Process EngineeringChinese Academy of SciencesBeijing100190China School of Chemical Engineering University of Chinese Academy of SciencesBeijing100049China

The reactor-regenerator loop is the core facility of the maximizing iso-paraffin(MIP)*** the discrete particle method(DPM)simulation can provide detailed information at the particle scale,it has been unable to simulate such a complex loop system due to limitations of coarse-grained(CG)models,computing software,and *** this study,a newly proposed soft-shell CG-DPM model with a CG ratio of up to 800 is used to simulate a 3.5 Mt/a industrial-scale MIP reactor-regenerator *** solid fraction distribution obtained is found to agree well with in-situ *** properties including the distribution of solid fraction,gas and solid velocity,standard derivation of solid fraction with time,temporal distribution of the flow field,and particle residence time distribution are measured in the simulation,which are meaningful to better design and operate such systems in the future.

关键词： Discrete particle method Coarse-grain Maximizing iso-paraffins Full-loop Reaction-regeneration system

Rotor cross-tilt optimization for yaw control improvement of multi-rotor eVTOL aircraft

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第3期37卷 153-167页

作者： Xufei YAN ye YUAN Yanqin ZHAO Renliang CHEN Zhejiang Lab Hangzhou 311100China Department of Aerospace Engineering Swansea UniversitySwanseaWales SA28PPUK National Key Laboratory of Rotorcraft Aeromechanics Nanjing University of Aeronautics and AstronauticsNanjing 210016China

Manned multi-rotor electric Vertical Takeoff and Landing(eVTOL)aircraft is prone to actuator saturation due to its weak yaw control *** address this inherent problem,a rotor cross-tilt configuration is applied in this paper,with an optimization method proposed to improve the overall control efficiency of the ***,a flight dynamics model of a 500-kg manned multi-rotor eVTOL aircraft is *** accuracy of the co-axial rotor model is verified using a single arm test bench,and the accuracy of the flight dynamics model is verified by the flight test ***,an optimization method is designed based on the flight dynamics model to calculate an optimal rotor cross-tilt mounting angle,which not only improves the yaw control efficiency,but also basically maintains the efficiency of other control *** ideal rotor cross-tilt mounting angle for the prototype is determined by comprehensively considering the optimal results with different payloads,forward flight speeds,and rotor mounting angle ***,the feasibility of the rotor cross-tilt mounting angle is proved by analyzing the control derivatives of the flight dynamics model,the test data of a ground three Degree-of-Freedom(3DOF)platform,and the actual flight data of the *** results show that a fixed rotor cross-tilt mounting angle can achieve ideal yaw control effectiveness,improving yaw angle tracking and hold ability,increasing endurance time,and achieving good yaw control performance with different payloads and forward speeds.

关键词： Multi-rotor eVTOL Control efficiency Flight dynamics model Cross-tilt optimization Endurance time

Eigenfrequency analysis of bridges using a smartphone and a novel low-cost accelerometer prototype

在线全文

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2024年第2期18卷 202-215页

作者： Seyedmilad KOMARIZADEHASL ye XIA Mahyad KOMARY Fidel LOZANO Department of Civil and Environment Engineering Universitat Politècnica de CatalunyaBarcelona 08034Spain Department of Bridge Engineering Tongji UniversityShanghai 200092China Department of Civil Engineering Universidad de Castilla-La ManchaCiudad Real 13071Spain

Researchers are paying increasing attention to the development of low-cost and microcontroller-based accelerometers,in order to make structural health monitoring feasible for conventional bridges with limited monitoring *** with the low-cost sensor development,the use of the embedded accelerometers of smartphones for eigenfrequency analysis of bridges is becoming popular in the civil engineering *** paper,for the first time in the literature,studies these two promising technologies by comparing the noise density and eigenfrequency analysis of a self-developed,validated and calibrated low-cost Internet of things based accelerometer LARA(low cost adaptable reliable accelerometer)with those of a state of the art smartphone(iPhone XR).The eigenfrequency analysis of a footbridge in San Sebastian,Spain,showed that the embedded accelerometer of the iPhone XR can measure the natural frequencies of the under study bridge.

关键词： smartphone modal analysis eigenfrequency analysis low-cost accelerometers Arduino Raspberry Internet of things

Numerical simulations for radon migration and exhalation behavior during measuring radon exhalation rate with closed-loop method

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第1期35卷 81-95页

作者： Ming Xia Yong-Jun ye Shu-Yuan Liu School of Resources Environment and Safety Engineering University of South ChinaHengyang 421001China Key Discipline Laboratory for National Defense for Biotechnology in Uranium Mining and Hydrometallurgy University of South ChinaHengyang 421001China

Accurate measurements of the radon exhalation rate help identify and evaluate radon risk regions in the *** these measurement methods,the closed-loop method is frequently ***,traditional experiments are insufficient or cannot analyze the radon migration and exhalation patterns at the gas–solid interface in the accumulation *** CFD-based technique was applied to predict the radon concentration distribution in a limited space,allowing radon accumulation and exhalation inside the chamber intuitively and *** this study,three radon exhalation rates were defined,and two structural ventilation tubes were designed for the *** consistency of the simulated results with the variation in the radon exhalation rate in a previous experiment or analytical solution was *** effects of the vent tube structure and flow rate on the radon uniformity in the chamber;permeability,insertion depth,and flow rate on the radon exhalation rate and the effective diffusion coefficient on back-diffusion were *** on the results,increasing the inser-tion depth from 1 to 5 cm decreased the effective decay constant by 19.55%,whereas the curve-fitted radon exhalation rate decreased(lower than the initial value)as the deviation from the initial value increased by approximately 7%.Increasing the effective diffusion coefficient from 2.77×10^(-7) to 7.77×10^(-6) m^(2. s^(-1) made the deviation expand from 2.14 to 15.96%.The conclusion is that an increased insertion depth helps reduce leakage in the chamber,subject to notable back-diffusion,and that the closed-loop method is reasonably used for porous media with a low effective diffusion coefficient in view of the back-diffusion *** CFD-based simulation is expected to provide guidance for the optimization of the radon exhalation rate measurement method and,thus,the accurate measurement of the radon exhalation rate.

关键词： Radon exhalation Numerical simulation Accumulation chamber

Advancing electrochemical drilling process via coupling of flow field and electric field in pulsating state generated by a novel tube tool

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第4期37卷 542-555页

作者： Liang CHENG Xiaolei CHEN Zhisen ye Yongjun ZHANG State Key Laboratory of Precision Electronic Manufacturing Technology and Equipment Guangdong University of TechnologyGuangzhou 510006China Guangdong Key Laboratory of Advanced Manufacturing Technology of Marine Energy Equipment Guangdong University of TechnologyGuangzhou 510006China Guangzhou Key Laboratory of Nontraditional Machining and Equipment Guangdong University of TechnologyGuangzhou 510006China

This paper introduces an improvement to electrochemical drilling process by coupling flow field and electric field in pulsating state. A novel tube with half-wedged shape at the end(HW-tube) is prepared, with both sidewall and wedged part of the HW-tube insulated. Only the flat part is utilized to provide electric field for electrochemical drilling. By rotating the HW-tube, both flow field and electric field in pulsating state are generated, alternating in different positions within the inter-electrode gap(IEG). The pulsating flow field enhances the mass transfer process, while pulsating electric field disperses material dissolution process and distribution of electrolytic byproducts. Both pulsating fields are coupled at the same frequency, further enhancing the electrochemical drilling process. Simulation results indicate that both flow field and electric field in pulsating state are generated. Compared to the traditional tube, the HW-tube significantly reduces the number of residual particles in IEG, and this number is further reduced by increasing the rotation speed. Experimental results reveal that the surface quality and dimensional uniformity of small hole are improved with HW-tube. With feed rate of 2.2. mm/min, a small hole with diameter of 1.52. 0.017 mm is drilled, resulting in a surface roughness of 0.331 μm.

关键词： Small holes Electrochemical drilling Tools Pulsating flow field Pulsating electric field

A new liquid membrane diffusion model for characterizing the adsorption kinetics of europium by using a continuous measurement of adsorption platform

在线全文

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第1期35卷 59-72页

作者： Hao-Qi Yu Tao Yu Jian-Hua ye State Key Laboratory of Nuclear Resources and Environment East China University of TechnologyNanchang 330013China CGN Cangnan Nuclear Power Co. Ltd.Cangnan 325800China Jiangxi Province Key Laboratory of Polymer Micro/Nano Manufacturing and Devices East China University of TechnologyNanchang 330013China School of Nuclear Science and Engineering East China University of TechnologyNanchang 330013China

To explore the kinetic adsorption under continuous and nonequilibrium states, an integration of continuous measurement and adsorption platform kinetics method was proposed, which was initially called the ICM-AP kinetics method, and a corresponding kinetic adsorption experimental method was developed. Adsorption experiments of europium(Eu) on Ca-bentonite,Na-bentonite, and the D2.1 cation exchange resin were performed using the ICM-AP kinetics method and continuous measurements. Because the kinetic experimental results observed in this study were different from those of traditional batch adsorption data, pseudo-first-order or pseudo-second-order kinetic models were unsuitable for fitting the experimental ***, a liquid membrane diffusion(LMD) model was developed based on the assumption of simultaneous adsorption/desorption to discuss the mechanism of kinetic adsorption. The kinetic adsorption mechanism was also studied by using *** results indicated that the proposed adsorption model can fit the experimental data more suitably, and the adsorption/desorption behaviors of Eu on bentonite and the D2.1 resin were simultaneously observed, suggesting that the adsorption kinetics of Eu(Ⅲ) was mainly dominated by hydrated Eu(Ⅲ) ions on the liquid membrane.

关键词： ICM-AP method LMD model Adsorption mechanism Eu(Ⅲ)

Modeling and analysis of air combustion and steam regeneration in methanol to olefins processes

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第2期66卷 94-103页

作者： Jinqiang Liang Danzhu Liu Shuliang Xu Mao ye Department of Chemical Physics University of Science and Technology of ChinaHefei 230026China National Engineering Research Center of Lower-Carbon Catalysis Technology Dalian Institute of Chemical PhysicsChinese Academy of SciencesDalian 116021China University of Chinese Academy of Sciences Beijing 100049China

Light olefins is the incredibly important materials in chemical *** to olefins(MTO),which provides a non-oil route for light olefins production,received considerable attention in the past ***,the catalyst deactivation is an inevitable feature in MTO processes,and regeneration,therefore,is one of the key steps in industrial MTO *** the MTO catalyst is regenerated by removing the deposited coke via air combustion,which unavoidably transforms coke into carbon dioxide and reduces the carbon utilization *** study shows that the coke species over MTO catalyst can be regenerated via steam,which can promote the light olefins yield as the deactivated coke species can be essentially transferred to industrially useful synthesis gas,is a promising pathway for further MTO processes *** this work,we modelled and analyzed these two MTO regeneration methods in terms of carbon utilization efficiency and technology *** shown,the steam regeneration could achieve a carbon utilization efficiency of 84.31%,compared to 74.74%for air combustion *** MTO processes using steam regeneration can essentially achieve the near-zero carbon *** addition,light olefins production of the MTO processes using steam regeneration is 12.81%higher than that using air combustion *** this regard,steam regeneration could be considered as a potential yet promising regeneration method for further MTO processes,showing not only great environmental benefits but also competitive economic performance.

关键词： Model Methanol to olefins Regeneration Greenhouse gas Processes simulation

Estimation of surface geometry on combustion characteristics of AP/HTPB propellant under rapid depressurization

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第3期33卷 546-558页

作者： Kaixuan Chen Zhenwei ye Xiaochun Xue Yonggang Yu School of Energy and Power Engineering Nanjing University of Science and TechnologyNanjing 210094JiangsuChina School of Science Hangzhou Dianzi UniversityHangzhou 310018ZhejiangChina

The 2. sandwich model serves as a potent tool in exploring the influence of surface geometry on the combustion attributes of Ammonium perchlorate/Hydroxyl-terminated polybutadiene(AP/HTPB)propellant under rapid pressure *** thickness of the sandwich propellant is derived from slicing the 3D random particle packing,an approach that enables a more effective examination of the micro-flame *** analysis of the predicted burning characteristics has been performed with experimental *** findings demonstrate a reasonable agreement,thereby validating the precision and soundness of the *** on the typical rapid depressurization environment of solid rocket motor(initial combustion pressure is 3 MPa and the maximum depressurization rate is 1000 MPa/s).A-type(a flatter surface),B-type(AP recesses from the combustion surface),and C-type(AP protrudes from the combustion surface)propellant combustion processes are numerically *** comparison of the evolution of gas-phase flame between 0.1 and 1 ms,it is discerned that the flame strength and form created by the three sandwich models differ significantly at the beginning stage of depressurization,with the flame structures gradually becoming harmonized over *** are drawn by comparison extinction times:the surface geometry plays a pivotal role in the combustion process,with AP protrusion favoring combustion the most.

关键词： AP/HTPB propellant BDP model Rapid pressure decay Burning surface geometry