检索结果-南通市图书馆

Microstructure and mechanical properties of a new Ti2AlNbbased alloy after aging treatment

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2018年第11期37卷 942-951页

作者： Yong-Sheng He Rui Hu wen-zhong luo Tao He Yun-Jin Lai Yu-Jun Du Xiang-Hong Liu State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi'an 710072China Western Superconducting Technologies Co Ltd Shaanxi Province Engineering Laboratory for Aerial MaterialXi'an 710018China

A new TiAlNb-based alloy with the composition of Ti-22Al-25Nb-1Mo-1V-1Zr-0.2Si(at%) was fabricated in the sequence of arc melting, forging, solid solution and aging. Present paper focuses on the effects of aging temperatures(700, 750, 800, 850 and 900 ℃) on microstructure, room-temperature tensile properties as well as tensile properties at 650 ℃ and creep properties at650 ℃/150 MPa. It is obvious that the aging treatment promotes the precipitation of O lathes from B2 *** aging temperature increasing, the content of O phase decreases and its size increases gradually, which leads to the decrease in tensile strengths both at room temperature and 650 ℃ and a little increase in ductility. For creep properties, the sample aged at 700 ℃ shows the best creep resistance due to its extremely high O phase content. Aging at 800 ℃ leads to the decrease in the content of O phase and softening of the alloy significantly. However, with aging temperature further increasing from 800 to 900 ℃,the precipitated O phase will be coarsened gradually, which strengthens the alloy again.

关键词： Ti_2AlNb alloy Aging Microstructure Tensile property Creep property

An Innovative Coupled Common-Node Discrete Element Method-Smoothed Particle Hydrodynamics Model Developed with LS-DYNA and Its Applications

在线全文

学校读者我要写书评

暂无评论

China Ocean Engineering 2024年第3期38卷 467-482页

作者： SHEN zhong-xiang WANG wen-qing XU Cheng-yue luo Jia-xin LIU Ren-wei School of Naval Architecture and Ocean Engineering Jiangsu University of Science and TechnologyZhenjiang 212100China College of Harbor Coastal and Offshore EngineeringHohai UniversityNanjing 210098China

In this study,a common-node DEM-SPH coupling model based on the shared node method is proposed,and a fluid–structure coupling method using the common-node discrete element method-smoothed particle hydrodynamics(DS-SPH)method is developed using LS-DYNA *** DEM and SPH are established on the same node to create common-node DEM-SPH particles,allowing for fluid–structure *** simulations of various scenarios,including water entry of a rigid sphere,dam-break propagation over wet beds,impact on an ice plate floating on water and ice accumulation on offshore structures,are *** interaction between DS particles and SPH fluid and the crack generation mechanism and expansion characteristics of the ice plate under the interaction of structure and fluid are also *** results are compared with available data to verify the proposed coupling ***,the simulation results demonstrated that controlling the cutoff pressure of internal SPH particles could effectively control particle splashing during ice crushing failure.

关键词： common-node DEM-SPH fluid-structure interaction discrete element method smoothed particle hydrodynamics

Production of Functional Materials Derived from Regenerated Silk Fibroin by Utilizing 3D Printing and Biomimetic Enzyme-induced Mineralization

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第3期42卷 299-310,I0005页

作者： Ni Chen Fei-Yu luo Gong-wen Yang Jin-Rong Yao Xin Chen Zheng-zhong Shao State Key Laboratory of Molecular Engineering of Polymers Laboratory of Advanced Materials and Department of Macromolecular ScienceFudan UniversityShanghai 200433China

Critical-sized bone defects, commonly encountered in clinical orthopedic surgery, present a significant challenge. One of the promising solutions is to prepare synthetic bone substitute materials with precise structural control, mechanical compatibility, and enhanced osteogenic induction performance, nevertheless the successful preparation of such materials remains difficult. In this study, a two-step technique,integrating an extrusion-based printing process with biomimetic mineralization induced by alkaline phosphatase(ALP), was developed. Initially,a pre-cured hydrogel of regenerated silk fibroin(RSF) with a small quantity of hydroxypropyl cellulose(HPC) and ALP was prepared through heating the mixed aqueous solution. This pre-cured hydrogel demonstrated thixotropic property and could be directly extruded into predetermined structures through a 3D-printer. Subsequently, the 3D-printed RSF-based materials with ALP underwent biomimetic in situ mineralization in calcium glycerophosphate(Ca-GP) mineralizing solution, utilizing the polymer chains of RSF as templates and ALP as a trigger for cleaving phosphate bonds of Ca-GP. The resulting 3D-printed RSF-mineral composites including hydrogel and sponge possessed adjustable compression modulus of megapascal grade and variable hydroxyapatite content, which could be controlled by manipulating the duration of the mineralization ***, these 3D-printed RSF-mineral composites demonstrated non-cytotoxicity towards rat bone marrow mesenchymal stem cells. Therefore, they may hold great potential for applications involving the replacement of tissues characterized by osteoinductivity and intricate structures.

关键词： Silk protein Alkaline phosphatase Extrusion-based printing Biomineralization

Application of artificial synapse based on all-inorganic perovskite memristor in neuromorphic computing

在线全文

学校读者我要写书评

暂无评论

Nano Materials Science 2024年第1期6卷 68-76页

作者： Fang luo wen-Min zhong Xin-Gui Tang Jia-Ying Chen Yan-Ping Jiang Qiu-Xiang Liu School of Physics&Optoelectric Engineering Guangdong University of TechnologyGuangzhou Higher Education Mega CenterGuangzhou510006China

Artificial synapse inspired by the biological brain has great potential in the field of neuromorphic computing and artificial *** memristor is an ideal artificial synaptic device with fast operation and good ***,we have prepared a memristor device with Au/CsPbBr_(3)/ITO *** memristor device exhibits resistance switching behavior,the high and low resistance states no obvious decline after 400 switching *** memristor device is stimulated by voltage pulses to simulate biological synaptic plasticity,such as long-term potentiation,long-term depression,pair-pulse facilitation,short-term depression,and short-term *** transformation from short-term memory to long-term memory is achieved by changing the stimulation *** addition,a convolutional neural network was constructed to train/recognize MNIST handwritten data sets;a distinguished recognition accuracy of~96.7%on the digital image was obtained in 100 epochs,which is more accurate than other memristor-based neural *** results show that the memristor device based on CsPbBr3 has immense potential in the neuromorphic computing system.

关键词： Memristor CsPbBr_(3) Resistive switching Artificial synapse Neuromorphic computing

Patterned microsphere-lens projection lithography using an electrohydrodynamic-jetprinting-assisted assembly

在线全文

学校读者我要写书评

暂无评论

Photonics Research 2024年第7期12卷 1502-1512页

作者： YA zhong HAIBO YU PEILIN ZHOU HONGJI GUO TIANMING ZHAO HAO luo YANGDONG wen XIAODUO WANG LIANQING LIU State Key Laboratory of Robotics Shenyang Institute of AutomationChinese Academy of SciencesShenyang 110016China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of SciencesShenyang 110016China University of Chinese Academy of Sciences Beijing 100049China College of Mechanical and Electrical Engineering Henan Agricultural UniversityZhengzhou 450002China Institute of Urban Rail Transportation Southwest Jiaotong UniversityChengdu 610000China

Microlens arrays have been widely used in the fields of micro-optics and micro-and nanofabrication. Traditional preparation methods utilize commercial photoresists and thermosetting materials, thereby restricting the optical properties of microlenses. In recent years, significant advancements have been achieved in near-field super-resolution imaging by utilizing microspheres and forming arrays of microsphere lenses via self-assembly. However, self-assembly approaches lack flexibility in terms of pattern selection. This study proposes a method that utilizes electrohydrodynamic jet (E-jet) printing to code ultraviolet (UV)-curable adhesives and assist in the assembly of patterned microsphere-lens arrays. Simulation results demonstrate that the UV-curable adhesive has little impact on the optical properties of the microsphere lens. Moreover, the microsphere lens exhibits a superior imaging resolution compared with traditional microlenses. A projection-lithography system is developed to achieve an accurate alignment between the focal plane of the microsphere lenses and the plane of the photoresist, facilitating the fabrication of patterned nanostructures. The lithographic nanostructures have a minimum feature size of 850 nm. This method enables the fabrication of arrays of microsphere lenses with arbitrary patterns and presents an inexpensive and simple strategy for fabricating micro-and nanostructure arrays with submicrometer features.

关键词： projection utilize utilizing

Study of the pressure transient behavior of directional wells considering the effect of non-uniform flux distribution

在线全文

学校读者我要写书评

暂无评论

Petroleum Science 2024年第3期21卷 1765-1779页

作者： Yan-zhong Liang Bai-Lu Teng Wan-Jing luo School of Energy Resources China University of Geosciences(Beijing)Beijing100083China

During the production,the fluid in the vicinity of the directional well enters the wellbore with different rates,leading to non-uniform flux distribution along the directional ***,in all existing studies,it is oversimplified to a uniform flux distribution,which can result in inaccurate results for field ***,this paper proposes a semi-analytical model of a directional well based on the assumption of non-uniform flux ***,the direction well is discretized into a carefully chosen series of linear sources,such that the complex well trajectory can be captured and the nonuniform flux distribution along the wellbore can be considered to model the three-dimensional flow *** using the finite difference method,we can obtain the numerical solutions of the transient flow within the *** the aid of Green's function method,we can obtain the analytical solutions of the transient flow from the matrix to the *** complete flow behavior of a directional well is perfectly represented by coupling the above two types of transient ***,on the basis of the proposed model,we conduct a comprehensive analysis of the pressure transient behavior of a directional *** computation results show that the flux variation along the direction well has a significant effect on pressure *** addition,the directional well in an infinite reservoir may exhibit the following flow regimes:wellbore afterflow,transition flow,inclined radial flow,elliptical flow,horizontal linear flow,and horizontal radial *** horizontal linear flow can be observed only if the formation thickness is much smaller than the well ***,a dip region that appears on the pressure derivative curve indicates the three-dimensional flow behavior near the wellbore.

关键词： Directional well Pressure transient behavior Semi-analytical model Non-uniform flux

Gear walk instability caused by brake-disc friction characteristics

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第2期37卷 343-359页

作者： Xiaoqiong DU Bin LI wen CAI Linyin luo School of Aeronautics Northwestern Polytechnical UniversityXi’an 710072China Department of Mechanical Engineering University of MichiganAnn Arbor 48109USA AVIC General Huanan Aircraft Industry Co.Ltd. Zhuhai 519040China

A multi-body dynamic rigid-flexible coupling model of landing gear is established to study the gear walk instability caused by the friction characteristics of the brake *** validating the model with the experimental results,the influence of the landing gear structure and braking system parameters on gear walk is further *** the above factors,the slope of the graph for the friction coefficient of the brake disc and the relative velocity of brake stators and rotors is the most influential factor on gear walk *** trajectory analysis verifies that gear walk occurs when the coupling of multiple factors causes the system to exhibit an equivalent negative damping *** consider a more realistic braking case,a back propagation neural network method is employed to describe the nonlinear behavior of the friction coefficient of the brake *** the realistic nonlinear model of the friction coefficient,the maximum error in predicting the braking torque is less than 10%and the effect of the brake disc temperature on gear walk is *** results reveal that a more negative friction slope may contribute to a more severe unstable gear walk,and reducing the braking pressure is an effective approach to avoid gear walk,which provides help for future braking system design.

关键词： Gear walk Friction characteristics of brake disc Brake-induced vibration Negative damping Rigid-flexible coupling Negative slope of braking torque

Basic Survey Scheduling for the Wide Field Survey Telescope(WFST)

在线全文

学校读者我要写书评

暂无评论

Research in Astronomy and Astrophysics 2024年第1期24卷 59-69页

作者： Yan-Peng Chen Ji-An Jiang wen-Tao luo Xian-zhong Zheng Min Fang Chao Yang Yuan-Yu Hong Zong-Fei Lü Purple Mountain Observatory Chinese Academy of SciencesNanjing 210023China School of Astronomy and Space Science University of Science and Technology of ChinaHefei 230026China Department of Astronomy University of Science and Technology of ChinaHefei 230026China National Astronomical Observatory of Japan National Institutes of Natural Sciences2-21-1 OsawaMitakaTokyo 181-8588Japan Institute of Deep Space Sciences Deep Space Exploration LaboratoryHefei 230026China

Aiming at improving the survey efficiency of the Wide Field Survey Telescope, we have developed a basic scheduling strategy that takes into account the telescope characteristics, observing conditions, and weather conditions at the Lenghu site. The sky area is divided into rectangular regions, referred to as “tiles,” with a size of2°. 577 × 2°. 634 slightly smaller than the focal area of the mosaic CCDs. These tiles are continuously filled in annulars parallel to the equator. The brightness of the sky background, which varies with the moon phase and distance from the moon, plays a significant role in determining the accessible survey fields. Approximately 50connected tiles are grouped into one block for observation. To optimize the survey schedule, we perform simulations by taking into account the length of exposures, data readout, telescope slewing, and all relevant observing conditions. We utilize the Greedy Algorithm for scheduling optimization. Additionally, we propose a dedicated dithering pattern to cover the gaps between CCDs and the four corners of the mosaic CCD array, which are located outside of the 3° field of view. This dithering pattern helps to achieve relatively uniform exposure maps for the final survey outputs.

关键词： telescopes surveys Moon

Effect of solvent on the initiation mechanism of living anionic polymerization of styrene:A computational study

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第5期69卷 135-142页

作者： Shen Li Yin-Ning Zhou zhong-Xin Liu Zheng-Hong luo School of Chemical Engineering and Technology Hainan UniversityHaikou 570228China Department of Chemical Engineering School of Chemistry and Chemical EngineeringState Key Laboratory of Metal Matrix CompositesShanghai Jiao Tong UniversityShanghai 200240China

For living anionic polymerization(LAP),solvent has a great influence on both reaction mechanism and *** this work,by using the classical butyl lithium-styrene polymerization as a model system,the effect of solvent on the mechanism and kinetics of LAP was revealed through a strategy combining density functional theory(DFT)calculations and kinetic *** terms of mechanism,it is found that the stronger the solvent polarity,the more electrons transfer from initiator to solvent through detailed energy decomposition analysis of electrostatic interactions between initiator and solvent ***,we also found that the stronger the solvent polarity,the higher the monomer initiation energy barrier and the smaller the initiation rate ***,initiation is more favorable at lower temperatures based on the calculated results ofΔG_(TS).Finally,the kinetic characteristics in different solvents were further examined by kinetic *** is found that in benzene and n-pentane,the polymerization rate exhibits first-order ***,slow initiation and fast propagation were observed in tetrahydrofuran(THF)due to the slow free ion formation rate,leading to a deviation from first-order kinetics.

关键词： Living anionic polymerization Solvent effect Reaction kinetics Computational chemistry Mathematical modeling Kinetic modeling