检索结果-南通市图书馆

Chinese Journal of Polymer Science 2024年第8期42卷 1147-1155页

作者： wen-Jun Feng Yan-he Wu Xiao-Yang Liu Zheng-Ke wang MOE Key Laboratory of Macromolecular Synthesis and Functionalization Department of Polymer Science and EngineeringZhejiang UniversityHangzhou 310058China

Shear-thinning hydrogels have emerged for endoscopic submucosal dissection,while wound intervention after surgery has rarely been ***,a catechol-modified chitosa n hydrogel with shear-thinning property was developed for simultaneously facilitating endoscopic submucosal dissection and postoperative wound *** from the shear-thinning and self-healing characteristics,the asprepared hydrogel showed easily endoscopic *** also performed very well as submucosal cushion,which could remain above 70%after injection for 120 min in ex vivo porcine large intestine *** fact,the cushion height of normal saline dramatically decreased to 46%of the initial height at 30 *** nanoparticles encapsulated into the network endowed the hydrogel with almost reached 100%antibacterial effect against *** and *** hemolysis ratio of the hydrogel was calculated to be as low as 0.8%.Combined with good hemocompatibility and cytocompatibility,the as-prepared hydrogel displayed much higher in vivo wound closu re and healing efficacy than normal *** results demonstrated the superiority of the shear-thinning chitosan hydrogel in facilitating clinical endoscopic submucosal dissection surgery.

关键词： Shear-thinning hydrogel Endoscopic mucosal dissection Wound healing Catechol-modified chitosan Silver nanoparticles

Improving Thermal-oxidative Aging Resistance of Styrene-butadiene Rubber by Antioxidant Loaded Silica Aerogel

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第8期42卷 1198-1209页

作者： Xue-Fei Ping Yu wang Lu Liu Fu-Yong Liu Hong-Wei he Pi wang wen-wen Yu Qiang Zheng College of Materials Science and Engineering Taiyuan University of TechnologyTaiyuan 030024China Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering Taiyuan 030032China Key Laboratory of Macromolecular Synthesis and Functionalization Department of Polymer Science and EngineeringZhejiang UniversityHangzhou 310058China

The antioxidant N-isopropyl-N'-phenyl-p-phenylenediamine(4010NA)was dissolved in ethanol and impregnated into silica aerogel(SAG)via vacuum-pressure cycles,yielding composite particles(A-N)with enhanced sustained-release and reinforcing *** effect of A-N on the mechanical properties and thermal-oxidative aging resistance of styrene-butadiene rubber(SBR)vulcanizates was *** and BET assessments indicated that the loading efficiency of 4010NA in SAG reached 14.26%within ethanol's solu bility *** A-N into SBR vulcanizates significantly elevated tensile strength by 17.5%and elongation at break by 41.9%over those with fumed silica and ***,A-N notably enhanced the thermal-oxidative aging resistance of *** aging for 96 h at 100℃,the tensile strength and elongation at break of SBR with A-N sustained 70.09%and 58.61%of their initial values,respectively,with the retention rate of elongation at break being 62.8%higher than that of SBR with fumed silica and free *** study revealed that A-N composite particles significantly inhibited the crosslinking in SBR's molecular chains,reducing hardening and embrittlement during later thermal-oxidative aging stages.

关键词： Styrene-butadiene rubber Silica aerogel Loading modification Thermal-oxidative aging

Construction of core@double-shell structured energetic composites with simultaneously enhanced thermal stability and safety performance

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第4期34卷 134-142页

作者： Peng wang wen Qian Ruolei Zhong Fangfang he Xin Li Jie Chen Li Meng Yinshuang Sun Guansong he Institute of Chemical Materials China Academy of Engineering PhysicsMianyang 621900China State Key Laboratory of Environment-friendly Energy Materials School of Materials and ChemistrySouthwest University of Science and TechnologyMianyang 621010China

The poor thermal stability and high sensitivity severely hinder the practical application of hexanitrohexaazaisowurtzitane(CL-20).herein,a kind of novel core@double-shell CL-20 based energetic composites were fabricated to address the above *** coordination complexes which consist of natural polyphenol tannic acid(TA) and Fe~Ⅲ were chosen to construct the inner shell,while the graphene sheets were used to build the outer *** resulting CL-20/TA-Fe~Ⅲ/graphene composites exhibited simultaneously improved thermal stability and safety performance with only 1 wt% double-shell content,which should be ascribed to the intense physical encapsulation effect from inner shell combined with the desensitization effect of carbon nano-materials from outer *** phase transition(ε to γ) temperature increased from 173.70 ℃ of pure CL-20 to 191.87℃ of CL-20/TA-Fe~Ⅲ/graphene ***,the characteristic drop height(H_(50)) dramatically increased from 14.7 cm of pure CL-20 to112.8 cm of CL-20/TA-Fe~Ⅲ/graphene composites,indicating much superior safety performance after the construction of the double-shell *** general,this work has provided an effective and versatile strategy to conquer the thermal stability and safety issues of CL-20 and contributes to the future application of high energy density energetic materials.

关键词： CL-20 Double-shell structure Thermal stability Safety performance Tannic acid Graphene sheets

Adhesive Contact of Elastic Solids with Self-Affine Fractal Rough Surfaces

在线全文

学校读者我要写书评

暂无评论

Acta Mechanica Solida Sinica 2024年第2期37卷 265-270页

作者： Xuan-Ming Liang Shi-wen Chen Si-he wang Zhen-Yuan Gong Jun Feng Gang-Feng wang Department of Engineering Mechanics SVL and MMMLXi’an Jiaotong UniversityXi’an710049China OPPO Mobile Telecommunications Corporation Ltd. Dongguan523860China

The elastic adhesive contact of self-affine fractal rough surfaces against a rigid flat is simulated using the finite element method. An array of nonlinear springs, of which the force-separation law obeys the Lennard–Jones potential, is introduced to account for the interfacial adhesion. For fractal rough surfaces, the interfacial interaction is generally attractive for large mean gaps, but turns repulsive as the gap continuously shrinks. The interfacial interactions at the turning point corresponding to the spontaneous contact are shown for various surfaces. For relatively smooth surfaces, the probability density distributions of repulsion and attraction are nearly symmetric. However, for rougher surfaces, the simulation results suggest a uniform distribution for attraction but a monotonously decreasing distribution with a long tail for repulsion. The pull-off force rises with increasing ratio of the work of adhesion to the equilibrium distance, whereas decreases for solids with a higher elastic modulus and a larger surface roughness. The current study will be helpful for understanding the adhesion of various types of rough solids.

关键词： Fractal rough surfaces Adhesion Contact mechanics Lennard-Jones potential

A Gel-Based Solidification Technology for Large Fracture Plugging

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Fluid Dynamics & Materials Processing 2024年第3期20卷 563-578页

作者： Kunjian wang Ruibin he Qianhua Liao Kun Xu wen wang Kan Chen Tianjin Branch of CNOOC(China)Co. Ltd.Tianjin300450China Jingzhou Jiahua Technology Co. Ltd.Jingzhou434001China

Fault fractures usually have large openings and considerable extension. Accordingly, cross-linked gel materials aregenerally considered more suitable plugging agents than water-based gels because the latter often undergo contaminationvia formation water, which prevents them from being effective over long times. hence, in this study, aset of oil-based composite gels based on waste grease and epoxy resin has been developed. These materials havebeen observed to possess high compressive strength and resistance to the aforementioned contamination, therebyleading to notable increase in plugging success rate. The compressive strength, thickening time, and resistance toformation water pollution of these gels have been evaluated indoors. The results show that the compressivestrength of the gel can reach 11 MPa;additionally, the related gelation time can be controlled to be more than3 h, thereby providing a safe construction time;Invasion of formation water has a small effect on the gel strengthand does not shorten the thickening time. All considered performance indicators of the oil-based gel confirm itssuitability as a plugging agent for fault fractures.

关键词： Drilling loss fault fracture oil-based gel compressive strength gel plugging

Study of inter-well interference in shale gas reservoirs by a robust production data analysis method based on deconvolution

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第4期21卷 2502-2519页

作者： wen-Chao Liu Cheng-Cheng Qiao Ping wang wen-Song Huang Xiang-wen Kong Yu-Ping Sun he-Dong Sun Yue-Peng Jia School of Civil and Resource Engineering University of Science and Technology Beijing PetroChina Research Institute of Petroleum Exploration and Development

In order to overcome the defects that the analysis of multi-well typical curves of shale gas reservoirs is rarely applied to engineering, this study proposes a robust production data analysis method based on deconvolution, which is used for multi-well inter-well interference research. In this study, a multi-well conceptual trilinear seepage model for multi-stage fractured horizontal wells was established, and its Laplace solutions under two different outer boundary conditions were obtained. Then, an improved pressure deconvolution algorithm was used to normalize the scattered production data. Furthermore, the typical curve fitting was carried out using the production data and the seepage model solution. Finally,some reservoir parameters and fracturing parameters were interpreted, and the intensity of inter-well interference was compared. The effectiveness of the method was verified by analyzing the production dynamic data of six shale gas wells in Duvernay area. The results showed that the fitting effect of typical curves was greatly improved due to the mutual restriction between deconvolution calculation parameter debugging and seepage model parameter debugging. Besides, by using the morphological characteristics of the log-log typical curves and the time corresponding to the intersection point of the log-log typical curves of two models under different outer boundary conditions, the strength of the interference between wells on the same well platform was well judged. This work can provide a reference for the optimization of well spacing and hydraulic fracturing measures for shale gas wells.

关键词： Shale gas Inter-well interference Deconvolution Production data analysis Typical curves Multi-stage fractured horizontal well

High-temperature stability of retained austenite and plastic deformation mechanism of ultra-fine bainitic steel isothermally treated below Ms

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第8期31卷 2014-2030页

作者： Ting-ting he Feng Hu Kun wang wen Zhou Li Li Serhii Yershov Kai-ming Wu The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081HubeiChina Collaborative Innovation Center for Advanced Steels Wuhan University of Science and TechnologyWuhan 430081HubeiChina Zhejiang Tsingshan Iron and Steel Co. Ltd.Qingtian 323903ZhejiangChina

The mechanical properties of the sample and the stability of retained austenite were studied by designing two kinds of ultra-fine bainitic steel with different heat treatment methods austempering above and below Ms(martensite start tem-perature),which were subjected to tensile tests at 20 and 450℃,*** results show that compared to room temperature(20℃)tensile properties,the uniform elongation of the sample at high temperature(450℃)significantly ***,the uniform elongation of the sample austempered above Ms decreased from 8.0%to 3.5%,and the sample austempered below Ms decreased from 10.9%to 3.1%.Additionally,the tensile strength of the sample austempered above Ms significantly decreased(from 1281 to 912 MPa),and the sample austempered below Ms slightly decreased(from 1010 to 974 MPa).This was due to the high carbon content(1.60 wt.%),high mechanical stability,low thermal stability for the retained austenite of the sample austempered below ***,the retained austenite decomposed at high temper-atures,the carbon content and transformation driving force were significantly reduced,the transformation rate increased,and the phase transformation content reduced.

关键词： Ultra-fine bainite Isothermal treatment High-temperature tensile property Retained austenite stability Plastic deformation

Intrinsically asymmetric atomic character regulates piezoelectricity in two-dimensional materials

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of physics 2024年第3期19卷 153-162页

作者： Yun-Qin Li Qi-wen he Dai-Song Tang Xiao Shang Xiao-Chun wang School of Physics Science and Information Technology Liaocheng UniversityLiaocheng 252000China Key Laboratory of Polar Materials and Devices Ministry of EducationDepartment of ElectronicsEast China Normal UniversityShanghai 200241China Institute of Atomic and Molecular Physics Jilin UniversityChangchun 130012China

Decreasing of layer thickness causes the decrease of polarization until it disappears due to the existence of depolarization ***,the search for strong piezoelectric materials is highly desirable for multifunctional ultra-thin piezoelectric ***,we propose a common strategy for achieving strong piezoelectric materials through the electronic asymmetry induced by the intrinsically asymmetric atomic character of different chalcogen ***,in the tetrahedral lattice structures,for example,M4X3Y3(M=Pd/Ni,X/Y=S,Se or Te,X≠Y)monolayers are proved to display excellent out-of-plane ***4Se3Te3 possesses the largest piezoelectric coefficient d33 of 61.57 pm/V,which is much larger than that of most 2D *** the electronic asymmetry further increases the out-of-plane piezoelectricity of Janus M4X3Y3 ***,the out-of-plane piezoelectricity is positively correlated with the ratio of electronegativity difference(Red)and the electric dipole moment(P).This work provides alternative materials for energy harvesting nano-devices or self-energized wearable devices,and supplies a valuable guideline for predicting 2D materials with strong out-of-plane piezoelectricity.

关键词： piezoelectricity intrinsically asymmetric atomic character ratio of electronegativity difference electric dipole moment first-principles calculations

Adhesion property of AlCrNbSiTi high-entropy alloy coating on zirconium:experimental and theoretical studies

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第8期35卷 79-91页

作者： Bao‑Liang Zhang wen‑Guan Liu Meng‑he Tu Can Fang Yan Liu Yu‑Hui wang Yong Hu Hui wang China Institute of Atomic Energy Beijing 102413China Sino‑French Institute of Nuclear Engineering and Technology Sun Yat-Sen UniversityZhuhai 519082China School of Power and Mechanical Engineering Wuhan UniversityWuhan 430072China

Experimental scratch tests and first-principles calculations were used to investigate the adhesion property of AlCrNbSiTi high-entropy alloy(heA)coatings on zirconium *** heA and Cr coatings were deposited on Zr alloy substrates using multi-arc ion plating technology,and scratch tests were subsequently conducted to estimate the adhesion property of the *** results indicated that Cr coatings had better adhesion strength than heA coatings,and the heA coatings showed *** special quasi-random structure approach was used to build heA models,and Cr/Zr and heA/Zr interface models were employed to investigate the cohesion between the coatings and Zr substrate using first-principles *** calculated interface energies showed that the cohesion between the Cr coating and the Zr substrate was stronger than that of the heA coating with *** contrary to Al or Si in the heA coating,Cr,Nb,and Ti atoms binded strongly with Zr *** on the calculated elastic constants,it was found that low Cr and high Al content decreased the mechanical performances of heA ***,this study demonstrated the utilization of a combined approach involving first-principles calculations and experimental studies for future heA coating development.

关键词： High-entropy alloy coating Cr coating Adhesion property Scratch test First-principles calculation

Corrugated Graphene Paper Reinforced Silicone Resin Composite for Efficient Interface Thermal Management

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Polymer Science 2024年第7期42卷 1002-1014,I0010页

作者： Bo-wen wang heng Zhang Qing-Xia he Hui-Tao Yu Meng-Meng Qin Wei Feng Tianjin Key Laboratory of Composite and Functional Materials School of Materials Science and EngineeringTianjin UniversityTianjin300350China International Engineering Institute Tianjin UniversityTianjin300350China

With the rapid development of high-power-density electronic devices,interface thermal resistance has become a critical barrier for effective heat management in high-performance electronic ***,there is an urgent demand for advanced thermal interface materials(TIMs)with high cross-plane thermal conductivity and excellent compressibility to withstand increasingly complex operating *** achieve this aim,a promising strategy involves vertically arranging highly thermoconductive graphene on ***,with the currently available methods,achieving a balance between low interfacial thermal resistance,bidirectional high thermal conductivity,and large-scale production is ***,we prepared a graphene framework with continuous filler structures in in-plane and cross-plane directions by bonding corrugated graphene to planar graphene *** interface interaction between the graphene paper framework and polymer matrix was enhanced via surface functionalization to reduce the interface thermal *** resulting three-dimensional thermal framework endows the polymer composite material with a cross-plane thermal conductivity of 14.4 W·m^(-1)·K^(-1)and in-plane thermal conductivity of 130W·m^(-1)·K^(-1)when the thermal filler loading is 10.1 wt%,with a thermal conductivity enhancement per 1 wt%filler loading of 831%,outperforming various graphene structures as *** its high thermal conductivity,low contact thermal resistance,and low compressive modulus,the developed highly thermoconductive composite material demonstrates superior performance in TIM testing compared with TFLEX-700,an advanced commercial TIM,effectively solving the interfacial heat transfer issues in electronic *** novel filler structure framework also provides a solution for achieving a balance between efficient thermal management and ease of processing.

关键词： Graphene paper Vertically aligned structure Cross-plane thermal conductivity Low compressive modulus Thermal interface material