检索结果-南通市图书馆

Efficient quantum dot sensitized solar cells via improved loading amount management

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Green Energy & Environment 2023年第1期8卷 213-223页

作者： Wei Wang Yiling Xie Fangfang He Yuan Wang weinan xue Yan Li Key Laboratory for Advanced Materials Shanghai Key Laboratory of Functional Materials ChemistrySchool of Chemistry and Molecular EngineeringEast China University of Science and TechnologyShanghai200237China

High light-harvesting efficiency and low interfacial charge transfer loss are essential for the fabrication of high-efficiency quantum dot-based solar cells(QDSCs). Increasing the thickness of mesoporous TiO2films can improve the loading of pre-synthesized QDs on the film and enhance the absorbance of photoanode, but commonly accompanied by the increase in the unfavorable charge recombination due to prolonged electron transmission paths. Herein, we systematically studied the influence of the balance between QD loading and TiO2film thickness on the performance of QDSCs. It is found that the relative thin photoanode prepared by the cationic surfactant-assisted multiple deposition procedure has achieved a high QD loading which is comparable to that of the thick photoanode commonly used. Under AM 1.5G illumination, Zn–Cu–In–Se and Zn–Cu–In–S based QDSCs with optimized 11.8 μm photoanodes show the PCE of 10.03% and 8.53%, respectively, which are comparable to the corresponding highest PCE of Zn–Cu–In–Se and Zn–Cu–In–S QDSCs(9.74% and 8.75%) with over 25.0 μm photoanodes. Similarly, an impressive PCE of 6.14% was obtained for the CdSe based QDSCs with a 4.1 μm photoanode, which is slightly lower than the best PCE(7.05%)of reference CdSe QDSCs with 18.1 μm photoanode.

关键词： Quantum dot sensitized solar cell Photoanode Loading amount Surfactant-assisted deposition

Highly luminescent and stable CsPbBr3 perovskite quantum dots modified by phosphine ligands

在线全文

学校读者我要写书评

暂无评论

Nano Research 2019年第4期12卷 785-789页

作者： Yan Li Xiaoyan Wang weinan xue Wei Wang Wei Zhu Lianjing Zhao Key Laboratory far Advanced Materials Shanghai Key Laboratory of Functional Materials Chemistry School of Chemistry and Molecular Engineering East China University of Science and Technology Shanghai 200237 China

All-inorganic cesium lead halide perovskite quantum dots (QDs) have been a promising candidate for optoelectronic devices in recent years,such as light-emitting diodes,photodetectors and solar cells,owing to their superb optoelectronic ***,the stability issue of nanocrystals is a bottleneck for their practical ***,we report a facile method for the synthesis of a series of phosphine ligand modified CsPbBr3 QDs with high PL *** introducing organic phosphine ligands,the tolerance of CsPbBr3 QDs to ethanol,water and UV light was dramatically ***,the phosphine ligand modified QD films deposited on the glass subtracts exhibit superior PL intensity and optical stability to those of pristine QD based films.

关键词： perovskite quantum dots organic phosphine ligands optical and structure stability

Aluminum Distearate-Modified CsPbX_(3)(X=I,Br,or Cl/Br) Nanocrystals with Enhanced Optical and Structural Stabilities

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CCS Chemistry 2020年第2期2卷 13-23页

作者： weinan xue Xiaoyan Wang Wei Wang Fangfang He Wei Zhu Yan Li Key Laboratory for Advanced Materials and Feringa Nobel Prize Scientist Joint Research Center School of Chemistry and Molecular EngineeringEast China University of Science and TechnologyShanghai 200237China

Colloidal all-inorganic perovskite nanocrystals(PNCs),possessing unique optical properties,have attracted considerable attention in the field of semiconductor nanocrystals(NCs),but their application is hindered by the stability issue resulting partly from dynamic capping ligand ***,we report a simple method for the synthesis of all-inorganic cesium lead-based(CsPbX3)NCs with enhanced structural stability and photoluminescence quantum *** distearate(AlDS)was introduced into the preparation of CsPbX3 NCs,on the basis that the surface defects of CsPbX3 NCs are passivated to form a protective layer on the CsPbX3 NC surface *** from surface modification,the resistance of the CsPbX3 NC dispersion against ethanol,ultraviolet irradiation,and heat treatment was enhanced ***,the photoluminescence intensity and stability of the AlDS–modified NC-based films displayed functional superiority to those of pristine NC-based films.

关键词： perovskite nanocrystal cesium lead halide aluminum distearate multidentate ligand stability

Character Sheaves for Classical Graded Lie Algebras

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Mathematica Sinica,English Series 2024年第3期40卷 870-884页

作者： Ting xue School of Mathematics and Statistics University of MelbourneVIC 3010Australia Department of Mathematics and Statistics University of HelsinkiHelsinki 00014Finland

In this note we study character sheaves for graded Lie algebras arising from inner automorphisms of special linear groups and Vinberg’s type Ⅱ classical graded Lie algebras.

关键词： Graded Lie algebras character sheaves Fourier transform nilpotent orbits

Mechanical property of cylindrical sandwich shell with gradient core of entangled wire mesh

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第1期31卷 510-522页

作者： Xin xue Chao Zheng Fu-qiang Lai xue-qian Wu Institute of Metal-rubber&Vibration Noise School of Mechanical Engineering and AutomationFuzhou UniversityFuzhou350116China Fujian Metallurgical Industry Design Institute Fuzhou350116China

To explore the wide-frequency damping and vibration-attenuation performances in the application of aerospace components,the cylindrical sandwich shell structure with a gradient core of entangled wire mesh was proposed in this ***,the gradient cores of entangled wire mesh in the axial and radial directions were prepared by using an in-house Numerical Control weaving machine,and the metallurgical connection between skin sheets and the gradient core was performed using vacuum ***,to investigate the mechanical properties of cylindrical sandwich shells with axial or radial gradient cores,quasi-static and dynamic mechanical experiments were carried *** primary evaluations of mechanical properties include secant stiffness,natural frequency,Specific Energy Absorption(SEA),vibration acceleration level,and so *** results suggest that the vibration-attenuation performance of the sandwich shell is remarkable when the high-density core layer is at the end of the shell or abuts the inner *** axial gradient material has almost no influence on the vibration frequencies of the shell,whereas the vibration frequencies increase dramatically when the high-density core layer approaches the ***,compared to the conventional sandwich shells,the proposed functional grading cylindrical sandwich shell exhibits more potential in mass reduction,stiffness designing,and energy dissipation.

关键词： Entangled wire mesh Gradient cylindrical sandwich shell Vacuum brazing Secant stiffness Damping

Linear Quadratic Optimal Control for Systems Governed by First-Order Hyperbolic Partial Differential Equations

在线全文

学校读者我要写书评

暂无评论

Journal of Systems Science & Complexity 2024年第1期37卷 230-252页

作者： xue Xiaomin XU Juanjuan ZHANG Huanshui School of Control Science and Engineering Shandong UniversityJinan 250061China College of Electrical Engineering and Automation Shandong University of Science and TechnologyQingdao 266000China

This paper focuses on linear-quadratic(LQ)optimal control for a class of systems governed by first-order hyperbolic partial differential equations(PDEs).Different from most of the previous works,an approach of discretization-then-continuousization is proposed in this paper to cope with the infinite-dimensional nature of PDE *** contributions of this paper consist of the following aspects:(1)The differential Riccati equations and the solvability condition of the LQ optimal control problems are obtained via the discretization-then-continuousization method.(2)A numerical calculation way of the differential Riccati equations and a practical design way of the optimal controller are ***,the relationship between the optimal costate and the optimal state is established by solving a set of forward and backward partial difference equations(FBPDEs).(3)The correctness of the method used in this paper is verified by a complementary continuous method and the comparative analysis with the existing operator results is *** is shown that the proposed results not only contain the classic results of the standard LQ control problem of systems governed by ordinary differential equations as a special case,but also support the existing operator results and give a more convenient form of computation.

关键词： Discretization-then-continuousization method first-order hyperbolic partial differential equations forward and backward partial difference equations linear quadratic optimal control.

Thermodynamic property of sandwich cylindrical shell structure with metallic wire mesh:Numerical modeling and experimental analysis

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第1期37卷 138-152页

作者： Xin xue Guojian SHEN Juan LIAO Institute of Metal Rubber&Vibration Noise School of Mechanical Engineering and AutomationFuzhou UniversityFuzhou 350116China Fujian Shuikou Power Generation Group Co. LTDFuzhou 350000China

As a new addition to lightweight composite structures,the sandwich cylindrical shell with a metallic wire mesh core has emerged as a promising solution for thermodynamic performance analysis at elevated *** intricate interwoven cellular formations within the metallic wire mesh pose difficulties for thermo-mechanical modeling and property ***,the constitutive models employed to characterize hysteresis phenomena were presented,comprising isotropic elasticity,Bergstrom-Boyce model,Ogden hyper-elasticity,and parameter identification through mechanical examinations at varying ***,the finite element modeling of cylindrical shell structures was determined for modal and steady-state dynamic ***,the experimental procedures were carried out,including the preparation of the sandwich cylindrical shell and the dynamic testing *** first-order natural frequency of the cylindrical shell structure is close to the resonance frequency of the dynamic test results,with a maximum error of 6.5%,demonstrating the accuracy of the simulation *** compared to the solid-core cylindrical shell,the average insertion loss of the sandwich cylindrical shell structure within the frequency range of 10–1000 Hz at room temperature is up to 11.09 ***,at elevated temperatures,the average insertion loss of the sandwich cylindrical shell decreases but fluctuates as the temperature changes.

关键词： Energy dissipation Metallic matrix composites Numerical analysis Sandwich structure Thermodynamic properties

Interface property of dissimilar Ti-6Al-4V/AA1050 composite laminate made by non-equal channel lateral co-extrusion and heat treatment

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第3期33卷 197-208页

作者： Juan Liao Mengmeng Tian Xin xue School of Mechanical Engineering and Automation Fuzhou UniversityFuzhou 350116China

The purpose of this paper is to examine the effect of processing parameters and subsequent heat treatments on the microstructures and bonding strengths of Ti-6Al-4V/AA1050 laminations formed via a non-equal channel lateral co-extrusion *** microstructural evolution and growth mechanism in the diffusion layer were discussed further to optimize the bonding quality by appropriately adjusting process *** electron microscopes(SEM),energy dispersive spectrometer(EDS),and X-ray diffraction(XRD)were used to characterize interfacial diffusion *** shear test was used to determine the mechanical properties of the interfacial diffusion *** experimental results indicate that it is possible to co-extrusion Ti-6Al-4V/AA1050 compound profiles using non-equal channel lateral *** heat treatment processes affect the thickness of the diffusion *** the temperature and time of heat treatment increase,the thickness of the reaction layers increases ***,the shear strength of the Ti-6Al-4V/AA1050 composite interface is proportional to the diffusion layer *** is observed that a medium interface thickness results in superior mechanical performance when compared to neither a greater nor a lesser interface *** characterization of all heat treatments reveals that the only intermetallic compound observed in the diffusion layers is TiAl_(3).Due to the inter-diffusion of Ti and Al atoms,the TiAl_(3) layer grows primarily at AA1050/TiAl_(3) interfaces.

关键词： Shear strength Co-extrusion Heat treatment Microstructure Intermetallic compounds

Experimental Study on Wire Melting Control Ability of Twin-Body Plasma Arc

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Mechanical Engineering 2024年第2期37卷 184-194页

作者： Ruiying Zhang Fan Jiang Long xue School of Mechanical Engineering Beijing Institute of Petrochemical TechnologyBeijing 102617China Beijing Academy of Safety Engineering and Technology Beijing 102617China College of Mechanical and Energy Engineering Beijing University of TechnologyBeijing 100124China

The twin-body plasma arc has the decoupling control ability of heat transfer and mass transfer,which is beneficial to shape and property control in wire arc additive *** this paper,with the wire feeding speed as a characteristic quantity,the wire melting control ability of twin-body plasma arc was studied by adjusting the current separation ratio(under the condition of a constant total current),the wire current/main current and the position of the wire in the arc axial *** results showed that under the premise that the total current remains unchanged(100 A),as the current separation ratio increased,the middle and minimum melting amounts increased approximately synchronously under the effect of anode effect power,the first melting mass range remained constant;the maximum melting amount increased twice as fast as the middle melting amount under the effect of the wire feeding speed,and the second melting mass range was *** the wire current increased,the anode effect power and the plasma arc power were both factors causing the increase in the wire melting amount;however,when the main current increased,the plasma arc power was the only factor causing the increase in the wire melting *** average wire melting increment caused by the anode effect power was approximately 2.7 times that caused by the plasma arc *** minimum melting amount was not affected by the wire-torch distance under any current separation ratio *** the current separation ratio increased and reached a threshold,the middle melting amount remained constant with increasing wire-torch *** the current separation ratio continued to increase and reached the next threshold,the maximum melting amount remained constant with the increasing wire-torch *** effect of the wire-torch distance on the wire melting amount reduced with the increase in the current separation *** this study,the decoupling mechanism and ability of this innovative

关键词： Twin-body plasma arc Melting control ability Melting amount Current separation ratio