检索结果-南通市图书馆

同方期刊数据库

Development of component stiffness equations for thread-fixed one-side bolt connections to an enclosed rectangular hollow section column under tension

在线全文

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2024年第4期18卷 568-586页

作者： Fu-wei wu Yuan-Qi LI Department of Structural Engineering Tongji UniversityShanghai 200092China State Key Laboratory of Disaster Reduction in Civil Engineering Tongji UniversityShanghai 200092China

The derivation and validation of analytical equations for predicting the tensile initial stiffness of threadfixed one-side bolts(TOBs),connected to enclosed rectangular hollow section(RHS)columns,is presented in this *** unknown stiffness components are considered:the TOBs connection and the enclosed RHS ***,the trapezoidal thread of TOB,as an equivalent cantilevered beam subjected to uniformly distributed loads,is analyzed to determine the associated *** on the findings,the thread-shank serial-parallel stiffness model of TOB connection is *** analysis of the tensile stiffness of the enclosed RHS face due to two bolt forces,the four sidewalls are treated as rotation constraints,thus reducing the problem to a two-dimensional plate *** to the load superposition method,the deflection of the face plate is resolved into three components under various boundary and load *** to the plate deflection theory of Timoshenko,the analytical solutions for the three deflections are derived in terms of the variables of bolt spacing,RHS thickness,height to width ratio,***,the validity of the above stiffness equations is verified by a series of finite element(FE)models of T-stub *** proposed component stiffness equations are an effective supplement to the component-based method.

关键词： initial stiffness component based method thread-fixed one-side bolt rectangular hollow sections analytical equation

Simultaneous purification of minor components in natural products using twin-column recycling chromatography with a step solvent gradient

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第5期69卷 212-219页

作者： Guangxia Jin Yuxue wu Feng wei School of Biological and Chemical Engineering NingboTech UniversityNingbo 315100China

The isolation of minor components from complex natural product matrices presents a significant challenge in the field of purification science due to their low concentrations and the presence of structurally similar *** study introduces an optimized twin-column recycling chromatography method for the efficient and simultaneous purification of these elusive *** introducing water at a small flowing rate between the twin columns,a step solvent gradient is created,by which the leading edge of concentration band would migrate at a slower rate than the trailing edge as it flowing from the upstream to downstream ***,the band broadening is counterbalanced,resulting in an enrichment effect for those minor components in separation ***,two target substances,which showed similar peak position in high performance liquid chromatography(HPLC)and did not exceed 1.8%in crude paclitaxel were selected as target compounds for *** using the twin-column recycling chromatography with a step solvent gradient,a successful purification was achieved in getting the two with the purity almost 100%.We suggest this method is suitable for the separation of most components in natural produces,which shows higher precision and recovery rate compared with the common lab-operated separation ways for natural products(thin-layer chromatography and prep-HPLC).

关键词： Solvent gradient Twin-column recycling chromatography Purification Minor component Natural products

Blind Signal Reception in Downlink Generalized Spatial Modulation Multiuser MIMO System Based on Minimum Output Energy

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Electronics 2024年第2期33卷 504-515页

作者： wei-Chiang wu College of Mechanical and Electrical Engineering Sanming University

This paper considers downlink multiuser multiple-input-multiple-output system with parallel spatial modulation scheme, in which base station transmitter antennas are separated into K groups corresponding to K user terminals. Generalized spatial modulation is employed, in which a subset(more than single antenna) of transmit antenna array are activated and the activating pattern corresponds to specific spatial symbol. Different from existing precoding-based algorithms, we develop a two-stage detection scheme at each user terminal: In the pre-processing stage, a minimax algorithm is proposed to identify the indices of active antennas, where the key idea is that the minimum output energy of the detector is maximized; A constrained minimum output energy algorithm is proposed in the post-processing stage to mitigate multiuser interference and extract temporal symbols. Compared with existing precoding-based algorithms, the complexity is significantly reduced. Moreover, the proposed algorithm is semi-blind,in which only a small subset of channel state information is required to identify active antennas as well as eliminate multiuser interference. Simulation results demonstrate that the proposed algorithm is near-far resistant and the spectral efficiency is extensively increased compared to the conventional spatial modulation scheme.

关键词： GSM Spectral efficiency Computer network reliability Transmitting antennas Modulation Symbols Downlink

Almost Periodic Type Group Actions on Compact Quantum Metric Spaces

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Acta Mathematica Sinica,English Series 2024年第2期40卷 568-594页

作者： Bo Tao LONG wei wu College of Mathematics MIIT Key Laboratory of Mathematical Modelling and High Performance Computing of Air VehiclesNanjing University of Aeronautics and AstronauticsNanjing 211106P.R.China School of Mathematical Sciences Shanghai Key Laboratory of Pure Mathematics and Mathematical PracticeEast China Normal UniversityShanghai 200241P.R.China

A compact quantum metric space is a complete order unit space A endowed with a Lipnorm *** give some characterizations of almost periodic type group actions on a compact quantum metric space(A,L)by means of several kinds of subsets of A,its induced equicontinuous actions on several important subsets of the dual Banach space A*,and the Lip-norm L with its induced metric space structures on the state space S(A)of A.

关键词： Lip-norm compact quantum metric space Lipschitz isomorphism almost periodicity Arzela-Ascoli theorem metric set

Optimization of Hydrocracking Process for Enhanced BTX Production from Coal Tar-Derived Hydrorefined Products

在线全文

学校读者我要写书评

暂无评论

China Petroleum Processing & Petrochemical Technology 2024年第1期26卷 139-151页

作者： wu Hao wei Hongyuan School of Chemical Engineering and Technology Tianjin UniversityTianjin 300350China SINOPEC Research Institute of Petroleum Processing Co. Ltd.Beijing 100083China

Hydroconversion of coal tar to produce aromatic hydrocarbons(BTX)represents a crucial strategy for the highvalue hierarchical utilization of *** study focused on the hydrocracking of hydrorefined products derived from coal tar to enhance the production of benzene,toluene,and xylene(BTX).Various reaction conditions,including reaction temperature,hydrogen pressure,space velocity,and hydrogen-to-oil volume ratio,were systematically explored to optimize BTX yields while also considering the process’s economic *** results indicate that increasing the reaction temperature from 360℃ to 390℃ significantly favors the production of BTX,with yields increasing from 21.42%to 41.14%.Similarly,an increase in hydrogen pressure from 4 MPa to 6 MPa boosts BTX production,with yields rising from 36.31%to 41.14%.Reducing the space velocity from 2 h^(-1) to 0.5 h^(-1) also favors the BTX production process,with yields increasing from 37.96%to 45.13%.Furthermore,raising the hydrogen-to-oil volume ratio from 750 to 1500 improves BTX yields from 41.61%to 45.44%.Through economic analysis,the optimal conditions for BTX production were identified as a reaction temperature of 390℃,hydrogen pressure of 5-6 MPa,space velocity of 1 h^(-1),and hydrogen-to-oil volume ratio of 1000,achieving a BTX yield of 43.73%.This investigation highlights the importance of a holistic evaluation of hydrocracking conditions to optimize BTX ***,the findings offer valuable insights for the design and operation of industrial hydrocracking processes aimed at efficiently converting coal tar-derived hydrorefined feedstock into BTX.

关键词： coal tar hydrocracking BTX process optimization economic assessment

Glial progenitor heterogeneity and plasticity in the adult spinal cord

在线全文

学校读者我要写书评

暂无评论

Neural Regeneration Research 2024年第12期19卷 2567-2568页

作者： Haichao wei Jia Qian wu Department of Neurosurgery McGovern Medical SchoolThe University of Texas Health Science Center at HoustonHoustonTXUSA Center for Stem Cell and Regenerative Medicine UT Brown Foundation Institute of Molecular MedicineHoustonTXUSA MD Anderson Cancer Center UTHealth Graduate School of Biomedical Sciences HoustonTXUSA

Glial progenitor cells were reported to have the capacity to generate various types of cells in both the central nervous system(CNS)and peripheral nervous *** progenitor cells can respond to diverse environmental signals and transform into distinct populations,each serving specific ***,the adult spinal cord hosts various populations of glial progenitors,a region integral to the central nervous *** development,glial progenitors express glial fibrillary acidic protein(GFAP;Dimou and Gotz,2014).However,the specific identities of GFAP-expressing progenitors in the adult spinal cord were not thoroughly investigated.

关键词： functions plasticity thoroughly

Selection Method for New Energy Output Guaranteed Rates Considering Optimal Energy Storage Configuration

在线全文

学校读者我要写书评

暂无评论

CSEE Journal of Power and Energy Systems 2024年第2期10卷 539-547页

作者： Xin Cheng Tong wu wei Yao Yan Yang Guangdong Power Grid Corporation Guangzhou 510620China State Key Laboratory of Advanced Electromagnetic Engineering and Technology and School of Electrical and Electronic EngineeringHuazhong University of Science and TechnologyWuhan 430074China

The output of new energy represented by wind power and photovoltaic power features volatility and randomness. It is a practical approach to use the guaranteed rate with statistical characteristics to analyze the output coefficient of new energy. However, there is a lack of analysis and demonstration on the value of the new energy output guaranteed rate. To solve this problem, a selection method for the new energy output guaranteed rate considering optimal energy storage configuration is proposed. First, the influence of the new energy output guaranteed rate on the new energy output coefficient is analyzed. Secondly, with the goal of minimizing the comprehensive costs, an optimal configuration model of energy storage based on the output guaranteed rate of new energy is constructed, and particle swarm optimization is used for the optimization solution. Then, according to the optimal energy storage configuration results under different guaranteed rates, a reasonable new energy output guaranteed rate is determined by maximizing the comprehensive benefits obtained from energy storage. Finally, an example applied to the power grid in an area of Guangdong in Southern China is provided to illustrate the effectiveness of the proposed method.

关键词： Energystorage optimization guaranteed output guaranteed rate new energy consumption

Enhanced thermoelectric and mechanical properties of Bi_(0.5)Sb_(1.5)Te_(3) alloy with dispersed yttrium oxide ceramic nanoparticles

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第4期43卷 1758-1768页

作者： Cun-Cheng Li Ming-wei Zhang Ji-wu Xin Lei wei Wen-Yu Zhao School of Materials Science and Engineering Shandong University of TechnologyZibo255000China School of Electrical and Electronic Engineering Nanyang Technological UniversitySingapore639798Singapore State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan430070China

Reducing thermal conductivity while avoiding adverse interfacial reactions during sintering is crucial for improving the thermoelectric performance of Bi_(2)Te_(3)based *** ceramic nanoparticles are good candidates for achieving this *** this study,we designed and prepared a series of p-type Bi_(0.5)Sb_(1.5)Te_(3)nanocomposites decorated with Y_(2)O_(3)ceramic nanoparticles via ball-milling dispersion and spark-plasma *** to the chemical stability of the ceramics,no traces of atomic doping or interfacial reactions were *** measurements revealed that the Y_(2)O_(3)nanoparticles distributed along the grain boundaries acted as energy-dependent carrier-filtering centers to improve the scattering parameter and Seebeck coefficient,contributing to the elevated power factor even with a decreased electrical ***,the incorporated Y_(2)O_(3)nanoparticles and various defect structures they induced effectively strengthened the phonon scattering and suppressed the lattice thermal ***,a peak figure of merit(ZT)of 1.23 at 313 K was achieved for 0.4%Y_(2)O_(3)/Bi_(0.5)Sb_(1.5)Te_(3),which is 13%higher than that of the *** addition,the Vickers hardness of the composite material was 35%higher than that of the *** study demonstrates the effectiveness of ceramic nanoparticles in synergistic ally improving the thermoelectric and mechanical properties,which may be further extended to other thermoelectric systems.

关键词： Bi_(0.5)Sb_(1.5)Te_3 alloy Y_(2)O_(3) ceramic nanoparticles Microstructures Thermoelectric performance Mechanical properties

Effect of droplet characteristics on liquid-phase distribution in spray zone of internal mixing air-mist nozzle

在线全文

学校读者我要写书评

暂无评论

China Foundry 2024年第2期21卷 185-196页

作者： wei-li wu Chang-gui Cheng Yang Li Shi-fa wei De-li Chen The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan 430081China Hubei Provincial Key Laboratory for New Processes of Ironmaking and Steelmaking Wuhan University of Science and TechnologyWuhan 430081China Technology Center Fushun Special Steel Co.Ltd.Fushun 113001LiaoningChina

In continuous casting production,droplet characteristics are important parameters for evaluating the nozzle atomization quality,and have a significant impact on the secondary cooling effect and the slab *** order to study the behavior of atomized droplets after reaching the slab surface and to optimize the spray cooling effect,the influence of droplet diameter and droplet velocity on the migration behavior of droplets in the secondary cooling zone was analyzed by FLUENT *** show that the droplets in the spray zone and on the slab surface are mainly concentrated in the center,thus,the liquid volume fraction in the center is higher than that of either *** the droplet diameter increases,the region of high liquid volume fraction on the slab surface becomes wider,and the liquid phase distribution in the slab width direction becomes *** increasing the droplet velocity at the nozzle exit has little effect on droplet diffusion in the spray zone,the distribution becomes more uneven due to more liquid reaches the slab surface per unit time.A prediction formula of the maximum water flow rate on the slab surface for specific droplet characteristics was proposed based on dimensionless analysis and validated by simulated data.A nozzle spacing of 210 mm was recommended under the working conditions in this study,which ensures effective coverage of the spray water over the slab surface and enhances the distribution uniformity of water flow rate in the transverse direction.

关键词： continuous casting secondary cooling zone internal mixing air-mist nozzle droplet characteristics liquid phase distribution water flow rate