检索结果-南通市图书馆

Chinese Journal of Aeronautics 2024年第2期37卷 471-481页

作者： li wang Jiang li Kang li Yiwei wang Chenyang MA Science and Technology on Combustion Internal Flow and Thermal-Structure LaboratoryNorthwestern Polytechnical UniversityXi’an 710072China

Carbon Nanotubes(CNTs)reinforced Polymer-Matrix Composites(PMCs)is widely used as insulation materials in thermal protection system of aerospace ***,CNTs are prone to oxidation and have high thermal conductivities,which makes it difficult to improve the ablation resistance of insulation materials that contain ***_(2)was encapsulated onto the surface of CNTs(CNTs@SiO_(2)),which were then added to Ethylene Propylene Diene Monomer(EPDM)rubber to prepare the insulation *** analysis and ablation test were used to evaluate the resistance of the insulation materials to thermal oxidation and ***,scanning electron microscopy was performed to analyze their *** revealed that the addition of CNTs@SiO_(2)could visibly reduce the effects of hot corrosion and ablation on insulation *** C-CNTs@SiO_(2)-1 formulation had the best ablative ***,compared with the unencapsulated formulation(C-CNTs-10),the C-CNTs@SiO_(2)-1 formulation reduced the line ablation rate by 51%to 0.0130 mm/s after oxygen-acetylene ***,the ablation mechanism was investigated based on the effects of the CNTs@SiO_(2)additive on their ***,the improvement in ablation performance may be attributed to CNTs@SiO_(2)-induced decreases in thermal conductivity,improvement in the hot corrosion resistance in the char layer,and changes in the microstructure.

关键词： Polymer-Matrix Composites(PMCs) Carbon Nanotubes(CNTs) Thermal properties Ablation Oxidation

Insight into the adsorption behavior and mechanism of trace impurities from H_(2)O_(2) solution on functionalized zirconia by tuning the structure of amino groups

在线全文

学校读者我要写书评

暂无评论

Frontiers of Chemical Science and Engineering 2024年第5期18卷 83-94页

作者： Yu Meng Yitong wang Guozhu li Guozhu liu li wang Key Laboratory for Green Chemical Technology of Ministry Education School of Chemical Engineering and TechnologyTianjin UniversityTianjin 300072China Haihe Laboratory of Sustainable Chemical Transformations Tianjin 300192China

Primary,secondary and tertiary amino-functionalized zirconia(ZrO_(2)-NH_(2),ZrO_(2)-NH and ZrO_(2)-N)was synthesized by the postgrafting method for the adsorption removal of typical metallic ions,phosphate and total oxidizable carbon from a real H_(2)O_(2) ***_(2)-NH_(2),ZrO_(2)-NH and ZrO_(2)-N exhibited similar pore sizes and sequentially increased zeta *** adsorption results of single and binary simulated solutions showed that the removal efficiency increased in the order of Fe^(3+)>Al^(3+)>Ca^(2+)>Na^(+).There is competitive adsorption between metallic ions,and Fe^(3+) has an advantage over the other metals,with a removal efficiency of 90.7%.The coexisting phosphate could promote the adsorption of metallic ions,while total oxidizable carbon had no effect on *** adsorption results of the real H_(2)O_(2)solution showed that ZrO_(2)-NH_(2) exhibited the best adsorption affinity for metallic ions,as did phosphate and total oxidizable carbon,with a total adsorption capacity of 120.9 mg·g_(-1).Density functional theory calculations revealed that the adsorption process of metallic ions involves electron transfer from N atoms to metals and the formation of N-metal bonds.

关键词： adsorption metallic ion phosphate total oxidizable carbon zirconia H_(2)O_(2)

Perception of fundamental science to boost lithium metal anodes toward practical application

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Green Energy & Environment 2024年第3期9卷 454-472页

作者： Jinkun wang li wang Hong Xu li Sheng Xiangming He Institute of Nuclear and New Energy Technology Tsinghua UniversityBeijing100084China

As a key material for lithium metal batteries(LMBs),lithium metal is one of the most promising anode materials to break the bottleneck of battery energy density and a commonly used active material for reference *** lithium anodes are regarded as the holy grail of lithium batteries,decades of exploration have not led to the successful commercialization of LMBs,due mainly to the challenges related to the inherent properties of lithium *** pave the way for further investigation,herein,a comprehensive review focusing on the fundamental science of lithium are ***,the natures of lithium atoms and their isotopes,lithium clusters and lithium crystals are revisited,especially their structural and energetic ***,the electrochemical properties of lithium metal are *** important concepts and scientific questions,including the electronic structure of lithium,influence of high pressure and low temperature on the properties of lithium,factors influencing lithium deposition,generation of lithium dendrites,and electrode potential of lithium in different electrolytes,are explained and analyzed in *** to improve the performance of lithium anodes and thoughtfulness about the electrode potential in lithium battery research are proposed.

关键词： lithium Cluster Crystal Physicochemical property Fundamental science

False Negative Sample Detection for Graph Contrastive Learning

在线全文

学校读者我要写书评

暂无评论

Tsinghua Science and Technology 2024年第2期29卷 529-542页

作者： Binbin Zhang li wang College of Data Science Taiyuan University of TechnologyJinzhong 030600China

Recently,self-supervised learning has shown great potential in Graph Neural Networks (GNNs) through contrastive learning,which aims to learn discriminative features for each node without label information. The key to graph contrastive learning is data augmentation. The anchor node regards its augmented samples as positive samples,and the rest of the samples are regarded as negative samples,some of which may be positive samples. We call these mislabeled samples as “false negative” samples,which will seriously affect the final learning effect. Since such semantically similar samples are ubiquitous in the graph,the problem of false negative samples is very significant. To address this issue,the paper proposes a novel model,False negative sample Detection for Graph Contrastive Learning (FD4GCL),which uses attribute and structure-aware to detect false negative samples. Experimental results on seven datasets show that FD4GCL outperforms the state-of-the-art baselines and even exceeds several supervised methods.

关键词： graph representation learning contrastive learning false negative sample detection

Functional Optical Fiber Sensors Detecting Imperceptible Physical/Chemical Changes for Smart Batteries

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano-Micro Letters 2024年第8期16卷 268-308页

作者： Yiding li li wang Youzhi Song Wenwei wang Cheng lin Xiangming He Institute of Nuclear and New Energy Technology Tsinghua UniversityBeijing 100084People’s Republic of China National Engineering Research Center of Electric Vehicles Beijing Institute of Technology(BIT)Beijing 100081People’s Republic of China Shenzhen Automotive Research Institute of BIT(Shenzhen Research Institute of National Engineering Research Center of Electric Vehicles) Shenzhen 518118People’s Republic of China

The battery technology progress has been a contradictory process in which performance improvement and hidden risks *** the battery is still a“black box”,thus requiring a deep understanding of its internal *** battery should“sense its internal physical/chemical conditions”,which puts strict requirements on embedded sensing *** paper summarizes the application of advanced optical fiber sensors in lithium-ion batteries and energy storage technologies that may be mass deployed,focuses on the insights of advanced optical fiber sensors into the processes of one-dimensional nano-micro-level battery material structural phase transition,electrolyte degradation,electrode-electrolyte interface dynamics to three-dimensional macro-safety *** paper contributes to understanding how to use optical fiber sensors to achieve“real”and“embedded”*** the inherent advantages of the advanced optical fiber sensor,it helps clarify the battery internal state and reaction mechanism,aiding in the establishment of more detailed *** advancements can promote the development of smart batteries,with significant importance lying in essentially promoting the improvement of system ***,with the help of smart batteries in the future,the importance of consistency can be weakened or even *** application of advanced optical fiber sensors helps comprehensively improve the battery quality,reliability,and life.

关键词： Smart battery Advanced embedded optical fiber sensor Battery internal physical/chemical state Quality-reliability-life characteristic

Engineering oxygen vacancies on Tb-doped ceria supported Pt catalyst for hydrogen production through steam reforming of long-chain hydrocarbon fuels

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第4期68卷 181-192页

作者： Zhourong Xiao Changxuan Zhang Peng li Desong wang Xiangwen Zhang li wang Jijun Zou Guozhu li State Key Laboratory of Metastable Materials Science and Technology(MMST) Hebei Key Laboratory of Applied ChemistryCollege of Environmental and Chemical EngineeringYanshan UniversityQinhuangdao 066004China Key Laboratory for Green Chemical Technology of Ministry of Education School of Chemical Engineering and TechnologyTianjin UniversityTianjin 300072China

Steam reforming of long-chain hydrocarbon fuels for hydrogen production has received great attention for thermal management of the hypersonic vehicle and fuel-cell *** this work,Pt catalysts supported on CeO_(2)and Tb-doped CeO_(2)were prepared by a precipitation *** physical structure and chemical properties of the as-prepared catalysts were characterized by powder X-ray diffraction,scanning electron microscopy,transmission electron microscopy,Raman spectroscopy,H_(2)temperature programmed reduction,and X-ray photoelectron *** results show that Tb-doped CeO_(2)supported Pt possesses abundant surface oxygen vacancies,good inhibition of ceria sintering,and strong metal-support interaction compared with CeO_(2)supported *** catalytic performance of hydrogen production via steam reforming of long-chain hydrocarbon fuels(n-dodecane)was *** with 2Pt/CeO_(2),2Pt/Ce_(0.9)Tb_(0.1)O_(2),and 2Pt/Ce_(0.5)Tb_(0.5)O_(2),the 2Pt/Ce_(0.7)Tb_(0.3)O_(2)has higher activity and stability for hydrogen production,on which the conversion of n-dodecane was maintained at about 53.2%after 600 min reaction under 700℃at liquid space velocity of 9 ml·g^(-1)·h^(-1).2Pt/CeO_(2)rapidly deactivated,the conversion of n-dodecane was reduced to only 41.6%after 600 min.

关键词： Steam reforming n-Dodecane Hydrogen production Pt-based catalyst Oxygen vacancy CeO_(2)

An end‐to‐end infant brain parcellation pipeline

在线全文

学校读者我要写书评

暂无评论

Intelligent Medicine 2024年第2期4卷 65-74页

作者： limei wang Yue Sun Weili lin Gang li li wang Department of Radiology and Biomedical Research Imaging Center UNC-Chapel HillNew Caledonia27599USA

Objective Accurate infant brain parcellation is crucial for understanding early brain development;however,it is challenging due to the inherent low tissue contrast,high noise,and severe partial volume effects in infant magnetic resonance images(MRIs).The aim of this study was to develop an end-to-end pipeline that enabled accurate parcellation of infant brain *** We proposed an end-to-end pipeline that employs a two-stage global-to-local approach for accurate parcellation of infant brain ***,in the global regions of interest(ROIs)localization stage,a combination of transformer and convolution operations was employed to capture both global spatial features and fine texture features,enabling an approximate localization of the ROIs across the whole *** the local ROIs refinement stage,leveraging the position priors from the first stage along with the raw MRIs,the boundaries of the ROIs are refined for a more accurate *** We utilized the Dice ratio to evaluate the accuracy of parcellation *** on 263 subjects from National Database for Autism Research(NDAR),Baby Connectome Project(BCP)and Cross-site datasets demonstrated the better accuracy and robustness of our method than other competing *** Our end-to-end pipeline may be capable of accurately parcellating 6-month-old infant brain MRIs.

关键词： Infant brain parcellation Isointense magnetic resonance image Convolutional neural networks Transformer

Prediction models of burst strength degradation for casing with considerations of both wear and corrosion

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第1期21卷 458-474页

作者： Jie-li wang Wen-Jun Huang De-li Gao MOE Key Laboratory of Petroleum Engineering China University of PetroleumBeijing102249China State Key Laboratory of Petroleum Resources and Prospecting China University of PetroleumBeijing102249China

Casing wear and casing corrosion are serious problems affecting casing integrity failure in deep and ultra-deep *** paper aims to predict the casing burst strength with considerations of both wear and ***,the crescent wear shape is simplified into three categories according to common mathematical ***,based on the mechano-electrochemical(M-E)interaction,the prediction model of corrosion depth is built with worn depth as the initial condition,and the prediction models of burst strength of the worn casing and corroded casing are ***,the accuracy of different prediction models is validated by numerical simulation,and the main influence factors on casing strength are *** last,the theoretical models are applied to an ultra-deep well in Northwest China,and the dangerous well sections caused by wear and corrosion are predicted,and the corrosion rate threshold to ensure the safety of casing is *** results show that the existence of wear defects results in a stress concentration and enhanced M-E interaction on corrosion depth *** accuracy of different mathematical models is different:the slot ring model is most accurate for predicting corrosion depth,and the eccentric model is most accurate for predicting the burst strength of corroded *** burst strength of the casing will be overestimated by more than one-third if the M-E interaction is neglected,so the coupling effect of wear and corrosion should be sufficiently considered in casing integrity evaluation.

关键词： Deep well Casing integrity Casing wear Casing corrosion Burst strength

2D–3D dual carbon layer confined ultrasmall VN nanoparticles for improving lithium-ion storage in hybrid capacitors

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第1期43卷 65-75页

作者： Zhao-Wei Hu Hui-Fang li Peng wang Wan-li wang Lei Yang Xiao-Jun wang Zhi-Ming liu College of Electromechanical Engineering Shandong Engineering Laboratory for Preparation and Application of High-Performance Carbon-MaterialsQingdao University of Science&TechnologyQingdao 266061China Research Center for Intelligent and Wearable Technology College of Textiles and ClothingQingdao UniversityQingdao 266071China

lithium-ion capacitors(liCs) of achieving high power and energy density have garnered significant attention. However, the kinetics unbalance between anode and cathode can impede the application of liCs. Vanadium nitride(VN) with a high theoretical specific capacity(~ 1200 m Ah·g^(-1)) is a better pseudocapacitive anode to match the response of cathode in liCs. However, the insertion/extraction of li-ions in VN's operation results in significant volume expansion. Herein, the VN/N-r GO-5composite that three-dimentional(3D) dicyandiamidederived-carbon(DDC) tightly wrapped VN quantum dots(VN QDTs) on two-dimentional(2D) reduced graphene oxid(r GO) was prepared by a facile strategy. The VN QDTs can reduce ion diffusion length and improve charge transfer kinetics. The 2D r GO as a template provides support for nanoparticle dispersion and improves electrical conductivity. The 3D DDC tightly encapsulated with VN QDTs mitigates agglomeration of VN particles as well as volume expansion. Correspondingly, the liCs with VN/Nr GO-5 composite as anode and activated carbon(AC) as cathode were fabricated, which exhibits a high energy density and power density. Such strategy provides a perspective for improving the electrochemical properties of liC anode materials by suppressing volume expansion and enhancing conductivity.

关键词： Vanadium nitride(VN)quantum dots Reduced graphene oxide(rGO)nanosheets Dicyandiamide-derived-carbon 2D–3D dual carbon layer lithium-ion capacitors

Effect of Al_(2)O_(3)fiber on twin intersections-induced dynamic recrystallization in fine-grained TiAl matrix composite

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2024年第5期172卷 1-14页

作者： Yaofeng Luo Yan wang li wang Bin liu Yong liu State Key Laboratory of Powder Metallurgy Central South UniversityChangsha 410083China

Dynamic recrystallization(DRX)is of great significance for the thermomechanical processing and microstructural regulation of TiAl ***,the underlying DRX mechanism remains poorly *** this study,an Avrami kinetics model for DRX was established,which was capable of predicting the DRX fraction *** addition,the effect of Al_(2)O_(3)short fiber on the DRX mechanisms of TiAl matrix composite during the isothermal compression was investigated for the first *** re-sults showed that other than inhibiting DRX by particles in the TiAl matrix composites,the addition of Al_(2)O_(3)short fiber accelerated a novel DRX process,which was induced by twinning and twin intersec-tions(TDRX).Thus,this composite exhibited a higher DRX rate than that of the as-cast TiAl monolithic *** origin of the twin intersection and TDRX for the composite was *** stress concentration near the Al_(2)O_(3)fiber was above the critical shear stress for twinning and thus was favorable for the formation of twinning and twin *** high stored strain energy at the regions of twins and twin intersections provided the driving force for *** accelerated the grain refinement in the TiAl matrix near the Al_(2)O_(3)*** present findings would provide a new perspective on DRX mechanisms,and provide the scientific guidance for optimizing the microstructures of TiAl matrix composites.

关键词： TiAl matrix composite Al_(2)O_(3)fiber Twin intersection Dynamic recrystallization