检索结果-南通市图书馆

Resilience-incorporated seismic risk assessment of precast concrete frames with“dry”connections

Earthquake Engineering and Engineering Vibration 2024年第2期23卷 403-425页

作者： wu Chenhao Tang Yuchuan Cao Xuyang wu gang Key Laboratory of Concrete and Prestressed Concrete Structures of the Ministry of Education Nanjing 211102China Department of Civil and Environmental Engineering University of CaliforniaLos AngelesCA 90095USA School of Civil Engineering Southeast UniversityNanjing 211102China College of Civil and Transportation Engineering Hohai UniversityNanjing 210024China

A resilience-incorporated risk assessment framework is proposed and demonstrated in this study to manifest the advantageous seismic resilience of precast concrete frame(PCF)structures with“dry”connections in terms of their low damage and rapid recovery.The framework integrates various uncertainties in the seismic hazard,fragility,capacity,demand,loss functions,and post-earthquake recovery.In this study,the PCF structures are distinguished from ordinary reinforced concrete frame(RCF)structures by characterizing multiple limit states for the PCF based on its unique damage mechanisms.Accordingly,probabilistic story-wise pushover analyses are performed to yield story-wise capacities for the predefined limit states.In the seismic resilience analysis,a step-wise recovery model is proposed to idealize the functionality recovery process,with separate considerations of the repair and non-repair events.The recovery model leverages the economic loss and downtime to delineate the stochastic post-earthquake recovery curves for the resilience loss estimation.As such,contingencies in the probabilistic post-earthquake repairs are incorporated and the empirical judgments on the recovery parameters are largely circumvented.The proposed framework is demonstrated through a comparative study between two“dry”connected PCFs and one RCF designed as alternative structural systems for a prototype building.The results from the risk quantification indicate that the PCFs show reduced loss hazards and lower expected losses relative to the RCF.Particularly,the PCF equipped with energy dissipation devices at the“dry”connections largely reduces the expected economic loss,downtime,and resilience loss by 29%,56%,and 60%,respectively,compared to the RCF.

关键词： precast concrete frame non-emulative precast system seismic resilience seismic risk functional recovery

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Pulses in ground motions identified through surface partial matching and their impact on seismic rocking consequence

引用

Earthquake Engineering and Engineering Vibration 2024年第1期23卷 35-50页

作者： Tang Yuchuan Wang Jiankang wu gang School of Civil Engineering Southeast UniversityKey Laboratory of Concrete and Prestressed Concrete Structures of the Ministry of EducationNanjing 211102China National and Local Joint Engineering Research Center for Intelligent Construction and Maintenance Nanjing 211102China

In seismology and earthquake engineering,it is fundamental to identify and characterize the pulse-like features in pulse-type ground motions.To capture the pulses that dominate structural responses,this study establishes congruence and shift relationships between response spectrum surfaces.A similarity search between spectrum surfaces,supplemented with a similarity search in time series,has been applied to characterize the pulse-like features in pulse-type ground motions.The identified pulses are tested in predicting the rocking consequences of slender rectangular blocks under the original ground motions.Generally,the prediction is promising for the majority of the ground motions where the dominant pulse is correctly identified.

关键词： velocity pulse ground motion surface similarity rocking overturning

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Design and Implementation of Nonlinear Precoding for MIMO-SDMA Toward 6G Wireless

引用

China Communications 2024年第1期21卷 69-87页

作者： Chaowu wu Yue Xiao Shu Fang gang wu National Key Laboratory of Wireless Communications University of Electronic Science and Technology of ChinaChengdu 611731China

In this paper,we present a novel and robust nonlinear precoding(NLP)design and detection structure specifically tailored for multiple-input multipleoutput space division multiple access(MIMO-SDMA)systems toward 6G wireless.Our approach aims to effectively mitigate the impact of imperfect channel estimation by leveraging the channel fluctuation mean square error(MSE)for reconstructing a highly accurate precoding matrix at the transmitter.Furthermore,we introduce a simplified receiver structure that eliminates the need for equalization,resulting in reduced interference and notable enhancements in overall system performance.We conduct both computer simulations and experimental tests to validate the efficacy of our proposed approach.The results reveals that the proposed NLP scheme offers significant performance improvements,making it particularly well-suited for the forthcoming 6G wireless.

关键词： MIMO-SDMA nonlinear precoding Tomlinson-Harashima precoding(THP) vector perturbation(VP)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Method for determining the position of landslide slip-surface with a typical inclinometric curves

引用

Journal of Mountain Science 2024年第2期21卷 413-432页

作者： CHEN Hao wu Hong-gang Ocean College Zhejiang UniversityZhoushan 316000China China Northwest Research Institute Co.Ltd.of CREC Lanzhou 730070China

In the actual monitoring of deep hole displacement,the identification of slip surfaces is primarily based on abrupt changes observed in the inclinometric curve.In conventional identification methods,inclinometric curves exhibiting indications of sliding can be categorized into three types:B-type,D-type,and r-type.The position of the slip surface is typically determined by identifying the depth corresponding to the point of maximum displacement mutation.However,this method is sensitive to the interval of measurement points and the observation scale of the coordinate axes and suffers from unclear sliding surfaces and uncertain values.Based on the variation characteristics of these diagonal curves,we classified the landslide into three components:the sliding body,the sliding interval,and the immobile body.Moreover,three different generalization models were established to analyze the relationships between the curve form and the slip surface location based on different physical indicators such as displacement rate,relative displacement,and acceleration.The results show that the displacement rate curves of an r-type slope exhibit a clustering feature in the sliding interval,and by solving for the depth of discrete points within the step phase,it is possible to determine the location of the slip surface.On the other hand,D-type slopes have inflection points in the relative displacement curve located at the slip surface.The acceleration curves of B-type slopes exhibit clustering characteristics during the sliding interval,while the scattered acceleration data demonstrate wandering characteristics.Consequently,the slip surface location can be revealed by solving the depth corresponding to the maximum acceleration with cubic spline interpolation.The approach proposed in this paper was applied to the monitoring data of a landslide in Yunnan Province,China.The results indicate that our approach can accurately identify the slip surface location and enable computability of its position,thereby enhancing applicability and relia

关键词： Inclinometric curve Slip-surface position Displacement rate Relative displacement Acceleration

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Method for triangular fuzzy multiple attribute decision making based on two-dimensional density operator method

引用

Journal of Systems Engineering and Electronics 2024年第1期35卷 178-185页

作者： LIN Youliang LI wu LIU gang HUANG Dong School of Economics and Management Hunan Institute of Science and TechnologyYueyang 414000China Hunan Vocational College for Nationalities Yueyang 414000China School of Information Science and Engineering Hunan Institute of Science and TechnologyYueyang 414000China

Aiming at the triangular fuzzy(TF)multi-attribute decision making(MADM)problem with a preference for the distribution density of attribute(DDA),a decision making method with TF number two-dimensional density(TFTD)operator is proposed based on the density operator theory for the decision maker(DM).Firstly,a simple TF vector clustering method is proposed,which considers the feature of TF number and the geometric distance of vectors.Secondly,the least deviation sum of squares method is used in the program model to obtain the density weight vector.Then,two TFTD operators are defined,and the MADM method based on the TFTD operator is proposed.Finally,a numerical example is given to illustrate the superiority of this method,which can not only solve the TF MADM problem with a preference for the DDA but also help the DM make an overall comparison.

关键词： fuzzy decision making clustering density operator multi-attribute decision making(MADM)

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Comparing short-term outcomes of robot-assisted and conventional laparoscopic total mesorectal excision surgery for rectal cancer in elderly patients

引用

World Journal of Gastrointestinal Surgery 2024年第5期16卷 1271-1279页

作者： Hao Yang gang Yang Wen-Ya wu Fang Wang Xue-Quan Yao Xiao-Yu wu The Affiliated Hospital of Nanjing University of Chinese Medicine Nanjing University of Chinese MedicineNanjing 210029Jiangsu ProvinceChina Department of Surgical Oncology The Affiliated Hospital of Nanjing University of Chinese MedicineNanjing 210029Jiangsu ProvinceChina

BACKGROUND Da Vinci Robotics-assisted total mesorectal excision(TME)surgery for rectal cancer is becoming more widely used.There is no strong evidence that roboticassisted surgery and laparoscopic surgery have similar outcomes in elderly patients with TME for rectal cancer.AIM To determine the improved oncological outcomes and short-term efficacy of robot-assisted surgery in elderly patients undergoing TME surgery.METHODS A retrospective study of the clinical pathology and follow-up of elderly patients who underwent TME surgery at the Department of Gastrointestinal Oncology at the Affiliated Hospital of Nanjing University of Chinese Medicine was conducted from March 2020 through September 2023.The patients were divided into a robotassisted group(the R-TME group)and a laparoscopic group(the L-TME group),and the short-term efficacy of the two groups was compared.RESULTS There were 45 elderly patients(≥60 years)in the R-TME group and 50 elderly patients(≥60 years)in the L-TME group.There were no differences in demographics,conversion rates,or postoperative complication rates.The L-TME group had a longer surgical time than the R-TME group[145(125,187.5)vs 180(148.75,206.25)min,P=0.005),and the first postoperative meal time in the L-TME group was longer than that in the R-TME(4 vs 3 d,P=0.048).Among the sex and body mass index(BMI)subgroups,the R-TME group had better out-comes than did the L-TME group in terms of operation time(P=0.042)and intraoperative assessment of bleeding(P=0.042).In the high BMI group,catheter removal occurred earlier in the R-TME group than in the L-TME group(3 vs 4 d,P=0.001),and autonomous voiding function was restored.CONCLUSION The curative effect and short-term efficacy of robot-assisted TME surgery for elderly patients with rectal cancer are similar to those of laparoscopic TME surgery;however,robotic-assisted surgery has better short-term outcomes for individuals with risk factors such as obesity and pelvic stenosis.Optimizing the learning curve can shorten the operation time,reduce the

关键词： Robotic surgery Laparoscopy Rectal cancer Total mesorectal excision Elderly

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Characterization of physicochemical and immunogenic properties of allergenic proteins altered by food processing:a review

引用

Food Science and Human Wellness 2024年第3期13卷 1135-1151页

作者： Enning Zhou Qiangqiang Li Dan Zhu gang Chen Liming wu Institute of Apicultural Research Chinese Academy of Agricultural SciencesBeijing 100093China Department of Food Science University of OtagoDunedin 9016New Zealand School of Food and Health Beijing Technology and Business UniversityBeijing 100048China

Food allergens are mainly naturally-occurring proteins with immunoglobulin E(IgE)-binding epitopes.Understanding the structural and immunogenic characteristics of allergenic proteins is essential in assessing whether and how food processing techniques reduce allergenicity.We here discuss the impacts of food processing technologies on the modification of physicochemical,structural,and immunogenic properties of allergenic proteins.Detection techniques for characterizing changes in these properties of food allergens are summarized.Food processing helps to reduce allergenicity by aggregating or denaturing proteins,which masks,modifies,or destroys antigenic epitopes,whereas,it cannot eliminate allergenicity completely,and sometimes even improves allergenicity by exposing new epitopes.Moreover,most food processing techniques have been tested on purified food allergens rather than food products due to potential interference of other food components.We provide guidance for further development of processing operations that can decrease the allergenicity of allergenic food proteins without negatively impacting the nutritional profile.

关键词： Food allergens Protein structural characterization Immunogenicity evaluation Food processing modification

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Characteristics of Particulate Matter Emissions for Low-Sulfur Heavy Oil Used in Low-Speed Two-Stroke Diesel Engines of Ocean-Going Ships

引用

Journal of Thermal Science 2024年第2期33卷 739-750页

作者： wu gang MA Qianli WEI Lijiang JIANG Guohe WANG Tengfei LI Tie Merchant Marine College Shanghai Maritime UniversityShanghai201306China State Key Laboratory of Ocean Engineering Shanghai Jiao Tong UniversityShanghai200240China

In this work,particulate matter(PM) emissions from a large two-stroke,low-speed marine diesel engine were investigated when the engine was operated with low-sulfur heavy fuel oil(HFO) at various loads.Particle samples were collected in situ from the engine exhaust to determine the detailed physical and chemical properties.The nanostructure and morphology of the nanoparticles were analyzed using transmission electron microscopy images(TEM).The results show that volatile organic carbon(OC) accounts for more than 80% in the HFO particles and leads to an increase in particle size.The thermodynamic conditions of a low-speed engine favor the behavior of capturing the soluble organic components.A large number of spherical char HFO particles with aerodynamic diameters of 0.2 μm-0.5 μm and a suspected inner metal core were detected.The two peak aerodynamic diameters of the HFO nanoparticles are 15 nm and 86 nm.The morphological differences among the HFO nanoparticles in varied engine conditions represent the formation process from primary nascent particles to mature graphitized particles caused by thermodynamics.The above study will be valuable for understanding the characteristics of PM emissions from low-sulfur HFO to achieve the ship PM emissions reduction target.

关键词： low-speed diesel engine maritime regulations heavy fuel oil TEM particles size and distribution

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Enhancing the mechanical properties of casting eutectic high -entropy alloys via W addition

引用

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1364-1372页

作者： Xu Yang Dezhi Chen Li Feng gang Qin Shiping wu Ruirun Chen National Key Laboratory for Precision Hot Processing of Metals School of Material Science and EngineeringHarbin Institute of TechnologyHarbin 150001China

The effect of W element on the microstructure evolution and mechanical properties of Al_(1.25)CoCrFeNi3 eutectic high-entropy alloy and Al_(1.25)CoCrFeNi_(3-x)W_(x)(x=0,0.05,0.1,0.3,and 0.5;atomic ratio)high-entropy alloys(HEAs)were explored.Results show that the Al_(1.25)CoCrFeNi_(3-x)W_(x) HEAs are composed of face-centered cubic and body-centered cubic(BCC)phases.As W content increases,the microstructure changes from eutectic to dendritic.The addition of W lowers the nucleation barrier of the BCC phase,decreases the valence electron concentration of the HEAs,and replaces Al in the BCC phase,thus facilitating the nucleation of the BCC phase.Tensile results show that the addition of W greatly improves the mechanical properties,and solid-solution,heterogeneous-interface,and second-phase strengthening are the main strengthening mechanisms.The yield strength,tensile strength,and elongation of the Al_(1.25)CoCrFeNi2.95W0.05 HEA are 601.44 MPa,1132.26 MPa,and 15.94%,respectively,realizing a balance between strength and plasti-city.The fracture mode of the Al_(1.25)CoCrFeNi_(3-x)W_(x) HEAs is ductile–brittle mixed fracture,and the crack propagates and initiates in the BCC phase.The eutectic lamellar structure impedes crack propagation and maintains plasticity.

关键词： high-entropy alloy microstructure mechanical property fracture behavior

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Step‑by‑Step Modulation of Crystalline Features and Exciton Kinetics for 19.2%Efficiency Ortho‑Xylene Processed Organic Solar Cells

引用

Nano-Micro Letters 2024年第2期16卷 258-272页

作者： Bosen Zou Weiwei wu Top Archie Dela Pena Ruijie Ma Yongmin Luo Yulong Hai Xiyun Xie Mingjie Li Zhenghui Luo Jiaying wu Chuluo Yang gang Li He Yan Department of Chemistry Department of Chemistry and Hong Kong Branch of Chinese National Engineering Research Center for Tissue Restoration and Reconstruction The Hong Kong University of Science and TechnologyClear Water BayHong KongPeople’s Republic of China Department of Electronic and Information Engineering Research Institute for Smart Energy(RISE)Guangdong‑Hong Kong‑Macao(GHM)Joint Laboratory for Photonic‑Thermal‑Electrical Energy Materials and DevicesThe Hong Kong Polytechnic UniversityHung HomKowloonHong Kong 999077People’s Republic of China The Hong Kong University of Science and Technology Function HubAdvanced Materials ThrustNanshaGuangzhou 511400People’s Republic of China Department of Applied Physics The Hong Kong Polytechnic UniversityHong KongPeople’s Republic of China Shenzhen Key Laboratory of New Information Display and Storage Materials College of Materials Science and EngineeringShenzhen UniversityShenzhen 518060People’s Republic of China

With plenty of popular and effective ternary organic solar cells(OSCs)construction strategies proposed and applied,its power conversion efficiencies(PCEs)have come to a new level of over 19%in single-junction devices.However,previous studies are heavily based in chloroform(CF)leaving behind substantial knowledge deficiencies in understanding the influence of solvent choice when introducing a third component.Herein,we present a case where a newly designed asymmetric small molecular acceptor using fluoro-methoxylated end-group modification strategy,named BTP-BO-3FO with enlarged bandgap,brings different morphological evolution and performance improvement effect on host system PM6:BTP-eC9,processed by CF and ortho-xylene(o-XY).With detailed analyses supported by a series of experiments,the best PCE of 19.24%for green solvent-processed OSCs is found to be a fruit of finely tuned crystalline ordering and general aggregation motif,which furthermore nourishes a favorable charge generation and recombination behavior.Likewise,over 19%PCE can be achieved by replacing spin-coating with blade coating for active layer deposition.This work focuses on understanding the commonly met yet frequently ignored issues when building ternary blends to demonstrate cutting-edge device performance,hence,will be instructive to other ternary OSC works in the future.

关键词： Organic solar cells Ternary design Solvent selection Flouro-methoxylated end group Morphological ordering

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：