检索结果-南通市图书馆

Influence of Organic Amendments on Adsorption, Desorption and Leaching of Methiopyrisulfuron in Soils

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Journal of Integrative Agriculture 2013年第9期12卷 1589-1597页

作者： wu chun-xian NIE Guo ZHANG Zhong-ming WANG Guang-cheng GAO Li-ming WANG Jin-jun College of Plant Protection Southwest University Institute of the Control of Agrochemical of Sichuan Province

Methiopyrisulfuron is a novel sulfonylurea herbicide with good activity for annual broadleaf and gramineal weeds control. Present study was to investigate the effects of organic amendments （including peat （PE）, sewage sludge （SS）, and humic acid （HA）） on adsorption, desorption and leaching of methiopyrisulfuron in soils. The batch equilibration technique was applied for adsorption-desorption experiments and the leaching was tested through soil column simulated experiments under laboratory conditions. The Freundlich model may well describe adsorption-desorption of methiopyrisulfuron on organic amendments, the natural soil, and amended soils. Organic amendments could not only greatly increase the adsorption capacity of methiopyrisulfuron, but also significantly enhance the hysteresis of desorption of methiopyrisulfuron. The correlations between Kf_ads and organic matter content of amended soils were significant, and the correlations between H and soil organic matter in amended soils with PE, SS, and HA were significant too. The results of soil column experiments indicated that organic amendments greatly decreased leaching of methiopyrisulfuron. This study suggested that PE, SS, and HA could greatly influence environmental behavior of methiopyrisulfuron in soils. Use of organic amendments might be an effective management practice for controlling potential pollution of methiopyrisulfuron to environment.

关键词： organic amendment adsorption desorption leaching methiopyrisulfuron soil

Effect of stress-relief annealing on thermal fatigue cracks for die-casting die steels

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第5期31卷 1164-1176页

作者： Zhi-xiong Bai Xiao-chun wu School of Materials Science and Engineering Shanghai UniversityShanghai200444China

The effect of stress-relief annealing at different stages of thermal fatigue tests on crack growth was investigated using a self-built thermal cycle *** results showed that annealing could limit crack expansion *** reduced dislocation density and released the accumulation of residual *** addition,the strain accumulation in carbides was reduced by this *** was also found that double annealing was even more effective at inhibiting crack expansion compared to single stress-relief *** 1000 cycles,the maximum crack length was reduced by 31.1%and 45.2%for the samples after using the optimal single and double annealing processes,*** single stress-relief annealing,earlier annealing provides more benefit in delaying crack ***,effective double stress-relief annealing requires a suitable time interval between the annealing ***,after 800 cycles,surface hardness decreased significantly accompanied by an increase in the size and number of carbides,and cracks expanded predominantly along grain boundaries.

关键词： Thermal fatigue Steel Carbide Stress-relief annealing Dislocation Residual stress

Improvement of the nutritional support management system for patients in intensive care units

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Psychiatry 2024年第1期14卷 44-52页

作者： Yuan-Yuan Zhang chun-Yi Wang Dong-xian Guo Hai-Nu Gao xian-Shan Jin Yan-Li wu Lu-Han Chen Zhi-xian Feng Department of Critical Care Medicine Shulan(Hangzhou)HospitalZhejiang Shuren University Shulan International Medical CollegeHangzhou 310022Zhejiang ProvinceChina Department of Information Shulan(Hangzhou)HospitalZhejiang Shuren University Shulan International Medical CollegeHangzhou 310022Zhejiang ProvinceChina Department of Pharmacy Shulan(Hangzhou)HospitalZhejiang Shuren University Shulan International Medical CollegeHangzhou 310022Zhejiang ProvinceChina Department of Nutrition Shulan(Hangzhou)HospitalZhejiang Shuren University Shulan International Medical CollegeHangzhou 310022Zhejiang ProvinceChina Administrative Office Shulan(Hangzhou)HospitalZhejiang Shuren University Shulan International Medical CollegeHangzhou 310022Zhejiang ProvinceChina

BACKGROUND Nutritional support for patients hospitalized in the intensive care unit(ICU)is an important part of clinical treatment and care,but there are significant implementation *** To introduce a modified nutritional support management system for ICU patients based on closed-loop information management and psychological *** The division of functions,personnel training,system construction,development of an intelligent decision-making software system,quality control,and improvement of the whole process were carried out to systematically manage nutritional support for ICU *** Following the implementation of the whole process management system,the scores of ICU medical staff’s knowledge,attitudes/beliefs,and practices regarding nutritional support were comprehensively *** proportion of hospital bed-days of total enteral nutrition(EN)in ICU patients increased from 5.58%to 11.46%,and the proportion of EN plus parenteral nutrition increased from 42.71%to 47.07%.The rate of EN initiation within 48 h of ICU admission increased from 37.50%to 48.28%,and the EN compliance rate within 72 h elevated from 20.59%to 31.72%.After the implementation of the project,the Self-rating Anxiety Scale score decreased from 61.07±9.91 points to 52.03±9.02 points,the Self-rating Depression Scale score reduced from 62.47±10.50 points to 56.34±9.83 points,and the ICU stay decreased from 5.76±2.77 d to 5.10±2.12 *** The nutritional support management system based on closed-loop information management and psychological counseling achieved remarkable results in clinical applications in ICU patients.

关键词： Closed-loop information Psychological counseling Intensive care unit patients Nutritional support Management system

Delving into high-quality SVBRDF acquisition: A new setup and method

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computational Visual Media 2024年第3期10卷 523-541页

作者： Chuhua xian Jiaxin Li Hao wu Zisen Lin Guiqing Li School of Computer Science and Engineering South China University of TechnologyGuangzhou 510006China Guangdong Shidi Intelligence Technology Ltd.Guangzhou 510000China

In this study, we present a new andinnovative framework for acquiring high-qualitySVBRDF maps. Our approach addresses the limitations of the current methods and proposes a newsolution. The core of our method is a simple hardwaresetup consisting of a consumer-level camera, LEDlights, and a carefully designed network that canaccurately obtain the high-quality SVBRDF propertiesof a nearly planar object. By capturing a ﬂexiblenumber of images of an object, our network usesdifferent subnetworks to train different property mapsand employs appropriate loss functions for each ofthem. To further enhance the quality of the maps, weimproved the network structure by adding a novel skipconnection that connects the encoder and decoder withglobal features. Through extensive experimentation usingboth synthetic and real-world materials, our resultsdemonstrate that our method outperforms previousmethods and produces superior results. Furthermore,our proposed setup can also be used to acquire physicallybased rendering maps of special materials.

关键词： acquisition setup SVBRDF acquisition material capture global skip connection

Microstructure Evolution and Nanomechanical Behavior of Micro-Area in Molten Pool of Selective Laser Melting(CoCrNi)_(82)Al_(9)Ti_(9)High-Entropy Alloy

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第6期37卷 1019-1033页

作者： Hong-Wei Zhang Li-Wei Lan Zhe-Yu Yang Chang-chun Li Wen-xian Wang College of Materials Science and Engineering Taiyuan University of TechnologyTaiyuan030024China Ministry of Education Key Laboratory of Interface Science and Engineering in Advanced MaterialsTaiyuan University of TechnologyTaiyuan030024China Shanxi-Zhejiang University New Materials and Chemical Research Institute Taiyuan030032China

In this work,the phase evolution mechanism and nanomechanical properties of(CoCrNi))(82)Al_(9)Ti_(9)high-entropy alloy(HEA)prepared by selective laser melting(SLM)in the molten pool were *** HEA contains multiple primary elements and undergoes high-temperature gradient and rapid cooling during *** leads to significant inhomogeneity of nano-scale microstructure characteristics and instability of *** optimizing process parameters,the microstructure evolution at the optimal parameter volume energy density of 440 J/mm^(3)was studied.A phase transition from BCC to FCC occurred in the melt *** the micro-area of the melt pool results in a temperature rise and the combustion-induced loss of Al ***,the Ni element content increases significantly outside the melt *** process enhances the phase stability of FCC and facilitates phase ***,rapid cooling leads to the formation of distinctive ultrafine equiaxial crystals inside the melt pool,accompanied by the generation of intracrystalline needle-like nano-scale *** the melt pool,the accumulation of energy results in the formation of coarse ***,the nano-hardness inside the molten pool is remarkably high at 11.79 GPa,while the outside the molten pool is reduced to 9.58 *** the fracture toughness outside the melt pool also *** with inside the melt pool,the residual stress outside the melt pool changed from compressive to tensile stress and decreased from 603.28 to 322.84 MPa.

关键词： High-entropy alloys Selective laser melting Microstructure evolution Nanoindentation

Projected changes in Köppen-Trewartha climate zones under 1.5-4℃global warming targets over mid-high latitudes of Northern Asia using an ensemble of RegCM4 simulations

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Advances in Climate Change Research 2024年第2期15卷 185-196页

作者： Jie wu Xue-Jie GAO xian-Bing TANG Filippo GIORGI School of Geography and Environmental Engineering Gannan Normal UniversityGanzhou 341000China Climate Change Research Center Institute of Atmospheric PhysicsChinese Academy of SciencesBeijing 100029China Collaborative Innovation Center on Forecast and Evaluation of Meteorological Disasters Nanjing University of Information Science&TechnologyNanjing 210044China University of Chinese Academy of Sciences Beijing 100049China The Abdus Salam International Centre for Theoretical Physics Trieste 34100Italy

Mid-high latitude Northern Asia is one of the most vulnerable and sensitive areas to global warming,but relatively less studied *** used an ensemble of a regional climate model(RegCM4)projections to assess future changes in surface air temperature,precipitation and Köppen-Trewartha(K-T)climate types in Northern Asia under the 1.5-4℃global warming ***4 is driven by five CMIP5 global models over an East Asia domain at a grid spacing of 25 *** of the present day(1986-2005)simulations shows that the ensembles of RegCM4(ensR)and driving GCMs(ensG)reproduce the major characters of the observed temperature,precipitation and K-T climate zones reasonably *** and more realistic spatial detail is found in RegCM4 compared to the driving GCMs.A general warming and overall increases in precipitation are projected over the region,with these changes being more pronounced at higher warming *** projected warming by ensR shows different spatial patterns,and is in general lower,compared to ensG in most months of the year,while the percentage increases of precipitation are maximum during the cold *** future changes in K-T climate zones are characterized by a substantial expansion of Dc(temperature oceanic)and retreat of Ec(sub-arctic continental)over the region,reaching∼20%under the 4℃warming *** most notable change in climate types in ensR is found over Japan(∼60%),followed by Southern Siberia,Mongolia,and the Korean Peninsula(∼40%).The largest change in the K-T climate types is found when increasing from 2 to 3℃.The results will help to better assess the impacts of climate change and in implementation of appropriate adaptation measures over the region.

关键词： Mid-high latitudes of Northern Asia Köppen climate zones Global warming targets Regional climate model

Al-containing Ge-rich IWV:rapid synthesis via interzeolite transformation and application in Baeyer-Villiger oxidation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第7期67卷 2282-2291页

作者： Meichen Jiao chunmin Jia Hao Xu Peng wu xian-Ming Zhang School of Chemistry&Material Science Shanxi Normal UniversityTaiyuan 030006China Shanghai Key Laboratory of Green Chemistry and Chemical Processes School of Chemistry and Molecular EngineeringEast China Normal UniversityShanghai 200062China School of Chemistry Taiyuan University of TechnologyTaiyuan 030024China

Ge-containing Lewis acidic zeolites are typically synthesized using a conventional hydrothermal strategy from amorphous silica sources,through a long time-and energy-consuming approach limiting their wide *** study reports a rapid synthesis strategy for a series of IWV aluminogermanosilicate zeolites(T-x-Al)with a wide range of Si/Ge molar ratios(5–15)by interzeolite transformation of dealuminated FAU(DA-FAU).Notably,Ge-rich IWV could be obtained with crystallization time as short as one day by the equimolecular Si/Ge ratio *** effect of synthetic parameters was investigated and the obtained T-x-Al samples were characterized by XRD,SEM,EDS,ICP,^(29)Si and^(27)Al MAS NMR,FTIR,and N_(2)physisorption *** with a previously reported IWV germanosilicate(H-3),T-x-Al displayed a better catalytic activity in Baeyer-Villiger(BV)oxidation,attributed to the presence of the active framework Ge sites with the assistance of the extraframework Al *** cyclic catalysis tests revealed that the presence of framework Al species contributed to the stability of the ***,T-x-Al,with 14-membered ring(MR)supercages,outperformed the typical 12-MR Sn-beta catalyst in the BV oxidation of large ketone-like 2-admantanone,indicating a promising potential application in the macromolecular catalytic process.

关键词： Ge-rich IWV interzeolite transformation Al assistance Baeyer-Villiger oxidation

Effects of Environmental Factors on Corrosion Behavior of E690 Steel in Simulated Marine Environment

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第4期37卷 678-694页

作者： Jingjing Peng Jing Liu Shen Zhang Zhihui Wang xian Zhang Kaiming wu Collaborative Innovation Center for Advanced Steels Hubei Province Key Laboratory of Systems Science in Metallurgical ProcessThe State Key Laboratory of Refractories and MetallurgyWuhan University of Science and TechnologyWuhan430081China

The effects of hydrostatic pressure, dissolved oxygen, temperature and flow velocity, and their interaction on the corrosion rates of E690 high-strength steel (HSS) in simulated marine environments were studied using response surface methodology. The results show that the flow velocity exerts the most significant influence on the corrosion rate of E690 HSS. Consequently, the corrosion behavior of E690 HSS under varying flow velocities were analyzed profoundly from initial pitting corrosion to long-term corrosion properties. The results indicate that the flow state facilitates the mass transfer and enhances the adsorption tendency of Cl− by enhancing the electrochemical activity of the steel surface. These factors accelerate the electrochemical reactions, resulting in increased pitting density, depth and the long-term corrosion rates in dynamic seawater environments.

关键词： E690 steel Simulated marine environment Corrosion behavior Flow velocity Response surface methodology(RSM)

Analysis method and experimental study of ice accumulation detection signal based on Lamb waves

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第8期37卷 388-403页

作者： Yanxin ZHANG Hongjian ZHANG xian YI Binrui wu xianlei GUAN Jianjun XIONG Key Laboratory of Icing and Anti/De-icing China Aerodynamics Research and Development CenterMianyang 621000China State Key Laboratory of Aerodynamics China Aerodynamics Research and Development CenterMianyang 621000China

A quantitative identification method for in-flight icing has the capability to significantly enhance the safety of aircraft *** guided waves have the unique advantage of detecting icing in a relatively large area,but quantitative identification of ice layers is a *** this paper,a quantitative identification method of ice accumulation based on ultrasonic guided waves is ***,a simulation model for the wave dynamics of piezoelectric coupling in three dimensions is established to analyze the propagation characteristics of Lamb waves in a structure consisting of an aluminum plate and an ice *** wavelet transform method is utilized to extract the Time of Flight(ToF)or Time of Delay(ToD)of S_(0)/B_(1) mode waves,which serves as a characteristic parameter to precisely determine and assess the level of ice ***,an experimental system is developed to evaluate the feasibility of Lamb waves-based icing real-time detection in the presence of spray ***,a combination of the Hampel median filter and the moving average filter is developed to analyze ToF/ToD *** simulation results reveal a positive correlation between geometric dimensions(length,width,thickness)of the ice layer and ToF/ToD of B1 mode waves,indicating their potential as indicators for quantifying ice *** results of real-time icing detection indicate that ToF/ToD will reach greater peak values with the growth of the arbitrary-shaped ice layer until saturation to effectively predict the simulation *** study lays a foundation for the practical application of quantitative icing detection via ultrasonic guided waves.

关键词： Ice Ice accumulation Ultrasonic sensor Ultrasonic guided wave Lamb wave Wavelet transform