检索结果-南通市图书馆

A synergetic strategy of NIR-Ⅱ squaraine dyes with ultrahigh photothermal conversion efficiency for photothermal therapy

引用

Science China Chemistry 2024年第2期67卷 612-621页

作者： Yigang wang Guomin Xia Junhui wang Mingda wang Weihan Guo Manman Tan Leilei si Yang Yang Hua wang Hongming wang Institute for Advanced Study and School of Chemistry and Chemical Engineering Nanchang UniversityNanchang330031China State Key Laboratory of Molecular Reaction Dynamics and Dynamics Research Center for Energy and Environmental Materials Dalian Institute of Chemical PhysicsChinese Academy of SciencesDalian116023China The Second Affiliated Hospital of Nanchang University Nanchang330031China

Recent research on photothermal therapy(PTT) has sparked significant interest in the development of new organic photothermal agents(PTAs),ranging from single-molecule to aggregated ***,controlling aggregation pathways for PTAs with ultrahigh photothermal conversion efficiency(PCE) remains a major ***,a two-pronged approach utilizing “Haggregation” and “intramolecular motion” was employed to enhance the PCE of an acceptor-substituted squaraine dye(NSQs).The C2vmolecular symmetry of the NSQs,which possess a ground state dipole moment(μg),promotes H-dimeric aggregates through dipole-dipole *** triphenylethylene or diphenylamine groups were added to this H-dimeric *** was done to enhance intramolecular motions for heat generation and also to extend conjugation,which redshifted the optical absorption and balanced the blue-shift induced by *** this technique,an organic PTA with NIR-II absorption was developed,and its nanoparticle achieved a remarkable PCE of 86.3% under 1,064 nm laser *** transient absorption spectroscopy and quantum mechanical calculations demonstrated the accelerated internal conversion process in NIR-II PTAs for rapid heat *** NSQs nanoparticles exhibit superior photothermal therapeutic properties for in vivo photoacoustic imaging-guided PTT,demonstrating the potential of bottom-up design to enable synergistic engineering strategies towards efficient phototheranostic agents.

关键词： squaraine dyes second near-infrared window H-aggregation intramolecular motion photothermal therapy

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Carbon dots-derived three-dimensional-ordered macroporous host with high penetrability and catalytic activity for LSBs under lean electrolyte

引用

Rare Metals 2024年第6期43卷 2560-2573页

作者： Jiao-Zi Duan Hua-Yu Pei quan Yang Xue Li Xin Ba Xue Yong Jun-Ling Guo si-Yu Lu Green Catalysis Center College of ChemistryZhengzhou UniversityZhengzhou 450001China Country State Center for International Cooperation On Designer Low-Carbon&Environmental Materials School of Materials Science and EngineeringZhengzhou UniversityZhengzhou 450001China Hubei Institute of Quality Supervision Inspection Wuhan 430061China Department of Chemistry University of SheffieldSheffeld S37HFUK

The practical energy density of lithium-sulfur batteries(LSBs)is seriously limited by the high electrolyte-to-sulfur ratios(E/S).The E/S can be reduced by employing hosts with easy-to-infiltrate structure that ensures the uniform distribution of a lean electrolyte and high catalytic activity that can suppress"shuttle effect"via accelerating the slow conversion of soluble poly sulfides to insoluble *** the easy-to-infiltrate structures,the three-dimensional-ordered macroporous(3DOM)structure is easier to scale preparation and more suitable for the existing industrial ***,it is difficult to obtain the 3DOM with(1)high penetrability due to the high viscosity of frequently-used organic polymer precursors and(2)high catalytic activity due to the low confinement effect,meaning that uniformly dispersed small-sized catalytic materials are difficult to load on ***,using carbon dots(CDs)with both organic and inorganic properties as a precursor and aggregation limiting agent,a 3DOM host with high penetrability and homodispersed Ni particles of small sizes(Ni-CDs-3DOM)was *** this host:(1)CDs precursor with suitable viscosity can improve the penetrability.(2)CDs can effectively inhibit the agglomeration of Ni particles.(3)Uniformly dispersed small-size Ni particles offer high-efficiency catalytic activity toward sulfur ***,the Ni-CDs-3DOM/sulfur cathode exhibits high sulfur utilization and stable cycling performance even under high sulfur loading(5.5 mg·cm^(-2))and low E/S(6.5μl·mg^(-1)).This work indicates the usefulness of CDs in constructing hosts for LSBs with high energy density.

关键词： Lithium-sulfur batteries Carbon dots Catalytic action Easy-to-infiltrate structure Lean electrolyte

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Conductive and stable polyphenylene/CNT composite membrane for electrically enhanced membrane fouling mitigation

引用

Frontiers of Environmental Science & Engineering 2024年第1期18卷 35-47页

作者： Huijuan Xie Haiguang Zhang Xu wang Gaoliang Wei Shuo Chen Xie quan Key Laboratory of Industrial Ecology and Environmental Engineering(Ministry of Education) School of Environmental Science and TechnologyDalian University of TechnologyDalian 116024China

Nanocarbon-based conductive membranes, especially carbon nanotube (CNT)-based membranes, have tremendous potential for wastewater treatment and water purification because of their excellent water permeability and selectivity, as well as their electrochemically enhanced performance (e.g., improved antifouling ability). However, it remains challenging to prepare CNT membranes with high structural stability and high electrical conductivity. In this study, a highly electroconductive and structurally stable polyphenylene/CNT (PP/CNT) composite membrane was prepared by electropolymerizing biphenyl on a CNT hollow fiber membrane. The PP/CNT membrane showed 3.4 and 5.0 times higher electrical conductivity than pure CNT and poly(vinyl alcohol)/CNT (PVA/CNT) membranes, respectively. The structural stability of the membrane was superior to that of the pure CNT membrane and comparable to that of the PVA/CNT membrane. The membrane fouling was significantly alleviated under an electrical assistance of −2.0 V, with a flux loss of only 11.7% after 5 h filtration of humic acid, which is significantly lower than those of PP/CNT membranes without electro-assistance (56.8%) and commercial polyvinylidene fluoride (PVDF) membranes (64.1%). Additionally, the rejection of negatively charged pollutants (humic acid and sodium alginate) was improved by the enhanced electrostatic repulsion. After four consecutive filtration-cleaning cycle tests, the flux recovery rate after backwashing reached 97.2%, which was much higher than those of electricity-free PP/CNT membranes (67.0%) and commercial PVDF membranes (61.1%). This study offers insights into the preparation of stable conductive membranes for membrane fouling control in potential water treatment applications.

关键词： Polyphenylene CNTs Membrane Electro-assistance Membrane fouling mitigation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Novel intelligent reasoning system for tool wear prediction and parameter optimization in intelligent milling

引用

Advances in Manufacturing 2024年第1期12卷 76-93页

作者： Long-Hua Xu Chuan-Zhen Huang Zhen wang Han-Lian Liu Shui-quan Huang Jun wang School of Mechanical Engineering Yanshan UniversityQinhuangdao066004HebeiPeople’s Republic of China Center for Advanced Jet Engineering Technologies(CaJET) Key Laboratory of High-efficiency and Clean Mechanical Manufacture(Ministry of Education)National Experimental Teaching Demonstration Center for Mechanical Engineering(Shandong University)School of Mechanical EngineeringShandong UniversityJinan250061People’s Republic of China Institute of Manufacturing Technology Guangdong University of TechnologyGuangzhou510006People’s Republic of China

Accurate intelligent reasoning systems are vital for intelligent *** this study,a new intelligent reasoning system was developed for milling processes to accurately predict tool wear and dynamically optimize machining *** developed system consists of a self-learning algorithm with an improved particle swarm optimization(IPSO)learning algorithm,prediction model determined by an improved case-based reasoning(ICBR)method,and optimization model containing an improved adaptive neural fuzzy inference system(IANFIS)and *** results showed that the IPSO algorithm exhibited the best global convergence *** ICBR method was observed to have a better performance in predicting tool wear than standard CBR *** IANFIS model,in combination with IPSO,enabled the optimization of multiple objectives,thus generating optimal milling *** paper offers a practical approach to developing accurate intelligent reasoning systems for sustainable and intelligent manufacturing.

关键词： Improved particle swarm optimization(IPSO)algorithm Improved case-based reasoning(ICBR)method Adaptive neural fuzzy inference system(ANFIS)model Tool wear prediction Intelligent manufacturing

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

quantification of perfluorinated compounds in atmospheric particulate shows potential connection with environmental event

引用

Journal of Environmental Sciences 2024年第2期136卷 237-247页

作者： Hua Tang Ying wang Shengling si Hongli Li David Da Yong Chen National Institute of Metrology 18 BeisanhuandongluChaoyang DistrictBeijing 100029China School of Chemistry and Materials Science Nanjing Normal UniversityNanjing 210023China si Chuan Zhong Ce Biao Wu Technology Co.Ltd. Sichuan 610052China Department of Chemistry University of British ColumbiaVancouver V6T 1Z1BCCanada

A method of quantification of perfluorinated compounds(PFCs)from atmospheric particulate matter(APM)is described.A single step pretreatment method,selective pressurized liquid extraction(SPLE),was developed to reduce the high matrix background and avoid contamination from commonly used multiple sample pretreatment *** effective sorbent was selected to purify the PFCs during SPLE,followed by liquid chromatography-tandem mass spectrometry(LC–MS/MS),for quantification of *** affecting the SPLE efficiency,including temperature,static extraction time,and number of extraction cycles used,were *** optimum conditions were found to be 120℃,10 min,and 3 cycles,***-MS/MS method was developed to obtain the optimal sensitivity specific to *** method detection limits(MDLs)were 0.006 to 0.48 ng/g for the PFCs studied and the linear response range was from 0.1 to 100 ng/*** ensure accurate values were obtained,each step of the experiment was evaluated and controlled to prevent *** optimized method was tested by performing spiking experiments in natural particulate matter matrices and good rates of recovery and reproducibility were obtained for all target ***,the method was successfully used to measure 16 PFCs in the APM samples collected in Beijing over five years from 2015 to *** is observed that some PFCs follow the trend of total PFC changes,and can be attributed to the environment influencing events and policy enforcement,while others don't seem to change as much with time of the year or from year to year.

关键词： Selective pressurized liquid extraction Liquid chromatography-mass spectrometry Perfluorinated compounds Atmospheric particulate matter Pollution control

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Unraveling the biological link between diabetes mellitus and prostate cancer:Insights and implications

引用

World Journal of Diabetes 2024年第6期15卷 1367-1373页

作者： Jian Li Zhi-Peng Li si-si Xu Wei wang Department of Interventional Oncology Municipal Hospital Affiliated to Taizhou UniversityTaizhou 318000Zhejiang ProvinceChina School of Medicine Taizhou UniversityTaizhou 318000Zhejiang ProvinceChina

This article is a comprehensive study based on research on the connection between diabetes mellitus(DM)and prostate cancer(PCa).It investigates the potential role of DM as an independent risk factor for PCa,delving into the biological links,including insulin resistance and hormonal *** paper critically analyzes previous studies that have shown varying results and introduces mendelian randomization as a method for establishing *** emphasizes the importance of early DM screening and lifestyle modifications in preventing PCa,and proposes future research directions for further understanding the DM-PCa relationship.

关键词： Biological mechanisms Diabetes mellitus Mendelian randomization Prevention prostatic cancer Treatment

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Automated identification of steel weld defects,a convolutional neural network improved machine learning approach

引用

Frontiers of Structural and Civil Engineering 2024年第2期18卷 294-308页

作者： Zhan SHU Ao WU Yuning si Hanlin DONG Dejiang wang Yifan LI School of Mechanics and Engineering Science Shanghai UniversityShanghai 200444China School of Civil Engineering Shanghai Normal UniversityShanghai 201418China Shanghai PinlanData Technology Co. Ltd.Shanghai 200072China

This paper proposes a machine-learning-based methodology to automatically classify different types of steel weld defects,including lack of the fusion,porosity,slag inclusion,and the qualified(no defects)*** methodology solves the shortcomings of existing detection methods,such as expensive equipment,complicated operation and inability to detect internal *** study first collected percussed data from welded steel members with or without weld ***,three methods,the Mel frequency cepstral coefficients,short-time Fourier transform(STFT),and continuous wavelet transform were implemented and compared to explore the most appropriate features for classification of weld *** and convolutional neural network-enhanced algorithms were used to classify,the extracted ***,experiments were designed and performed to validate the proposed *** showed that STFT achieved higher accuracies(up to 96.63%on average)in the weld status *** convolutional neural network-enhanced support vector machine(SVM)outperformed six other algorithms with an average accuracy of 95.8%.In addition,random forest and SVM were efficient approaches with a balanced trade-off between the accuracies and the computational efforts.

关键词： steel weld machine learning convolutional neural network weld defect detection classification task percussion

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Grapevine-like high entropy oxide composites boost high-performance lithium sulfur batteries as bifunctional interlayers

引用

Green Energy & Environment 2024年第3期9卷 565-572页

作者： Huarong Fan Yubing si Yiming Zhang Fulong Zhu Xin wang Yongzhu Fu College of Chemistry and Center of Green Catalysis Zhengzhou UniversityZhengzhou450001China School of Materials and Energy University of Electronic Science and Technology of ChinaChengdu611731China

Lithium-sulfur batteries(LSBs)with high energy densities have been demonstrated the potential for energy-intensive demand ***,their commercial applicability is hampered by hysteretic electrode reaction kinetics and the shuttle effect of lithium polysulfides(LiPSs).In this work,an interlayer consisting of high-entropy metal oxide(Cu_(0.7)Fe_(0.6)Mn_(0.4)Ni_(0.6)Sn_(0.5))O_(4) grown on carbon nanofibers(HEO/CNFs)is designed for *** CNFs with highly porous networks provide transport pathways for Li^(+) and e^(-),as well as a physical sieve effect to limit LiPSs *** particular,the grapevine-like HEO nanoparticles generate metal-sulfur bonds with LiPSs,efficiently anchoring active *** unique structure and function of the interlayer enable the LSBs with superior electrochemical performance,i.e.,the high specific capacity of 1381 mAh g^(-1) at 0.1 C and 561 mAh g^(-1) at 6 *** work presents a facile strategy for exploiting high-performance LSBs.

关键词： Electrospun carbon nanofibers Grapevine-like morphology Hierarchical physical sieve effect High-entropy induced chemisorption Lithium-sulfur battery

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Design and modification of metal sulfide-based catalysts for lithiumsulfur batteries

引用

Particuology 2024年第3期86卷 86-100页

作者： Yufei Zhao Chuannan Geng Li wang Haotian Yang Wei Lv quan-Hong Yang Nanoyang Group State Key Laboratory of Chemical EngineeringSchool of Chemical Engineering and TechnologyNational Industry-Education Integration Platform of Energy Storageand Collaborative Innovation Center of Chemical Science and Engineering(Tianjin)Tianjin UniversityTianjin300072China Shenzhen Geim Graphene Center Engineering Laboratory for Functionalized Carbon MaterialsTsinghua Shenzhen International Graduate SchoolTsinghua UniversityShenzhen518055China Haihe Laboratory of Sustainable Chemical Transformations Tianjin300192China Joint School of National University of singapore and Tianjin University International Campus of Tianjin UniversityFuzhou350207China

Metal sulfide(MS)have good conductivity,strong adsorption ability,and excellent catalytic activity for the conversion of sulfur species,and thus,show great promise as the catalysts in LieS ***,the relationship between their properties and electrochemical performance is still ***,further in-depth discussions are required to improve their design in Li-S *** review systematically summarizes the basic structural and electrochemical properties of MSs and highlights the advantages that guarantee them as high-performance catalysts in Li-S ***,various modification strategies for MSs to enhance the catalytic activity,efficiency,and stability are also *** last,future opportunities for MS catalysts in Li-S batteries are proposed.

关键词： Lithium-sulfur battery Metal sulfide Catalysis

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Thermal fatigue and wear of compacted graphite iron brake discs with various thermomechanical properties

引用

China Foundry 2024年第3期21卷 248-256页

作者： Gui-quan wang Zhuo Xu Zhong-li Liu Xiang Chen Yan-xiang Li School of Nuclear Equipment and Nuclear Engineering Yantai UniversityYantai 264005ShandongChina School of Materials Science and Engineering Tsinghua UniversityBeijing 100084China Key Laboratory for Advanced Materials Processing Technology Ministry of EducationBeijing 100084China

The increase in payload capacity of trucks has heightened the demand for cost-effective yet high performance brake *** this work,the thermal fatigue and wear of compacted graphite iron brake discs were investigated,aiming to provide an experimental foundation for achieving a balance between their thermal and mechanical *** graphite iron brake discs with different tensile strengths,macrohardnesses,specific heat capacities and thermal diffusion coefficients were produced by changing the proportion and strength of *** peak temperature,pressure load and friction coefficient of compacted graphite iron brake discs were analyzed through inertia friction *** morphology of thermal cracks and 3D profiles of the worn surfaces were also *** is found that the thermal fatigue of compacted graphite iron discs is determined by their thermal properties.A compacted graphite iron with the highest specific heat capacity and thermal diffusion coefficient exhibits optimal thermal fatigue *** of the matrix at low temperatures significantly weakens the function of alloy strengthening in hindering the propagation of thermal *** the reduced hardness,increasing the ferrite proportion can mitigate wear loss resulting from low disc temperatures and the absence of abrasive wear.

关键词： compacted graphite iron brake disc thermomechanical properties thermal fatigue wear

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：