检索结果-南通市图书馆

新型炭材料（中英文） 2024年第4期39卷 633-644页

作者： ZHANG Jia-ping SU Xiao-xuan LI Xin-gang wang run-ning FU Qian-gang Shaanxi Key Laboratory of Fiber Reinforced Light Composite Materials Northwestern Polytechnical UniversityXi’an 710072China

The development of advanced aircraft relies on high performance thermal-structural materials,and carbon/carbon com-posites(C/C)composited with ultrahigh-temperature ceramics are ideal ***,the traditional routes of compositing are either inefficient and expensive or lead to a non-uniform distribution of ceramics in the *** with the traditional C/C-ZrC-SiC composites prepared by the reactive melt infiltration of ZrSi_(2),C/C-ZrB_(2)-ZrC-SiC composites prepared by the vacuum infiltration of ZrB_(2) combined with reactive melt infiltration have the higher content and more uniform distribution of the introduced ceramic *** mass and linear ablation rates of the C/C-ZrB_(2)-ZrC-SiC composites were respectively 68.9%and 29.7%lower than those of C/C-ZrC-SiC composites prepared by reactive melt *** ablation performance was improved because the volatilization of B_(2)O_(3),removes some of the heat,and the more uniformly distributed ZrO_(2),that helps produce a ZrO2-SiO2 continu-ous protective layer,hinders oxygen infiltration and decreases ablation.

关键词： C/C composites ZrB_(2)-ZrC-SiC Vacuum filtration Reactive melt infiltration Ablation.

PPB structure elimination,DRX nucleation mechanisms and grain growth behavior of the3rd-generation PM superalloy for manufacturing aviation components

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Aeronautics 2024年第1期37卷 325-344页

作者： Baoyun ZHANG Yongquan ning Zhaotian wang Qiaomu LIU School of Materials Science and Engineering Northwestern Polytechnical UniversityXi’an 710072China AECC Sichuan Gas Turbine Establishment Chengdu 610500China

Previous Particle Boundary(PPB),as the detrimental structure in Powder Metallurgy(PM)components,should be eliminated by subsequent hot process to improve the mechanical *** objective is to investigate the Dynamic Recrystallization(DRX)nucleation mechanisms and grain growth behavior of the 3rd-generation PM superalloy with PPB *** observation reveals that PPB decorated with(Ti,Ta,Nb)C carbides belongs to the discontinuous chain-like *** elimination of PPB networks can be achieved effectively via hot deformation due to the occurrence of *** different DRX nucleation mechanisms were proposed and discussed in detail according to the special microstructure characteristics of the PM ***,local lattice rotations can be detected in the vicinity of(Ti,Ta,Nb)C carbides during hot deformation and thus PPB structure serves as the preferential nucleation sites for DRX grains via Particle-Stimulated Nucleation(PSN).Then,Discontinuous-DRX(DDRX)characterized by grain boundary bulging dominates the microstructure refinement and Continuous-DRX(CDRX)operated by subgrain rotation can be regarded as an important assistant *** last,the initial Σ3 boundaries would lose their twin characteristics owing to the crystal rotation and then transform into the general High Angle Grain Boundaries(HAGBs).The distorted twins provide additional DRX nucleation sites,viz.,twin-assisted *** attention was focused on the grain growth behavior of the PM superalloy in subsequent annealing *** recrystallization temperature was determined to be about 1110.C and 1140.C can be considered as the critical temperature for grain *** findings would provide theoretical support for microstructure refinement of the 3rd-generation PM superalloy,which is of pivotal significance for improving the mechanical properties of aviation components.

关键词： PM superalloy Previous Particle Boundary(PPB) DRX nucleation Grain growth Microstructure refinement

Enhancement of comprehensive properties of Nb–Si based in-situ composites by Ho rare earth doping

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第9期43卷 4508-4520页

作者： Wei Wei Qi wang Rui-run Chen Chao-Wen Zheng Yan-Qing Su National Key Laboratory for Precision Hot Processing of Metals School of Materials Science and EngineeringHarbin Institute of Technology

This study examines the microstructure,mechanical properties （with a focus on room-temperature toughness）, and oxidation resistance of Ho-doped NbDSi based in-situ composites. The base alloy consists of the coarse primary Nb5Si3phase and the Nb5Si3+Nbss （Nb solid solution） eutectic cells. Ho doping influences the solidification path. When the Ho doping is higher than0.2 at%, the alloys transform into eutectic alloys. Ho can be solid-solved in trace amounts in the Nbss phase. However, most of Ho forms a stable Ho oxide phase, which alleviates oxygen contamination problem to some ***, the interface separation between Ho oxide and other phases reduces the plastic deformation ***, with 0.4 at%Ho doping, the KQvalue is18.03 MPa·m1/2, which is 31.1%higher than that of the base alloy. The strength of the Ho-doped alloys does not deteriorate with an increase in toughness. However, the large network-like Ho2O3in the 0.8Ho alloy causes a decrease in toughness and strength. In addition, the Ho oxide phase effectively blocks the inward oxygen *** 0.8 at%Ho doping, the oxidation mass gain per unit area is 10.16 mg·cm2, which is 39.7%lower than that of the base alloy.

关键词： Ho Microstructure Nb–Si based composites Properties Rare earth elements

Unveiling evapotranspiration patterns and energy balance in a subalpine forest of the Qinghai-Tibet Plateau:observations and analysis from an eddy covariance system

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Forestry Research 2024年第3期35卷 175-188页

作者： Niu Zhu Jinniu wang Dongliang Luo Xufeng wang Cheng Shen ning Wu ning Zhang Binghui Tian Aihong Gai Chengdu Institute of Biology Chinese Academy of SciencesChengdu 610041People's Republic of China College of Resources and Environmental Sciences Gansu Agricultural UniversityLanzhou 730070People's Republic of China Mangkang Ecological Monitoring Station Tibet Ecological Security Barrier Ecological Monitoring NetworkQamdo 854500People's Republic of China Northwest Institute of Eco Environmental Resources Chinese Academy of SciencesLanzhou 730000People's Republic of China

Evapotranspiration is an important parameter used to characterize the water cycle of *** under-stand the properties of the evapotranspiration and energy balance of a subalpine forest in the southeastern Qinghai-Tibet Plateau,an open-path eddy covariance system was set up to monitor the forest from November 2020 to October 2021 in a core area of the Three Parallel Rivers in the Qing-hai-Tibet *** results show that the evapotranspira-tion peaked daily,the maximum occurring between 11:00 and 15:*** factors had significant effects on evapotranspiration,among them,net radiation the greatest(R^(2)=0.487),and relative humidity the least(R^(2)=0.001).The energy flux varied considerably in different seasons and sensible heat flux accounted for the main part of turbulent *** energy balance ratio in the dormant season was less than that in the growing season,and there is an energy imbalance at the site on an annual time scale.

关键词： Evapotranspiration Energy balance Subalpine forest Three Parallel Rivers region Southeast Qinghai-Tibet Plateau

Novel self-assembled porous yolk-shell NiO nanospheres with excellent electrochromic performance for smart windows

在线全文

学校读者我要写书评

暂无评论

Particuology 2024年第1期84卷 72-80页

作者： Baoshun wang Ya Huang Siming Zhao run Li Di Gao Hairong Jiang Rufan Zhang Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology Department of Chemical EngineeringTsinghua UniversityBeijing100084China

With the rapid development of optoelectronics,electrochromic(EC)materials(ECMs)with the advan-tages of low power consumption,easy viewing,high contrast ratio,etc have attached more and more attention from the fields of smart windows,electronic billboards,emerging wearable and portable electronics,and other next-generation *** oxide(NiO)is a promising candidate for high-performance ECMs because of its neutral-colored states and low ***,NiO-based ECMs still face the problem of slow switching speed due to their low electrical conductivity and small lattice ***-organic frameworks(MOFs)are promising candidates to fabricate hollow and porous transition metal oxides(TMOs)with high ion transport efficiency,excellent specific capacitance,and electrochemical *** this work,porous yolk-shell NiO nanospheres(PYS-NiO NSs)were syn-thesized via a solvothermal and subsequent calcination process of Ni-MOF,which exhibited outstanding EC *** the large specific surface areas and hollow porous nanostructures were conducive to ionic transport,PYS-NiO NSs exhibited a fast coloring/bleaching speed(3.6/3.9 s per one coloring/bleaching cycle)and excellent cycling stability(82%of capacity retention after 3000 cycles).These superior EC properties indicated that the PYS-NiO NSs was a promising candidate for high-performance EC *** work provides a new and feasible strategy for the efficient preparation of TMOs ECMs with good EC performance,especially fast switching speed.

关键词： Electrochromic Nickel oxide Metal-organic frameworks Hollow structure Smart windows

Fatigue Crack Initiation and Propagation Dominated by Crystallographic Factors in TiB/near α-Ti Composite

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第5期37卷 763-776页

作者： Fanchao Meng Rui Zhang Shuai wang Fengbo Sun run Chen Lujun Huang Lin Geng School of Materials Science and Engineering Harbin Institute of TechnologyHarbin 150001China Waikato Centre for Advanced Materials and Manufacturing School of EngineeringUniversity of WaikatoHamilton 3240New Zealand State Key Laboratory of Advanced Welding and Joining Harbin Institute of TechnologyHarbin 150001China

Discontinuously reinforced titanium matrix composites(DRTMCs)with a network structure have been extensively researched due to their superior combination of strength and ***,their fatigue performance has remained *** order to elucidate the fatigue behavior of DRTMCs,a tension-tension fatigue test was performed on a TiB/nearα-Ti composite with network *** results showed that the variability of fatigue lifetime increased as the stress level *** analysis indicated that fatigue crack initiation was associated with facet formation,while the subsequent propagation was hindered by the network structure comprising TiB whiskers and *** characterization further revealed that facets formed due to a combination of shear and normal *** reduction in fatigue lifetime was attributed to an increase in the effective slip length,which was influenced by the orientation of grains near the crack-initiation sites toward basal slip in the life-limiting *** in situ observation suggested that the crack initiation was facilitated by both basal and prismatic slip ofα-Ti as well as fracture of *** propagation was found to be associated with basal and prismatic slip systems with high Schmid factors,regardless of whether the crack was intergranular or intragranular.

关键词： Titanium matrix composite TiBw Fatigue lifetime variability Crack initiation Crack propagation

STDNet: A Spatio-Temporal Decomposition Neural Network for Multivariate Time Series Forecasting

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Tsinghua Science and Technology 2024年第4期29卷 1232-1247页

作者： Zhuolun Jiang Zefei ning Hao Miao Li wang College of Computer Science and Technology(College of Data Science) Taiyuan University of TechnologyJinzhong 030600China

Long-term multivariate time series forecasting is an important task in engineering applications. It helps grasp the future development trend of data in real-time, which is of great significance for a wide variety of fields. Due to the non-linear and unstable characteristics of multivariate time series, the existing methods encounter difficulties in analyzing complex high-dimensional data and capturing latent relationships between multivariates in time series, thus affecting the performance of long-term prediction. In this paper, we propose a novel time series forecasting model based on multilayer perceptron that combines spatio-temporal decomposition and doubly residual stacking, namely Spatio-Temporal Decomposition Neural Network (STDNet). We decompose the originally complex and unstable time series into two parts, temporal term and spatial term. We design temporal module based on auto-correlation mechanism to discover temporal dependencies at the sub-series level, and spatial module based on convolutional neural network and self-attention mechanism to integrate multivariate information from two dimensions, global and local, respectively. Then we integrate the results obtained from the different modules to get the final forecast. Extensive experiments on four real-world datasets show that STDNet significantly outperforms other state-of-the-art methods, which provides an effective solution for long-term time series forecasting.

关键词： time series forecasting multivariate time series spatio-temporal decomposition

Static recrystallization behaviors and mechanisms of 7Mo super-austenitic stainless steel with undissolved sigma precipitates during double-stage hot deformation

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第2期31卷 475-487页

作者： Shi-guang Xu Jin-shan He run-ze Zhang Fu-cheng Zhang Xi-tao wang Collaborative Innovation Center of Steel Technology University of Science and Technology BeijingBeijing100083China State Key Laboratory of Metastable Materials Science and Technology Yanshan UniversityQinhuangdao066004HebeiChina Shandong Provincial Key Laboratory for High Strength Lightweight Metallic Materials Advanced Materials InstituteQilu University of Technology(Shandong Academy of Science)Jinan250353ShandongChina

Static recrystallization(SRX)behaviors and corresponding recrystallization mechanisms of 7Mo super-austenitic stainless steel were studied under different deformation *** order of influence of deformation parameters on static recrystallization behaviors,from high to low,is followed by temperature,first-stage strain and strain ***,the effect of holding time on static recrystallization behaviors is significantly controlled by *** addition,with the increase in temperature from 1000 to 1200°C,the static recrystallization mechanism evolves from discontinuous static recrystallization and continuous static recrystallization(cSRX)to metadynamic recrystallization and cSRX,and finally to *** cSRX exists at all *** is because high stacking fault energy(56 mJ m−2)promotes the movement of dislocations,making the deformation mechanism of this steel is dominated by planar slip of *** undissolved sigma precipitates promote static recrystallization through particle-stimulated ***,small strain-induced precipitates at grain boundaries hinder the nucleation of conventional SRX and the growth of recrystallized grains,while the hindering effect decreases with the increase in temperature.

关键词： 7Mo super-austenitic stainless steel Double-stage hot deformation Conventional static recrystallization Metadynamic recrystallization Strain-induced precipitation

Exploration on electrical resistance tomography in characterizing the slurry spatial distribution in cemented granular materials

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2024年第3期18卷 365-379页

作者： Bohao wang Wei wang Feng JIN Handong TAN ning LIU Duruo HUANG State Key Laboratory of Hydroscience and Engineering Tsinghua UniversityBeijing 100084China Institute of Science and Technology China Three Gorges CorporationBeijing 100038China School of Geophysics and Information Technology China University of GeosciencesBeijing 100083China

This study investigated the application of electrical resistance tomography(ERT)in characterizing the slurry spatial distribution in cemented granular materials(CGMs).For CGM formed by self-flow grouting,the voids in the accumulation are only partially filled and the bond strength is often limited,which results in difficulty in obtaining in situ samples for quality ***,it is usually infeasible to evaluate the grouting effect or monitor the slurry spatial distribution by a mechanical *** this research,the process of grouting cement paste into high alumina ceramic beads(HACB)accumulation is reliably monitored with *** shows that ERT results can be used to calculate the cement paste volume in the HACB accumulation,based on calibrating the saturation exponent n in Archie’s *** results support the feasibility of ERT as an imaging tool in CGM characterization and may provide guidance for engineering applications in the future.

关键词： electrical resistance tomography cemented granular material grouting spatial distribution Archie’s law

Lamellar water induced quantized interlayer spacing of nanochannels walls

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Green Energy & Environment 2024年第2期9卷 356-365页

作者： Yue Zhang Chenlu wang Chunlei wang Yingyan Zhang Junhua Zhao ning Wei Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment and Technology Jiangnan UniversityWuxi214122China Key Laboratory of Agricultural Soil and Water Engineering in Arid and Semiarid Areas Ministry of EducationNorthwest A&F UniversityYangling712100China Zhangjiang Lab Interdisplinary Research CenterShanghai Advanced Research InstituteChinese Academy of SciencesShanghai201210China Key Laboratory of Interfacial Physics and Technology Shanghai Institute of Applied PhysicsChinese Academy of SciencesShanghai201800China Mechanical&Automotive Engineering School of EngineeringRMIT UniversityBundooraMelbourneVICVIC 3083Australia

The nanoscale confinement is of great important for the industrial applications of molecular sieve,desalination,and also essential in bio-logical transport *** efforts have been devoted to the influence of restricted spaces on the properties of confined ***,the situation of channel-wall is crucial but attracts less attention and remains *** fundamentally understand the mechanism of channel-walls in nanoconfinement,we investigated the interaction between the counter-force of the liquid and interlamellar spacing of nanochannel walls by considering the effect of both spatial confinement and surface *** results reveal that the nanochannel stables at only a few discrete spacing states when its confinement is within 1.4 *** quantized interlayer spacing is attributed to water molecules becoming laminated structures,and the stable states are corresponding to the monolayer,bilayer and trilayer water configurations,*** results can potentially help to understand the characterized interlayers spacing of graphene oxide membrane in *** findings are hold great promise in design of ion filtration membrane and artificial water/ion channels.

关键词： Nanoconfinement Quantized spacing Lamellar water layer MD simulations Entropy force