检索结果-南通市图书馆

New steelmaking process based on clean deoxidation technology

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第6期31卷 1249-1262页

作者： Zhongliang wang Yanping bao State Key Laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China

After the converter steelmaking process,a considerable number of ferroalloys are needed to remove dissolved oxygen from the molten steel,but it also forms a lot of oxide inclusions that cannot be completely *** the same time,it increases the carbon emis-sions in the steel production *** years of research,our team have developed a series of clean deoxidation technologies,includ-ing carbon deoxidation,hydrogen deoxidation,and waste plastic deoxidation of molten steel to address the aforementioned *** this study,thermodynamic calculations and laboratory experiments were employed to verify that carbon and hydrogen can reduce the total oxygen content in the molten steel melt to below 5×10^(-6) and 10×10^(-6),*** analysis of the deoxidation mechanisms and ef-fects of polyethylene and polypropylene was also *** addition,the applications of carbon deoxidation technology in different steels with the hot-state experiment and industrial production were discussed *** carbon deoxidation experimental results of different steels were as follows:(1)the oxygen content of bearing steel was effectively controlled at 6.3×10^(-6) and the inclusion number density was lowered by 74.73%compared to aluminum deoxidized bearing steel;(2)the oxygen content in gear steel was reduced to 7.7×10^(-6) and a 54.49%reduction of inclusion number density was achieved with almost no inclusions larger than 5μm from the average level of industry gear steels;(3)a total oxygen content of M2 high-speed steel was as low as 3.7×10^(-6).In industrial production practice,car-bon deoxidation technique was applied in the final deoxidation stage for non-aluminum deoxidized bearing steel,and it yielded excellent results that the oxygen content was reduced to below 8×10^(-6) and the oxide inclusions in the steel mainly consist of silicates,along with small amounts of spinel and calcium aluminate.

关键词： clean deoxidation carbon deoxidation hydrogen deoxidation waste plastics deoxidation

维普期刊数据库

Development and prospects of molten steel deoxidation in steelmaking process

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2024年第1期31卷 18-32页

作者： Zhongliang wang Yanping bao State Key Laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China

In the long traditional process of steelmaking,excess oxygen is blown into the converter,and alloying elements are used for *** inevitably results in excessive deoxidation of products remaining within the steel liquid,affecting the cleanliness of the *** the increasing requirements for steel performance,reducing the oxygen content in the steel liquid and ensuring its high cleanliness is *** more than a hundred years of development,the total oxygen content in steel has been reduced from approximately 100×10^(-6)to approximately 10×10^(-6),and it can be controlled below 5×10^(-6)in some steel grades.A relatively stable and mature deoxidation technology has been formed,but further reducing the oxygen content in steel is no longer significant for improving steel *** research team developed a deoxidation technology for bearing steel by optimizing the entire conventional *** technology combines silicon–manganese predeoxidation,ladle furnace diffusion deoxidation,and vacuum final *** successfully conducted industrial experiments and produced interstitial-free steel with natural decarbonization ***-aluminum deoxidation was found to control the oxygen content in bearing steel to between 4×10^(-6) and 8×10^(-6),altering the type of inclusions,eliminating large particle Ds-type inclusions,improving the flowability of the steel liquid,and deriving a higher fatigue *** natural decarbonization predeoxidation of interstitial-free steel reduced aluminum consumption and production costs and significantly improved the quality of cast billets.

关键词： steel deoxidation deoxidizer metallurgical equipment bearing steel IF steel

维普期刊数据库

Enhanced preparation of dendritic metallic vanadium in recyclable NaCl-KCl-VCl_(2) molten salt by V_(2)CO electrolysis

在线全文

学校读者我要写书评

暂无评论

Rare Metals 2024年第8期43卷 3961-3973页

作者： Jia-Liang An Ming-Yong wang Yong-Zheng Jia jin-Tao Zhang bao-Yan Feng Shu-Qiang Jiao State Key Laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China College of Material Science and Engineering Hebei Province Laboratory of Inorganic Nonmetallic MaterialsNorth China University of Science and TechnologyTangshan 063210China

A promising method for the preparation of pure metallic vanadium via V_(2)CO anode electrolysis was proposed and *** simple and controllable synthesis of a molten chloride salt containing VCl_(2) by an insitu reaction between VCl_(3) and metallic vanadium was verified through thermodynamic analysis and ***-KCl-VCl_(2) molten salt exhibited excellent recycling performance and could be repetitively used to prepare metallic vanadium by V_(2)CO *** V^(2+) ions remained in the molten salt after *** electrolysis conditions,such as the cathode diameter,current density,V^(2+) ion concentration,and temperature,were optimised to maximise the current *** was also simulated to reveal the regulatory *** highest current efficiency was 85%.The purity of metallic vanadium was up to 99.8%.In this study,an easy and efficient preparation of pure metallic vanadium was achieved.

关键词： V_(2)CO Metallic vanadium Current efficiency Molten salt electrolysis

维普期刊数据库

An isolated symmetrical 2T2R cell enabling high precision and high density for RRAM-based in-memory computing

在线全文

学校读者我要写书评

暂无评论

Science China(Information Sciences) 2024年第5期67卷 287-294页

作者： Yaotian LING Zongwei wang Yuhang YANG Lin bao Shengyu bao Qishen wang Yimao CAI Ru HUANG School of Integrated Circuits Beijing Advanced Innovation Center for Integrated Circuits Peking University State Key Laboratory of Information Photonics and Optical Communications Beijing University of Posts and Telecommunications

In-memory computing(IMC), leveraging emerging memories, holds significant promise in overcoming memory limitations and improving energy efficiency. However, the prevailing IMC array structure based on serially connected transistors and memory cells(1T1R/2T2R), along with the signed weight mapping scheme, can lead to asymmetrical weight sensing issues(AWS) due to electrical asymmetry within the1T1R/2T2R structure, particularly in highly scaled cells where the transistor's resistance becomes significant. In this paper, we propose and fabricate an electrically symmetric memory cell based on a physically isolated 2T2R structure for IMC. This design aims to enhance the precision and density of RRAM-based IMC arrays. The 2T2R cells are manufactured using the back-end-of-line(BEOL) process of a commercial40 nm technology platform. The feasibility of this design is verified through measured and simulated results,showcasing its capability to address the issue of AWS. Compared to conventional 2T2R cells, this design achieves a considerably smaller transistor footprint without compromising accuracy, while also improving integration density by 42.2%. These innovative memory cell advancements have the potential to further advance high-energy-efficient IMC technology.

关键词： RRAM 2T2R multi-level storage weight asymmetry in-memory computing

Surface quality investigation in high-speed dry milling of Ti-6Al-4V by using 2D ultrasonic-vibration-assisted milling platform

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Advances in Manufacturing 2024年第2期12卷 349-364页

作者： jin Zhang Li Ling Qian-Yue wang Xue-Feng Huang Xin-Zhen Kang Gui-bao Tao Hua-Jun Cao College of Mechanical and Vehicle Engineering Chongqing UniversityChongqing400044People’s Republic of China State Key Laboratory of Mechanical Transmissions Chongqing UniversityChongqing400044People’s Republic of China Aerospace Research Institute of Materials and Processing Technology Beijing100076People’s Republic of China

Ultrasonic-vibration-assisted milling(UVAM)is an advanced method for the efficient and precise machining of difficult-to-machine materials in modern ***,the milling efficiency is limited because the ultrasonic vibration toolholder ER16 collet has a critical cutting ***,a 2D UVAM platform is built to ensure precision machining efficiency and improve the surface quality without changing the milling *** evaluate this 2D UVAM platform,ultrasonic-vibration-assisted high-speed dry milling(UVAHSDM)is performed to process a titanium alloy(Ti-6Al-4V)on the platform,and the milling temperature,surface roughness,and residual stresses are selected as the important indicators for performance *** results show that the intermittent cutting mechanism of UVAHSDM combined with the specific spindle speed,feed speed,and vibration amplitude can reduce the milling temperature and improve the texture of the machined *** with conventional milling,UVAHSDM reduces surface roughness and peak-groove surface profile values and extends the range of residual surface compressive stresses from−413.96 MPa to−600.18 *** excellent processing performance demonstrates the feasibility and validity of applying this 2D UVAM platform for investigating surface quality achieved under UVAHSDM.

关键词： 2D ultrasonic-vibration-assisted milling(UVAM)platform Ultrasonic-vibration-assisted high-speed dry milling(UVAHSDM) Milling temperature Surface roughness Residual stress

A Bregman-Style Improved ADMM and its Linearized Version in the Nonconvex Setting:Convergence and Rate Analyses

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of the Operations Research Society of China 2024年第2期12卷 298-340页

作者： Peng-Jie Liu jin-bao Jian Hu Shao Xiao-Quan wang Jia-Wei Xu Xiao-Yu Wu School of Mathematics Jiangsu Center for Applied MathematicsChina University of Mining and TechnologyXuzhou 221116JiangsuChina School of Mathematics and Physics Center for Applied Mathematics of GuangxiGuangxi Minzu UniversityNanning 530006GuangxiChina Department of Civil and Environmental Engineering The Hong Kong Polytechnic UniversityHong KongChina School of Mathematics and Computational Science Xiangtan UniversityXiangtan 411105HunanChina

This work explores a family of two-block nonconvex optimization problems subject to linear *** first introduce a simple but universal Bregman-style improved alternating direction method of multipliers(ADMM)based on the iteration framework of ADMM and the Bregman ***,we utilize the smooth performance of one of the components to develop a linearized version of *** to the traditional ADMM,both proposed methods integrate a convex combination strategy into the multiplier update *** each proposed method,we demonstrate the convergence of the entire iteration sequence to a unique critical point of the augmented Lagrangian function utilizing the powerful Kurdyka–Łojasiewicz property,and we also derive convergence rates for both the sequence of merit function values and the iteration ***,some numerical results show that the proposed methods are effective and encouraging for the Lasso model.

关键词： Nonconvex optimization Alternating direction method of multipliers:Kurdyka-Lojasiewicz property.Convergence rate

Multi-level coarse-grained discrete element method modeling of cylinder particle flow in a rotating drum

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第5期88卷 218-238页

作者： Lei Xu Xiukai Wu Shuai wang Shiyi bao Institute of Process Equipment and Control Engineering Zhejiang University of TechnologyHangzhou 310023China Engineering Research Center of Process Equipment and Remanufacturing Ministry of EducationZhejiang University of TechnologyHangzhou 310023China College of Mechanical Engineering Zhejiang University of TechnologyHangzhou 310023China State Key Laboratory of Clean Energy Utilization Zhejiang UniversityHangzhou 310027China

The coarse-grained discrete element method(DEM)is probably a feasible option for simulating an actual drum-type biomass boiler,which contains over 10 million cylinder particles.A multi-level study was conducted based on particle and coarse-grained level data to evaluate the adequacy of the coarse-grained approach in terms of geometrical characteristics,kinematic features,and dynamic *** scaling laws for contact parameters were used and compared during the *** results show that the coarse-grained approach can accurately predict the positions of the free surface and active-passive interface,the mixing index,and the orientation *** in the velocity fields may occur due to the worse flowability of coarse-grained particles near the free *** efficiency is significantly improved by the coarse-grained model compared with the corresponding original case(the same DEM code without a coarse-grained model was used for the original simulations).

关键词： Coarse-grained method Discrete element method(DEM) Cylinder particle Rotating drum Granular flow

Stereospecific Assembly of Trisubstituted Alkenes via Photoinduced Nitrogen-Centered Radical-Triggered C—C Bond Cleavage/Functionalization of Oxime Esters

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Chemistry 2024年第12期42卷 1399-1406页

作者： Yu bao Zhi-Jie Song jin-Long Dai Shenghu Yan Yue Zhang Jia-Yin wang Guigen Li School of Pharmacy Changzhou UniversityChangzhouJiangsu 213164China Department of Chemistry and Biochemistry Texas Tech University79409USA

Comprehensive Summary A general and convenient photoredox-catalyzed acylation and alkylcyanation of MBH acetates has been established,enabling the assembly of the C(sp2)–C(sp3)bond by a nitrogen-centered radical strategy for the synthesis of trisubstituted alkenes in moderate to excellent chemical yields(48 examples in total).The reaction of MBH acetates with acyl(indanone)oxime esters afforded trisubstituted alkenes containing 1,4-dicarbonyl ***,the use of Eosin Y as a photocatalyst in the catalytic system resulted in the formation of distal cyano group-anchored trisubstituted alkenes via deconstructive functionalization of cycloketone oxime ***,these resulting 1,4-dicarbonyl compounds could be applied to late-stage transformations,providing important methods for the synthesis of dihydropyridazin-3(2H)-one.

关键词： Photocatalysis Radical reactions MBH acetates Oxime esters Stereoselectivity Acylation Alkylation Green chemistry

Ethical Decision-Making Framework Based on Incremental ILP Considering Conflicts

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第3期78卷 3619-3643页

作者： Xuemin wang Qiaochen Li Xuguang bao Guangxi Key Laboratory of Trusted Software Guilin University of Electronic TechnologyGuilin541004China

Humans are experiencing the inclusion of artificial agents in their lives,such as unmanned vehicles,service robots,voice assistants,and intelligent medical *** the artificial agents cannot align with social values or make ethical decisions,they may not meet the expectations of ***,an ethical decision-making framework is constructed by rule-based or statistical *** this paper,we propose an ethical decision-making framework based on incremental ILP(Inductive Logic Programming),which can overcome the brittleness of rule-based approaches and little interpretability of statistical *** the current incremental ILP makes it difficult to solve conflicts,we propose a novel ethical decision-making framework considering conflicts in this paper,which adopts our proposed incremental ILP *** framework consists of two processes:the learning process and the deduction *** first process records bottom clauses with their score functions and learns rules guided by the entailment and the score *** second process obtains an ethical decision based on the *** an ethical scenario about chatbots for teenagers’mental health,we verify that our framework can learn ethical rules and make ethical ***,we extract incremental ILP from the framework and compare it with the state-of-the-art ILP systems based on ASP(Answer Set Programming)focusing on conflict *** results of comparisons show that our proposed system can generate better-quality rules than most other systems.

关键词： Ethical decision-making inductive logic programming incremental learning conflicts