检索结果-南通市图书馆

Superplasticity of fine-grained Mg-10Li alloy prepared by severe plastic deformation and understanding its deformation mechanisms

在线全文

学校读者我要写书评

暂无评论

journal of Magnesium and Alloys 2024年第1期12卷 316-331页

作者： H.T.jeong S.w.Lee w.j.Kim Department of Materials Science and Engineering Hongik UniversityMapo-guSangsu-dong 72-1Seoul 121-791Republic of Korea

The superplastic behavior and associated deformation mechanisms of a fine-grained Mg-10.1 Li-0.8Al-0.6Zn alloy(LAZ1011)with a grain size of 3.2μm,primarily composed of the BCCβphase and a small amount of the HCPαphase,were examined in a temperature range of 473 K to 623 *** microstructural refinement of this alloy was achieved by employing high-ratio differential speed *** best superplasticity was achieved at 523 K and at strain rates of 10^(-4)-5×10^(-4)s^(-1),where tensile elongations of 550±600%were *** the heating and holding stage of the tensile samples prior to tensile loading,a significant increase in grain size was observed at temperatures above 573 ***,it was important to consider this effect when analyzing and understanding the superplastic deformation behavior and *** the investigated strain rate range,the superplastic flow at low strain rates was governed by lattice diffusion-controlled grain boundary sliding,while at high strain rates,lattice diffusion-controlled dislocation climb creep was the rate-controlling deformation *** was concluded that solute drag creep is unlikely to *** the late stages of deformation at 523 K,it was observed that grain boundary sliding led to the agglomeration of theαphase,resulting in significant strain *** mechanism maps were constructed forβ-Mg-Li alloys in the form of 2D and 3D formats as a function of strain rate,stress,temperature,and grain size,using the constitutive equations for various deformation mechanisms derived based on the data of the current tests.

关键词： Magnesium-lithium alloy Superplasticity Severe plastic deformation Grain size Grain growth

Compressive property and energy absorption characteristic of interconnected porous Mg-Zn-Y alloys with adjusting Y addition

在线全文

学校读者我要写书评

暂无评论

journal of Magnesium and Alloys 2024年第1期12卷 171-185页

作者： j.A.Liu S.j.Liu B.wang w.B.Sun X.j.Liu Z.w.Han College of Materials Science and Engineering Key Laboratory of Automobile Materials(Ministry of Education)Jilin UniversityChangchun 130022PR China Key Laboratory of Bionic Engineering(Ministry of Education) College of Biological and Agricultural EngineeringJilin UniversityChangchun130022PR China weihai Institute for Bionics-jilin University Weihai 264205PR China

In this study,interconnected porous Mg-2Zn-xY alloys with different phase compositions were prepared by various Y additions(x=0.4,3,and 6 wt.%)to adjust the compressive properties and energy absorption *** characterization methods were then applied to identify the microstructure of the porous Mg-Zn-Y and describe the details of the second *** tests were performed at room temperature(RT),200℃,and 300℃to study the impact of the Y addition and testing temperature on the compressive properties of the porous *** experimental results showed that a high Y content promotes a microstructure refinement and increases the volume fraction of the second *** the Y content increases,different Mg-Zn-Y ternary phases appear:I-phase(Mg_(3)Zn_(6)Y),w-phase(Mg_(3)Zn_(3)Y_(2)),and LPSO phase(Mg_(12)ZnY).when the Y content ranges between 0.4%and 6%,the compressive strength increases from 6.30MPa to 9.23 MPa,and the energy absorption capacity increases from 7.33 Mj/m^(3)to 10.97 Mj/m^(3)at RT,which is mainly attributed to the phase composition and volume fraction of the second ***,the average energy absorption efficiency is independent of the Y *** addition,the compressive deformation behaviors of the porous Mg-Zn-Y are altered by the testing *** compressive strength and energy absorption capacity of the porous Mg-Zn-Y decrease due to the softening effect of the high temperature on the *** deformation behaviors at different temperatures are finally observed to reflect the failure mechanisms of the struts.

关键词： Porous magnesium Rare earth elements Microstructure Compressive behavior Energy absorption characteristic

SMILE soft X-ray Imager flight model CCD370 pre-flight device characterisation

在线全文

学校读者我要写书评

暂无评论

Earth and Planetary Physics 2024年第1期8卷 25-38页

作者： S.Parsons D.j.Hall O.Hetherington T.w.Buggey T.Arnold M.w.j.Hubbard A.Holland Centre for Electronic Imaging the Open UniversityMilton KeynesMK76AAUK

Throughout the SMILE mission the satellite will be bombarded by radiation which gradually damages the focal plane devices and degrades their *** order to understand the changes of the CCD370s within the soft X-ray Imager,an initial characterisation of the devices has been carried out to give a baseline performance *** CCDs have been characterised,the two flight devices and the flight spa *** has been carried out at the Open University in a bespo ke cleanroom measure ment *** results show that there is a cluster of bright pixels in the flight spa re which increases in size with tempe *** at the nominal ope rating tempe rature(-120℃) it is within the procure ment ***,the devices meet the specifications when ope rating at -120℃ in 6 × 6 binned frame transfer science *** se rial charge transfer inefficiency degrades with temperature in full frame *** any charge losses are recovered when binning/frame transfer is implemented.

关键词： CCD soft X-ray imager characterisation SMILE

The CCD instrument background of the SMILE SXI

在线全文

学校读者我要写书评

暂无评论

Earth and Planetary Physics 2024年第1期8卷 15-24页

作者： M.w.j.Hubbard O.Hetherington D.j.Hall T.w.Buggey S.Parsons T.Arnold A.Holland C.Pagani S.Sembay Centre for Electronic Imaging The Open UniversityMilton KeynesMK76AAUK X-ray and Observational Astronomy Group Department of Physics&AstronomyUniversity of LeicesterLE17RHUK

The ESA and CAS SMILE mission orbit is highly elliptical and will pass through multiple radiation *** Soft X-ray Imager(SXI)instrument aboard has a radiation shutter door designed to close when the surrounding radiation flux is *** shutter door will close when passing below an altitude threshold to protect against trapped particles in the Earth’s Van Allen ***,two radiation environments can be approximated based on the shutter door position:open and *** instrument background for the CCDs(Charge-Coupled Devices)that form the focal plane array of the SXI were evaluated for the two *** to the correlation of the space environment with the solar cycle,the solar minima and maxima,the background was also evaluated at these two *** results demonstrated that the highest instrument background will occur during solar minima due to the main contributing source being Galactic Cosmic Rays(GCRs).It was also found that the open background was highest for solar minima and that the closed background was highest during solar *** is due to the radiation shutter door acting as a scattering centre and the changes in the energy flux distribution of the GCRs between the two solar extremes.

关键词： instrument background X-ray astronomy space radiation

Full Dynamic Model for Liquid Sloshing Simulation in Cylindrical Tank Shape

在线全文

学校读者我要写书评

暂无评论

world journal of Mechanics 2024年第4期14卷 55-72页

作者： Omar Noui Mohamed Bouazara marc j. Richard Department of Applied Science University of Quebec at Chicoutimi Chicoutimi Canada Department of Mechanical Engineering Laval University Quebec Canada

This study presents a comprehensive full dynamic model designed for simulating liquid sloshing behavior within cylindrical tank structures. The model employs a discretization approach, representing the liquid as a network of interconnected spring-damper-mass systems. Key aspects include the adaptation of liquid discretization techniques to cylindrical lateral cross-sections and the calculation of stiffness and damping coefficients. External forces, simulating various vehicle maneuvers, are also integrated into the model. The resulting system of equations is solved using Maple Software with the Runge-Kutta-Fehlberg method. This model enables accurate prediction of liquid displacement and pressure forces, offering valuable insights for tank design and fluid dynamics applications. Ongoing refinement aims to broaden its applicability across different liquid types and tank geometries.

关键词： Fluid-Structure Interaction Equivalent Mechanical Model Liquid Discretization Spring-Mass Model Spring-Mass Network Liquid Simulation

Generalized time-dependent generator coordinate method for induced fission dynamics

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of physics 2024年第4期19卷 1-12页

作者： B.Li D.Vretenar T.Nikšić j.Zhao P.w.Zhao j.Meng State Key Laboratory of Nuclear Physics and Technology School of PhysicsPeking UniversityBeijing 100871China Physics Department Faculty of ScienceUniversity of Zagreb10000 ZagrebCroatia Center for Circuits and Systems Peng Cheng LaboratoryShenzhen 518055China

The generalized time-dependent generator coordinate method(TD-GCM)is extended to include pairing *** correlated GCM nuclear wave function is expressed in terms of time-dependent generator states and weight *** particle–hole channel of the effective interaction is determined by a Hamiltonian derived from an energy density functional,while pairing is treated dynamically in the standard BCS approximation with time-dependent pairing tensor and single-particle occupation *** the inclusion of pairing correlations,various time-dependent phenomena in open-shell nuclei can be described more *** model is applied to the description of saddle-to-scission dynamics of induced *** generalized TD-GCM charge yields and total kinetic energy distribution for the fission of 240Pu,are compared to those obtained using the standard time-dependent density functional theory(TD-DFT)approach,and with available data.

关键词： nuclear density functional theory generator coordinate method fission dynamics

In situ digital testing method for quality assessment of soft soil improvement with polyurethane

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Rock Mechanics and Geotechnical Engineering 2024年第5期16卷 1732-1748页

作者： X.F.wang C.j.wang w.V.Yue Z.j.Zhang Z.Q.Yue Department of Civil Engineering China University of Geosciences (Beijing)BeijingChina Department of water Science and Engineering Zhengzhou UniversityZhengzhouChina Department of Geotechnical Engineering Tongji UniversityShanghaiChina Department of Civil Engineering The University of Hong KongChina

This study purposes an in situ testing method on quality assessment of soil *** drilling data includes the spatial distribution and in situ strength of untreated and treated soil along three different drillholes measured by on-site drilling monitoring *** factual drilling data can characterize the degree of soil improvement by penetration injection with permeable *** from on-site drilling monitoring shows that the linear zones represent constant drilling speeds shown in the plot of drill bit advancement *** drilling time,which indicates the spatial distributions of soil *** soil profile at the study site is composed of four layers,which includes fill,untreated silty clay,treated silty clay,and mucky *** results of soil profile are verified by the parallel site *** constant drilling speeds profile the coring-resistant strength of drilled *** comparing with the untreated silty clay,the constant drilling speeds of the treated silty clay have been decreased by 13.0-62.8%.Two drilling-speed-based indices of 61.2%and 65.6%are proposed to assess the decreased average drilling speed and the increased in situ strength of treated silty *** tests,*** compressive strength(UCS)test,have been performed with core sample to investigate and characterize in situ strength by comparing that with drilling *** show that the average predicted strengths of treated silty clay are 2.4-6.9 times higher than the average measured strength of untreated silty *** UCS-based indices of 374.5%and 344.2%verified the quality assessment(QA)results by this new in situ *** method provides a cost-effective tool for quality assessment of soil improvement by utilizing the digital drilling data.

关键词： Drilling process monitoring system Hydraulic rotary drilling process Constant drilling speed Soil improvement Quality assessment

A hydrodynamic modelling of wave-activated bodies for wavelet marine regions

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CLEAN ENERGY 2024年第2期8卷 35-47页

作者： Peh, j. S. Muhieldeen, Mohammed w. Shuaib, N. H. UCSI Univ Fac Engn Technol & Built Environm Mech Engn Dept Kuala Lumpur 56000 Malaysia MTC Engineer Sdn Bhd Shah Alam Selangor Malaysia

Recently, most wave energy research has targeted sea areas with high power density under extreme wave conditions for deployment. This trend often leads to higher energy costs for wave power plants. However, many marine areas with low power density, characterized by wavelet conditions and less destructive forces than extreme wave conditions, remain underexplored. Therefore, this study aimed to propose a wave-activated body model for sea regions with wavelet conditions. The wave-activated body design process encompassed site selection, parameter determination, geometry design, comparison and performance evaluation using the ANSYS (R) AQwA model. The results indicated that the proposed device achieved the desired heave motion, with an amplitude range of 1.2 to -2.5 m, validating its potential for deployment in marine regions with wavelet conditions. Notably, while the proposed design is optimized for wavelet conditions, it was found to have potential limitations in extreme wave environments. This observation emphasizes the challenge of formulating a generalized design suitable for both conditions. Consequently, it is pivotal for wave-activated body designs to be customized based on the specific ocean conditions they target, underscoring the need for specialized designs of wave energy converters that consider the unique wave characteristics of their deployment sites. A wave-activated body is designed for energy generation in ocean regions with wavelet conditions. Hydrodynamic modelling is carried out for two locations with different wave characteristics to determine the optimum conditions for deployment. Graphical Abstract

关键词： wave energy converter South China sea renewable and sustainable energy wavelet ANSYS AQwA hydrodynamic wave-activated bodies ENERGY IMPACT

Management of monogenic diabetes in pregnancy:A narrative review

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

world journal of Diabetes 2024年第1期15卷 15-23页

作者： Mohammad Sadiq jeeyavudeen Sarah R Murray Mark w j Strachan Metabolic Unit Western General HospitalEdinburgh EH42XUUnited Kingdom MRC Centre for Reproductive Health University of Edinburgh Queen’s Medical Research InstituteEdinburgh EH164TJUnited Kingdom

Pregnancy in women with monogenic diabetes is potentially complex,with significant implications for both maternal and fetal *** these,maturity-onset diabetes of the young(MODY)stands out as a prevalent monogenic diabetes subtype frequently encountered in clinical *** subtype of MODY requires a distinct approach tailored to the pregnancy,diverging from management strategies in non-pregnant *** MODY(GCK-MODY)typically does not require treatment outside of pregnancy,but special considerations arise when a woman with GCK-MODY becomes *** glycemic targets in GCK-MODY pregnancies are not exclusively dictated by the maternal/paternal MODY genotype but are also influenced by the genotype of the developing *** pregnancy,the choice between sulfonylurea or insulin for treating hepatocyte nuclear factor 1-alpha(HNF1A)-MODY and HNF4A-MODY depends on the mother’s specific circumstances and the available *** of other rarer MODY subtypes is individu-alized,with decisions made on a case-by-case ***,a collaborative approach involving expert diabetes and obstetric teams is crucial for the compre-hensive management of MODY pregnancies.

关键词： Diabetes Pregnancy Maturity-onset diabetes of the young Insulin Sulphonylurea Glucokinase Hepatocyte nuclear factor 1-alpha,hepatocyte nuclear factor 1-beta,and hepatocyte nuclear factor 4-alpha