检索结果-南通市图书馆

Electrochemical Immunosensor for Detection of Atrazine Based on Polyaniline/Graphene

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Journal of Materials Science & Technology 2016年第6期32卷 539-544页

作者： nguyen van Chu nguyen Hai Binh Cao Thi Thanh nguyen van Tu nguyen Le Huy nguyen Tuan Dzung Phan Ngoc Minh Vu Thi Thu Tran Dai Lam Institute of Materials Science Vietnam Academy of Science and Technology18 Hoang Quoc VietCau Giay.HanoiViet Nam School of Chemical Engineering.Hanoi University of Science and Technology 1 Dai Co VietHanoiViet Ham Institute for Tropical Technology.Vietnam Academy of Science and Technology 18 Hoang Quoc VietHanoiViet Nam Center for High Technology Development Vietnam Academy of Science and Technology18 Hoang Quoc VietHanoiViet Nam University of Science and Technology of Hanoi.18 Hoang Quoc Viet HanoiViet Ham Graduate University of Science and Technology.Vietnam Academy of Science and Technology 18 Hoang Quoc Viet.HanoiViet Nam

In this study, a novel layer-by-layer polyaniline/graphene （PANi/Gr） structure for electrochemical detec- tion of atrazine was developed. Gr film was synthesized by thermal chemical vapor deposition （CVD） method and transferred onto the PANi-predeposited microelectrode. The properties of PANi/Gr film were thoroughly investigated by high-resolution transmission electron microscopy and Raman techniques. The most attractive feature of this system is a suitable microenvironment, which could provide an amplifi- cation of the conductive signal, thus may contribute to enhancing electron transfer and subsequently improve the sensitivity in electrochemical measurements. With low detection limit （- 43 × 10 -12 g/L）, ac-ceptable stability and good reproducibility, the proposed electrochemical immunosensor could be advantageously extended for multiplexed detection of other agents of environmental pollution.

关键词： Electrochemical immunosensor Polyaniline Graphene Atrazine

Automatic Identification Fingerprint Based on Machine Learning Method

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Journal of the Operations Research Society of China 2022年第4期10卷 849-860页

作者： Long The nguyen Huong Thu nguyen Alexander Diomidovich Afanasiev Tao van nguyen Laboratory of Artificial Intelligence and Machine Learning Institute of Information Technology and Data ScienceIrkutsk National Research Technical UniversityIrkutskRussia Baikal School of BRICS Irkutsk National Research Technical UniversityIrkutskRussia University of Information and Communication Technology Thai Nguyen UniversityThai NguyenViet Nam

The fingerprint identification technology has been developed and applied effectively to security systems in financial transactions,personal information security,national security,and other *** this paper,we proposed the development of a fingerprint identification system based on image processing methods that clarify fingerprint contours,using machine learning methods to increase processing speed and increase the accuracy of the fingerprint identification *** identification system consists of the following main steps:improving image quality and image segmentation to identify the fingerprint area,extracting features,and matching the *** accuracy of the system reached 97.75%on the mixed high-and low-quality fingerprint database.

关键词： Fingerprint identification Feature extraction Image segmentation Wavelet transform Neural network algorithm Machine learning

Bifurcation Analysis of the Voltage Controlled Photosensitive Chaotic Oscillator

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics Letters 2013年第6期30卷 42-45页

作者： van Ha nguyen Han Jung Song Department of Nano Systems Engineering Inje UniversityGimhae 621-749Korea Center for Nano Manufacturing Inje UniversityGimhae 621-749Korea

A photosensitive chaotic oscillator which can be controlled with light illumination under various control voltage levels is *** oscillator consists of a photodiode for the light input,clock switches and capacitors for the sample and hold function,a nonlinear function that creates an adjustable chaos map,and a voltage shifter that adjusts the output voltage for *** optimizing the photodiode sub-circuit by using an available photodiode model in PC-based simulation program with integrated circuit emphasis to obtain a suitable output,the full chaotic circuit is verified with standard 0.6-μm complementary metal oxide semiconductor *** dynamics are analyzed as a function of the light intensity under different control voltage *** time series,frequency spectra,transitions in state spaces,bifurcation diagrams and the largest Lyapunov exponent are improved.

关键词： oscillator chaotic function

A novel finite element formulation for static bending analysis of functionally graded porous sandwich plates

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2022年第12期16卷 1599-1620页

作者： van Chinh nguyen Trung Thanh TRAN Trung nguyen-THOI Quoc-Hoa PHAM Faculty of Mechanical Engineering Le Quy Don Technical UniversityHanoiVietnam Laboratory for Applied and Industrial Mathematics Institute for Computational Science and Artificial IntelligenceVan Lang UniversityHo Chi Minh CityVietnam Faculty of Mechanical-Electrical and Computer Engineering Van Lang UniversityHo Chi Minh CityVietnam Faculty of Engineering and Technology Nguyen Tat Thanh UniversityHo Chi Minh CityVietnam

This article aims to propose a finite element formulation based on Quasi-3D theory for the static bending analysis of functionally graded porous(FGP)sandwich *** FGP sandwich plates consist of three layers including the bottom skin of homogeneous metal,the top skin of fully ceramic and the FGP core layer with uneven porosity distribution.A quadrilateral(Q4)element with nine degrees of freedom(DOFs)per node is derived and employed in analyzing the static bending response of the plate under uniform and/or sinusoidally distributed *** accuracy of the present finite element formulation is verified by comparing the obtained numerical results with the published results in the ***,some numerical examples are performed to examine the effects of the parameters including power-law index k and porosity coefficient on the static bending response of rectangular FGP sandwich *** addition,a problem with a complicated L-shape model is conducted to illustrate the superiority of the proposed finite element method.

关键词： sandwich plates functionally graded porous static bending Quasi-3D theory Q4 element

Isogeometric analysis for free vibration of bidirectional functionally graded plates in the fluid medium

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2022年第8期18卷 1311-1329页

作者： Quoc-Hoa Pham Phu-Cuong nguyen van Ke Tran Trung nguyen-Thoi Faculty of Civil Engineering Ho Chi Minh City Open UniversityHo Chi Minh CityViet Nam Faculty of Mechanical Engineering Le Quy Don Technical UniversityHanoiViet Nam Division of Computational Mathematics and Engineering Institute for Computational ScienceTon Duc Thang UniversityHo Chi Minh CityViet Nam Faculty of Civil Engineering Ton Duc Thang UniversityHo Chi Minh CityViet Nam

This paper for first time proposes an isogeometric analysis (IGA) for free vibration response of bi-directional functionally graded (BDFG) rectangular plates in the fluid medium. Material properties of the BDFG plate change in both the thickness and length directions via power-law distributions and Mori-Tanaka model. The governing equation of motion of BDFG plate in the fluid-plate system is formulated basing on Hamilton's principle and the refined quasi three-dimensional (3D) plate theory with improved function f(z). The fluid velocity potential is derived from the boundary conditions of the fluid-plate system and is used to determine the added mass. The discrete system of equations is derived from the Galerkin weak form and numerically analyzed by IGA. The accuracy and reliability of the proposed solutions are verified by comparing the obtained results with those published in the literature. Moreover, the effects of the various parameters such as the interaction boundary condition, geometric parameter, submerged depth of plate, fluid density, fluid level, and the material volume control coefficients on the free vibration behavior of BDFG plate in the fluid medium are investigated in detail. Some major findings regarding the numerical results are withdrawn in conclusions.

关键词： Contact plate-fluid Refined quasi 3D plate theory Mori-Tanaka model Isogeometric analysis Bidirectional functionally graded plate

Static analysis of corrugated panels using homogenization models and a cell-based smoothed mindlin plate element (CS-MIN3)

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2019年第2期13卷 251-272页

作者： Nhan nguyen-MINH Nha TRAN-van Thang BUI-XUAN Trung nguyen-THOI Faculty of Applied Science Bach Khoa University (BKU)Ho Chi Minh CityVietnam Faculty of Mathematics and Computer Science Ho Chi Minh City University of Science (HCMUS)Ho Chi Minh CityVietnam Department of Mathematics L ouisiana State UniversityBaton RougeLA 70803USA Division of Computational Mathematics and Engineering Institute of Computational ScienceTon Due Thang UniversityHo Chi Minh CityVietnam Faculty of Civil Engineering Ton Due Thang UniversityHo Chi Minh CityVietnam

Homogenization is a promising approach to capture the behavior of complex structures like corrugated panels. It enables us to replace high-cost shell models with stiffness-equivalent orthotropic plate alternatives. Many homogenization models for corrugated panels of different shapes have been proposed. However, there is a lack of investigations for verifying their accuracy and reliability. In addition, in the recent trend of development of smoothed finite element methods, the cell-based smoothed three-node Mindlin plate element (CS-MIN3) based on the first-order shear deformation theory (FSDT) has been proposed and successfully applied to many analyses of plate and shell structures. Thus, this paper further extends the CS-MIN3 by integrating itself with homogenization models to give homogenization methods. In these methods, the equivalent extensional, bending, and transverse shear stiftriess components which constitute the equivalent orthotropic plate models are represented in explicit analytical expressions. Using the results of ANSYS and ABAQUS shell simulations as references, some numerical examples are conducted to verify the accuracy and reliability of the homogenization methods for static analyses of trapezoidally and sinusoidally corrugated panels.

关键词： homogenization corrugated panel asymptotic analysis smoothed finite element method (S-FEM) cell-based smoothed three-node Mindlin plate element (CS-MIN3)

Building 3D CityGML models of mining industrial structures using integrated UAV and TLS point clouds

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

International Journal of Coal Science & Technology 2023年第5期10卷 158-177页

作者： Canh Le van Cuong Xuan Cao Anh Ngoc nguyen Chung van Pham Long Quoc nguyen Department of Mine Surveying Hanoi University of Mining and GeologyHanoiVietnam Viettel Group Viettel Cyberspace CenterHanoiVietnam

Mining industrial areas with anthropogenic engineering structures are one of the most distinctive features of the real world.3D models of the real world have been increasingly popular with numerous applications,such as digital twins and smart factory *** this study,3D models of mining engineering structures were built based on the CityGML *** collecting spatial data,the two most popular geospatial technologies,namely UAV-SfM and TLS were *** accuracy of the UAV survey was at the centimeter level,and it satisfied the absolute positional accuracy requirement of creat-ing all levels of detail(LoD)according to the CityGML ***,the UAV-SfM point cloud dataset was used to build LoD 2 *** addition,the comparison between the UAV-SfM and TLS sub-clouds of facades and roofs indicates that the UAV-SfM and TLS point clouds of these objects are highly consistent,therefore,point clouds with a higher level of detail and accuracy provided by the integration of UAV-SfM and TLS were used to build LoD 3 *** resulting 3D CityGML models include 39 buildings at LoD 2,and two mine shafts with hoistrooms,headframes,and sheave wheels at LoD3.

关键词： 3D modelling CityGML-Mining industry UAV Terrestrial laser scanning Point cloud

Marketing Strategies Evaluation and Selection for Supply Chain Management Under Uncertainty

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2022年第12期73卷 6535-6546页

作者： Ngo Quang Trung nguyen van Thanh Faculty of Commerce Van Lang UniversityHo Chi Minh City70000Vietnam

Sustainable marketing,often known as green marketing,has grown in popularity over the last two *** is currently putting pressure to encourage firms to become environmentally aware in multiple aspects like human and financial utilization,advertisement,and product *** types of companies are including many environmental campaigns into their own products to take advantage of the *** many scholars have addressed the relevance of green marketing as well as theory development,this study is unique in that it examines both techniques in a fuzzy *** integrated Fuzzy Multicriteria Decision Making Model(MCDM)of the analytical hierarchy process(AHP)and a Portuguese-acronymous MCDM method(TODIM)are used to select the best marketing strategy from five alternatives:(i)Green Design,(ii)Green Positioning,(iii)Green Pricing,(v)Green Packaging,and(iv)Green *** on criteria such as the scale of the green market,price parity,and the commitment of top *** for evaluating green marketing strategies was established in the study as contributions for decisionmakers in this field under unclarified *** research also a useful guideline for ranking alternatives in others industry.

关键词： Green marketing MCDM model sustainable marketing strategy

Pointed p^3-Dimensional Hopf Algebras in Positive Characteristic

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Algebra Colloquium 2018年第3期25卷 399-436页

作者： van C. nguyen Xingting Wang Department of Mathematics Hood College Frederick MD 21701 USA Department of Mathematics Howard University Washington DC 20059 USA

We focus on the classification of pointed p^3-dimensional Hopf algebras H over any algebraically closed field of prime characteristic p 〉 0. In particular, we consider certain cases when the group of grouplike elements is of order p or p^2 that is, when H is pointed but is not connected nor a group algebra. The structures of the associated graded algebra gr H are completely described as bosonizations of graded braided Hopf algebras over group algebras, and most of the lifting structures of H are given. This work provides many new examples of （parametrized） non-commutative, non-cocommutative finite- dimensional Hopf algebras in positive characteristic.

关键词： braided Hopfalgebras Yetter-Drinfeld modules positive characteristic pointed Hopf algebras Nichols algebras