检索结果-南通市图书馆

Transactions of Nonferrous Metals Society of China 2024年

作者： A.g.Lekatou B.v.efremenko v.Haoui v.g.efremenko S.Emmanouilidou v.I.Zurnadzhy I.Petryshynets Yu.g.Chabak I.I.Sili Laboratory of Applied Metallurgy Department of Materials Science and Engineering School of Engineering University of Ioannina Institute of Materials Science and Computing University Research Center of Ioannina (URCI) Pryazovskyi State Technical University Department of Physics Institute of Materials Research of Slovak Academy of Sciences

Wrought and laser powder bed fusion （LPBF） Ti-6Al-4v specimens were comparatively evaluated， with the objective to determine LPBF Ti-6-4’s suitability for biomedical applications. Testing included nanoindentation， cyclic polarization in simulated body fluid （SBF， 37 ℃ ）， and dry and SBF “Ball-on-Plate” sliding. Wrought Ti-6-4 exhibited a lamellar （α+β） microstructure， whereas LPBF displayed a fine-grained α'-martensite microstructure. LPBF Ti-6-4 demonstrated ～3% higher indentation modulus and ～32% higher hardness， while wrought Ti-6-4 showed ～8% higher plasticity. Both alloys exhibited low corrosion rates (10–5mA/cm2order) and true passivity (10–4mA/cm2order). No localized corrosion was observed in either alloy， except for occasional metastable pitting in the LPBF alloy. However， LPBF Ti-6-4 presented higher corrosion rate and passive current， ascribed to its martensitic structure. During dry sliding， LPBF Ti-6-4 exhibited ～14% lower volume loss compared to wrought Ti-6-4. Sliding in SBF increased volume losses for both alloys， with wear resistances nearly equalized， as the advantage of LPBF Ti-6-4 decreased due to more intensive wear-accelerated corrosion induced by the stressed martensite. Overall， the results demonstrate the suitability of LPBF Ti-6Al-4v for biomedical uses.

关键词：

Microstructure and phase elemental distribution in high-boron multicomponent cast irons

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2022年第1期29卷 78-87页

作者： Yu.g.Chabak K.Shimizu v.g.efremenko M.A.golinskyi K.Kusumoto v.I.Zurnadzhy A.v.efremenko Physics Department Pryazovskyi State Technical UniversityMariupol87555Ukraine Mechanical Engineering Research Unit College of Design and Manufacturing TechnologyMuroran Institute of TechnologyMuroran-city050-8585Japan

The novel cast irons of chemical composition(wt%)0.7C-5W-5Mo-5v-10Cr-2.5Ti were invented with the additions of 1.6wt%B and 2.7wt%*** aim of this work was to study the effect of boron on the structural state of the alloys and phase elemental distribution with respect to the formation of wear-resistant structural *** was found that the alloy containing 1.6wt%B was composed of three eutectics:(a)“M_(2)(C,B)_(5)+ferrite”having a“Chinese Script”morphology(89.8vol%),(b)“M_(7)(C,B)_(3)+Austenite”having a“Rosette”morphology,and(c)“M_(3)C+Austenite”having a“Ledeburite”-shaped morphology(2.7vol%).With 2.7wt%of boron content,the bulk hardness increased from HRC 31 to HRC *** primary carboborides M_(2)(C,B)_(5) with average microhardness of Hv 2797 appeared in the structure with a volume fraction of 17.6vol%.The volume fraction of eutectics(a)and(b,c)decreased to 71.2vol%and 3.9vol%,*** matrix was“ferrite/austenite”for 1.6wt%B and“ferrite/pearlite”for 2.7wt%*** cast irons contained compact precipitates of carbide(Ti,M)C and carboboride(Ti,M)(C,В)with a volume fraction of 7.3%-7.5%.Based on the energy-dispersive X-ray spectroscopy,the elemental phase distributions and the appropriate phase formulas are presented in this work.

关键词： multi-component cast iron boron eutectic carbide carboboride

Abrasive resistance of metastable v–Cr–Mn–Ni spheroidal carbide cast irons using the factorial design method

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2016年第6期23卷 645-657页

作者： v.g.efremenko K.Shimizu A.P.Cheiliakh T.v.Pastukhova Yu.g.Chabak K.Kusumoto Department of Metal Science and Heat Treatments of Metals Pryazovskyi State Technical University Department of Mechanical Aerospace and Materials Engineering Muroran Institute of Technology

Full factorial design was used to evaluate the two-body abrasive resistance of 3wt%C–4wt%Mn–1.5wt%Ni spheroidal carbide cast irons with varying vanadium（5.0wt%–10.0wt%） and chromium（up to 9.0wt%） contents. The alloys were quenched at 920℃. The regression equation of wear rate as a function of v and Cr contents was proposed. This regression equation shows that the wear rate decreases with increasing v content because of the growth of spheroidal vC carbide amount. Cr influences the overall response in a complex manner both by reducing the wear rate owing to eutectic carbides（M7C3） and by increasing the wear rate though stabilizing austenite to deformation-induced martensite transformation. This transformation is recognized as an important factor in increasing the abrasive response of the alloys. By analyzing the regression equation, the optimal content ranges are found to be 7.5wt%–10.0wt% for v and 2.5wt%–4.5wt% for Cr, which corresponds to the alloys containing 9vol%–15vol% spheroidal vC carbides, 8vol%–16vol% M7C3, and a metastable austenite/martensite matrix. The wear resistance is 1.9–2.3 times that of the traditional 12wt% v–13wt% Mn spheroidal carbide cast iron.

关键词： cast irons carbides abrasive resistance factorial design

Effect of vanadium and chromium on the microstructural features of v–Cr–Mn–Ni spheroidal carbide cast irons

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2014年第11期21卷 1096-1108页

作者： v.g.efremenko K.Shimizu A.P.Cheiliakh T.v.Kozarevskaya K.Kusumoto K.Yamamoto Department of Metal Science and Heat Treatment of Metals Pryazovskyi State Technical UniversityMariupol 87500 Ukraine Manufacturing and Engineering Design Center Muroran Institute of TechnologyMuroran 050-8585 Japan

The objective of this investigation is to study the influence of vanadium（5.0wt%–10.0wt%） and chromium（0–9.0wt%） on the microstructure and hardness of Cr-v-Mn-Ni white cast irons with spheroidal vanadium carbides. The alloys＇ microstructural features are presented and discussed with regard to the distribution of phase elements. The structural constituents of the alloys are spheroidal vC, proeutectoid cementite, ledeburite eutectic, rosette-shaped carbide eutectic（based on M7C3）, pearlite, martensite, and austenite. Their combinations and area fraction（AF） ratios are reported to be influenced by the alloys＇ chemical composition. Spheroidized vC particles are found to be sites for the nucleation of carbide eutectics. Cr and v are shown to substitute each other in the vC and M7C3 carbides, respectively. Chromium alloying leads to the formation of a eutectic（γ-Fe ＋ М7С3）, preventing the appearance of proeutectoid cementite in the structure. vanadium and chromium are revealed to increase the total carbide fraction and the amount of austenite in the matrix. Cr is observed to play a key role in controlling the metallic matrix microstructure.

关键词： cast irons carbides microstructure vanadium chromium austenite pearlite

Bio-Inspired Intelligent Routing in WSN: Integrating Mayfly Optimization and Enhanced Ant Colony Optimization for Energy-Efficient Cluster Formation and Maintenance

在线全文

学校读者我要写书评

暂无评论

Computer Modeling in Engineering & Sciences 2024年第10期141卷 127-150页

作者： v.g.Saranya S.Karthik Department of Electronics and Communication Engineering Faculty of Engineering&TechnologySRM Institute of Science and TechnologyVadapalani CampusChennai600026India

Wireless Sensor Networks(WSNs)are a collection of sensor nodes distributed in space and connected through wireless *** sensor nodes gather and store data about the real world around ***,the nodes that are dependent on batteries will ultimately suffer an energy loss with time,which affects the lifetime of the *** research proposes to achieve its primary goal by reducing energy consumption and increasing the network’s lifetime and *** present technique employs the hybrid Mayfly Optimization Algorithm-Enhanced Ant Colony Optimization(MFOA-EACO),where the Mayfly Optimization Algorithm(MFOA)is used to select the best cluster head(CH)from a set of nodes,and the Enhanced Ant Colony Optimization(EACO)technique is used to determine an optimal route between the cluster head and base *** performance evaluation of our suggested hybrid approach is based on many parameters,including the number of active and dead nodes,node degree,distance,and energy *** objective is to integrate MFOA-EACO to enhance energy efficiency and extend the network life of the WSN in the *** proposed method outcomes proved to be better than traditional approaches such as Hybrid Squirrel-Flying Fox Optimization Algorithm(HSFLBOA),Hybrid Social Reindeer Optimization and Differential Evolution-Firefly Algorithm(HSRODE-FFA),Social Spider Distance Sensitive-Iterative Antlion Butterfly Cockroach Algorithm(SADSS-IABCA),and Energy Efficient Clustering Hierarchy Strategy-Improved Social Spider Algorithm Differential Evolution(EECHS-ISSADE).

关键词： Enhanced ant colony optimization mayfly optimization algorithm wireless sensor networks cluster head base station(BS)

Use of an immunocapture device to detect cytokine release in discrete brain regions

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Neural Regeneration Research 2024年第4期19卷 703-704页

作者： Matthew g.Frank Michael v.Baratta Department of Integrative Physiology University of Colorado BoulderBoulderCOUSA(Frank MG)Department of Psychology and NeuroscienceUniversity of Colorado BoulderBoulderCOUSA(Baratta MV)

Production of proinflammatory cytokines in the central nervous system is a key process in the neuroinflammatory response to trauma,infection,and neurodegenerative diseases(Kumar,2019).These intercellular signaling molecules play multiple roles in the immune response in the central nervous system including the orchestration of the sickness response to innate immune perturbations in the brain(Dantzer et al.,2008).

关键词： system release innate

Magnesium oxide(MgO)nanoadsorbents in wastewater treatment:A comprehensive review

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第5期12卷 1709-1773页

作者： H.C.S.Perera v.gurunanthanan Anoop Singh M.M.M.g.P.g.Mantilaka g.Das Sandeep Arya Department of Physics Khalifa UniversityAbu Dhabi12788United Arab Emirates Postgraduate Institute of Science University of PeradeniyaPeradeniyaSri Lanka Department of Humanities and Sciences Guru Nanak Institutions Technical CampusIbrahimpatnamHyderabad501506India Centre for global Health Research Saveetha Medical College and HospitalsSaveetha Institute of Medical and Technical SciencesChennai602105Tamil NaduIndia Department of Physics University of JammuJammu and Kashmir180006India

Wastewater contamination by heavy metals and synthetic dyes presents a significant environmental challenge,necessitating effective and sustainable separation *** review article provides a detailed examination of magnesium oxide(MgO)nanoparticles as an innovative nanoadsorbent for wastewater treatment,with a specific focus on heavy metal and dye *** review comprehensively explores various aspects of MgO nanoparticles,including their structural characteristics and synthesis *** article delves into the morphology and crystallographic arrangement of MgO nanoparticles,offering insights into their structural *** the complexity of adsorption processes,the review identifies and analyzes parameters influencing the adsorption efficiency of MgO nanoparticles,such as temperature,pH,contact time,initial concentration,and co-existing *** interplay between these parameters and the adsorption capability of MgO nanoparticles emphasizes the importance of optimizing operational ***,the review assesses various synthesis methods for MgO nanoparticles,including sol-gel,hydrothermal,precipitation,green synthesis,solvothermal,and template-assisted *** discusses the advantages,limitations,and resulting nanoparticle characteristics of each method,enabling readers to grasp the implications of synthesis processes on adsorption *** comprehensive review consolidates current insights into the effectiveness of MgO nanoparticles as a potent nanoadsorbent for removing heavy metals and dyes from wastewater covering a wide spectrum of aspects related to MgO ***,there is a need to investigate the use of MgO in the treatment of actual wastewater or river water,in order to leverage its cost-effectiveness and high efficiency for practical water treatment applications in real-time.

关键词： MgO nanoparticles Nanoadsorbent Wastewater treatment Heavy metals Dye separation Adsorption Synthesis methods

Cluster Analysis of the Roma-BZCAT Blazars

在线全文

学校读者我要写书评

暂无评论

Research in Astronomy and Astrophysics 2024年第5期24卷 117-139页

作者： Dmitry O.Kudryavtsev Yulia v.Sotnikova vladislav A.Stolyarov Timur v.Mufakharov valery v.vlasyuk Margarita L.Khabibullina Alexander g.Mikhailov Yulia v.Cherepkova Special Astrophysical Observatory of the Russian Academy of Sciences Nizhny Arkhyz 369167Russia Astrophysics group Cavendish LaboratoryUniversity of CambridgeCambridge CB3 OHEUK Kazan Federal University 18 Kremlyovskaya StKazan 420008Russia

Based on the collected multiwavelength data, namely in the radio(NvSS, FIRST, RATAN-600), IR(WISE),optical(Pan-STARRS), Uv(gALEX), and X-ray(ROSAT, Swift-XRT) ranges, we have performed a cluster analysis for the blazars of the Roma-BZCAT catalog. Using two machine learning methods, namely a combination of PCA with k-means clustering and Kohonen's self-organizing maps(SOMs), we have constructed an independent classification of the blazars(five classes) and compared the classes with the known Roma-BZCAT classification(FSRQs, BL Lacs, galaxy-dominated BL Lacs, and blazars of an uncertain type) as well as with the high synchrotron peaked(HSP) blazars from the 3HSP catalog and blazars from the TevCat catalog. The obtained groups demonstrate concordance with the BL Lac/FSRQ classification along with a continuous character of the change in the properties. The group of HSP blazars stands out against the overall distribution. We examine the characteristics of the five groups and demonstrate distinctions in their spectral energy distribution shapes. The effectiveness of the clustering technique for objective analysis of multiparametric arrays of experimental data is demonstrated.

关键词： methods data analysis-galaxies active-(galaxies:)BL Lacertae objects general

Agglomeration of coal and polyethylene mixtures during fixed‑bed co‑gasification

在线全文

学校读者我要写书评

暂无评论

International Journal of Coal Science & Technology 2024年第2期11卷 91-100页

作者： Igor g.Donskoy Aleksandr N.Kozlov Maksim v.Penzik Denis A.Svishchev Lu Ding Melentiev Energy Systems Institute Russian Federation130 Lermontova StreetIrkutskRussia 664033 East China University of Science and Technology 130 Meilong RoadShanghai 200237China

The article presents the results of experimental studies on the gasification of mixtures of brown coal and polyethylene(up to 20 wt%fraction)in a laboratory *** work aims to study the agglomeration process during the heating and oxidation of the *** measurement results(gas composition,pressure drop)provide indirect information on the dynamics of thermal decomposition and structural changes in the fuel *** have shown that the interaction between polyethylene and a coal surface leads to the formation of dense agglomerates,in which the molten polymer acts as a *** form as a result of interfacial interactions between components and filtration flow *** hydrogen/carbon ratio in the solid residue of coal-polyethylene co-gasification increases from 0.07–0.2 to 1.11,indicating the formation of stable hydrocarbon compounds on the carbon *** conducted research makes it possible to identify possible interactions between chemical reactions and transfer processes that lead to agglomeration in mixtures of coal with polyethylene.

关键词： Coal Polyethylene gasification Combustion Agglomeration

B-L model with D_(4)×Z_(4)×Z_(2)symmetry for fermion mass hierarchies and mixings

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics C 2024年第6期48卷 11-30页

作者： v.v.vien Department of Physics Tay Nguyen UniversityDaklakVietnam

We constructed a gauge B-L model with D_(4)×Z_(4)×Z_(2)symmetry to explain the quark and lepton mass hierarchies and their mixings with realistic CP phases via the type-I seesaw *** quark mases,three quark mixing angles,and the CP phase in the quark sector take the central values whereas Yukawa couplings in the quark sector are diluted in a range of difference of three orders of magnitude by the perturbation theory at the first *** the neutrino sector,a small neutrino mass is achieved by the type-I seesaw *** inverted and normal neutrino mass hierarchies are consistent with the experimental *** predicted sum of neutrino masses for normal and inverted hierarchies,the effective neutrino masses,and the Dirac CP phase are also consistent with recently reported limits.

关键词： flavor symmetries quark and lepton masses and mixing extensions of electroweak gauge sector neutrino mass and mixing non-standard-model neutrinos right-handed neutrinos D4 discrete symmetry