检索结果-南通市图书馆

Recent progress in side chain engineering of Y-series non-fullerene molecule and polymer acceptors

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China Chemistry 2024年第3期67卷 788-805页

作者： li tian Chunchen liu Fei Huang School of Materials Science and Engineering Henan University of TechnologyZhengzhou 450001China Institute of Polymer Optoelectronic Materials and Devices State Key Laboratory of Luminescent Materials and DevicesSouth China University of TechnologyGuangzhou 510640China

Organic solar cells(OSCs) have drawn considerable attention in the last decade due to the great potential of light weight,flexibility, and low-cost solution processing. Particularly, Y-series non-fullerene acceptors(NFAs) including small molecular acceptors(SMAs) and polymerized small molecular acceptors(PSMAs) have become research hot spots due to their excellent power conversion efficiency. Side chain engineering is crucial to adjust the solubility and crystallinity of NFAs, which will significantly affect the morphology of active layers and the efficiency of OSCs. However, the understanding of side chain engineering on NFAs is still limited and lacks a systematic review. This review aims to provide a brief summary of the recent developments in side chain engineering of NFAs, with a special focus on the design and application of Y-series SMAs and PSMAs for high-efficiency non-fullerene organic solar cells(NF-OSCs). In addition, the review also points out challenges and provides useful guidance regarding side chain regulation for Y-series NFAs.

关键词： organic solar cell Y-series non-fullerene acceptors side chain engineering

维普期刊数据库

Effect of streamlined nose length on aerodynamic performance of high-speed train with a speed of 400 km/h

在线全文

学校读者我要写书评

暂无评论

Journal of zhejiang University-Science A(Applied Physics & Engineering) 2024年第7期25卷 525-540页

作者： Nianxun li tian li zhiyuan DAI Deng QIN Jiye zh.ng State Key Laboratory of Rail Transit Vehicle System Southwest Jiaotong UniversityChengdu 610031China

The streamlined nose length(SNL)plays a crucial role in determining the aerodynamic performance of high-speed *** appropriate SNL can not only effectively reduce the magnitude of aerodynamic drag and lift forces,but also improve the performance of the high-speed train in tunnel passing and crosswind *** this study,a numerical simulation of the aerodynamic performance of high-speed trains at a speed of 400 km/h,with varying SNLs,is conducted using the k-ωshear stress transport(SST)turbulence *** different SNLs include 6.0,7.0,8.0,9.0,9.8,12.0,15.0,and 18.0 *** order to validate the accuracy of the numerical simulation,its results are compared with wind tunnel test data obtained from the *** simulation is carried out using compressible and incompressible gases to determine the effect of gas compressibility on *** impact of SNL on the aerodynamic performance of the trains is analyzed in terms of aerodynamic forces,velocity,and pressure *** comparison to the original train,the train with a 6.0 m SNL experienced a 10.8%increase in overall aerodynamic ***,the lift forces on the head and tail cars increased by 35.7%and 75.5%,*** the other hand,the train with an 18.0 m SNL exhibited a 16.5%decrease in aerodynamic ***,the lift forces on the head and tail cars decreased by 21.9%and 49.7%,*** aerodynamic drag force of the entire train varies linearly with the SNL,while the aerodynamic lift of the tail car follows a quadratic function in relation to the SNL.

关键词： Streamlined nose length(SNL) High-speed train Aerodynamic performance Numerical simulation Flow structures

Parsing Objects at a Finer Granularity: A Survey

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Machine Intelligence Research 2024年第3期21卷 431-451页

作者： Yifan zhao Jia li Yonghong tian School of Computer Science Peking UniversityBeijing100871China State Key Laboratory of Virtual Reality Technology and Systems School of Computer Science and EngineeringBeihang UniversityBeijing100191China

Fine-grained visual parsing, including fine-grained part segmentation and fine-grained object recognition, has attracted considerable critical attention due to its importance in many real-world applications, e.g., agriculture, remote sensing, and space technologies. Predominant research efforts tackle these fine-grained sub-tasks following different paradigms, while the inherent relations between these tasks are neglected. Moreover, given most of the research remains fragmented, we conduct an in-depth study of the advanced work from a new perspective of learning the part relationship. In this perspective, we first consolidate recent research and benchmark syntheses with new taxonomies. Based on this consolidation, we revisit the universal challenges in fine-grained part segmentation and recognition tasks and propose new solutions by part relationship learning for these important challenges. Furthermore, we conclude several promising lines of research in fine-grained visual parsing for future research.

关键词： Finer granularity visual parsing part segmentation fine-grained object recognition part relationship

Forced boiling of nonazeotropic immiscible mixture in a supercapillary microchannel array for ultra-high heat flux removal with chip junction temperature below 85℃

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Science China(Technological Sciences) 2024年第5期67卷 1364-1380页

作者： SUN Bo BAO YuChen tian Tong li Ji School of Engineering Science University of Chinese Academy of SciencesBeijing100049China Laboratory of Advanced Thermal Management Technologies School of Engineering ScienceUniversity of Chinese Academy of SciencesBeijing100049China

In this study,a structure-optimized two-phase microchannel heat sink with sintered submicron nucleation sites was developed and *** copper-based microchannels had a rectangular cross-section with an equivalent hydraulic diameter of 222μ*** subcooled flow boiling characteristics were comprehensively compared between pure HFE-7100 and a non-azeotropic,immiscible binary mixture of HFE-7100 and water,considering heating areas of 1 and 5 cm^(2).The total heating power input to the test section were 100–1500 and 250–3000 W for a 1 and 5 cm^(2)heat source,respectively,with a flow rate ranging from 50 to150 L/*** to pure HFE-7100,the non-azeotropic immiscible binary mixture of HFE-7100/water in the sintered porous microchannels exhibited a much higher overall heat transfer coefficient and lower power *** maintain the junction temperature of a high power electronic chip below 85℃,the proposed supercapillary microchannel heat sink could effectively dissipate the heat flux of 1275 W/cm^(2)over 1 cm^(2)heat source and 500 W/cm^(2)over 5 cm^(2)heat *** addition,the volume ratio of the binary mixture strongly influence the two-phase flow heat transfer *** optimal volume ratio exist in terms of the thermal resistance–pumping power minimization(HFE-7100:water=2:8 is recommended in this study).The findings of this investigation on the flow boiling properties of non-azeotropic immiscible mixtures help fill a gap in the related field.

关键词： microchannel sintered powder coating submicron nucleation cavities nonazeotropic immiscible ultra-high heat flux

维普期刊数据库

A new integrated model of deformation resistance and its application in prediction of rolling force of a thick plate

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research International 2024年第4期31卷 882-893页

作者： Shun-hu zh.ng Yan li li-zhi Che Wen-hao tian Shagang School of Iron and Steel Soochow UniversitySuzhou 215021JiangsuChina

The prediction accuracy of existing models of the rolling force of a thick plate is always very *** address this problem,a high-precision genetic algorithm-backpropagation network(GA-BP)model of deformation resistance was built,and its integration with the traditional fitted model was further ***,a novel rolling force model was obtained by embedding the integration model of deformation resistance in the original model of rolling *** to this research idea,the industrial data are normalized at *** this basis,the interactions among the process parameters were disclosed through the variance analysis,and then described by various virtual *** factors are set as part of input ***,the optimal structure of the GA-BP model of deformation resistance was determined and an integration model of deformation resistance was ***,a novel rolling force model is obtained by substituting the traditional fitted deformation resistance into the Sims model with the integration model of the deformation *** results proves that the introduction of virtual factors can increase the hit rate of±5%from 75.8%to 78%and can reduce the root mean square error from 4.72%to 4.48%.Besides,it is found that the mean relative error of the traditional fitted deformation resistance is 0.142,while that of the modified deformation resistance is only *** addition,the mean relative error in the original rolling force model is 0.145,while that of the present model is only 0.03.

关键词： Integration model-Deformation resistance Variance analysis Virtual factor Genetic algorithm-backpropagation network model

CO_(2)flooding in shale oil reservoir with radial borehole fracturing for CO_(2)storage and enhanced oil recovery

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Petroleum Science 2024年第1期21卷 519-534页

作者： Jia-Cheng Dai tian-Yu Wang Jin-Tao Weng Kang-Jian tian li-Ying zhu Gen-Sheng li State Key Laboratory of Petroleum Resources and Prospecting China University of PetroleumBeijing102249China China National Oil and Gas Exploration and Development Company limited Beijing100034China

This study introduces a novel method integrating CO_(2)flooding with radial borehole fracturing for enhanced oil recovery and CO_(2)underground storage,a solution to the limited vertical stimulation reservoir volume in horizontal well fracturing.A numerical model is established to investigate the production rate,reservoir pressure field,and CO_(2)saturation distribution corresponding to changing time of CO_(2)flooding with radial borehole fracturing.A sensitivity analysis on the influence of CO_(2)injection location,layer spacing,pressure difference,borehole number,and hydraulic fractures on oil production and CO_(2)storage is *** CO_(2)flooding process is divided into four *** in layer spacing will significantly improve oil production rate and gas storage ***,serious gas channeling can occur when the spacing is lower than 20 *** the pressure difference between the producer and injector,the borehole number,the hydraulic fracture height,and the fracture width can also increase the oil production rate and gas storage *** analysis shows that layer spacing and fracture height greatly influence gas storage and oil *** outcomes are expected to provide a theoretical basis for the efficient development of shale oil reservoirs in the vertical direction.

关键词： Shale oil Radial borehole fracturing Embedded discrete fracture model Enhanced oil recovery Carbon storage

维普期刊数据库

Force-position collaborative optimization of rope-driven snake manipulator for capturing non-cooperative space targets

在线全文

学校读者我要写书评

暂无评论

CHINESE JOURNAL OF AERONAUTICS 2024年第9期37卷 369-384页

作者： li, Xiaofeng tian, Jian Wei, Cheng Cao, Xibin Harbin Inst Technol Sch Astronaut Harbin 150001 Peoples R China China Acad Space Technol Beijing Inst Spacecraft Syst Engn Beijing 100094 Peoples R China

With the rapid development of space activities, non-cooperative space targets increase swiftly, such as failed satellites and upper stages, threating normal spacecrafts seriously. As there are some problems in the capture process, such as excessive collision and fast tumbling of targets, manipulator with redundant Degrees of Freedom (DOFs) can be used to improve the compliance and therefore solve these problems. The Rope-Driven Snake Manipulator (RDSM) is a combination of hyper-redundant DOFs and better compliance, and therefore it is suitable for capturing mission. In this paper, a snake manipulator mechanism is designed, and the complete kinematic model and system dynamic model considering RDSM, target and contact is established. Then, to obtain the configuration of joint with hyper-redundant DOFs, an improved motion dexterity index is proposed as the joint motion optimization target. Besides, the force-position collaborative optimization index is designed to adjust active stiffness, and the impedance control method based on the modified index is used to capture the space target. Finally, the proposed force-position collaborative optimization method is verified by virtual prototype co-simulation. The results demonstrate that based on the proposed method, the collision force is reduced by about 25% compared to normal impedance control, showing higher safety. (c) 2024 Production and hosting by Elsevier Ltd. on behalf of Chinese Society of Aeronautics and Astronautics. This is an open access article under the CC BY-NC-ND license (http://***/ licenses/by-nc-nd/4.0/).

关键词： Capturing non-cooperative space targets Rope-driven snake manipu- lator Force-position collaborative optimization Redundant degrees of free- dom Active stiffness adjustment DUAL-ARM SPACE IMPEDANCE CONTROL ROBOT DEXTERITY INDEX

Conceptual design and configurations selection of S/H-UAVs based on Q-rung dual hesitant double layer FQFD

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

CHINESE JOURNAL OF AERONAUTICS 2024年第9期37卷 193-205页

作者： Yang, Dun liu, li Bai, Wencan tian, Weiyong Beijing Inst Technol Sch Aerosp Engn Beijing 100081 Peoples R China

For the conceptual design phase of Unmanned Aerial Vehicles (UAVs), a process for conceptual design and configuration selection of Solar/Hydrogen powered UAVs (S/H-UAVs) is proposed. The design requirements of S/H-UAVs were analyzed firstly. The proposed process used Fuzzy Quality Function Deployment (FQFD) to establish logical and quantitative standards. Moreover, in order to appropriately describe the hesitancy of experts while making decision, it used Q-Rung Dual Hesitant Fuzzy Sets (QRDHFS) to score the correlationships. In addition, a decisionmaking framework is proposed to perform a logical selection of typical layouts based on defuzzification method and Technique for Order Preference by Similarity to the Ideal Solution (TOPSIS). The present process has been applied for S/H-UAVs. The resulting set of design requirements consists of three categories: Mission Requirements (MRs), Engineering Characteristics (ECs) and Technical Indicators (TIs). Four typical layouts of S/H-UAVs were sorted and determined. The performance of four typical layouts were evaluated and the Strut-Braced Wing (SBW) with external hydrogen storage was selected as the best layout for S/H-UAVs. (c) 2024 Production and hosting by Elsevier Ltd. on behalf of Chinese Society of Aeronautics and Astronautics.

关键词： Hybrid powered UAV Conceptual design Strut-braced wing Hybrid powered UAV Conceptual design Q-Rung Dual Hesitant Fuzzy Set(QRDHFS) Quality function deployment Strut-braced wing FUZZY REQUIREMENTS SYSTEM

Additives strategies to improving cycling stability of li metal batteries by modifying electrode electrolyte interphases

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Progress in Natural Science:Materials International 2024年第2期34卷 338-344页

作者： Yuan li Pengfei Huang Chunyu Cui Xiaoyuan Ma li Chen Zekun li linhai li Yuhong tian School of Biological and Chemical Engineering Guangxi University of Science and Technology School of College of Chemistry and Chemical Engineering Hunan University Isky Future Energy Institute

li metal batteries（LMBs） have attracted much attention due to the ultra-high theoretical capacity of the li metal anode（LMA）.However,the uncontrollable dendrites growth and low coulombic efficiency hinder their practical ***,we explore 3,5-difluoropyridine（2F-BD） as a novel electrolyte additive to enable highperformance *** 2F-BD additive participates in and modifies the solvation structure of li ions by reducing the coordinated number of PF6-at the electrode surface,leading to the formation of a liF and li3N-rich solid electrolyte interphase（SEI）.The liF component increases the robustness of SEI and suppresses the formation of li dendrites,while the li3N component facilitates the transportation and reaction kinetics of li *** a result,the li‖li symmetric cell presents a stable cycling performance of up to 500 h at a current density of 1 mA *** coupling with liFePO4cathode,the obtained full cell achieves high specific capacities of 106.06 mA h g-1and 84.98 mA h g-1at 2.55 mA cm-2and 5.10 mA cm-2,respectively,and maintains a high capacity retention of84.0% after 1000 cycles at 0.13 mA cm-2,with an average cycling CE of 99.58%.

关键词： Electrolyte additive li dendrites li metal batteries liF and li3N-Rich electrode-electrolyte interphase liFePO4 cathode