检索结果-南通市图书馆

study of damage behavior and repair effectiveness of patch repaired carbon fiber laminate under quasi-static indentation loading

引用

Defence Technology（防务技术） 2024年第4期34卷 29-41页

作者： Alok kumar Chinmaya kumar sahoo A.Arockiarajan Department of Applied Mechanics Indian Institute of Technology MadrasChennai 600036India

Damage caused due to low-velocity impacts in composites leads to substantial deterioration in their residual strength and eventually provokes structural *** work presents an experimental investigation on the effects of different patch and parent laminate stacking sequences on the enhancement of impact strength of Carbon Fiber Reinforced Polymers(CFRP)composites by utilising the adhesively bonded external patch repair *** evolution study is also performed with the aid of Acoustic Emission(AE).Two different quasi-isotropic configurations were selected for the parent laminate,viz.,[45°/45°/0°/0°]s and[45°/0°/45°/0°]*** static Indentation(QsI)test was performed on both the pristine laminates,and damage areas were detected by using the C-scan inspection *** laminates were repaired by using a single-sided patch of two different configurations,viz.,[45°/45°/45°/45°]and[45°/0°/0°/45°],and employing a circular plug to fill the damaged *** different combinations of repaired laminates with two configurations of each parent and patch laminate were produced,which were further subjected to the QsI *** results reveal the effectiveness of the repair method,as all the repaired laminates show higher impact resistance compared to the respective pristine *** of[45°/0°/0°/45°]configuration when repaired by taking[45°/45°/0°/0°]s and[45°/0°/45°/0°]s as parents exhibited 68%and 73%higher peak loads,respectively,than the respective pristine ***,parent and patch of configuration[45°/0°/45°/0°]s and[45°/0°/0°/45°],respectively,attain the highest peak load,whereas[45°/45°/0°/0°]s and[45°/45°/45°/45°]combinations possess the most gradual decrease in the load.

关键词： Carbon fiber reinforced polymers(CFRP) Quasi-isotropic laminate Quasi static indentation(QsI) Acoustic emission(AE) Composite repair

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Factors influencing farmers’adoption of solar water-pumping systems in Gujarat

引用

Clean Energy 2024年第3期8卷 157-165页

作者： M sathish kumar Y.A.Lad R.s.Pundir International Agribusiness Management Institute Anand Agricultural UniversityAnand388110GujaratIndia Department of HRD&PM International Agribusiness Management InstituteAnand Agricultural UniversityAnand388110GujaratIndia Department of Agribusiness Economics and Policies International Agribusiness Management InstituteAnand Agricultural UniversityAnand388110GujaratIndia

Agriculture has played an important role in the growth of the Indian *** and electricity are essential inputs for agriculture *** produces the third-largest amount of electricity in the world,behind China and the *** an incentive to increase production,most states provide free electricity to *** electricity has decreased groundwater levels and increased electricity *** objective of this study was to find out the factors that influenced farmers to adopt a solar water-pumping system in *** samples were randomly *** study examined the entire state of *** hundred and fifty farmers who adopted solar water-pumping systems were interviewed,including 50 banana farmers,50 cotton farmers and 50 groundnut *** data were collected through an *** adoption of solar water-pumping systems by farmers was identified using factor *** software was used to analyse the data *** this study,only two factors contributed to the variance of 59.469%.The adoption of solar water pumps by farmers was influenced by government policy and economic *** economic benefit variance of 33.20%was found,while a government policy variance was 26.27%.A solar water-pumping system has low initial costs,flexible credit policies motivate adoption,solar water-pumping systems can save electricity,and maintenance and repair costs are *** policy that includes solar water-pumping systems is motivated by awareness,subsidies for adoption and a fair price to sell energy *** are recommended to adopt a solar water-pumping system in conjunction with a drip irrigation system to receive additional *** successful scheme will be recommended to other states in India for implementation.

关键词： solar water-pumping system factor analysis banana cotton groundnut famers

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acoustical properties of a 3D printed honeycomb structure filled with nanofillers:Experimental analysis and optimization for emerging applications

引用

Defence Technology（防务技术） 2024年第5期35卷 248-258页

作者： Jeyanthi subramanian Vinoth kumar selvaraj Rohan singh Ilangovan s Naresh Kakur Ruban Whenish school of Mechanical Engineering Vellore Institute of TechnologyChennai600127Tamil NaduIndia Department of Mechanical Engineering SRM Institute of Science and TechnologyRamapuramChennai600089India Department of Chemical Engineering and Materials science University of Southern CaliforniaLos Angeles90089USA Advanced Materials Research Centre Technology Innovation InstituteAbu Dhabi9639UAE Center for Biomaterials Cellular and Molecular TheranosticsVellore Institute of TechnologyVellore632014Tamil NaduIndia

The novelty of this research lies in the successful fabrication of a 3D-printed honeycomb structure filled with nanofillers for acoustic properties,utilizing an impedance tube setup in accordance with AsTM standard E *** Creality Ender-3,a 3D printer,was used for printing the honeycomb structures,and polylactic acid(PLA)material was employed for their *** organic,inorganic,and polymeric compounds within the composites were identified using fourier transformation infrared(FTIR)*** structure and homogeneity of the samples were examined using a field emission scanning electron microscope(FEsEM).To determine the sound absorption coefficient of the 3D printed honeycomb structure,numerous samples were systematically developed using central composite design(CCD)and analysed using response surface methodology(RsM).The RsM mathematical model was established to predict the optimum values of each factor and noise reduction coefficient(NRC).The optimum values for an NRC of 0.377 were found to be 1.116 wt% carbon black,1.025 wt% aluminium powder,and 3.151 mm distance between parallel ***,the results demonstrate that a 3Dprinted honeycomb structure filled with nanofillers is an excellent material that can be utilized in various fields,including defence and aviation,where lightweight and acoustic properties are of great importance.

关键词： 3D printing Honeycomb structure Acoustics Field emission scanning electron microscope Response surface methodology

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

On the existence and stability of traversable wormhole solutions with novel shapefunctions in the framework of F(R,L_(m))gravity

引用

Communications in Theoretical Physics 2024年第5期76卷 114-127页

作者： sourav Chaudhary Jitendra kumar s K Maurya sweeti Kiroriwal Abdul Aziz Department of Mathematics Central University of HaryanaJant-PaliMahendergarhIndia Department of Mathematical and Physical sciences College of Arts and ScienceUniversity of NizwaP.O.Box 33Nizwa 616Oman

In this work,we have explored wormhole(WH)solutions in F(R,L_(m))gravity by assuming the Morris-Thorne WH metric and F(R,Lm)=R/2+(1+γR)L_(m),whereγis the free model *** determined the WH solutions by utilizing two newly developed shape functions(sF)that satisfy all basic conditions for a WH’s physical *** also observe that the null energy condition(NEC)behaves ***,for both models,we use the volume integral quantifier(VIQ)and Tolman-Oppenheimer-Volkoff(TOV)equation to determine how much exotic matter is needed near the WH throat and the stability of the *** extensive detailed discussions of the matter components have been done via graphical *** obtained WH geometries meet the physically acceptable conditions for a stable wormhole.

关键词： energy conditions wormhole exotic matter F(R L_(m))gravity

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

surface Modification Aspects for Improving Biomedical Properties in Implants:A Review

引用

Acta Metallurgica sinica(English Letters) 2024年第2期37卷 213-241页

作者： J.sharath kumar Rakesh kumar Rajeev Verma Industrial and Production Department Dr B R Ambedkar National Institute of Technology JalandharJalandharPunjab144008India

The primary focus during surgery is to ensure successful implantation by achieving long-term and stable fixation of *** surgery is now more focused on the development of novel biomaterials intended to improve implant *** obtain a better understanding of metal implants,this article investigated the causes of material failures in certain cases and analysed a few case *** interaction between the implant and bone tissue was a crucial aspect of successful implantation,and this study explored the factors influencing this interaction as well as ways to improve *** modern approaches used for modifying implant surfaces were systematically illustrated and briefly *** spray coatings were often favoured because of their wide range of coating materials,but other substantial surface modifications(such as friction stir processing and laser surface texturing)were also used for a selection of ***,implant surfaces with desirable features,such as biocompatibility,antibacterial properties,corrosion resistance,and wear resistance,were essential for optimising implant *** systematic review's main aim is to provide exhaustive reference information and a broad overview to advance the production and design of orthopaedic implants.

关键词： Biomaterials surface treatments Thermal spray coatings Antibacterial Biocompatibility Corrosion resistance Wear resistance

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Nano/Micro-structural supramolecular Biopolymers: Innovative Networks with the Boundless Potential in sustainable Agriculture

引用

Nano-Micro Letters 2024年第8期16卷 79-101页

作者： Roohallah saberi Riseh Mohadeseh Hassanisaadi Masoumeh Vatankhah Rajender s.Varma Vijay kumar Thakur Department of Plant Protection Faculty of AgricultureVali-e-Asr University of RafsanjanImam Khomeini SquareRafsanjan ***Iran Centre of Excellence for Research in sustainable Chemistry Department of ChemistryFederal University of São CarlosSão CarlosSP 13565‑905Brazil Biorefining and Advanced Materials Research Center Scotland’s Rural Collage(SRUC)Edinburgh EH93JGUK

sustainable agriculture plays a crucial role in meeting the growing global demand for food while minimizing adverse environmental impacts from the overuse of synthetic pesticides and conventional *** this context,renewable biopolymers being more sustainable offer a viable solution to improve agricultural sustainability and ***/micro-structural supramolecular biopolymers are among these innovative biopolymers that are much sought after for their unique *** biomaterials have complex hierarchical structures,great stability,adjustable mechanical strength,stimuli-responsiveness,and self-healing *** molecules may be added to their flexible structure,for enabling novel agricultural *** overview scrutinizes how nano/micro-structural supramolecular biopolymers may radically alter farming practices and solve lingering problems in agricultural sector namely improve agricultural production,soil health,and resource *** bioactive ingredient released from biopolymers allows the tailored administration of agrochemicals,bioactive agents,and biostimulators as they enhance nutrient absorption,moisture retention,and root ***/micro-structural supramolecular biopolymers may protect crops by appending antimicrobials and biosensing entities while their eco-friendliness supports sustainable *** their potential,further studies are warranted to understand and optimize their usage in agricultural *** effort seeks to bridge the knowledge gap by investigating their applications,challenges,and future prospects in the agricultural *** experimental investigations and theoretical modeling,this overview aims to provide valuable insights into the practical implementation and optimization of supramolecular biopolymers in sustainable agriculture,ultimately contributing to the development of innovative and eco-friendly solutions to enhance agricultural productivity while minimizing envir

关键词： supramolecular Biopolymers sustainable agriculture Nanotechnology

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

structural,morphological,optical and antibacterial performances of rare earth(sm)-doped ZnO nanorods

引用

Journal of Rare Earths 2024年第11期42卷 2119-2127页

作者： A.Ravi J.samuel s.sahaya Jude Dhas s.Usharani Turibius simon D.senthil kumar s.K.Jasmin Vijitha A.sivakumar Raju suresh kumar C.s.Biju Department of Physics University College of Engineering Department of Physics and Research Centre Malankara Catholic College Manonmaniam sundaranar University saveetha school of Engineering Saveetha Institute of Medical and Technical SciencesSaveetha University Department of Chemistry S.I.V.E.T College Department of Biotechnology Vivekanandha College of Arts and Science for Woman (Autonomous) Department of Physics Vel Tech Rangarajan Dr.Sagunthala R & D Institute of Science and Technology Department of Physics & Research Centre Muslim Arts College Key Laboratory of High-temperature and High-pressure study of the Earth's Interior Institute of GeochemistryChinese Academy of Sciences Department of Chemistry College of ScienceKing Saud University Department of Physics St. Alphonsa College of Arts and Science

The significant rise of ultra-violet（UV） radiation and pathogenic infectious bacteria poses a serious threat to global *** researchers' interests are attracted by novel materials with strong UVblocking ability,antibacterial activity and low toxicity to other *** this case,a simple wet chemical method with different annealing temperatures（400,500,and 600℃） was employed to create highly effective rare earth（sm）-doped ZnO ***（101） plane of wurtzite ZnO shifts towards a lower angle with increasing annealing temperature,according to the X-ray diffraction（XRD） study findings,which additionally establishes the consequence of lattice *** of doublet peaks of sm 3d(sm 3d5/2and sm 3d3/2) in the X-ray photoelectron spectroscopy（XPs） spectrum clearly validates the substitution of sm3+ions in the 500℃-annealed *** 500℃-annealed nanorods exhibit combined performances of the wide band gap,improved UV absorbance,and vivid green luminescent emission（563 nm）.Additio nally,the nanorods have favorable UV-blocking execution of 96% for UVA at 360 nm,92% for UVB at 320 nm,and 57% for UVC at 225 nm,which is greater than the majority of ZnO-related materials that have been reported up to this *** doping is also appropriate for improving bacterial inhibition against the two studied strains（Escherichia coli and staphylococcus aureus）,in addition to the intriguing features discussed ***,with maximum inhibition zone diameters of 20±0.72 and 18±0.57 mm,respectively,these nanorods exhibit high inhibitory action against *** and *** bacterial *** rare earth-doped material developed during the current experiment,which was annealed at 500℃,could potentially serve as an effective replacement for UV-blocking and antibacterial material,especially for biomedical applications.

关键词： Bacterial inhibition Metal oxide Rare earth doping UV-shielding Wet chemical method

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

structural build-up model for three-dimensional concrete printing based on kinetics theory

引用

Frontiers of structural and Civil Engineering 2024年第7期18卷 998-1014页

作者： Prabhat Ranjan PREM P.s.AMBILY shankar kumar Greeshma GIRIDHAR Dengwu JIAO Advanced Materials Laboratory CSIR-Structural Engineering Research CentreChennai 600113India Department of Architecture and Civil Engineering City University of Hong KongHong Kong 999077China

The thixotropic structural build-up is crucial in extrusion-based three-dimensional(3D)concrete *** paper uses a theoretical model to predict the evolution of static and dynamic yield stress for printed *** model employs a structural kinetics framework to create a time-independent constitutive link between shear stress and shear *** model considers flocculation,deflocculation,and chemical hydration to anticipate structural *** reversible and irreversible contributions that occur throughout the build-up,breakdown,and hydration are defined based on the proposed structural ***,detailed parametric studies are conducted to evaluate the impact of model *** is revealed that the proposed model is in good agreement with the experimental results,and it effectively characterizes the structural build-up of 3D printable concrete.

关键词： structural build-up rheology thixotropy 3D printable concrete kinetics theory ultra high performance concrete

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Efficient Finite Difference WENO scheme for Hyperbolic systems withNon-conservativeProducts

引用

Communications on Applied Mathematics and Computation 2024年第2期6卷 907-962页

作者： Dinshaw s.Balsara Deepak Bhoriya Chi-Wang shu Harish kumar Physics Department University of Notre DameNotre DameUSA ACMs Department University of Notre DameNotre DameUSA Division of Applied Mathematics Brown UniversityProvidenceUSA Department of Mathematics Indian Institute of TechnologyDelhiIndia

Higher order finite difference weighted essentially non-oscillatory(WENO)schemes have been constructed for conservation *** multidimensional problems,they offer a high order accuracy at a fraction of the cost of a finite volume WENO or DG scheme of the comparable *** makes them quite attractive for several science and engineering ***,to the best of our knowledge,such schemes have not been extended to non-linear hyperbolic systems with non-conservative *** this paper,we perform such an extension which improves the domain of the applicability of such *** extension is carried out by writing the scheme in fluctuation *** use the HLLI Riemann solver of Dumbser and Balsara(***.304:275-319,2016)as a building block for carrying out this *** of the use of an HLL building block,the resulting scheme has a proper supersonic *** use of anti-diffusive fluxes ensures that stationary discontinuities can be preserved by the scheme,thus expanding its domain of the *** new finite difference WENO formulation uses the same WENO reconstruction that was used in classical versions,making it very easy for users to transition over to the present *** conservation laws,the new finite difference WENO is shown to perform as well as the classical version of finite difference WENO,with two major advantages:(i)It can capture jumps in stationary linearly degenerate wave families exactly.(i)It only requires the reconstruction to be applied *** examples from hyperbolic PDE systems with non-conservative products are shown which indicate that the scheme works and achieves its design order of the accuracy for smooth multidimensional *** Riemann problems and several novel multidimensional problems that are drawn from compressible Baer-Nunziato multiphase flow,multiphase debris flow and twolayer shallow water equations are also shown to document the robustness of the *** some

关键词： Hyperbolic PDEs Numerical schemes Non-conservative products stiff source terms Finite difference WENO

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A secure Framework for WsN-IoT Using Deep Learning for Enhanced Intrusion Detection

引用

Computers, Materials and Continua 2024年第1期81卷 471-501页

作者： kumar C.O. Gajendran s. Marappan s. Zakariah M. Almazyad A.s. school of Computer science & Engineering Vellore Institute of Technology Chennai Campus Chennai 600127 India school of Electronics & Engineering Vellore Institute of Technology Chennai Campus Chennai 600127 India Department of Computer sciences and Engineering College of Applied Science King Saud University Riyadh 11543 Saudi Arabia Department of Computer Engineering College of Computer and Information Sciences King Saud University Riyadh 11543 Saudi Arabia

The security of the wireless sensor network-Internet of Things (WsN-IoT) network is more challenging due to its randomness and self-organized nature. Intrusion detection is one of the key methodologies utilized to ensure the security of the network. Conventional intrusion detection mechanisms have issues such as higher misclassification rates, increased model complexity, insignificant feature extraction, increased training time, increased run time complexity, computation overhead, failure to identify new attacks, increased energy consumption, and a variety of other factors that limit the performance of the intrusion system model. In this research a security framework for WsN-IoT, through a deep learning technique is introduced using Modified Fuzzy-Adaptive DenseNet (MF_AdaDenseNet) and is benchmarked with datasets like NsL-KDD, UNsWNB15, CIDDs-001, Edge IIoT, Bot IoT. In this, the optimal feature selection using Capturing Dingo Optimization (CDO) is devised to acquire relevant features by removing redundant features. The proposed MF_AdaDenseNet intrusion detection model offers significant benefits by utilizing optimal feature selection with the CDO algorithm. This results in enhanced Detection Capacity with minimal computation complexity, as well as a reduction in False Alarm Rate (FAR) due to the consideration of classification error in the fitness estimation. As a result, the combined CDO-based feature selection and MF_AdaDenseNet intrusion detection mechanism outperform other state-of-the-art techniques, achieving maximal Detection Capacity, precision, recall, and F-Measure of 99.46%, 99.54%, 99.91%, and 99.68%, respectively, along with minimal FAR and Mean Absolute Error (MAE) of 0.9% and 0.11. © 2024 The Authors.

关键词： accuracy Deep learning false alarm rate feature selection fuzzy rules intrusion detection wireless sensor networks

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：