检索结果-南通市图书馆

Static recrystallization behaviors and mechanisms of 7Mo super-austenitic stainless steel with undissolved sigma precipitates during double-stage hot deformation

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2024年第2期31卷 475-487页

作者： Shi-guang xu Jin-shan He Run-ze Zhang Fu-cheng Zhang Xi-tao Wang Collaborative Innovation Center of Steel Technology University of Science and Technology BeijingBeijing100083China State Key Laboratory of Metastable Materials Science and Technology Yanshan UniversityQinhuangdao066004HebeiChina Shandong Provincial Key Laboratory for High Strength Lightweight Metallic Materials Advanced Materials InstituteQilu University of Technology(Shandong Academy of Science)Jinan250353ShandongChina

Static recrystallization(SRX)behaviors and corresponding recrystallization mechanisms of 7Mo super-austenitic stainless steel were studied under different deformation *** order of influence of deformation parameters on static recrystallization behaviors,from high to low,is followed by temperature,first-stage strain and strain ***,the effect of holding time on static recrystallization behaviors is significantly controlled by *** addition,with the increase in temperature from 1000 to 1200°C,the static recrystallization mechanism evolves from discontinuous static recrystallization and continuous static recrystallization(cSRX)to metadynamic recrystallization and cSRX,and finally to *** cSRX exists at all *** is because high stacking fault energy(56 mJ m−2)promotes the movement of dislocations,making the deformation mechanism of this steel is dominated by planar slip of *** undissolved sigma precipitates promote static recrystallization through particle-stimulated ***,small strain-induced precipitates at grain boundaries hinder the nucleation of conventional SRX and the growth of recrystallized grains,while the hindering effect decreases with the increase in temperature.

关键词： 7Mo super-austenitic stainless steel Double-stage hot deformation Conventional static recrystallization Metadynamic recrystallization Strain-induced precipitation

Gluing Affine Vortices

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Mathematica Sinica,English Series 2024年第1期40卷 250-312页

作者： guang Bo xu Department of Mathematics Rutgers UniversityHill Center-Busch Campus 110 Frelinghuysen RoadPiscatawayNJ 08854-8019USA

We provide an analytical construction of the gluing map for stable affine vortices over the upper half plane with the Lagrangian boundary *** result is a necessary ingredient in studies of the relation between gauged ... 详细信息

关键词： Affine vortices gauged linear sigma model adiabatic limit symplectic reduction

B cell development and antibody responses in human immune system mice:current status and future perspective

在线全文

学校读者我要写书评

暂无评论

Science China(Life Sciences) 2024年第4期67卷 645-652页

作者： tao Zhang Wentao Liu Yong-guang Yang Key Laboratory of Organ Regeneration&Transplantation of the Ministry of Education The First Hospital of Jilin UniversityChangchun 130061China National-Local Joint Engineering Laboratory of Animal Models for Human Diseases Jilin UniversityChangchun 130061China International Center of Future Science Jilin UniversityChangchun 130061China

Humanized immune system(HIS)mice have been developed and used as a small surrogate model to study human immune function under normal or disease *** variations are found between models,most HIS mice show robust human T cell ***,there has been unsuccessful in constructing HIS mice that produce high-affinity human antibodies,primarily due to defects in terminal B cell differentiation,antibody affinity maturation,and development of primary follicles and germinal *** this review,we elaborate on the current knowledge about and previous attempts to improve human B cell development in HIS mice,and propose a potential strategy for constructing HIS mice with improved humoral immunity by transplantation of human follicular dendritic cells(FDCs)to facilitate the development of secondary follicles.

关键词： humanized immune system mouse humoral immunity germinal center B cell follicular dendritic cell

同方期刊数据库

Beam based alignment using a neural network

在线全文

学校读者我要写书评

暂无评论

Nuclear Science and Techniques 2024年第4期35卷 108-118页

作者： Guan-Liang Wang Ke-Min Chen Si-Wei Wang Zhe Wang tao He Masahito Hosaka guang-Yao Feng Wei xu National Synchrotron Radiation Laboratory University of Science and Technology of ChinaHefei 230029China Diamond Light Source Oxfordshire OX110DEUK

Beams typically do not travel through the magnet centers because of errors in storage *** beam deviating from the quadrupole centers is affected by additional dipole fields due to magnetic field ***-based alignment(BBA)is often performed to determine a golden orbit where the beam circulates around the quadrupole center *** storage rings with many quadrupoles,the conventional BBA procedure is time-consuming,particularly in the commissioning phase,because of the necessary iterative *** addition,the conventional BBA method can be affected by strong coupling and the nonlinearity of the storage ring *** this study,a novel method based on a neural network was proposed to determine the golden orbit in a much shorter time with reasonable *** golden orbit can be used directly for operation or adopted as a starting point for conventional *** method was demonstrated in the HLS-II storage ring for the first time through simulations and online *** results of the experiments showed that the golden orbit obtained using this new method was consistent with that obtained using the conventional *** development of this new method and the corresponding experiments are reported in this paper.

关键词： Golden orbit Beam-based alignment Neural network Storage ring

Super-high bed sintering for iron ores:problems ascertainment

在线全文

学校读者我要写书评

暂无评论

Journal of Iron and Steel Research(International) 2024年第5期31卷 1063-1070页

作者： Liang-ping xu Hui-bo Liu Yu-chao Zhao Qiang Zhong Zhong-lin Dong guang-hui Li tao Jiang School of Minerals Processing and Bioengineering Central South UniversityChangsha410083HunanChina

Super-high bed sintering process is an important development direction of iron ore sintering for its lower emission and higher ***,there is a lack of deep understanding of the uneven quality of super-high bed sintering products,and the deterioration of reduction disintegration performance,the thickening of hearth layer and the reduction in energy-saving effect are perplexing enterprises and *** ascertain the problems of super-high bed sintering,ten sintering machines with the areas of 265,280,360,550 and 660 m^(2)and bed depth above 900 mm were sampled and *** results showed that problems were mainly shown in the unevenness of chemical composition,macrostructure,mechanical strength and metallurgical *** chemical composition exhibits severe segregation in both horizontal and vertical directions,with basicity segregation reaching as high as *** uneven macrostructure of sinter is reflected in a 10%difference in porosity and mechanical strength increase in 16%–19%along the vertical *** reducibility and reduction disintegration performance gradually deteriorate along the bed depth,with a difference of 10.5%in reducibility and 7.3%in RDI−0.5 mm(reduction disintegration index of sinter with size smaller than 0.5 mm).

关键词： Super-high bed sintering Uneven sinter performance Segregation Agglomeration Iron ore

Recent development of three-dimension printed graphene oxide and MXene-based energy storage devices

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Tungsten 2024年第1期6卷 196-211页

作者： Liang-Hao Yu Xin tao Shang-Ru Feng Jin-tao Liu Lin-Lin Zhang guang-Zhen Zhao guang Zhu Key Laboratory of Spin Electron and Nanomaterials of Anhui Higher Education Institutes Suzhou UniversitySuzhou 234000China Key Laboratory of Leather of Zhejiang Province College of Chemistry and Materials EngineeringWenzhou UniversityWenzhou 325035China

The research for three-dimension(3D)printing carbon and carbide energy storage devices has attracted widespread exploration *** designable in structure and materials,graphene oxide(GO)and MXene accompanied with a direct ink writing exhibit a promising prospect for constructing high areal and volume energy density *** review not only summarizes the recent advances in 3D printing energy storage devices including printing methods,ink rheological properties,and different energy storage systems,but also discusses the printing methods related to energy *** addition,the binder or additive free of two-dimensional carbide materials is quite important for the present electrochemical energy storage devices,which also are presented.

关键词： 3D printing Two-dimensional materials Energy storage device Ink theological MXene

The genesis and resource potential of gold deposits in the Liaodong Peninsula

在线全文

学校读者我要写书评

暂无评论

Science China Earth Sciences 2024年第3期67卷 657-672页

作者： Rixiang ZHU Jin-Hui YANG Gongwen WANG Qingdong ZENG Guoqiang xuE tao xu Xinghui LI Peng ZHANG Da LEI guang ZHU State Key Laboratory of Lithospheric Evolution Institute of Geology and GeophysicsChinese Academy of SciencesBeijing 100029China School of Earth Sciences and Resources China University of GeosciencesBeijing 100083China Shenyang Center China Geological SurveyShenyang 110034China School of Resources and Environmental Engineering Hefei University of TechnologyHefei 230009China

Plenty of gold deposits related to Late Mesozoic craton destruction are widely distributed in eastern North China Craton. However, significant differences in research degrees, ore-forming characteristics, and proven reserves exist among different regions in the North China Craton. The Liaodong Peninsula has similar regional geological characteristics to those of the Jiaodong Peninsula, with both experiencing craton destruction during Late Mesozoic, but the two areas have substantial differences in terms of gold mineralization and the proven gold resources. Based on regional geology, Mesozoic magmatictectonic evolution and ore geology, combined with integrated geophysical exploration and big data AI resource prediction, in this paper, we propose that the ore-forming materials of Late Mesozoic gold deposits in Liaodong were mainly originated from mantle-derived melts and/or fluids induced by craton destruction. The gold deposits were primarily controlled by NE-NNEtrending faults, mainly classified as fracture-controlled altered rock-type and sulfide-bearing quartz vein-type. Moreover, our study predicts that the Yalu River fault zone and its related secondary faults, as well as the periphery and deeper parts of known goldfields, are the important regions for future gold resource exploration. The Yalu River metallogenic belt has an enormous potential for gold resources, and the Liaodong Peninsula has a potential to add thousands of tons of gold resources.

关键词： Liaodong Peninsula Gold deposit Integrated geophysical exploration Prospecting potential Direction for prospecting breakthroughs

同方期刊数据库

Vascularization ability of glioma stem cells in different three-dimensional microenvironments

在线全文

学校读者我要写书评

暂无评论

Regenerative Biomaterials 2024年第1期3卷 34-43页

作者： xuanzhi Wang tao xu Chaoshi Niu Department of Neurosurgery The First Affliated Hospital of USTCDivision of Life Sciences and MedicineUniversity of Science and Technology of ChinaHefeiAnhui230036China Department of Neurosurgery Sichuan Provincial People's HospitalUniversity of Electronic Science and Technology of ChinaChengdu 610072People's Republic of China Center for Bio-intelligent Manufacturing and Living Matter Bioprinting Research Institute of Tsinghua University in ShenzhenTsinghua UniversityShenzhen 518057People's Republicof China

Glioblastoma(GBM)is among the most common and aggressive adult central nervous system *** prominent charac-teristic of GBM is the presence of abnormal microvessels.A significant correlation between angiogenesis and prognosis has been *** reconstructing this neovascula-rization and tumor microenvironment through personalized in vitro disease models presents a significant ***,it is crucial to develop new anti-angiogenic therapies for *** this study,3D bioprinted glioma stem cell(GSC)-laden hydrogel scaffolds,hybrid Gsc hydrogels and ceil-free hydrogel scaffolds were manufactured to investigate the vas-cularization ability of GsCs in varying 3D microenvironments.

关键词： 3D bioprinting xenograft tumors GSC-laden hydrogel scaffold glioblastoma angiogenesis

Four-channel catalytic micro-reactor based on alumina hollow fiber membrane for efficient catalytic oxidation of CO

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Journal of Chemical Engineering 2024年第7期71卷 140-147页

作者： Baichuan xu Bin Wang tao Li Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education School of Energy and EnvironmentSoutheast UniversityNanjing 211100China

The traditional automotive catalytic converter using commercial ceramic honeycomb carriers has many problems such as high back pressure,low engine efficiency,and high usage of precious *** study proposes a four-channel catalytic micro-reactor based on alumina hollow fiber membrane,which uses phase inversion method for structural molding and *** to the advantages of its carrier,it can achieve lower ignition temperature under low noble metal *** Pd/CeO_(2) at a loading rate of 2.3%(mass),the result showed that the reaction ignition temperature is even less than 160℃,which is more than 90℃ lower than the data of commercial ceramic substrates under similar catalyst loading and airspeed *** technology in turn significantly reduces the energy consumption of the *** stability tests were conducted under constant conditions for 1000 h,which proved that this catalytic converter has high catalytic efficiency and stability,providing prospects for the design of innovative catalytic converters in the future.

关键词： Catalytic converter Precious metal catalyst Phase inversion method Hollow fiber membrane CO oxidation