检索结果-南通市图书馆

towards tailoring basal texture of rolled Mg alloy sheet by recrystallization for high room-temperature formability: A review

引用

Journal of Magnesium and Alloys 2023年第11期11卷 3992-4010页

作者： t.nakata S.Kamado Nagaoka University of technology 1603-1KamitomiokaNagaoka 940-2188Japan

Room-temperature(Rt) formability is a key factor to broaden the applications of rolled Mg alloy sheets in the industry. However, rolled Mg alloy sheets generally form strong basal texture, where the(0001) poles align parallel to the normal direction(ND). this hinders the activation of(0001) [1120] basal slip, limiting the Rt formability. therefore, texture weakening, i.e., the inclination of the(0001) poles from the ND, plays an important role to improve the Rt formability. Recrystallization is crucial to control the textural development in Mg,and currently, the texture weakening is commonly achieved using static recrystallization(SRX). However, the type of slipping and twinning,which are activated during rolling, affect the textural features after SRX. It is also demonstrated that shear bands and preferential grain growth are important factors to tailor the texture during SRX. Indeed, dynamic recrystallization(DRX) easily occurs during rolling in Mg, which also affects the final rolling texture, while the effect of DRX on the textural formation is not extensively studied for the development of Rt-formable Mg alloy sheets. therefore, the effect of these factors on the textural development in rolled Mg is reviewed in this ***, the ideal microstructure and texture for Rt-formable Mg alloy sheets are still controversial. the Rt-formability includes stretch forming(biaxial tension), bending(plane strain tension), and deep-drawing. In particular, the stretch forming is commonly used to evaluate the Rt-formability of rolled Mg. Although the stretch formability has been improved by recent studies, the further improvement is necessary owing to the relatively low formability of rolled Mg compared with that of rolled Fe and Al. Based on the relationship between the microstructure/texture and stretch formability provided in the literature, the design guidance for high stretch formability is proposed in this review.

关键词： Magnesium alloy Rolling Recrystallization texture Formability

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Origin of extension twinning-mediated static recrystallization and unique parallel alignment of(0001) poles to transverse direction in Mg-3Al-0.4Mn(mass%) alloy sheet

引用

Journal of Magnesium and Alloys 2023年第9期11卷 3200-3213页

作者： t.nakata C.Xu L.Geng S.Kamado Nagaoka University of technology 1603-1KamitomiokaNagaoka 940-2188Japan School of Materials Science and Engineering Harbin Institute of technology Harbin 150001China

the origin of unique parallel alignment of(0001) poles to transverse direction(tD) was investigated using Mg-3Al-0.4Mn(mass%)alloy sheets rolled with different process conditions. When rolling was performed with intermediate reheating, the alloy showed a sluggish static recrystallization(SRX) behavior during post-annealing, facilitating the nucleation and growth of statically recrystallized grains from extension twins. this resulted in the apparent texture component with the parallel alignment of the(0001) poles to the tD, and the sheet exhibited good ductility for both the rolling direction(RD) and tD. In contrast, continuous rolling without intermediate reheating led to the formation of severely deformed regions near double twins. SRX was promoted at such regions, forming a typical basal textural feature with weak RD-split of the(0001) poles. Although extension twins were formed after the continuous rolling, SRX was facilitated at the severely deformed regions with double twins, and the formation of the unique alignment of the(0001) poles to the tD was suppressed. the RD-split texture led to the large elongation to failure along the RD, while it along the tD decreased owing to the narrow distribution of the(0001)poles toward the tD, resulting in the in-plane anisotropy in ductility.

关键词： Magnesium Rolling twinning Static recrystallization texture

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Improvement of strength and ductility synergy in a room-temperature stretch-formable Mg-Al-Mn alloy sheet by twin-roll casting and low-temperature annealing

引用

Journal of Magnesium and Alloys 2022年第4期10卷 1066-1074页

作者： t.nakata C.Xu K.Kaibe Y.Yoshida K.Yoshida S.Kamado Nagaoka University of technology 1603-1KamitomiokaNagaoka 940-2188Japan School of Materials Science and Engineering Harbin Institute of technology Harbin 150001China Sumitomo Electric Industries Ltd.1-1-1 KoyakitaItami 664-0016Japan

Strength and ductility synergy in an Mg-3mass%Al-Mn(AM30)alloy sheet was successfully improved via twin-roll casting and annealing at *** AM30 alloy sheet produced by twin-roll casting,homogenization,hot-rolling,and subsequent annealing at 170℃ for 64 h exhibits a good 0.2%proof stress of 170 MPa and a large elongation to failure of 33.1%along the rolling *** sheet also shows in-plane isotropic tensile properties,and the 0.2%proof stress and elongation to failure along the transverse direction are 176 MPa and 35.5%,*** the sheet produced by direct-chill casting also shows moderate strengths if the annealing condition is same,the direct-chill casting leads to the deteriorated elongation to failure of 23.9%and 30.0%for the rolling and transverse directions,*** well as such excellent tensile properties,a high room-temperature stretch formability with an Index Erichsen value of 8.3 mm could be obtained in the twin-roll cast sheet annealed at 170℃ for 64 *** annealing at a higher temperature further improves the stretch formability;however,this results in the decrease of the tensile *** characterization reveals that the excellent combination of strengths,ductility,and stretch formability in the twin-roll cast sheet annealed at the low-temperature annealing is mainly attributed to the uniform recrystallized microstructure,fine grain size,and circular distribution of(0001)poles away from the normal direction of the sheet.

关键词： Magnesium Rolling tensile property Room temperature formability twinning

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Optimization of Cu content for the development of high-performance t5-treated thixo-cast Al-7Si-0.5Mg-Cu(wt.%)alloy

引用

Journal of Materials Science & technology 2021年第34期93卷 178-190页

作者： K.Yamamoto M.takahashi Y.Kamikubo Y.Sugiura S.Iwasawa t.nakata S.Kamado Nagaoka University of technology NagaokaJapan Asanuma Giken Co. Ltd.HamamatsuJapa Industrial Research Institute of Shizuoka Prefecture ShizuokaJapan

Cu content has been successfully optimized in a thixo-cast and directly aged(t5-treatment)Al-7 Si-0.5 Mg(wt.%)*** after the 0.5%Cu addition,plate-like Al_(2)Cu(θ’)phases,which contribute to high strengths and large plasticity,are *** formation of a large fraction of Cu-containing brittle phases could be suppressed as ***,the Al-7Si-0.5Mg-0.5Cu alloy exhibits high ultimate tensile strength,0.2%proof stress,and elongation to failure of 296 MPa,209 MPa,and 8.8%,*** results in a high quality index similar to that of solution-treated and subsequently aged(t6-treated)Al-7 Si-Mg alloys.A Cu addition over 1.0%further improves the strengths;however,this leads to poor ductility because of the high fraction of Cu-containing brittle phases.

关键词： Al-Si-Mg-Cu alloy thixo-casting t5-treatment Mechanical property Microstructure

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Enhancing strength and creep resistance of Mg-Gd-Y-Zn-Zr alloy by substituting Mn for Zr

引用

Journal of Magnesium and Alloys 2019年第3期7卷 388-399页

作者： C.Xu t.nakata G.H.Fan X.W.Li G.Z.tang S.Kamado School of Materials Science and Engineering Harbin Institute of TechnologyHarbin 150001PR China Department of Mechanical Engineering Nagaoka University of TechnologyNagaoka 940-2188Japan School of Material Science and Engineering Harbin University of Science and TechnologyHarbin 150040PR China

the age-hardening behavior and mechanical properties of the extruded Mg-2Gd-1.2Y-0.5Zn(at.%)alloy with Zr or Mn additions were *** results show that Mn added alloy exhibits more remarkable age-hardening response than Zr added alloy,which is attributed to the fact that partitioning of Mn into the β'phases,β'precipitates and long period stacking ordered(LPSO)phases leads to the decrement in(G d+Y)concentrations in the second phases,facilitating the precipitation during aging *** peak-aged alloys show bimodal microstructure comprising the fine DRXed grains with nano-sized β phases pinned at DRXed grain boundaries as well as coarse worked grains with strong fiber *** strength and good thermal stability were obtained in both peak-aged Mn and Zr added *** the peak-aged Mn added alloy shows higher strength and superior creep resistance due to its denser β'precipitates,thin LPSO phases and γ'precipitates and higher area fraction of worked grains with strong fiber *** 0.2% tensile proof stress and ultimate tensile strength of peak-aged Mn added alloy reach up to 454 MPa and 508 MPa,respectively,with elongation of 3.2%at room *** minimum creep rate of the peak-aged Mn added alloy at 250℃/150 MPa is 2.4 × 10^-8 s^-1,which is superior than previously reported extruded Mg-Gd based alloys.

关键词： Magnesium alloys Rare earth(RE) Precipitation Mechanical properties Creep resistance

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Quasi-in-situ observing the rare earth texture evolution in an extruded Mg-Zn-Gd alloy with bimodal microstructure

引用

Journal of Magnesium and Alloys 2021年第5期9卷 1818-1827页

作者： M.G.Jiang C.Xu H.Yan t.nakata Z.W.Chen C.S.Lao R.S.Chen S.Kamado E.H.Han College of Mechatronics and Control Engineering Shenzhen University3688 Nanhai AveShenzhen 518060China the Group of Magnesium Alloys and their Applications Institute of Metal ResearchChinese Academy of Sciences62 Wencui RoadShenyang 110016China School of Materials Science and Engineering Harbin Institute of TechnologyHarbin 150001China Department of Mechanical Engineering Nagaoka University of TechnologyNagaoka 940-2188Japan

the static recrystallization and associated texture evolution were investigated in an extruded Mg-Zn-Gd alloy with bimodal microstructure based on a quasi-in-situ electron back-scatter diffraction(EBSD)*** typical rare earth(RE)texture formed during annealing,evolving from the bimodal microstructure with[1010]basal fiber texture that consisted of fine recrystallized(RXed)grains and coarse unrecrystallized(un RXed)grains elongated along the extrusion *** both RXed and un RXed regions,the RXed nucleation produced randomized orientations without preferred selection and the RXed grains with RE texture orientation had more intensive growth ability than those with basal fiber orientation,thereby leading to the preferred selection of RE texture orientation during grain *** relationships between stored strain energy,solute drag,grain growth and texture evolution are discussed in *** study provided direct evidence of the RE texture evolution in an extruded Mg-RE alloy,which assists in understanding the formation mechanisms for RE texture during extrusion and better developing wrought Mg alloys with improved formability.

关键词： Magnesium alloy Rare earth texture Extrusion Annealing Recrystallization

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of forced-air cooling on the microstructure and age-hardening response of extruded Mg-Gd-Y-Zn-Zr alloy full with LPSO lamella

引用

Journal of Materials Science & technology 2021年第14期73卷 66-75页

作者： S.Z.Wu t.nakata G.Z.tang C.Xu X.J.Wang X.W.Li X.G.Qiao M.Y.Zheng L.Geng S.Kamado G.H.Fan School of Materials Science and Engineering Harbin Institute of TechnologyHarbin 150001China Research Center for Advanced Magnesium technology Nagaoka University of TechnologyNagaoka 940-2188Japan School of Material Science and Engineering Harbin University of Science and TechnologyHarbin 150040China Key Laboratory for Light-weight Materials Nanjing Tech UniversityNanjing 211816China

the homogenized Mg-8.2 Gd-3.8 Y-1.0 Zn-0.4 Zr(wt.%)alloy full of plate-shaped long period stacking ordered(LPSO)phases was hot extruded in the atmosphere and cooled by the forced-air,then the effect of forced-air cooling on the microstructure and age-hardening response of the alloy was investigated in this *** results show that in comparison with the extruded sample cooling in the atmosphere,the forced-air cooling restricts dynamic recrystallization(DRX)and brings about finer dynamic recrystallized(DRXed)grain size,stronger basal texture and higher dislocation ***,the forced-air cooling promotes the dynamic precipitation in the DRXed regions and facilitates formation of plate-shaped LPSO phases andγ’phases with smaller interspacing in the unrecrystallized(un DRXed)regions,then slightly restricts the precipitation ofβphases during *** peak-ageing treatment,the extruded sample with forced-air cooling shows superior tensile properties with a tensile yield strength of 439 MPa,an ultimate tensile strength of 493 MPa,and elongation to failure of 18.6%.

关键词： Mg-RE alloy LPSO phase Dynamic recrystallization Precipitation Mechanical properties

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

慢性血栓栓塞性肺动脉高压病人在球囊血管成形术前后的肺灌注血容量Ct、肺灌注SPECt、肺血管造影的临床及预测价值比较

引用

国际医学放射学杂志 2019年第1期 125-125页

作者： H.Koike E.Sueyoshi I.Sakamoto M.Uetani t.nakata K.Maemura 潘海燕 Department of Radiology Nagasaki University Graduate School of Biomedical Sciences

摘要目的使用双能量Ct计算肺灌注血容量(PBV)诊断肺血栓栓塞已被广泛接受。本研究评价慢性血栓栓塞性肺高压(CtEPH)病人在球囊肺血管成形术(BPA)前、后的肺

关键词：慢性血栓 SPECt Ct 肺灌注肺血管造影血容量栓塞性

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

肝门部胆管癌R0切除后复发模式

引用

肝胆外科杂志 2010年第6期18卷 403-403页

作者： A.Kobayashi S.Miwa t.nakata S.Miyagawa 王平刘付宝

背景：手术切除是肝门部胆管癌患者获得长期生存唯一手段。随着外科技术和围手术期处理的进步,肝门部胆管癌患者短期存活发生巨大改变。但由于术后高的复发率使患者的长期存率仍低。但对肝门部胆管癌根治性切除后复发模式研究较少。

关键词：肝门部胆管癌复发模式切除后围手术期处理癌患者长期生存手术切除外科技术

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Impact of Pollutant Concentration and Particle Deposition on the Radiative Flow of Casson-Micropolar Fluid between Parallel Plates

引用

Computer Modeling in Engineering & Sciences 2025年第1期142卷 665-690页

作者： Ghaliah Alhamzi Badr Saad t.Alkahtani Ravi Shanker Dubey Vinutha Kalleshachar Neelima Nizampatnam Department of Mathematics and Statistics College of ScienceImam Mohammad Ibn Saud Islamic University(IMSIU)Riyadh11564Saudi Arabia Department of Mathematics College of ScienceKing Saud UniversityRiyadh11989Saudi Arabia Department of Mathematics Amity School of Applied SciencesAmity University RajasthanJaipur302002RajasthanIndia Department of Studies in Mathematics Davangere UniversityDavangere577002India Department of Electronics and Communication Engineering Amrita School of EngineeringAmrita Vishwa VidyapeethamBengaluru560035India

Assessing the behaviour and concentration of waste pollutants deposited between two parallel plates is essential for effective environmental *** the effectiveness of treatment methods in reducing pollution scales is made easier by analysing waste discharge *** waste discharge concentration analysis is useful for assessing how effectively wastewater treatment techniques reduce pollution *** study aims to explore the Casson micropolar fluid flow through two parallel plates with the influence of pollutant concentration and thermophoretic particle *** explore the mass and heat transport features,thermophoretic particle deposition and thermal radiation are *** governing equations are transformed into ordinary differential equations with the help of suitable similarity *** Runge-Kutta-Fehlberg’s fourthfifth order technique and shooting procedure are used to solve the reduced set of equations and boundary *** integration of a neural network model based on the Levenberg-Marquardt algorithm serves to improve the accuracy of predictions and optimize the analysis of *** outcomes are displayed to analyze the characteristics of the relevant dimensionless parameters in the current *** reveal that concentration upsurges as the micropolar parameter *** concentration reduces with an upsurge in the thermophoretic *** upsurge in the external pollutant source variation and the local pollutant external source parameters enhances mass *** surface drag force declines for improved values of porosity and micropolar parameters.

关键词： Micropolar fluid thermal radiation porous medium thermophoretic particle deposition waste discharge concentration

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：