检索结果-南通市图书馆

在牛和人的t和B淋巴细胞内酸性α-萘乙酸酯酶的活性

在线全文

学校读者我要写书评

暂无评论

动物医学进展 1982年第2期 50-52页

作者： t.j.yang 林台城

早期学者证实,鼠和人外周血t淋巴细胞中有非特异性酸性α-萘乙酸酯酶(简称ANAE)活性。本文对相同的牛淋巴细胞同时进行了ANAE活性和自发E-玫瑰花或EAC-玫瑰花形成能力的研究。结果直接证明不但有64.2±4.9％能形成E-玫瑰花的牛淋巴细胞... 详细信息

早期学者证实,鼠和人外周血t淋巴细胞中有非特异性酸性α-萘乙酸酯酶(简称ANAE)活性。本文对相同的牛淋巴细胞同时进行了ANAE活性和自发E-玫瑰花或EAC-玫瑰花形成能力的研究。结果直接证明不但有64.2±4.9％能形成E-玫瑰花的牛淋巴细胞具有ANAE活性,而且38.3±0.8％能形成EAC-玫瑰花的牛淋巴细胞也有ANAE活性。对人

关键词：淋巴细胞玫瑰花酶活性 PHA 白细胞蔷薇属酶活力 ANAE EAC 酸性

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

电泳披覆奈米二氧化钛薄膜之开发与特性研究

过程工程学报 2004年第Z1期4卷 397-402页

作者：林中魁杨聪仁马毅之钟清枝苏程裕逢甲大学材料科学与工程学系台中407 逢甲大学材料科学与工程学系台中407 朝阳科技大学应用化学系台中407 台北科技大学机械系台北106

本研究将奈米二氧化钛粉体以电泳披覆法披覆于不锈钢电极基材表面,并进行后续热处理,以增加其附着强度.实验结果显示,奈米二氧化钛薄膜经600℃烧结处理后,结构上仍为锐钛矿相之二氧化钛,并未有明显变化,且能有效的增加薄膜与基材间之黏... 详细信息

本研究将奈米二氧化钛粉体以电泳披覆法披覆于不锈钢电极基材表面,并进行后续热处理,以增加其附着强度.实验结果显示,奈米二氧化钛薄膜经600℃烧结处理后,结构上仍为锐钛矿相之二氧化钛,并未有明显变化,且能有效的增加薄膜与基材间之黏着性;然而经过800℃烧结处理后,薄膜结构由锐钛矿相之二氧化钛逐渐相变化为金红石相,应力变化引起裂缝产生,并导致奈米二氧化钛薄膜性质降低.

关键词：电泳披覆法奈米薄膜二氧化钛 X光吸收光谱

Construction of 2D/2D ti_(3)C_(2)t_(x)MXene/CdS heterojunction with photothermal effect for efficient photocatalytic hydrogen production

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Materials Science & technology 2024年第4期171卷 1-9页

作者： t.Y.Huang Z.yang S.Y.yang Z.H.Dai Y.j.Liu j.H.Liao G.Y.Zhong Z.j.Xie Y.P.Fang S.S.Zhang Key Laboratory for Biobased Materials and Energy of Ministry of Education Guangdong Laboratory for Lingnan Modern AgricultureCollege of Materials and EnergySouth China Agricultural UniversityGuangzhou 510643China School of Physics and Optoelectronics South China University of TechnologyGuangzhou 510640China School of Chemical Engineering and Energy technology Guangdong Provincial Key Laboratory of Distributed Energy SystemsDongguan University of TechnologyDongguan 523808China

the insensitivity of semiconductors to visible and infrared light is a key constraint on the utilization of light energy in photocatalytic *** photocatalysts with full-spectrum absorption through surface engineering is an effective approach to fully harnessing light energy in semiconductor ***,a novel stable ti_(3)C_(2)t_(x)MXene/CdS heterojunction catalyst is obtained by in-situ epitaxial growth of two-dimensional(2D)CdS nanosheets on 2D MXene interface via a solvothermal *** exceptional light absorption properties of MXene confer outstanding full-spectrum driven photocat-alytic hydrogen evolution capability upon the heterogeneous *** unique 2D/2D structure effectively mitigated the recombination of photogenerated carriers,enhancing the photocatalytic performance of the ***,the composite catalyst exhibits a significantly higher surface temperature of 80.4℃under visible light irradiation at an intensity of 0.1 W/cm^(2),which is 1.84 times higher than that of *** irradiation of visible and near infrared light,the composite catalyst with photothermal ef-fect demonstrates a remarkable hydrogen evolution rate of 65.4 mmol g^(-1)h^(-1),which is 7.2 times higher than that of CdS *** study introduces a novel approach for constructing full-spectrum absorption catalysts and expands the application of the photothermal effect in photocatalytic hydrogen evolution research.

关键词： two-dimensional structure Heterostructure Photothermal effect Photocatalyst Hydrogen evolution

In situ characterization of particle formation in spray flame synthesis using wide-angle light scattering

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Particuology 2024年第3期86卷 304-312页

作者： Simon Aβmann Franz j.t.Huber Stefan Will Lehrstuhl für technische thermodynamik(Ltt) Friedrich-Alexander-Universitat Erlangen-Nürnberg(FAU)Erlangen91058Germany Erlangen Graduate Schoolin Advanced Optical technologies(SAOt) Friedrich-Alexander-Universitat Erlangen-Nurnberg(FAU)Erlangen91052Germany Competence Unit Engineering of Advanced Materials(EAM) Friedrich-Alexander-Universitat Erlangen-Nürnberg(FAU)Erlangen91052Germany

Wide-angle light scattering(WALS)was used for in situ measurements of droplet and nanoparticle size distributions during the synthesis of titania and iron oxide particles from liquid precursor solutions in the standardized SpraySyn burner for spray flame *** was synthesized from titanium tetraisopropoxide(ttIP)and iron oxide from iron(II)nitrate nonahydrate(INN)using ethanol(EtOH)as *** images were taken at heights up to 120 mm above the burner surface and classified into droplet and particle *** size distributions were derived from a sequential analysis of scattering data containing the oscillating Mie pattern,the lognormal size distribution parameters for spherical and fractal particle fractions from a multivariate approach on averaged particle scattering *** results show that the precursor addition leads to altered evaporation behavior and even droplet disruption probably induced by puffing or micro-explosions compared to pure *** the case of ttIP(a hygroscopic alkoxide),the synthesis of a large fraction of spheres was observed,while the nitrate INN leads to the formation of mostly fractal aggregates.

关键词： Spray flame synthesis Metal oxide particles Elastic light scattering Droplet size distribution Nanoparticle morphology Particle size distribution

Reply to the note by Li Piani et al.

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Defence technology（防务技术） 2024年第1期31卷 603-606页

作者： t.Li Piani j.Weerheijm L.j.Sluys tU Delft Stevinweg 12628 CNDelftthe Netherlands tNO PO Box 452280 AARijswijkthe Netherlands NLDA Faculty of Military Sciences1781 CADen Helderthe Netherlands

In 2017,a ballistic phenomenological model was proposed by the authors of Ref.[1] to numerically simulate the experimental depths of small caliber projectiles impacting walls made of *** opportunity for a new model in the field revealed from the observation that two older models recently used by the authors of Ref.[2] shared a linear relationship between the penetration depth P and the impacting velocity v_(O).

关键词： Penetration Adobe Modeling

Mathematical modelling of ball and plate system with experimental and correlation function-based model validation

在线全文

学校读者我要写书评

暂无评论

Control theory and technology 2024年第2期22卷 326-341页

作者： t.R.Dil Kumar S.j.Mija Department of Electrical Engineering National Institute of Technology CalicutKozhikode673601KeralaIndia

the ball and plate system is an inherently nonlinear under actuated benchmark system used for validating the performance of various control schemes. A mathematical model depicting the dynamics close to that of the system is very much required for such a test bed. In this correspondence, the complete nonlinear model, a simplified nonlinear model, and a linearized model of the ball and plate system are developed. the system comprises a ball and plate mechanism and a rotary servo unit. the ball and plate mechanism is modelled using the Euler–Lagrange method, whereas the rotary servo subsystem is modelled from the first principles. the nonlinear model of the combined system is developed by including the dynamics of the servo motor with gear and rolling resistance between the ball and the plate. the simplified nonlinear model of the system is obtained with suitable assumptions. the model is linearized around the operating point using the jacobian. the validity of the developed models is investigated through correlation function analysis. the open-loop response of the three models, viz., nonlinear, simplified nonlinear, and linearized models, is analyzed in the MAtLAB/Simulink platform. Since the open-loop system is unstable, the experimental validation of the model is performed with a double-loop PSO (particle swarm optimization) PID control scheme.

关键词： Ball and plate system Correlation function Model validation Particle swarm optimization(PSO) PSO PID controller

Atomistic Investigation of Shock-Induced Amorphization within Micro-shear Bands in Hexagonal Close-Packed titanium

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Acta Metallurgica Sinica(English Letters) 2024年第9期37卷 1590-1600页

作者： Z.C.Meng K.G.Wang t.Ali D.Li C.G.Bai D.S.Xu S.j.Li A.H.Feng G.j.Cao j.H.Yao Q.B.Fan H.Wang R.yang Institute of Metal Research Chinese Academy of SciencesShenyang 110016China School of Materials Science and Engineering University of Science and Technology of ChinaShenyang 110016China Interdisciplinary Centre for Additive Manufacturing(ICAM) School of Materials and ChemistryUniversity of Shanghai for Science and TechnologyShanghai 200093China School of Materials Science and Engineering Tongji UniversityShanghai 201804China Key Laboratory for Light-Weight Materials Nanjing Tech UniversityNanjing 210009China National Key Laboratory of Science and technology on Materials Under Shock and Impact School of Materials Science and EngineeringBeijing Institute of TechnologyBeijing 100081China Beijing Institute of technology Chongqing Innovation Center Chongqing 401135China

the mechanical response of a single crystal titanium sample against(0001)α surface impact was investigated using molecular dynamics ***,non-uniform plastic deformation was observed in the *** high strain rates,amorphization occurred near the edge of the contact region where severe shear strain induced a large number of stacking faults(SFs)and *** contrast,the central part of the contact region underwent less deformation with significantly fewer ***,instead of amorphization by consuming SFs and dislocations,there was a gradual increase in the density of dislocations and SFs during the process of *** local amorphous regions eventually grew into shear bands.

关键词： Shock compression Amorphization Shear band titanium Molecular dynamics

Superplasticity of fine-grained Mg-10Li alloy prepared by severe plastic deformation and understanding its deformation mechanisms

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

journal of Magnesium and Alloys 2024年第1期12卷 316-331页

作者： H.t.jeong S.W.Lee W.j.Kim Department of Materials Science and Engineering Hongik UniversityMapo-guSangsu-dong 72-1Seoul 121-791Republic of Korea

the superplastic behavior and associated deformation mechanisms of a fine-grained Mg-10.1 Li-0.8Al-0.6Zn alloy(LAZ1011)with a grain size of 3.2μm,primarily composed of the BCCβphase and a small amount of the HCPαphase,were examined in a temperature range of 473 K to 623 *** microstructural refinement of this alloy was achieved by employing high-ratio differential speed *** best superplasticity was achieved at 523 K and at strain rates of 10^(-4)-5×10^(-4)s^(-1),where tensile elongations of 550±600%were *** the heating and holding stage of the tensile samples prior to tensile loading,a significant increase in grain size was observed at temperatures above 573 ***,it was important to consider this effect when analyzing and understanding the superplastic deformation behavior and *** the investigated strain rate range,the superplastic flow at low strain rates was governed by lattice diffusion-controlled grain boundary sliding,while at high strain rates,lattice diffusion-controlled dislocation climb creep was the rate-controlling deformation *** was concluded that solute drag creep is unlikely to *** the late stages of deformation at 523 K,it was observed that grain boundary sliding led to the agglomeration of theαphase,resulting in significant strain *** mechanism maps were constructed forβ-Mg-Li alloys in the form of 2D and 3D formats as a function of strain rate,stress,temperature,and grain size,using the constitutive equations for various deformation mechanisms derived based on the data of the current tests.

关键词： Magnesium-lithium alloy Superplasticity Severe plastic deformation Grain size Grain growth

thermoluminescence characterization of natural and synthetic irradiated Ce-monazites

在线全文

学校读者我要写书评

暂无评论

journal of Rare Earths 2024年第4期42卷 643-650页

作者： V.Correcher C.Boronat j.Garcia-Guinea j.F.Benavente t.Rivera-Montalvo CIEMAt Av.Complutense 4028040MadridSpain MNCN-CSIC J.Gutierrez Abascal 228006MadridSpain Instituto Politécnico Nacional CICATA-IPNAv.Legaria 694Mexico City11500Mexico

the thermoluminescence(tL)emission of synthetic and natural Ce-monazites was characterized here to determine the potential application in the identification of microscopic defects from a qualitative point of view trying to link each tL peak to a chemical-physical *** kinetic parameters that lead the luminescence processes were calculated by means of variable heating rate and computing glow curve deconvolution methods and allow identifying three groups of components at~90,130 and 290℃(for the mineral sample)and~90,170,220,270 and 320℃(for the synthetic CePO_(4):Nd_(0.20),La_(0.25)).the main differences appreciated in these complex tL curves are mainly due to(i)the content of impurities(natural sample contains lanthanides as well as U 0.60%and th 5.22%)and(ii)the degree of crystallinity of the samples which is directly related to the type of impurities(synthetic monazite relies only on Nd and La).the behavior of the dose response in the range of 1-8 Gy is similar for both samples;the tL intensity increases linearly as the dose increases without changes in the position of the maxima,denoting first-order kinetic luminescence *** peak could be mostly associated with structural defects(i.e.,phase transitions),chemical reactions(i.e.,Ce3+?Ce4+redox reaction,dehydration or dehydroxylation processes)or intrinsic defects(i.e.,Frenkel defects,ODCs or NBOHCs).

关键词： thermoluminescence Kineticparameters Phosphate Ce-monazite Defects Rare earths