检索结果-南通市图书馆

Artificial neural network approach to assess selective flocculation on hematite and kaolinite

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2014年第7期21卷 637-646页

作者： Lopamudra Panda P.K.Banerjee surendra kumar biswal R.Venugopal N.R.Mandre R&D Tata Steel Limited Institute of Minerals and Materials Technology(Council of Scientific and Industrial Research) Department of Fuel & Minerals Engineering Indian School of Mines University

Because of the current depletion of high grade reserves, beneficiation of low grade ore, tailings produced and tailings stored in tailing ponds is needed to fulfill the market demand. Selective flocculation is one alternative process that could be used for the beneficiation of ultra-fine material. This process has not been extensively used commercially because of its complex dependency on process parameters. In this paper, a selective flocculation process, using synthetic mixtures of hematite and kaolinite in different ratios, was attempted, and the ad-sorption mechanism was investigated by Fourier transform infrared （FTIR） spectroscopy. A three-layer artificial neural network （ANN） model （4？4？3） was used to predict the separation performance of the process in terms of grade, Fe recovery, and separation efficiency. The model values were in good agreement with experimental values.

关键词： hematite kaolinite flocculation artificial neural networks back propagation algorithm Fourier transform infrared spectroscopy separation efficiency

Performance evaluation for selectivity of the flocculant on hematite in selective flocculation

在线全文

学校读者我要写书评

暂无评论

International Journal of Minerals,Metallurgy and Materials 2013年第12期20卷 1123-1129页

作者： Lopamudra Panda Pradip K.Banerjee surendra kumar biswal R.Venugopal N.R.Mandre Research and Development Tata Steel Ltd. Institute of Minerals and Materials Technology (Council of Scientific and Industrial Research) Indian School of Mines University

Increased demand for iron ore necessitates the utilization of low-grade iron ore fines, slimes, and existing tailings. Selective flocculation can be an alternative physico-chemical process for utilizing these low-grade fines, slimes, and tailings. In selective fiocculation, the most critical objective is the selection of proper reagents that will make fioc of desired minerals. In present study, selective flocculation was applied to ultra-fine synthetic mixtures of hematite and kaolinite, and the Fe value was upgraded up to 65.78% with the reduction of Al2O3 and SiO2 values to 2.65% and 3.6670, respectively. Here, degraded wheat starch was used as a *** this process, separation occurs on the basis of the selectivity of the flocculant. The selectivity of the fiocculant can be quantified in terms of separation efficiency. Here, an attempt was also made to develop a correlation between separation efficiency and major operating parameters such as flocculent dose, pH value, and solid concentration to predict the separation performance.

关键词： hematite kaolinite selective fiocculation modeling iron ores tailings

Critical Review on Balanites aegyptiaca Delile:Phytoconstituents,Pharmacological Properties and Nanointerventions

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Integrative Medicine 2024年第7期30卷 653-663页

作者： surendra kumar Gautam Rakesh kumar Paul Devesh M.Sawant Amita Sarwal Kaisar Raza Department of Pharmacy School of Chemical Sciences and PharmacyCentral University of RajasthanBandarsindriAjmerRajasthan305817India University Institute of Pharmaceutical Sciences Panjab UniversityChandigarh160014India

Balanites aegyptiaca Delile(BA)is an enduring xerophytic woody and spinous flowering tree and is commonly known as desert date or Ingudi(Hingot).It belongs to the family Zygophyllaceae,which is specific to be drought areas of Nigeria,Africa,South Asia and India(Rajasthan).In Ayurveda,this traditional medicinal plant is reported for the management of jaundice,syphilis,yellow fever,metabolic disorders,liver,and spleen *** main aim of the review is to compile its medicinal uses and further advancements to showcase the promises inherited in various parts of the plant for the benefit of *** per the literature survey,various researchers have focused on the detailed investigation of BA including the phytopharmacological evidence,chemical constituents,nano-formulations,commercialized products,and clinical *** remarkable scaffolds and isolated compounds like diosgenin,yamogenin,balanitin1/2,balanitin 3,bal4/5,bal6/7,rutin-3-glycosides,3,7-diglycosides,(3,12,14,16)–(12-hydroxycholest-5-ene-3,16-diyl-bis)-D-glucopyranoside and balanitoside have been ***,this traditional plant has been scientifically proven by in vitro and in *** on the complete review of this plant,most of the compounds have been isolated from the fruit and kernel ***,based on the literature,a histogram was developed for pharmacological activity in which antidiabetic study was found to be more compared to other pharmacological *** a spinous desert dates,this plant needs to be explored more to bring out newer phytochemicals in the management of various diseases.

关键词： Delile desert date phytochemicals nano-phytopharmaceutical pharmacological activities traditional medicine

A nano-plasmonic HMIM waveguide based concurrent dual-band BPF using circular ring resonator

在线全文

学校读者我要写书评

暂无评论

Optoelectronics Letters 2024年第3期20卷 152-156页

作者： Miriyala Sridhar surendra kumar Bitra TS N Murthy Koppireddi Padmaraju Department of Electronics and Communication Engineering Koneru Lakshmaiah Education FoundationGunturIndia Astra Microwave Products Ltd. HyderabadIndia Department of Electronics and Communication Engineering JNTU-GV College of EngineeringVizianagaramIndia Department of Electronics and Communication Engineering Jawaharlal Nehru Technological University KakinadaKakinadaIndia

This article analyzes the transmission line characteristics of plasmonic hybrid metal insulator metal(HMIM) wave-guide, circular ring resonator(CRR) based dual-band band-pass filters with two transmission poles in both pass-bands in the optical regime using coupled line feed. The transmission line characteristics of an HMIM waveguide, such as characteristic impedance(Z_(PV)), effective refractive index(n_(eff)) and propagation length(L_(spp)), have been obtained by using full wave simulation.

关键词： waveguide resonator circular

Microstructure,Corrosion and Mechanical Properties of Medium-Thick 6061-T6 Alloy/T2 Pure Cu Dissimilar Joints Produced by Double Side Friction Stir Z Shape Lap-Butt Welding

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Mechanical Engineering 2024年第2期37卷 385-400页

作者： Jiuxing Tang Guoxin Dai Lei Shi Chuansong Wu Sergey Mironov surendra kumar Patel Song Gao Mingxiao Wu MOE Key Lab for Liquid-Solid Structure Evolution and Materials Processing Shandong UniversityJinan 250061China Laboratory of Mechanical Properties of Nanoscale Materials and Superalloys Belgorod State UniversityBelgorod 308015Russia School of Mechanical Engineering Qilu University of Technology(Shandong Academy of Sciences)Jinan 250353China State Grid Henan Electric Power Research Institute Zhengzhou 450052China

A novel double side friction stir Z shape lap-butt welding(DS-FSZW)process was proposed to achieve excellent mechanical properties of Al/Cu medium-thick dissimilar *** influence of welding parameters on weld microstructure and properties of DS-FSZW joint were systematically *** indicated that defect-free medium-thick Al/Cu DS-FSZW joint could be achieved under an optimal welding ***-FSZW joint was prone to form void defects in the bottom of the second-pass *** recrystallization mechanisms at the top and middle of the weld nugget zone(WNZ)were continuous dynamic recrystallization(CDRX)and geometric dynamic recrystallization(GDRX).While the major recrystallization mechanism at the bottom of the WNZ was ***-FSZW joint of the optimal welding condition with 850 r/min-400 mm/min was produced with a continuous thin and crack-free IMCs layer at the Al/Cu interface,and the maximum tensile strength of this joint is 160.57 MPa,which is equivalent to 65.54%of pure Cu base ***,the corrosion resistance of Al/Cu DS-FSZW joints also achieved its maximum value at the optimal welding parameter of 850 r/min-400 mm/*** demonstrates that the DS-FSZW process can simultaneously produce medium-thick Al/Cu joints with excellent mechanical performance and corrosion resistance.

关键词： DS-FSZW Al/Cu dissimilar joint Corrosion behaviour Intermetallic compounds Microstructure Mechanical properties

Wavelet Synchro-squeezing Transform and Dynamic Threshold Supported Symmetrical Power Swing Technique for Modern Transmission Network

在线全文

学校读者我要写书评

暂无评论

Chinese Journal of Electrical Engineering 2024年第2期10卷 30-43页

作者： Monalisa biswal kumar Raja Andanapalli Papia Ray Department of Electrical Engineering National Institute of Technology RaipurChhattisgarh 492010India Department of Electrical Engineering Veer Surendra Sai University of TechnologyBurla Sambalpur 768018India

Distance relays are prone to symmetrical power swing *** mitigate this issue,a dynamic threshold-supported algorithm is proposed.A single logic is not supposed to be secure for all ***,a supervisory algorithm,as proposed in this study,can aid in the improvement of the immunity of the relay during swing cases and be sensitive to symmetrical *** the developed stages,a three-phase power signal was used and processed in two different steps:(i)extraction of the effective intrinsic mode function(IMF)selected from the Kurtosis analysis using the wavelet synchro-squeezing transform,and(ii)estimation of the average Euclidean distance index using the absolute values of the decomposed IMF’*** adaptive threshold facilitated resistance to swing *** the onset of a symmetrical fault,the proposed algorithm efficiently discriminated among events using a dynamic *** IEEE 39-bus test system and Indian Eastern Power Grid networks were modelled using PSCAD software,and cases were generated to test the efficacy of the *** impact of the proposed method on a large-scale wind farm was also evaluated.A comparative analysis with other existing methods revealed the security and dependability of the proposed method.

关键词： Distance relays symmetrical power swing wind farm wavelet synchro-squeezing transform(WSST) Euclidean distance

Microbial-inspired self-healing of concrete cracks by sodium silicate-coated recycled concrete aggregates served as bacterial carrier

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Frontiers of Structural and Civil Engineering 2024年第1期18卷 14-29页

作者： Jing XU Xianzhi WANG Wu YAO Anna A.KULMINSKAYA surendra P.SHAH Key Laboratory of Advanced Civil Engineering Materials(Ministry of Education) School of Materials Science and EngineeringTongji UniversityShanghai 201804China Petersburg Nuclear Physics Institute Named by B.P.Konstantinov of National Research Centre Kurchatov InstituteGatchina 188300Russia Center for Advanced Construction Materials University of Texas at ArlingtonArlingtonTX 76019USA

Microbially induced carbonate precipitation(MICP)is a promising technique for the autonomous healing of concrete *** this study,the effect of pH on MICP was *** results indicate that the MICP process was inhibited when the pH was higher than *** vaterite and calcite were produced when the pH was*** concrete aggregates(RCA)coated with sodium silicate have been proposed as protective carriers for microbial healing *** the presence of the coated RCA resulted in a loss of the splitting tension strength of the concrete,the loaded healing agents were highly efficient in self-healing *** incorporated with 20%RCA loaded with healing agents exhibited the best self-healing *** the initial crack widths were between 0.3 and 0.4 mm,the 7-d mean healing rate was approximately 90%.At 28 d,the crack area filling ratio was 86.4%,while its water tightness recovery ratio was 74.4%and 29.8%,respectively,for rapid and slow *** study suggests that RCA coated with sodium silicate is an effective method for packaging microbial healing agents and has great potential for developing cost-effective self-healing concrete.

关键词： self-healing microbial-induced carbonate precipitation water uptake recycled concrete aggregate protective carrier

Erosion Wear Behaviour of Kenaf/Glass Hybrid Polymer Composites

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Harbin Institute of Technology(New Series) 2024年第1期31卷 78-89页

作者： Chandrakanta Mishra Deepak kumar Mohapatra Chitta Ranjan Deo Punyapriya Mishra Kiran kumar Ekka Department of Mechanical Engineering Veer Surendra Sai University of TechnologySambalpur 768018India

The awareness amongst the researchers to develop an environment friendly sustainable material leads to explore new class of plant-based fiber for making composites. Hybridization of such plant-based fiber with inclusion of engineered fiber is one of the promising methods to not only enhanced the mechanical performance but also suppressed the drawbacks that associate with such plant-based fiber to some extent. A usual hand lay-up method was taken-up in this work to fabricate four layered of hybrid kenaf(K)/glass(G)polyester laminates with different stacking order such as KKKK,KGKG,KGGK,GKKG and GGGG. The erosive character of the laminates was examined under three distinct particle velocities(48m/s, 70m/s,82m/s)and four different impact angles(30°, 45°, 60°, 90°). All fabricated laminates exhibited a semiductile character at lower velocities(48m/s and70m/s)as peak wear rate was observed at45° impact angle. However,they showed a semi-brittle character at high velocity(82m/s)as maximum rate of erosion was noticed at60° impact angle. Again,the influence of stacking order of piles on erosion wear was also clearly noticed. Moreover,the semi-brittle/semi-ductile characterization was also evidenced in accordance to the range of erosion efficiencies. The micro-structures of worn surfaces were inspected thoroughly from the images of scanning electron microscope(SEM)to evident the mechanism of erosion.

关键词： hybrid composites erosion wear void micro⁃hardness

Performance Improvement of Kenaf/Glass Polymer Hybrid Composites by Effective Application of Fish Scale Powder as Filler:A Novel Approach

在线全文

学校读者我要写书评

暂无评论

Journal of Harbin Institute of Technology(New Series) 2024年第3期31卷 80-96页

作者： Chandrakanta Mishra Deepak kumar Mohapatra Chitta Ranjan Deo Chetana Tripathy Kiran kumar Ekka Department of Mechanical Engineering Veer Surendra Sai University of TechnologySambalpur 768018OdishaIndia

Modern technology for developing new items made from renewable resources is becoming more and more popular as a result of rising environmental ***,contemporary polymer composites have included the hybridization of natural fibers with synthetic ones,along with the inclusion of a variety of biowaste filler for developing sustainable *** this work,the kenaf/glass hybrid polyester composites are strengthened by the addition of fish scale(FS),which is taken from the fish􀆳s outermost layer of *** different stacked-order laminates,such as KKKK,KGKG,GKKG,KGGK,and GGGG,are fabricated by using the hand lay-up method with four different weight concentrations of filler content:0%,5%,10%,and 15%.Mechanical possessions such as tensile,flexural,impact strength and micro-hardness have been evaluated through experimentation in accordance with ASTM *** experimental findings revealed that,the tensile strength and micro-hardness value of KGKG laminates with 15wt% of FS filler are found to be maximum of 118.72 MPa and 17.82 HV respectively which are 39.67%and 26.11%greater than that of KGKG laminates without FS ***,the flexural and impact strength of same laminates with 10 wt% FS filler exhibited a maximum value of 142.77 MPa and 62.08 kJ/m^(2).In order to corroborate its applicability for structural and building materials in open environment,the dimensional stability of the composite has been studied through moisture absorption *** influences of FS filler loading on dimensional stability and resistance to moisture absorption capacity of laminates are also *** experimental results reflected that the addition of FS-filler has significantly improved the dimensional stability of the laminates in moist environment by reducing the moisture absorption *** further support the mode of failures,a fractography investigation of fractured surfaces was conducted.

关键词： fish scale fiber polyester hybrid composites mechanical properties