检索结果-南通市图书馆

Room and cryogenic deformation behavior of AZ61 and AZ61-xCaO(x=0.5,1 wt.%)alloy

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第5期12卷 1996-2009页

作者： Umer Masood Chaudry Hafiz Muhammad Rehan Tariq Nooruddin Ansari Soo Yeol lee Tea-sung jun Department of Mechanical Engineering Incheon National UniversityIncheon 22012Republic of Korea Research Institute for Engineering and Technology Incheon National UniversityIncheon 22012Republic of Korea Department of Materials Science&Engineering Chungnam National UniversityDaejeon 34134Republic of Korea

This study investigates the influence of CaO(0.5,1(wt.%))alloying on the microstructural evolution,texture development and deformation behavior of AZ61 magnesium *** uniaxial tension tests at room(RT)and cryogenic(CT,-150℃)temperature were performed to investigate the twinability and dislocation behavior and its consequent effect on flow stress,ductility and strain hardening *** results showed that the AZ61-1CaO exhibited superior strength/ductility synergy at RT with a yield strength(YS)of 223 MPa and a ductility of 23% as compared to AZ61(178 MPa,18.5%)and AZ61-0.5CaO(198 MPa,21%).Similar trend was witnessed for all the samples during CT deformation,where increase in the YS and decrease in ductility were *** Mtex tools based in-grain misorientation axis(IGMA)analysis of RT deformed samples revealed the higher activities of prismatic slip in AZ61-CaO,which led to superior ***,subsequent EBSD analysis of CT deformed samples showed the increased fraction of fine{10-12}tension twins and nucleation of multiple{10-12}twin variants caused by higher local stress concentration at the grain boundaries,which imposed the strengthening by twin-twin ***,the detailed investigations on strengthening contributors showed that the dislocation strengthening has the highest contribution towards strength in all samples.

关键词： Magnesium Twinning Twinning variant EBSD Cryogenic deformation

Increased thalamocortical connectivity from the affected thalamus to the unaffected hemisphere in a stroke patient

在线全文

学校读者我要写书评

暂无评论

Neural Regeneration Research 2020年第8期15卷 1568-1568页

作者： sung Ho Jang You sung Seo sung jun lee Department of Physical Medicine and Rehabilitation College of MedicineYeungnam University

Consciousness is controlled by complicated actions of various neural structures(Schiff,2010;Long et al.,2016).The thalamocortical connections between the central thalamus and cerebral cortex are considered an important neural structure for consciousness(Laureys et al.,2000;Schiff,2010;Jang and lee,2015).Here,we report a patient who revealed increased thalamocortical connectivity from the affected thalamus to the unaffected hemisphere through interthalamic adhesion.

关键词： al. patient thalamus

Enhancing Identity Protection in Metaverse-Based Psychological Counseling System

在线全文

学校读者我要写书评

暂无评论

Computers, Materials & Continua 2024年第1期78卷 617-632页

作者： jun lee Hanna lee Seong Chan lee Hyun Kwon Department of Game Software Hoseo UniversityAsan-si31499Korea Yatav Enter Seoul04799Korea Department of Artificial Intelligence and Data Science Korea Military AcademySeoul01805Korea

Non-face-to-face psychological counseling systems rely on network technologies to anonymize information regard-ing client ***,these systems often face challenges concerning voice data leaks and the suboptimal communication of the client’s non-verbal expressions,such as facial cues,to the *** study proposes a metaverse-based psychological counseling system designed to enhance client identity protection while ensuring efficient information delivery to counselors during non-face-to-face *** proposed systemincorporates a voicemodulation function that instantlymodifies/masks the client’s voice to safeguard their ***,it employs real-time client facial expression recognition using an ensemble of decision trees to mirror the client’s non-verbal expressions through their avatar in the metaverse *** system is adaptable for use on personal computers and smartphones,offering users the flexibility to access metaverse-based psychological counseling across diverse *** performance evaluation of the proposed system confirmed that the voice modulation and real-time facial expression replication consistently achieve an average speed of 48.32 frames per second or higher,even when tested on the least powerful smartphone ***,a total of 550 actual psychological counseling sessions were conducted,and the average satisfaction rating reached 4.46 on a 5-point *** indicates that clients experienced improved identity protection compared to conventional non-face-to-face metaverse counseling ***,the counselor successfully addressed the challenge of conveying non-verbal cues from clients who typically struggled with non-face-to-face psychological *** proposed systemholds significant potential for applications in interactive discussions and educational activities in the metaverse.

关键词： Metaverse counseling system face tracking identity protection

Multiphase cooperation for multilevel strain accommodation in a single-crystalline BiFeO3 thin film

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Chinese Physics B 2024年第9期33卷 57-66页

作者： Wooseon Choi Bumsu Park Jaejin Hwang Gyeongtak Han Sang-Hyeok Yang Hyeon jun lee sung Su lee Ji Young Jo Albina Y.Borisevich Hu Young Jeong Sang Ho Oh Jaekwang lee Young-Min Kim Department of Energy Science Sungkyunkwan University(SKKU)Suwon 16419Republic of Korea Samsung Electronics Hwaseong 18448Republic of Korea Department of Physics Pusan National UniversityBusan 46241Republic of Korea LG Energy Solution Daejeon 34122Republic of Korea Department of Materials Science and Engineering Kangwon National UniversityRepublic of Korea School of Materials Science and Engineering Gwangju Institute of Science and Technology(GIST)Gwangju 61005Republic of Korea Center for Nanophase Materials Sciences Oak Ridge National LaboratoryTN 37831USA Graduate School of Semiconductor Materials and Devices Engineering Ulsan National Institute of Science and Technology(UNIST)Ulsan 44919Republic of Korea Department of Energy Engineering KENTECH Institute for Energy Materials and DevicesKorea Institute of Energy Technology(KENTECH)Naju 58330Republic of Korea

The functionalities and diverse metastable phases of multiferroic BiFeO3(BFO)thin films depend on the misfit *** mixed phase-induced strain relaxation in multiphase BFO thin films is well known,it is unclear whether a singlecrystalline BFO thin film can accommodate misfit strain without the involvement of its ***,understanding the strain relaxation behavior is key to elucidating the lattice strain–property *** this study,a correlative strain analysis based on dark-field inline electron holography(DIH)and quantitative scanning transmission electron microscopy(STEM)was performed to reveal the structural mechanism for strain accommodation of a single-crystalline BFO thin *** nanoscale DIH strain analysis results indicated a random combination of multiple strain states that acted as a primary strain relief,forming irregularly strained *** STEM-based bond length measurement of the corresponding strained nanodomains revealed a unique strain accommodation behavior achieved by a statistical combination of multiple modes of distorted structures on the unit-cell *** globally integrated strain for each nanodomain was estimated to be close to􀀀1.5%,irrespective of the nanoscale strain states,which was consistent with the fully strained BFO film on the SrTiO3 *** functional theory calculations suggested that strain accommodation by the combination of metastable phases was energetically favored compared to single-phase-mediated *** discovery allows a comprehensive understanding of strain accommodation behavior in ferroelectric oxide films,such as BFO,with various low-symmetry polymorphs.

关键词： BiFeO_(3) scanning transmission electron microscopy electron holography multiferroic material strain mapping

Chemical and mechanical properties of stainless, environment-friendly, and nonflammable Mg alloys (SEN alloys): A review

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第3期12卷 841-872页

作者： Jong Un lee Hyun Ji Kim Sang-Cheol Jin Ye Jin Kim Young Min Kim Bong Sun You jun Ho Bae sung Hyuk Park Advanced Metals Division Korea Institute of Materials ScienceChangwon 51508Republic of Korea Department of Materials Science and Metallurgical Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Missile Research Institute Agency for Defense DevelopmentDaejeon 34060Republic of Korea

This review article provides overall understanding of stainless,environment-friendly,and nonflammable Mg alloys(SEN alloys)recently developed at the Korea Institute of Materials *** alloys are produced by adding small amounts of Ca and Y(each<1 wt%)into commercial Mg–Al based alloys,resulting in exceptional ignition and corrosion resistances and impressive mechanical *** main advantages of SEN alloys are as follows.(1)A dense multi-oxide layer of SEN alloys comprising MgO,CaO,and Y_(2)O_(3) impedes the outward dispersion of Mg vapor and the inward penetration of O_(2) during oxidation,thereby enhancing the oxidation and ignition resistances.(2)The presence of Ca-and Y-based second-phase particles in SEN alloys can enhance their corrosion resistance because Ca-containing particles prevent the spread of corrosion,and the replacement of Al-containing particles with less noble ones containing Y(e.g.,Al–Mn–Y or Al–Y particles)retards corrosion.(3)The addition of minor amounts of Ca and Y renders excellent mechanical properties due to improved strengthening *** enhanced properties are attributed to more pronounced dynamic recrystallization and grain refining behaviors caused by the second-phase particles during extrusion.(4)Despite the presence of various types of second-phase particles,the fatigue properties of SEN9 alloys are similar to those of commercial AZ91 alloys.(5)Simultaneous introduction of Ca and Y suppresses the formation of Mg17Al12 discontinuous precipitates during aging,leading to the enhanced elongation of aged SEN alloys.(6)Adding mischmetal into the SEN9 alloy leads to a six-fold enhancement in ***,the studies conducted on SEN alloys demonstrate their excellent ignition and corrosion resistances and mechanical properties,which broaden the industrial applications of Mg alloys by addressing their inherent weaknesses.

关键词： SEN magnesium alloy Corrosion resistance Ignition resistance Mechanical properties Extrudability.

Development of vehicle-recognition method on water surfaces using LiDAR data:SPD^(2)(spherically stratified point projection with diameter and distance)

在线全文

学校读者我要写书评

暂无评论

Defence Technology（防务技术） 2024年第6期36卷 95-104页

作者： Eon-ho lee Hyeon jun Jeon Jinwoo Choi Hyun-Taek Choi Sejin lee The Department of Mechanical Engineering Kongju National University1223-24 Cheonan-daeroCheonan 31080Republic of Korea Ocean System Engineering Research Division Korea Research Institute of Ships and Ocean Engineering(KRISO)Daejeon 34103Republic of Korea The Division of Mechanical&Automotive Engineering Kongju National University1223-24 Cheonan-daeroCheonan 31080Republic of Korea

Swarm robot systems are an important application of autonomous unmanned surface vehicles on water *** monitoring natural environments and conducting security activities within a certain range using a surface vehicle,the swarm robot system is more efficient than the operation of a single object as the former can reduce cost and save *** is necessary to detect adjacent surface obstacles robustly to operate a cluster of unmanned surface *** this purpose,a LiDAR(light detection and ranging)sensor is used as it can simultaneously obtain 3D information for all directions,relatively robustly and accurately,irrespective of the surrounding environmental *** the GPS(global-positioning-system)error range exists,obtaining measurements of the surface-vessel position can still ensure stability during platoon *** this study,a three-layer convolutional neural network is applied to classify types of surface *** aim of this approach is to redefine the sparse 3D point cloud data as 2D image data with a connotative meaning and subsequently utilize this transformed data for object classification ***,we have proposed a descriptor that converts the 3D point cloud data into 2D image *** use this descriptor effectively,it is necessary to perform a clustering operation that separates the point clouds for each *** developed voxel-based clustering for the point cloud ***,using the descriptor,3D point cloud data can be converted into a 2D feature image,and the converted 2D image is provided as an input value to the *** intend to verify the validity of the proposed 3D point cloud feature descriptor by using experimental data in the ***,we explore the feasibility of real-time object classification within this framework.

关键词： Object classification Clustering 3D point cloud data LiDAR(light detection and ranging) Surface vehicle

Novel fabrication techniques for ultra-thin silicon based flexible electronics

在线全文

学校读者我要写书评

暂无评论

International Journal of Extreme Manufacturing 2024年第4期6卷 116-149页

作者： Ju Young lee Jeong Eun Ju Chanwoo lee Sang Min Won Ki jun Yu School of Electrical and Electronic Engineering Yonsei University50 Yonsei-roSeodaemunguSeoul 03722Republic of Korea Department of Electrical and Computer Engineering Sungkyunkwan UniversitySuwon 16419Republic of Korea YU-Korea Institute of Science and Technology(KIST)Institute Yonsei University50Yonsei-roSeodaemun-guSeoul 03722Republic of Korea

Flexible electronics offer a multitude of advantages,such as flexibility,lightweight property,portability,and high *** unique properties allow for seamless applications to curved and soft surfaces,leading to extensive utilization across a wide range of fields in consumer *** applications,for example,span integrated circuits,solar cells,batteries,wearable devices,bio-implants,soft robotics,and biomimetic ***,flexible electronic devices have been developed using a variety of materials such as organic,carbon-based,and inorganic semiconducting ***(Si)owing to its mature fabrication process,excellent electrical,optical,thermal properties,and cost efficiency,remains a compelling material choice for flexible ***,the research on ultra-thin Si in the context of flexible electronics is studied rigorously *** thinning of Si is crucially important for flexible electronics as it reduces its bending stiffness and the resultant bending strain,thereby enhancing flexibility while preserving its exceptional *** review provides a comprehensive overview of the recent efforts in the fabrication techniques for forming ultra-thin Si using top-down and bottom-up approaches and explores their utilization in flexible electronics and their applications.

关键词： flexible electronics silicon fabrication technique top-down approach bottom-up approach

Amorphous BaTiO_(3) Electron Transport Layer for Thermal Equilibrium-Governed γ-CsPbl_(3) Perovskite Solar Cell with High Power Conversion Efficiency of 19.96%

在线全文

学校读者我要写书评

暂无评论

Energy & Environmental Materials 2024年第3期7卷 291-302页

作者： Changhyun lee Chanyong lee Kyungjin Chae Taemin Kim Seaeun Park Yohan Ko Yongseok jun Department of Energy Environment Policy and Technology Graduate School of Energy and Environment(KU-KIST Green School)Korea UniversitySeoul 02841Republic of Korea Nano Electronic Materials and Components Research Center Gumi Electronics and Information Technology Research Institute(GERI)Gumi 39171Republic of Korea Energy Materials Research Center Clean Energy Research DivisionKorea Institute of Science and Technology(KIST)Seoul 02792Republic of Korea

Compared to organic-inorganic hybrid perovskites,the cesium-based allinorganic lead halide perovskite(CsPbI_(3))is a promising light absorber for perovskite solar cells owing to its higher resistance to thermal ***,additional research is required to reduce the nonradiative recombination to realize the full potential of CsPbI_(3).Here,the diffusion of Cs ions participating in ion exchange is proposed to be an important factor responsible for the bulk defects inγ-CsPbI_(3)*** based on first-principles density functional theory reveal that the[PbI_(6)]^(4-)octahedral tilt modifies the perovskite crystallographic properties inγ-CsPbI_(3),leading to alterations in its bandgap and crystal *** addition,by substituting amorphous barium titanium oxide(a-BaTiO_(3))for TiO_(2)as the electron transport layer,interfacial defects caused by imperfect energy levels between the electron transport layer and perovskite are ***-resolution transmission electron microscopy and electron energy loss spectroscopy demonstrate that a-BaTiO_(3)forms entirely as a single phase,as opposed to Ba-doped TiO_(2)hybrid nanoclusters or separate domains of TiO_(2)and BaTiO_(3)***,inorganic perovskite solar cells based on the a-BaTiO_(3)electron transport layer achieved a power conversion efficiency of 19.96%.

关键词： amorphous BaTiO_(3) electron transport layer moisture γ-CsPbI_(3)

Delphi study for developing a checklist of adverse events associated with acupotomy

在线全文

学校读者我要写书评

暂无评论

Journal of Integrative Medicine 2024年第5期22卷 579-587页

作者： Hyungsun jun Haebeom lee Sang-Hoon Yoon Chan-Young Kwon Damin Jeon jun-Hwan lee jungtae leem Department of Diagnostics College of Korean MedicineWonkwang UniversityIksan 54538Republic of Korea Days Inc. Seoul 06247Republic of Korea Chung-Yeon Korean Medicine Clinic Seoul 06224Republic of Korea Department of Oriental Neuropsychiatry Dong-Eui University College of Korean MedicineBusan 47227Republic of Korea Chonnam National University Hwasun Hospital Hwasun 58128Republic of Korea KM Science Research Division Korea Institute of Oriental MedicineDaejeon 34054Republic of Korea Department of Korean Convergence Medical Science KIOM SchoolUniversity of Science&Technology(UST)Daejeon 34054Republic of Korea Department of Physical Medicine and Rehabilitation Spaulding Rehabilitation HospitalHarvard Medical SchoolBostonMA 02115USA Research Center of Traditional Korean Medicine College of Korean MedicineWonkwang UniversityIksan 54538Republic of Korea

Background Acupotomy,a more invasive procedure than acupuncture,involves the use of a thicker needle with an integrated knife at the tip,necessitating safety *** aimed to define relevant adverse events(AEs)and create a standardized form of the ACUPOtomy-related AEs CHECKlist(ACUPOCHECK).Methods Before conducting the Delphi process,a systematic review and pilot prospective study were conducted to gather information on previously reported *** these data,pilot versions of the ACUPOCHECK and Delphi questionnaires were *** Delphi questionnaire involved selecting types of AE for inclusion,establishing separate criteria for acupotomy-related AEs,and achieving a consensus on AE *** Korean doctors with experience in acupotomy or AE research were recruited to participate in each Delphi *** was considered to have been reached if the critical value for the content validity ratio met or exceeded *** The final ACUPOCHECK was developed using four rounds of the Delphi method and one face-to-face consensus *** included 12 local AEs(pain,hemorrhage,bruise,hematoma,edema,pruritus,rash,infection,nerve damage,dysesthesia,movement impairment,and pneumothorax)and 14 systemic AEs(disease aggravation,needle fatigue,sleepiness,procedural nausea,procedural vomiting,procedural headache,procedural dizziness,sweating,procedural shock,syncope,dyspnea,procedural pain,sleep disorder,and postprocedural infection).Separate criteria were established for pain,hemorrhage and bruising:pain was defined as pain that occurrs during daily activities and persists for longer than 72 h,hemorrhage as bleeding that continues for≥3 min despite pressure application,and bruising as having a bruise with a diameter of≥3 ***-ended descriptions were allowed for AEs not covered by the checklist,and severity and causality were assessed using the Common Terminology Criteria for Adverse Events and modified World Health Organization-Uppsala Monitoring C

关键词： Acupotomy Delphi technique Patient safety Safety management Adverse event