检索结果-南通市图书馆

Progress and challenges for replacing n-methyl-2-pyrrolidone/polyvinylidene fluoride slurry formulations in lithium-ion battery cathodes

在线全文

学校读者我要写书评

暂无评论

Progress in Natural Science:Materials International 2024年第1期34卷 194-206页

作者： sung Cik mun Yeong Hoon Jeon Jong Ho Won Battery Materials Research Center LG Chem Department of Energy Engineering Dankook University

With electric vehicles, energy storage systems, and portable electronic devices becoming increasingly popular, the demand for lithium-ion batteries has surged considerably. In the lithium-ion battery industry, n-methyl-2-pyrrolidone(NMP) is widely used as the solvent for cathode slurry, and polyvinylidene fluoride(PVDF) is used as the cathode binder. However, because of the harmful effect of NMP on the environment and human health, the use of NMP and PVDF for lithium-ion batteries will be highly regulated in the future. Therefore, developing eco-friendly alternatives is crucial for formulating systems using new solvents and binders. Despite numerous efforts, these alternatives have not been widely adopted across the lithium-ion battery industry. It is due to their limited ability to compete on price or performance to replace the traditional NMP/PVDF slurry formulations. This review investigates developments in the search for new solvents and binders that can be used in cathode slurry compositions. The new systems can potentially decrease energy consumption and manufacturing costs associated with NMP recovery, energy-intensive drying processes, and material expenses. We discuss key factors and technical challenges from earlier studies and compare them with the current, optimized formulations based on NMP and PVDF.

关键词： Lithium-ion battery Eco-friendly alternative Slurry formulation Chemical regulation Binder performance

Effect of characteristics and distribution of Mg_(17)Al_(12)precipitates on tensile and bending properties of high-Al-containing Mg alloys

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第2期12卷 779-793页

作者： Sumi Jo Gyo Myeong lee Jong Un lee Young Min Kim sung Hyuk Park School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Department of Magnesium Korea Institute of Materials ScienceChangwon 51508Republic of Korea

This study investigates the effect of characteristics and distribution of Mg_(17)Al_(12)precipitates on the uniaxial tensile and three-point bending properties of extruded Mg alloys containing high Al *** extruded Mg–9Al–1Zn–0.3Mn(AZ91)alloy contains lamellar-structured Mg_(17)Al_(12)discontinuous precipitates along the grain boundaries,which are formed via static precipitation during natural air *** extruded Mg–11Al–1Zn–0.3Mn(AZ111)alloy contains spherical Mg_(17)Al_(12)precipitates at the grain boundaries and inside the grains,which are formed via dynamic precipitation during *** to inhomogeneous distribution of precipitates,the AZ111 alloy consists of two different precipitate regions:precipitate-rich region with numerous precipitates and finer grains and precipitate-scarce region with a few precipitates and coarser *** AZ111 alloy exhibits a higher tensile strength than the AZ91 alloy because its smaller grain size and more abundant precipitates result in stronger grain-boundary hardening and precipitation hardening effects,***,the tensile elongation of the AZ111 alloy is lower than that of the AZ91 alloy because the weak cohesion between the dynamic precipitates and the matrix facilitates the crack initiation and *** bending,a macrocrack initiates on the outer surface of bending specimen in both *** AZ111 alloy exhibits higher bending yield strength and lower failure bending strain than the AZ91 *** bending specimens of the AZ91 alloy have similar bending formability,whereas those of the AZ111 alloy exhibit considerable differences in bending formability and crack propagation behavior,depending on the distribution and number density of precipitates in the *** bending specimens of the AZ111 alloy,it is found that the failure bending strain(ε_(f,bending))is inversely proportional to the area fraction of precipitates in the outer zone of bending specimen(A_(ppt)),with a relation

关键词： Mg–Al alloy Extrusion Bending Precipitation Microstructure

Enhanced prediction of anisotropic deformation behavior using machine learning with data augmentation

在线全文

学校读者我要写书评

暂无评论

Journal of Magnesium and Alloys 2024年第1期12卷 186-196页

作者： Sujeong Byun Jinyeong Yu Seho Cheon Seong Ho lee sung Hyuk Park Taekyung lee School of Mechanical Engineering Pusan National UniversityBusan 46241South Korea School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566South Korea

Mg alloys possess an inherent plastic anisotropy owing to the selective activation of deformation mechanisms depending on the loading *** characteristic results in a diverse range of flow curves that vary with a deformation *** study proposes a novel approach for accurately predicting an anisotropic deformation behavior of wrought Mg alloys using machine learning(ML)with data *** developed model combines four key strategies from data science:learning the entire flow curves,generative adversarial networks(GAN),algorithm-driven hyperparameter tuning,and gated recurrent unit(GRU)*** proposed model,namely GAN-aided GRU,was extensively evaluated for various predictive scenarios,such as interpolation,extrapolation,and a limited dataset *** model exhibited significant predictability and improved generalizability for estimating the anisotropic compressive behavior of ZK60 Mg alloys under 11 annealing conditions and for three loading *** GAN-aided GRU results were superior to those of previous ML models and constitutive *** superior performance was attributed to hyperparameter optimization,GAN-based data augmentation,and the inherent predictivity of the GRU for *** a first attempt to employ ML techniques other than artificial neural networks,this study proposes a novel perspective on predicting the anisotropic deformation behaviors of wrought Mg alloys.

关键词： Plastic anisotropy Compression Annealing Machine learning Data augmentation

Comparison of commercial silicon-based anode materials for the design of a high-energy lithium-ion battery

在线全文

学校读者我要写书评

暂无评论

Nano Research 2024年第6期17卷 5270-5277页

作者： Minhong Choi Eunhan lee Jaekyung sung Namhyung Kim Minseong Ko Division of Convergence Materials Engineering Pukyong National UniversityBusan 48547Republic of Korea Department of Materials Engineering and Convergence Technology Gyeongsang National University501 Jinju-daeroJinju 52828Republic of Korea Department of Materials System Engineering Pukyong National UniversityBusan 48547Republic of Korea

Silicon(Si)is considered a potential alternative anode for next-generation Li-ion batteries owing to its high theoretical capacity and ***,the commercial use of Si anodes is hindered by their large volume expansion(~300%).Numerous efforts have been made to address this *** these efforts,Si-graphite co-utilization has attracted attention as a reasonable alternative for high-energy anodes.A comparative study of representative commercial Si-based materials,such as Si nanoparticles,Si suboxides,and Si−Graphite composites(SiGC),was conducted to characterize their overall performance in high-energy lithium-ion battery(LIB)design by incorporating conventional ***-Si was found to exhibit poor electrochemical performance,with severe volume expansion during *** suboxide provided excellent cycling stability in a full-cell evaluation with stable volume variation after 50 cycles,but had a large irreversible capacity and remarkable volume expansion during the first *** displayed a good initial Coulombic efficiency and the lowest volume change in the first cycle owing to the uniformly distributed nano-Si layer on graphite;however,its long-term cycling stability was relatively *** complement each disadvantage of Si suboxide and SiGC,a new combination of these Si-based anodes was suggested and a reasonable improvement in overall battery performance was successfully achieved.

关键词： silicon-based anode high-energy comparison lithium ion battery blended electrode

Strengthening mechanisms analysis and tailoring of bimodal grain structures for enhanced strength in CoCrFeMnNi high-entropy alloys

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Rare Metals 2024年第8期43卷 3893-3903页

作者： Jaesoung lee Seulgi Kim Taehyun Kwon Young II Kim Suyeon Kim sung Ho Song Bin lee Dongju lee Department of Urban Energyand Environmental EngineeringChungbuk National UniversityCheongju 28644Republic of Korea Division of Advanced Materials Engineering Kongju National UniversityChungnam 330-717Republic of Korea Department of Advanced Materials Engineering for Information and Electronics Integrated-Education Institute for Frontier Science and Technology(BK21 Four)Kyung Hee UniversityYongin17104Republic of Korea

The CoCrFeMnNi high-entropy alloys(HEAs)with a(face-centered cubic) FCC structure has garnered considerable attention for its exceptional ductility and strain hardening ***,its yield strength is insufficient for structural *** this study,strengthening mechanisms in these HEAs were investigated to gain insight into the mechanical properties according to alloy powder ***,we present a novel approach to achieve both high strength and high ductility through the creation of a bimodal structure consisting of both coarse and fine grains via gas atomization and spark plasma sintering processes.A bimodally structured HEA prepared with a mass ratio of 2:8 between coarse particles(75-106 μm) and fine particles(≤25 μm)yielded optimal results,with a strength of 491.95 MPa and elongation of 19.64%.This strength value represents an~41% increase compared with the sample that displayed a fine single microstructure(347.08 MPa for yield strength).The strength enhancement was attributed to the prevention of plastic deformation initiation from the fine particles during *** innovative approach to the creation of HEAs with bimodal structures shows promise for various applications,such as structural components that require a combination of high strength and high ductility.

关键词： High-entropy alloys CrCoFeMoNi Bimodal Gas atomization Mechanical properties

Stable immobilization of lithium polysulfides using three-dimensional ordered mesoporous Mn_(2)O_(3) as the host material in lithium-sulfur batteries

在线全文

学校读者我要写书评

暂无评论

Carbon Energy 2024年第6期6卷 99-112页

作者： sung Joon Park Yun Jeong Choi Hyun-seung Kim Min Joo Hong Hongjun Chang Janghyuk Moon Young-Jun Kim Junyoung mun Ki Jae Kim Department of Energy Science Sungkyunkwan UniversitySuwonGyeonggi-doRepublic of Korea Department of Energy Engineering Konkuk UniversitySeoulRepublic of Korea Advanced Batteries Research Center Korea Electronic Technology InstituteSeongnamRepublic of Korea Department of Future Energy Engineering Sungkyunkwan UniversitySuwonRepublic of Korea Department of Energy Systems Engineering Chung-Ang UniversitySeoulRepublic of Korea SKKU Advanced Institute of Nanotechnology Sungkyunkwan UniversitySuwonGyeonggi-doRepublic of Korea SKKU Institute of Energy Science and Technology(SIEST) Sungkyunkwan UniversitySuwonRepublic of Korea School of Advanced Materials Science and Engineering Sungkyunkwan UniversitySuwonRepublic of Korea

Lithium-sulfur batteries(LSBs)have drawn significant attention owing to their high theoretical discharge capacity and energy ***,the dissolution of long-chain polysulfides into the electrolyte during the charge and discharge process(“shuttle effect”)results in fast capacity fading and inferior electrochemical *** this study,Mn_(2)O_(3)with an ordered mesoporous structure(OM-Mn_(2)O_(3))was designed as a cathode host for LSBs via KIT-6 hard templating,to effectively inhibit the polysulfide shuttle ***-Mn_(2)O_(3)offers numerous pores to confine sulfur and tightly anchor the dissolved polysulfides through the combined effects of strong polar-polar interactions,polysulfides,and sulfur chain *** OM-Mn_(2)O_(3)/S composite electrode delivered a discharge capacity of 561 mAh g^(-1) after 250 cycles at 0.5 C owing to the excellent performance of OM-Mn_(2)O_(3).Furthermore,it retained a discharge capacity of 628mA h g^(-1) even at a rate of 2 C,which was significantly higher than that of a pristine sulfur electrode(206mA h g^(-1)).These findings provide a prospective strategy for designing cathode materials for high-performance LSBs.

关键词： host material lithium-sulfur battery ordered mesoporous structure shuttle effect transition-metal oxides

Ionizing terahertz waves with 260 MV/cm from scalable optical rectification

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Light(Science & Applications) 2024年第6期13卷 1075-1087页

作者： Hyeongmun Kim Chul Kang Dogeun Jang Yulan Roh Sang Hwa lee Joong Wook lee Jae Hee sung Seong Ku lee Ki-Yong Kim Advanced Photonics Research Institute GISTGwangju61005Korea Department of Physics and Optoelectronics Convergence Research Center Chonnam National UniversityGwangju61186Korea Pohang Accelerator Laboratory POSTECHPohang37673Korea Center for Relativistic Laser Science Institute for Basic ScienceGwangju61005Korea Institute for Research in Electronics and Applied Physics Department of PhysicsUniversity of MarylandCollege ParkMaryland20742USA

Terahertz(THz)waves,known as non-ionizing radiation owing to their low photon energies,can actually ionize atoms and molecules when a sufficiently large number of THz photons are concentrated in time and ***,we demonstrate the generation of ionizing,multicycle,15-THz waves emitted from large-area lithium niobate crystals via phase-matched optical rectification of 150-terawatt laser pulses.A complete characterization of the generated THz waves in energy,pulse duration,and focal spot size shows that the field strength can reach up to 260 megavolts per *** particular,a single-shot THz interferometer is employed to measure the THz pulse duration and spectrum with complementary numerical *** intense THz pulses are irradiated onto various solid targets to demonstrate THz-induced tunneling ionization and plasma *** study also discusses the potential of nonperturbative THz-driven ionization in gases,which will open up new opportunities,including nonlinear and relativistic THz physics in plasma.

关键词： optical interferometer matched

Intelligent reflecting surface for sum rate enhancement in MIMO systems

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Digital Communications and Networks 2024年第1期10卷 94-100页

作者： Chan-Yeob Park Ji-sung Jung Yeong-Rong lee Beom-Sik Shin Hyoung-Kyu Song Department of Information and Communication Engineering Sejong UniversitySeoulGwangjin-guGunja-dong 98Republic of Korea Department of Convergence Engineering for Intelligent Drone Sejong University SeoulGwangjin-guGunja-dong 98Republic of Korea

The research for the Intelligent Reflecting Surface(IRS)which has the advantages of cost and energy efficiency has been *** capacity can be effectively increased by appropriately setting the phase value of IRS elements according to the channel ***,the problem of obtaining an appropriate phase value of IRs is difficult to solve due to the non-convex *** paper proposes an iterative algorithm for the alternating optimal solution in the Single User Multiple-Input-Multiple-Output(SU-MIMO)*** proposed iterative algorithm finds an alternating optimal solution that is the phase value of IRS one by *** results show that the proposed method has better performance than that of the randomized IRS *** number of iterations for maximizing the performance of the proposed algorithm depends on the channel state between the IRS and the receiver.

关键词： Intelligent reflecting surface MIMO Sum rate

Enhancement of vertical phase separation in sequentially deposited organic photovoltaics through the independent processing of additives

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Energy Chemistry 2024年第7期94卷 768-777页

作者： Damin lee Changwoo Park Gayoung Ham Young Yong Kim sung-Nam Kwon Junyeong lee sungjin Jo Seok-In Na Hyojung Cha Department of Hydrogen and Renewable Energy Kyungpook National UniversityDaegu 41566Republic of Korea Department of Energy Convergence and Climate Change Kyungpook National UniversityDaegu 41566Republic of Korea Pohang Accelerator Laboratory(PAL) Pohang University of Science and Technology(POSTECH)PohangGyeongbuk 37673Republic of Korea Department of Flexible and Printable Electronics Jeonbuk National UniversityJeonju-siJeollabuk-do 54896Republic of Korea School of Energy Engineering Kyungpook National UniversityDaegu 41566Republic of Korea

Herein,the impact of the independent control of processing additives on vertical phase separation in sequentially deposited (SD) organic photovoltaics (OPVs) and its subsequent effects on charge carrier kinetics at the electron donor-acceptor interface are *** film morphology exhibits notable variations,significantly depending on the layer to which 1,8-diiodooctane (DIO) was *** incidence wide-angle X-ray scattering analysis reveals distinctly separated donor/acceptor phases and vertical crystallinity details in SD ***-of-flight secondary ion mass spectrometry analysis is employed to obtain component distributions in diverse vertical phase structures of SD films depending on additive *** addition,nanosecond transient absorption spectroscopy shows that DIO control significantly affects the dynamics of separated charges in SD *** SD OPVs,DIO appears to act through distinct mechanisms with minimal restriction,depending on the applied *** study emphasizes the significance of morphological optimization in improving device performance and underscores the importance of independent additive control in the advancement of OPV technology.

关键词： Sequential deposition Vertical phase separation Charge dynamics Organic photovoltaics Nonfullerene acceptors