检索结果-南通市图书馆

Revealing the influence of in-situ formed LiCl on garnet/Li interface for dendrite-free solid-state batteries

Journal of Energy Chemistry 2024年第5期92卷 394-403页

作者： Seoyoon Shin Jinuk lee Tae ho Shin Seokhee lee Hydrogen Energy Materials Center Korea Institute of Ceramic Engineering&TechnologyJinju-siGyeongsangnam-do 52851Republic of Korea Department of Materials Science and Engineering Yonsei UniversitySeoul 03722Republic of Korea

Inadequate interfacial contact between lithium and solid-state electrolytes(SSEs)leads to elevated impedance and the growth of lithium dendrites,presenting significant obstacles to the practical viability of solid-state batteries(SSBs).To ameliorate interfacial contact,optimizing the surface treatment of SSEs has been widely ***,the formation of LiCl through acid treatment,an equally crucial factor impacting SSB performance,has received limited attention,leaving its underlying mechanism *** study aims to shed light on SSE characteristics following LiCl formation and the removal of Li_(2)CO_(3) through acid *** seek to establish quantifiable links between SSE surface structure and SSB performance,focusing on interfacial resistance,current distribution,critical current density(CCD),and lithium *** formation of LiCl,occurring as Li_(2)CO_(3) is removed through acid treatment,effectively mitigates lithium dendrite formation on SSE *** action inhibits electron injection and reduces the diffusion rate of Li ***,acid treatment transforms the SSE surface into a lithiophilic state by eliminating surface Li_(2)CO_(3).Consequently,the interfacial resistance between lithium and SSEs substantially decreases from 487.67 to 35.99Ωcm^(2) at 25°*** leads to a notably high CCD of 1.3 mA cm^(-2) and a significantly extended cycle life of 1,000 ***,in full SSBs incorporating LiCoO_(2)cathodes and acid-treated garnet SSEs,we observe exceptional cyclability and rate *** findings highlight that acid treatment not only establishes a fundamental relationship between SSE surfaces and battery performance but also offers an effective strategy for addressing interfacial challenges in SSBs.

关键词： Solid-statebatteries Acidtreatment Interfacial stability LiCl Surface modification

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

The association between C-reactive protein to albumin ratio and 6-month neurological outcome in patients with in-hospital cardiac arrest

引用

World Journal of Emergency Medicine 2024年第3期15卷 223-228页

作者： Ji ho lee Dong Hun lee Byung Kook lee Seok Jin Ryu Department of Emergency Medicine Chonnam National University HospitalGwangju 61469Republic of Korea Department of Emergency Medicine Chonnam National University Medical SchoolGwangju 61469Republic of Korea

The global incidence rates of in-hospital cardiac arrest(IHCA)range from1.2 to 9.0 per1,000 hospitalized patients,as per the National Cardiac Arrest Database.[1] While IHCAs tend to exhibit superior 30-day survival rates relative to out-of-hospital cardiac arrests (OHCA) due to situational advantages,such as immediate access to medical personnel and treatments.

关键词： patients cardiac IHC

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Development of vehicle-recognition method on water surfaces using LiDAR data:SPD^(2)(spherically stratified point projection with diameter and distance)

引用

Defence Technology（防务技术） 2024年第6期36卷 95-104页

作者： Eon-ho lee Hyeon Jun Jeon Jinwoo Choi Hyun-Taek Choi Sejin lee The Department of Mechanical Engineering Kongju National University1223-24 Cheonan-daeroCheonan 31080Republic of Korea Ocean System Engineering Research Division Korea Research Institute of Ships and Ocean Engineering(KRISO)Daejeon 34103Republic of Korea The Division of Mechanical&Automotive Engineering Kongju National University1223-24 Cheonan-daeroCheonan 31080Republic of Korea

Swarm robot systems are an important application of autonomous unmanned surface vehicles on water *** monitoring natural environments and conducting security activities within a certain range using a surface vehicle,the swarm robot system is more efficient than the operation of a single object as the former can reduce cost and save *** is necessary to detect adjacent surface obstacles robustly to operate a cluster of unmanned surface *** this purpose,a LiDAR(light detection and ranging)sensor is used as it can simultaneously obtain 3D information for all directions,relatively robustly and accurately,irrespective of the surrounding environmental *** the GPS(global-positioning-system)error range exists,obtaining measurements of the surface-vessel position can still ensure stability during platoon *** this study,a three-layer convolutional neural network is applied to classify types of surface *** aim of this approach is to redefine the sparse 3D point cloud data as 2D image data with a connotative meaning and subsequently utilize this transformed data for object classification ***,we have proposed a descriptor that converts the 3D point cloud data into 2D image *** use this descriptor effectively,it is necessary to perform a clustering operation that separates the point clouds for each *** developed voxel-based clustering for the point cloud ***,using the descriptor,3D point cloud data can be converted into a 2D feature image,and the converted 2D image is provided as an input value to the *** intend to verify the validity of the proposed 3D point cloud feature descriptor by using experimental data in the ***,we explore the feasibility of real-time object classification within this framework.

关键词： Object classification Clustering 3D point cloud data LiDAR(light detection and ranging) Surface vehicle

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Construction of a High‑Performance Composite Solid Electrolyte Through In‑Situ Polymerization within a Self‑Supported Porous Garnet Framework

引用

Nano-Micro Letters 2024年第5期16卷 56-70页

作者： An‑Giang Nguyen Min‑ho lee Jaekook Kim Chan‑Jin Park Department of Materials Science and Engineering Chonnam National University77 Yongbong‑roBuk‑guGwangju 61186South Korea

Composite solid electrolytes(CSEs)have emerged as promising candidates for safe and high-energy–density solid-state lithium metal batteries(SSLMBs).however,concurrently achieving exceptional ionic conductivity and interface compatibility between the electrolyte and electrode presents a significant challenge in the development of high-performance CSEs for *** overcome these challenges,we present a method involving the in-situ polymerization of a monomer within a self-supported porous Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZT)to produce the *** synergy of the continuous conductive LLZT network,well-organized polymer,and their interface can enhance the ionic conductivity of the CSE at room ***,the in-situ polymerization process can also con-struct the integration and compatibility of the solid electrolyte–solid electrode *** synthesized CSE exhibited a high ionic conductivity of 1.117 mS cm^(-1),a significant lithium transference number of 0.627,and exhibited electrochemical stability up to 5.06 V ***/Li+at 30℃.Moreover,the Li|CSE|LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) cell delivered a discharge capacity of 105.1 mAh g^(-1) after 400 cycles at 0.5 C and 30℃,corresponding to a capacity retention of 61%.This methodology could be extended to a variety of ceramic,polymer electrolytes,or battery systems,thereby offering a viable strategy to improve the electrochemical properties of CSEs for high-energy–density SSLMBs.

关键词： Scalable tape-casting method Self-supported porous Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12) Composite solid electrolyte LiF-and B-rich interphase layers

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

CD200Rhigghh neutrophils with dysfunctional autophagy establish systemic immunosuppression by increasing regulatory T cells

引用

Cellular & Molecular Immunology 2024年第4期21卷 349-361页

作者： Ye Seon Kim Yu sun Jeong Geon ho Bae Ji Hyeon Kang Mingyu lee Brian A.Zabel Yoe-Sik Bae Department of Biological Sciences Sungkyunkwan UniversitySuwon16419Republic of Korea Department of Health Science and Technology SAIHSTSungkyunkwan UniversitySeoul06351Republic of Korea Palo Alto Veterans Institute for Research Veterans Affairs HospitalPalo AltoCA94304USA

Distinct neutrophil populations arise during certain pathological *** generation of dysfunctional neutrophils during sepsis and their contribution to septicemia-related systemic immune suppression remain *** this study,using an experimental sepsis model that features immunosuppression,we identified a novel population of pathogenic CD200R^(high) neutrophils that are generated during the initial stages of sepsis and contribute to systemic immune suppression by enhancing regulatory T(T_(reg))*** to their CD200R^(low)counterparts,sepsis-generated CD200Rhigh neutrophils exhibit impaired autophagy and dysfunction,with reduced chemotactic migration,superoxide anion production,and TNF-α*** soluble CD200 blocks autophagy and neutrophil maturation in the bone marrow during experimental sepsis,and recombinant CD200 treatment in vitro can induce neutrophil dysfunction similar to that observed in CD200R^(high) *** administration of anα-CD200R antibody effectively reversed neutrophil dysfunction by enhancing autophagy and protecting against a secondary infection challenge,leading to increased *** analysis revealed that CD200R^(high) neutrophils expressed high levels of Igf1,which elicits the generation of Treg cells,while the administration of anα-CD200R antibody inhibited Treg cell generation in a secondary infection *** together,our findings revealed a novel CD200R^(high) neutrophil population that mediates the pathogenesis of sepsis-induced systemic immunosuppression by generating Treg cells.

关键词： Sepsis Neutrophils CD200R Autophagy IGF-1 Regulatory T cells

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

A novel method for determining the resistivity of compressed superconducting materials

引用

Matter and Radiation at Extremes 2024年第4期9卷 1-3页

作者： Liling sun Qi Wu Shu Cai Yang Ding ho-kwang Mao Center for High Pressure Science and Technology Advanced Research Beijing 100094China Institute of Physics Chinese Academy of SciencesBeijing 100190China

The measurement of resistivity in a compressed material within a diamond anvil cell presents significant *** high-pressure exper-imental setup makes it difficult to directly measure the size changes induced by pressure in the three crystallographic directions of the *** this study,we introduce a novel and effective method that addresses these technical *** method is anticipated to offer a valuable foundation for high-pressure investigations on quantum materials,particularly those with anisotropic layered structures.

关键词： resistivity method foundation

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Enhanced prediction of anisotropic deformation behavior using machine learning with data augmentation

引用

Journal of Magnesium and Alloys 2024年第1期12卷 186-196页

作者： Sujeong Byun Jinyeong Yu Seho Cheon Seong ho lee sung Hyuk Park Taekyung lee School of Mechanical Engineering Pusan National UniversityBusan 46241South Korea School of Materials Science and Engineering Kyungpook National UniversityDaegu 41566South Korea

Mg alloys possess an inherent plastic anisotropy owing to the selective activation of deformation mechanisms depending on the loading *** characteristic results in a diverse range of flow curves that vary with a deformation *** study proposes a novel approach for accurately predicting an anisotropic deformation behavior of wrought Mg alloys using machine learning(ML)with data *** developed model combines four key strategies from data science:learning the entire flow curves,generative adversarial networks(GAN),algorithm-driven hyperparameter tuning,and gated recurrent unit(GRU)*** proposed model,namely GAN-aided GRU,was extensively evaluated for various predictive scenarios,such as interpolation,extrapolation,and a limited dataset *** model exhibited significant predictability and improved generalizability for estimating the anisotropic compressive behavior of ZK60 Mg alloys under 11 annealing conditions and for three loading *** GAN-aided GRU results were superior to those of previous ML models and constitutive *** superior performance was attributed to hyperparameter optimization,GAN-based data augmentation,and the inherent predictivity of the GRU for *** a first attempt to employ ML techniques other than artificial neural networks,this study proposes a novel perspective on predicting the anisotropic deformation behaviors of wrought Mg alloys.

关键词： Plastic anisotropy Compression Annealing Machine learning Data augmentation

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Strengthening mechanisms analysis and tailoring of bimodal grain structures for enhanced strength in CoCrFeMnNi high-entropy alloys

引用

Rare Metals 2024年第8期43卷 3893-3903页

作者： Jaesoung lee Seulgi Kim Taehyun Kwon Young II Kim Suyeon Kim sung ho Song Bin lee Dongju lee Department of Urban Energyand Environmental Engineering Chungbuk National University Division of Advanced Materials Engineering Kongju National University Department of Advanced Materials Engineering for Information and Electronics Integrated-Education Institute for Frontier Science and Technology (BK21 Four)Kyung Hee University

The CoCrFeMnNi high-entropy alloys(HEAs)with a(face-centered cubic) FCC structure has garnered considerable attention for its exceptional ductility and strain hardening ***,its yield strength is insufficient for structural *** this study,strengthening mechanisms in these HEAs were investigated to gain insight into the mechanical properties according to alloy powder ***,we present a novel approach to achieve both high strength and high ductility through the creation of a bimodal structure consisting of both coarse and fine grains via gas atomization and spark plasma sintering processes.A bimodally structured HEA prepared with a mass ratio of 2:8 between coarse particles(75-106 μm) and fine particles(≤25 μm)yielded optimal results,with a strength of 491.95 MPa and elongation of 19.64%.This strength value represents an～41% increase compared with the sample that displayed a fine single microstructure(347.08 MPa for yield strength).The strength enhancement was attributed to the prevention of plastic deformation initiation from the fine particles during *** innovative approach to the creation of HEAs with bimodal structures shows promise for various applications,such as structural components that require a combination of high strength and high ductility.

关键词： High-entropy alloys CrCoFeMoNi Bimodal Gas atomization Mechanical properties

来源：

同方期刊数据库评论

在线全文

同方期刊数据库

学校读者我要写书评

暂无评论

Chemical and mechanical properties of stainless, environment-friendly, and nonflammable Mg alloys (SEN alloys): A review

引用

Journal of Magnesium and Alloys 2024年第3期12卷 841-872页

作者： Jong Un lee Hyun Ji Kim Sang-Cheol Jin Ye Jin Kim Young Min Kim Bong sun You Jun ho Bae sung Hyuk Park Advanced Metals Division Korea Institute of Materials ScienceChangwon 51508Republic of Korea Department of Materials Science and Metallurgical Engineering Kyungpook National UniversityDaegu 41566Republic of Korea Missile Research Institute Agency for Defense DevelopmentDaejeon 34060Republic of Korea

This review article provides overall understanding of stainless,environment-friendly,and nonflammable Mg alloys(SEN alloys)recently developed at the Korea Institute of Materials *** alloys are produced by adding small amounts of Ca and Y(eachhose of commercial AZ91 alloys.(5)Simultaneous introduction of Ca and Y suppresses the formation of Mg17Al12 discontinuous precipitates during aging,leading to the enhanced elongation of aged SEN alloys.(6)Adding mischmetal into the SEN9 alloy leads to a six-fold enhancement in ***,the studies conducted on SEN alloys demonstrate their excellent ignition and corrosion resistances and mechanical properties,which broaden the industrial applications of Mg alloys by addressing their inherent weaknesses.

关键词： SEN magnesium alloy Corrosion resistance Ignition resistance Mechanical properties Extrudability.

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Characterization of a smog chamber for studying formation of gas-phase products and secondary organic aerosol

引用

Journal of Environmental Sciences 2024年第2期136卷 570-582页

作者： Qi Yuan Zhuozhi Zhang Meng Wang Kin Fai ho Tao Wang Shuncheng lee Department of Civil and Environmental Engineering The Hong Kong Polytechnic UniversityKowloonHong KongChina School of Public Health and Primary Care The Chinese University of Hong KongShatinHong KongChina

Smog chambers provide a potent approach to explore the secondary organic aerosol formation under varied *** study describes the construction and characterization of a new smog chamber facility for studying the formation mechanisms of gas-phase products and secondary organic aerosol from the photooxidation of volatile organic *** chamber is a 5.4 m^(3) Fluorinated Ethylene Propylene(FEP)Teflon reactor with the potential to perform photooxidation experiments at controlled temperature and relative *** characterizations were conducted for evaluation of stability of environmental parameters,mixing time,background contamination,light intensity,and wall losses of gases and *** photolysis rate of NO_(2)(J_(NO2))ranged from(1.02-3.32)×10^(-3)sec^(-1),comparable to the average J_(NO2)in ambient *** wall loss rates for NO,NO_(2),and O_(3)were 0.47×10^(-4),0.37×10^(-4),and 1.17×10^(-4)min^(-1),while wall loss of toluene was obsoletely found in a 6 hr *** particle number wall loss rates are(0.01-2.46)×10^(-3)min^(-1)for 40-350 nm with an average lifetime of more than one day.A series of toluene photooxidation experiments were carried out in absence of NO_xunder dry *** results of the simulation experiments demonstrated that the chamber is well designed to simulate photolysis progress in the atmosphere.

关键词： Smog chamber Gas-phase oxidation Chamber characterization Chemical mechanism

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：