检索结果-南通市图书馆

Recent developments in selective laser processes for wearable devices

Bio-Design and Manufacturing 2024年第4期7卷 517-547页

作者： Youngchan Kim Eunseung Hwang chang Kai Kaichen Xu Heng Pan Sukjoon Hong Optical Nanoprocessing Lab Department of Mechanical EngineeringBK21 FOUR ERICA-ACE CenterHanyang University55 Hanyangdaehak-RoSangnok-GuAnsan 15588Republic of Korea Multiscale Manufacturing Lab J.Mike Walker’66 Department of Mechanical EngineeringTexas A&M UniversityCollege StationTX 77843USA State Key Laboratory of Fluid Power and Mechatronic Systems School of Mechanical EngineeringZhejiang UniversityHangzhou 310058China

Recently,the increasing interest in wearable technology for personal healthcare and smart virtual/augmented reality applications has led to the development of facile fabrication *** have long been used to develop original solutions to such challenging technological problems due to their remote,sterile,rapid,and site-selective processing of *** this review,recent developments in relevant laser processes are summarized under two separate ***,transformative approaches,such as for laser-induced graphene,are *** addition to design optimization and the alteration of a native substrate,the latest advances under a transformative approach now enable more complex material compositions and multilayer device configurations through the simultaneous transformation of heterogeneous precursors,or the sequential addition of functional layers coupled with other electronic *** addition,the more conventional laser techniques,such as ablation,sintering,and synthesis,can still be used to enhance the functionality of an entire system through the expansion of applicable materials and the adoption of new ***,various wearable device components developed through the corresponding laser processes are discussed,with an emphasis on chemical/physical sensors and energy *** addition,special attention is given to applications that use multiple laser sources or processes,which lay the foundation for the all-laser fabrication of wearable devices.

关键词： Selective laser process Wearable device Transformative approach Laser-induced graphene Ablation Sintering Synthesis

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Loading capacity and emulsification phenomena of HREE extraction by dialkylphosphinic acids with different β,γ,δ-substituents

引用

Journal of Rare Earths 2024年第1期42卷 191-199,I0007页

作者： Junlian Wang Guodong Xu Wen Xu Jianguo Cui Yufu Chen Ziyong chang School of Civil and Resource Engineering University of Science and Technology BeijingBeijing100083China Key Laboratory of Ministry of Education for Efficient Mining and Safety of Metal Mines Beijing100083China State Key Laboratory of Baiyunobo Rare Earth Resource Researches and Comprehensive Utilization Baotou Research Institute of Rare EarthsBaotou014030China

The relationship between dialkylphosphinic acid structure and their loading capacity for HREEs and emulsification phenomena has rarely been *** this paper,we took Lu extraction as an example to study the effect of β,γ,δ-substituents of dialkylphosphinic acids on their loading capacity and anti-emulsification performance for *** discuss conveniently,the dialkylphosphinic acids were classified into two groups:β-substituent group(P208,INET-1,P218,USTB-1 and P227)and γ,δ-substituent group(P218,P2132 and Cyanex 272).For β-substituent group extractants,their loading capacities are in the order P208(299.7 mg/L)≈INET-1(299.5 mg/L)>P218(270.8 mg/L)>>USTB-1(163.1 mg/L)>P227(151.4 mg/L),while their anti-emulsification/gelation performances are just in the opposite order P227>USTB-1>P218>P208≈INET-1 under the studied *** γ,δ-substituent group extractants,their loading capacities are in the order P218(270.8 mg/L)>P2132(192.3 mg/L)>Cyanex272(131.7 mg/L),while the anti-emulsification performance of P218 is better than those of P2132 and Cyanex *** loading capacity data given in the parentheses are obtained through repeatedly extracting Lu from ~4×10^(-4)mol/L of Lu aqueous feed solution with initial pH of 2.40 by 0.01 mol/L extractant at phase ratio A/O of 1:1.

关键词： Heavy rare earth element Dialkylphosphinic acid Extraction Loading capacity Emulsification

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Broadband absorption performance of 3D-printed polyetheretherketone-based electromagnetic wave-absorbing composites

引用

Chinese Journal of Aeronautics 2024年第8期37卷 547-558页

作者： Lin BAI Nan chang Meiying ZHAO Chi HOU Yi CAO Dichen LI School of Aeronautics Northwestern Polytechnical UniversityXi’an 710072China Chengdu Aircraft Design and Research Institute Chengdu 610091China Xi’an Key Laboratory of Advanced Structure Design and Application of Aircraft Northwestern Polytechnical UniversityXi’an 710072China State Key Laboratory for Manufacturing System Engineering Xi’an Jiaotong UniversityXi’an 710054China

The rapid development of additive manufacturing technology has offered a new avenue for designing and fabricating high wave-absorbing meta *** this study,the mechanical properties and broadband absorption performance of Poly-Ether-Ether-Ketone(PEEK)–based electromagnetic wave–absorbing composite materials was *** high-performance polymer PEEK was used as the matrix,and the materials with electromagnetic wave loss,such as reduced graphene oxide,Carbonyl Iron(CI),and Flake CI(FCI),were used as *** on the theory of impedance matching,a wave-absorbing structure with a gradual impedance gradient was designed and *** test results showed that at the 2.0–18.0 GHz frequency band,the coverage rate of the effective absorption bandwidth was up to 72.0%,the average optimal reflectivity was–18.09 dB,and the wide-angle absorption range was 0°–30°.The advantages of additive manufacturing technology in designing and fabricating wave-absorbing structures are presented,demonstrating that the technology is an effective method for creating broadband absorbing structures.

关键词： Absorption performance Additive manufacturing Electromagnetic absorption PEEK composite materials Gradual structure Broadband absorption

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Cross-linkedα-amylase aggregates on Fe3O4 magnetic nanoparticles modified with polydopamine/polyethyleneimine for efficient hydrolysis of starch

引用

Particuology 2024年第7期90卷 98-105页

作者： Jiandong Cui Xiuming Tang Qingqing Ma Yuyan chang Qunli Zhang Shiru Jia State Key Laboratory of Food Nutrition and Safety Laboratory of Industrial Fermentation MicrobiologyMinistry of EducationTianjin University of Science and TechnologyTianjin 300457China Key Laboratory of Biomass Chemical Engineering of Ministry of Education Zhejiang UniversityHangzhou 310027China

In this workα-amylase was immobilized on magnetic Fe3O4 nanoparticles with polyethylenimine(PEI)/polydopamine(PDA)coating or 3-aminopropyl triethoxysilane(APTES)for the first time via adsorption–precipitation–*** with the freeα-amylase,the resultant magnetic cross-linkedα-amylase aggregates(PEI/PDA-M-CLEAs and N-M-CLEAs)exhibited excellent thermal and storage stability as well as pH *** storage at 25°C for 60 days,freeα-amylase only retained 60%of its initial activity,while PEI/PDA-M-CLEAs and N-M-CLEAs retained 80%and 78%of their initial activities,***,N-M-CLEAs and PEI/PDA-M-CLEAs showed good *** 6 repeated uses,PEI/PDA-M-CLEAs and N-M-CLEAs still maintained 65%and 62%of their initial activities,***,PEI/PDA-M-CLEAs and N-M-CLEAs exhibited higher starch hydrolysis efficiency than freeα-*** maximum dextrose equivalent(DE)values of starch hydrolysis by PEI/PDA-M-CLEAs and N-M-CLEAs reached 29.24%and 28.79%within 90 min,***,the maximum DE values of starch hydrolysis by the freeα-amylase was only 27.89%even in 150 *** magnetic cross-linkedα-amylase aggregates could be introduced as effective biocatalyst for industrial applications in production of maltose syrups.

关键词： α-amylase Magnetic nanoparticles Functional modification Magnetic cross-linked enzyme aggregates Hydrolysis of starch

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Stage separation of recoverable liquid launch vehicle by using moving pulsating ball analogue for propellant sloshing

引用

Chinese Journal of Aeronautics 2024年第2期37卷 360-370页

作者： Yu LU Baozeng YUE Bailong HAO Bole MA Feng LIU yuanyuan chang School of Aerospace Engineering Beijing Institute of TechnologyBeijing 100081China Beijing Institute of Astronautical Systems Engineering Beijing 100076China

In the process of stage separation of recoverable liquid launch vehicles,because of the large amount of residual fuel in the storage tanks,the influence of liquid sloshing on separation safety must be *** calculation simplicity and operation practicability,the Moving Pulsating Ball Model(MPBM)of large amplitude liquid sloshing is introduced into the calculation of launch vehicle stage *** the dynamic equation of the model with the energy relationship during"breathing movement",the formula calculating the force of liquid on the rigid body is *** with the calculations of commercial CFD calculation software,the accuracy of MPBM model is ***,all the external forces and moments are applied to the rigid body of the stages,so that the translational and rotational dynamic equations of the stages are obtained *** to the relative position of the two stages,the geometric shape of the interstage section and the engine of the second stage,the minimum clearance in the separation process can be decided to guarantee that the separation process is safe.

关键词： Moving Pulsating Ball Model(MPBM) Dynamics of stage separation Large amplitude sloshing Recoverable liquid launch vehicle Flight dynamics

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Two-stage dynamic recrystallization and texture evolution in Al-7Mg alloy during hot torsion

引用

International Journal of Minerals,Metallurgy and Materials 2024年第8期31卷 1900-1911页

作者： Kwang Tae Son chang Hee Cho Myoung Gyun Kim Ji Woon Lee School of Mechanical Industrialand Manufacturing EngineeringOregon State UniversityCorvallis OR 97331USA Department of Materials Science Engineering Northwestern UniversityEvanston IL 60208USA Research Institute of Industrial Science and Technology(RIST) Pohang 37673Rep.of Korea Division of Advanced Materials Engineering Kongju National UniversityCheonan 31080Rep.of Korea Center for Advanced Materials and Parts of Powders Kongju National UniversityCheonan 31080Rep.of Korea

Hot torsion tests were performed on the Al-7Mg alloy at the temperature ranging from 300 to 500℃ and strain rates between 0.05 and 5 s^(-1) to explore the progressive dynamic recrystallization(DRX)and texture *** DRX behavior of the alloy manifested two distinct stages:Stage 1 at strain of≤2 and Stage 2 at strains of≥*** Stage 1,there was a slight increase in the DRXed grain fraction(X_(DRX))with predominance of discontinuous DRX(DDRX),followed by a modest change in X_(DRX) until the transition to Stage *** 2 was marked by an accelerated rate of DRX,culminating in a substantial final X_(DRX) of~*** backscattered diffraction(EBSD)analysis on a sample in Stage 2 revealed that continuous DRX(CDRX)predominantly occurred within the(121)[001]grains,whereas the(111)[110]grains underwent a geometric DRX(GDRX)evolution without a noticeable sub-grain ***,a modified Avrami’s DRX kinetics model was utilized to predict the microstructural refinement in the Al-7Mg alloy during the DRX *** this kinetics model did not accurately capture the DDRX behavior in Stage 1,it effectively simulated the DRX rate in Stage *** texture index was employed to assess the evolution of the texture isotropy during hot-torsion test,demonstrating significant improvement(>75%)in texture randomness before the commencement of Stage *** initial texture evolution is attributed to the rotation of parent grains and the substructure evolution,rather than to an increase in X_(DRX).

关键词： Al-7Mg alloys hot deformation hot torsion tests dynamic recrystazlliation microstructure texture

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Organic near-infrared optoelectronic materials and devices:an overview

引用

Advanced Photonics 2024年第1期6卷 17-42页

作者： Zong-Lu Che chang-Cun Yan Xue-Dong Wang Liang-Sheng Liao Soochow University Institute of Functional Nano and Soft Materials(FUNSOM)Jiangsu Key Laboratory for Carbon-Based Functional Materials and DevicesSuzhouChina Soochow University College of ChemistryChemical Engineering and Materials ScienceJiangsu Engineering Laboratory of Novel Functional Polymeric MaterialsSuzhouChina Macao University of Science and Technology Macao Institute of Materials Science and EngineeringMacaoChina

Near-infrared(NIR)light has shown great potential for military and civilian applications owing to its advantages in the composition of sunlight,invisibility to human eyes,deeper penetration into biological tissues,and low optical loss in optical ***,organic optoelectronic materials that can absorb or emit NIR light have aroused great scientific interest in basic science and practical *** on these NIR organic optoelectronic materials,NIR optoelectronic devices have been greatly improved in performance and *** this review,the representative NIR organic optoelectronic materials used in organic solar cells,organic photodetectors,organic light-emitting diodes,organic lasers,and organic optical waveguide devices are briefly introduced,and the potential applications of each kind of device are briefly ***,we summarize and take up the development of NIR organic optoelectronic materials and devices.

关键词： near-infrared organic optoelectronic materials organic solar cells organic light-emitting devices organic optical waveguides

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Machine learning enabled film pressure sensor to identify surface contacts:An application in surface transmission of infectious disease

引用

Building Simulation 2024年第6期17卷 1023-1036页

作者： Baotian chang Jianchao Zhang Yingying Geng Jiarui Li Doudou Miao Nan Zhang Beijing Key Laboratory of Green Built Environment and Energy Efficient Technology Beijing University of TechnologyBeijing100124China

The global prevalence of infectious diseases has emerged as a significant challenge in recent *** transmission is a potential transmission route of most gastrointestinal and respiratory infectious diseases,which is related to surface touch *** observation,the traditional method of surface touching data collection,is characterized by limited accuracy and high labor *** this work,we proposed a methodology based on machine learning technologies aimed at obtaining high-accuracy and low-labor-cost surface touch behavioral data by means of sensor-based contact *** touch sensing device,primarily utilizing a film pressure sensor and Arduino board,is designed to automatically detect and collect surface contact data,encompassing pressure,duration and *** make certain the surface touch behavior and to describe the behavioral data more accurately,six classification algorithms(*** Vector Machine and Random Forest)have been trained and tested on an experimentally available dataset containing more than 500 surface *** classification results reported the accuracy of above 85%for all the six classifiers and indicated that Random Forest performed best in identifying surface touch behaviors,with 91.8%accuracy,91.9%precision and 0.98 *** study conclusively demonstrated the feasibility of identifying surface touch behaviors through film pressure sensor-based data,offering robust support for the calculation of viral load and exposure risk associated with surface transmission.

关键词： surface transmission touch behavior film pressure sensor random forest infectious disease

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Deep learning-based optical aberration estimation enables offline digital adaptive optics and super-resolution imaging

引用

Photonics Research 2024年第3期12卷 474-484页

作者： chang QIAO HAOYU CHEN RUN WANG TAO JIANG YUWANG WANG DONG LI Department of Automation Tsinghua UniversityBeijing 100084China Institute for Brain and Cognitive Sciences Tsinghua UniversityBeijing 100084China National Laboratory of Biomacromolecules New Cornerstone Science LaboratoryCAS Center for Excellence in BiomacromoleculesInstitute of BiophysicsChinese Academy of SciencesBeijing 100101China College of Life Sciences University of Chinese Academy of SciencesBeijing 100049China Beijing National Research Center for Information Science and Technology Tsinghua UniversityBeijing 100084China

Optical aberrations degrade the performance of fluorescence *** adaptive optics(AO)leverages specific devices,such as the Shack–Hartmann wavefront sensor and deformable mirror,to measure and correct optical ***,conventional AO requires either additional hardware or a more complicated imaging procedure,resulting in higher cost or a lower acquisition *** this study,we proposed a novel space-frequency encoding network(SFE-Net)that can directly estimate the aberrated point spread functions(PSFs)from biological images,enabling fast optical aberration estimation with high accuracy without engaging extra optics and image *** showed that with the estimated PSFs,the optical aberration can be computationally removed by the deconvolution ***,to fully exploit the benefits of SFE-Net,we incorporated the estimated PSF with neural network architecture design to devise an aberration-aware deeplearning super-resolution model,dubbed *** demonstrated that the combination of SFE-Net and SFT-DFCAN enables instant digital AO and optical aberration-aware super-resolution reconstruction for live-cell imaging.

关键词： optics resolution enable

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

Effect of liquid surface depression size on discharge characteristics and chemical distribution in the plasma-liquid anode system

引用

Plasma Science and Technology 2024年第9期26卷 17-31页

作者： Yun LING Dong DAI Jiaxin chang Buang WANG School of Electric Power South China University of TechnologyGuangzhou 510641People’s Republic of China University of Richmond Richmond 23173United States of America

Atmospheric pressure plasma-liquid interactions exist in a variety of applications,including wastewater treatment,wound sterilization,and *** practice,the phenomenon of liquid surface depression will inevitably *** applied gas will cause a depression on the liquid surface,which will undoubtedly affect the plasma generation and further affect the application ***,the effect of liquid surface deformation on the plasma is still *** this work,numerical models are developed to reveal the mechanism of liquid surface depressions affecting plasma discharge characteristics and the consequential distribution of plasma species,and further study the influence of liquid surface depressions of different sizes generated by different helium flow rates on the *** show that the liquid surface deformation changes the initial spatial electric field,resulting in the rearrangement of electrons on the liquid *** charges deposited on the liquid surface further increase the degree of distortion of the electric ***,the electric field and electron distribution affected by the liquid surface depression significantly influence the generation and distribution of active species,which determines the practical effectiveness of the relevant *** work explores the phenomenon of liquid surface depression,which has been neglected in previous related work,and contributes to further understanding of plasma-liquid interactions,providing better theoretical guidance for related applications and technologies.

关键词： plasma-liquid interaction deformation of the liquid surface liquid anode species fluxes

来源：

维普期刊数据库

同方期刊数据库评论

在线全文

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：