检索结果-南通市图书馆

Design and Implementation of a State-feedback Controller Using LQR Technique

Computers, Materials & Continua 2022年第11期73卷 2897-2911页

作者： Aamir Shahzad Shadi Munshi sufyan azam Muhammad Nasir Khan Mechanical Engineering Department The University of LahoreLahorePakistan Mechanical Engineering Department Umm Al-Qura UniversityMakkahSaudi Arabia Electrical Engineering Department The University of LahoreLahorePakistan

The main objective of this research is to design a state-feedback controller for the rotary inverted pendulum module utilizing the linear quadratic regulator(LQR)*** controller maintains the pendulum in the inverted(upright)position and is robust enough to reject external disturbance to maintain its *** research work involves three major contributions:mathematical modeling,simulation,and real-time *** design a controller,mathematical modeling has been done by employing the NewtonEuler,Lagrange *** resulting model was nonlinear so linearization was required,which has been done around a working *** the estimation of the controller parameters,MATLAB LQR function has been *** has been performed for the designed controller and it also has been implemented and tested over the real inverted *** the results,it is vivid that the designed controller keeps the inverted pendulum in an upright position and rejects the disturbances and falling under gravitational force by adjusting the rotation of the horizontal link.

关键词： Mathematical modeling linearization linear quadratic regulator(LQR) nonlinear system rotary inverted pendulum

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

The Effect of Detergents on the Appearance of Automotive Clearcoat Systems Studied in an Outdoor Weathering Test

引用

Materials Sciences and Applications 2017年第7期8卷 521-536页

作者： Mohammad S. Alsoufi Tahani M. Bawazeer Mohammed W. Alhazmi sufyan azam Department of Mechanical Engineering College of Engineering and Islamic Architecture Umm Al-Qura University Makkah KSA Chemistry Department Faculty of Applied Science Umm Al-Qura University Makkah KSA

The ability to predict the weathering performance of the clearcoat system over a short period of time is essential for the design and development of coating production. Thus, the primary objective of the present study is to investigate whether it is possible to predict the weathering performance of an automotive paint system through determination of surface roughness, Ra, and micro-hardness before and after various weathering exposure times (0, 24, 168, 336, 504, 672 hours) and when employing two different detergent materials (house-use detergent and car wash detergent). The data were analysed using a pair-sample t-Test, with 0.05 level of significance. It was found that the total net of degradation in the clearcoat level during the first 24 hours was Ra ≈ 30.3 nm (for surface roughness) and 1.358 HV (for the μ-hardness) when using the house-use detergent. In contrast, it was found to be Ra ≈ 4.6 nm (for surface roughness) and 1.133 HV (for μ-hardness) when using the car wash detergent. Also, increased time of weathering (up to 672 hours) increases the Ra and μ-hardness values. It can therefore be concluded that the effect of house-use detergent was more severe than that of car wash detergent on the clearcoat system.

关键词： Automotive Clearcoat Surface Roughness Micro-Hardness

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Abrasive WaterJet Machining of Thick Carrara Marble: Cutting Performance vs. Profile, Lagging and WaterJet Angle Assessments

引用

Materials Sciences and Applications 2017年第5期8卷 361-375页

作者： Mohammad S. Alsoufi Dhia K. Suker Mohammed W. Alhazmi sufyan azam Department of Mechanical Engineering College of Engineering and Islamic Architecture Umm Al-Qura University Makkah KSA

This paper deals with an assessment of the machined surface created by abrasive waterjet technology regarding its cutting performance versus profile, lagging and waterjet angle assessments. The results of the experiments presented in this study are with regard to Carrara marble. The machined surfaces were measured in seven different locations across a 40 mm depth of cut by a high precision contact-type profilometer and thus assessed using the standardized amplitude parameters of the profile distribution. The lagging and waterjet angle were also evaluated by creating a digital photo of the machined surface together with a reference gauge. The existence of machining marks on the machined surface has been mostly noticeable in the bottom zone around ~20 mm depth of cut down to jet exit. This investigation leads to a conclusion that, stand-off distance and traverse rate play the roles of the utmost importance in considerations of the machined surface quality in contrast to abrasive mass flow rate. In addition, while the striation zone (rough surface) cannot be eliminated entirely, by selecting proper process parameters, a smooth cutting machined surface can be accomplished.

关键词： Skewness Kurtosis Lagging Waterjet Angle Abrasive WaterJet Carrara Marble

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Influence of Abrasive Waterjet Machining Parameters on the Surface Texture Quality of Carrara Marble

引用

Journal of Surface Engineered Materials and Advanced Technology 2017年第2期7卷 25-37页

作者： Mohammad S. Alsoufi Dhia K. Suker Mohammed W. Alhazmi sufyan azam Department of Mechanical Engineering College of Engineering and Islamic Architecture Umm Al-Qura University Makkah KSA

Abrasive waterjet (AWJ) cutting technology has been used extensively for the cutting and processing of almost all engineering materials because of its precise cutting technique and the lack of damage caused. Currently, the use of abrasive waterjet cutting in the natural stone industry is increasing. However, the effectiveness of abrasive waterjet cutting of natural stones is dependent on the rock properties and machine operating parameters. Consequently, this paper presents the influence of abrasive waterjet machining parameters on the surface texture quality of Carrara marble. The results have shown that the abrasive waterjet cutting process offers better cut surface texture quality of Carrara marble under certain parameter conditions as well as being more environmentally-friendly. The stand-off distance shows the opposite effect on both surface roughness and waviness. With a view to reducing the machining costs, every user tries to select the traverse rate of the cutting head to be as high as possible, but results show that increasing the traverse rate always causes a corresponding increase in terms of inaccuracy, surface roughness, Ra ≈ 93.7 μm, and waviness, Wa ≈ 92.6 μm. The abrasive mass flow rate is not a significant parameter during the cutting process. In all investigations, it was found that the machined surface of the marble is smoother near the jet entrance, Ra ≈ 4 μm, and waviness, Wa ≈ 5 μm, and increasingly becomes rougher towards the jet exit. The result also shows that the micro-hardness value of the Carrara marble was in the range of 122 HV to 124 HV.

关键词： Abrasive Waterjet Carrara Marble Micro-Hardness Surface Roughness Waviness

来源：

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

欢迎您,

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案：

请选择收藏分类：

通借通还

欢迎您,

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

在线全文

在线全文

在线全文

在线全文

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：