检索结果-南通市图书馆

Journal of Environmental Sciences 2006年第1期18卷 193-200页

作者： Jae-Wook Lee Tae-Ouk kwon Ramesh Thiruvenkatachari il-Shik Moon Department of Chemistry Engineer Seonam University Namwon 590-711 Korea Department of Chemistry Engineer Sunchon National University Suncheon 540-742 Korea

This study evaluates the adsorption ability ofbisphenol A（BPA） on titanium dioxide（TiO2） and its effect on the photocatalysis by advanced oxidation process using UV radiation and TiO2 photocatalyst. Degradation of BPA was also evaluated for the system without adsorption prior to photocatalytic reaction. The separation of TiO2 from BPA solution treated by pilot-scale photocatalytic reactor （capacity 0.16 m^3） was studied using submerged ultrafiltration （UF） membrane. It was found that although adsorption capacity of BPA was not high, adsorption played an important role in improving the efficiency ofphotocatalysis. On the other hand, during the separation of TiO2 particles from aqueous suspension, the permeate flux of the membrane was strongly affected by transmembrane pressure and TiO2 dose. The permeate turbidity was decreased below 1 NTU.

关键词： bisphenol A TiO2 adsorption membrane photocatalysis

Glucagon peptide-like 1 receptor (GLP-1R) expression per se: a new insight into neurodegenerative disease?

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Neural Regeneration Research 2015年第7期10卷 1055-1057页

作者： Dong-il Kim soo-hyun Park College of Veterinary Medicine Chonnam National University

Glucagon peptide-like 1（GLP-1）and GLP-1 receptor（GLP-1R）：GLP-1 is an incretin hormone secreted from gut L ***-1 exerts its action through binding to its specific receptor,GLP-1R,which is a member of the G protein... 详细信息

关键词： GLP-1R a new insight into neurodegenerative disease expression per se Glucagon peptide-like 1 receptor

Horizontal distribution of Changjiang Diluted Water in summer inferred from total suspended sediment in the Yellow Sea and East China Sea

在线全文

学校读者我要写书评

暂无评论

Acta Oceanologica Sinica 2015年第12期34卷 44-50页

作者： LEE Dong-Kyu kwon Jae-il SON Seung Hyun Pusan National University Coastal Disaster Research Center Korea Institute of Ocean Science and Technology China-Korea Joint Ocean Research Center Cooperative Institute for Research in the Atmosphere Colorado State University

During the summer in the Yellow Sea and East China Sea, the resuspension of the bottom sediment is obstructed by strong stratification and, as a result, the concentration of total suspended sediment（TSS） can be used as an excellent tracer for Changjiang Diluted Water（CDW）. To analyze the spatial and temporal variations of the CDW distribution, the monthly mean TSS from Moderate Resolution Imaging Spectroradiometer（MODIS） ocean color data are constructed and are converted to salinity using the relationship between salinity observed from AQUARIUS and TSS. The process produces the detailed horizontal distribution of salinity with very high resolution（1 km）. From monthly mean salinity map from 2002 to 2012 in July and August, the expansion patterns of CDW are analyzed. The southerly wind in July and southeasterly wind in August transport the CDW eastward and northeastward, respectively. It is found that the yearly variation of the expansion of CDW toward the southern sea area of Korea is mostly due to the variation of southerly wind and the fluctuations of fresh water discharge into the Changjiang estuary show relatively little impact on the eastward extend of CDW. When 11-year mean（from2002 to 2012） salinity map in August is compared with World Ocean Atlas 2013, it is revealed that wind in August strengthened six times from 1994 and it causes the expansion of CDW extended 150 km further eastward.

关键词： Yellow and East China Seas Changjiang diluted water total suspended sediment MODIS

Nonlinear Finite Element Analysis of Ocean Cables

在线全文

学校读者我要写书评

暂无评论

海洋工程：英文版 2004年第4期18卷 537-550页

作者： Nam-il KIM Sang-soo JEON Moon-Young KIM Department of Civil-Environmental Engineering SungKyunKwan University Jangan-Gu Suwon Kyongki-Do 440-746 S. Korea Highway and Transportation Technology Institute Korea Highway Corporation San 28-1 Sancheok-Ri Dongtan-Myeon Hwaseong City S. Korea Department of Civil-Environmental Engineering SungKyunKwan University Jangan-Gu Suwon Kyongki-Do 440-746 S. Korea

This study has focused on developing numerical procedures for the dynamic nonlinear analysis of cable structures subjected to wave forces and ground motions in the ocean. A geometrically nonlinear finite element procedure using the isoparametric curved cable element based on the Lagrangian formulation is briefly summarized. A simple and accurate method to determine the initial equilibrium state of cable systems associated with self-weights, buoyancy and the motion of end points is presented using the load incremental method combined with penalty method. Also the Newmark method is used for dynamic nonlinear analysis of ocean cables. Numerical examples are presented to validate the present numerical method.

关键词： nonlinear cable wave finite element analysis

Systemic lupus erythematosus in a 15-year-old female with multiple splenic nodules:A case report

在线全文

学校读者我要写书评

暂无评论

World Journal of Clinical Cases 2024年第12期12卷 2128-2133页

作者： Mi il Kang Hyeok Chan kwon Division of Rheumatology Department of Internal MedicineDankook University College of MedicineCheonan-si 31116South Korea Division of Rheumatology Department of Internal MedicineDankook University HospitalDankook University College of MedicineCheonan-si 31116South Korea

BACKGROUND Systemic lupus erythematosus(SLE)is a chronic inflammatory disease primarily affecting young *** can invade any organ,and various forms of splenic invasion have been *** include splenomegaly and splenic infarction,rupture,and *** study encountered a rare case of splenic involvement,with nodules of various sizes without calcifications or *** SUMMARY A 15-year-old girl presented with arthralgia,weight loss,fever,increased levels of inflammatory markers,and positive antinuclear antibody test *** patient was diagnosed with *** was asymptomatic while taking steroids and *** months after discharge,the patient developed a fever and abdominal *** enteritis was suspected,and abdominopelvic computed tomography(AP-CT)was *** were no specific findings in the gastrointestinal tract,but multiple splenic nodules were *** or hemangioma was considered;however,no specific radiological findings were observed.A biopsy of the spleen was performed to determine the possibility of *** histological findings of the spleen included extensive periarteriolar necrosis with hematoxylin bodies and numerous karyorrhectic *** on the biopsy results,the patient was diagnosed with an SLE flare-up and was maintained on high-dose steroids and *** As disease activity increased,multiple nodules in the spleen that were previously unseen were observed using AP-CT and histologically *** invasion by SLE can appear in multiple nodular forms and ***,physicians should consider these findings when differentiating these nodules from infections and malignancies.

关键词： Multiple nodules Spleen Splenectomy Systemic lupus erythematosus Differential diagnosis Case report

Improvement of light uniformity by lighting arrangement for standardized crop production

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Central South University 2014年第11期21卷 4311-4319页

作者： Lee Hwa-soo kwon sook-Youn Lim Jae-Hyun Department of Computer Science and Engineering Kongju National UniversityCheonan 331-717 Korea

In a commercialized, fully artificial plant factory, artificial luminaire is arranged in a unified way using a general illumination theory, an actual measurement, or an empirical methodology. However, with these methods, lightings are implemented without considering specific optical characteristics of lighting or material characteristics of each component that constructs a cultivation system, resulting in an amount of light that becomes irregular. The amount of lighting is closely related with the growth and quality of crops, and the deviation between points where cultivated crops are located causes quality difference in the produced crops, thus impairing the economic feasibility of a plant factory. In this regard, a simulation to figure out an optimum lighting layout was performed. Arrangements based on the spectrum distribution of light source and reflector materials were implemented to ascertain the distance between lighting and height of lighting and gather information in the pre-treatment process to improve the uniformity of light in the plant cultivation system. Improvement of around 15% in light uniformity is achieved compared with the existing system after the simulation is carried out. This result would reduce the deviation in crop growth to make uniform quality crop production possible.

关键词： high-quality crop light uniformity improvement optimal lighting layout fully artificial plant factory Relux simulation

Nonlinear dynamics of curved IPMC actuators undergoing electrically driven large deformations

在线全文

学校读者我要写书评

暂无评论

International Journal of Smart and Nano Materials 2012年第3期3卷 214-225页

作者： Jin-Han Jeon Choonghee Jo il-kwon Oh School of Mechanical Aerospace and Systems EngineeringKorea Advanced Institute of Science and Technology291 Daehak-roYuseong-guDaejeon 305-701Republic of Korea

The nonlinear dynamics of curved ionic polymer-metal composite(IPMC)actuators having large tip displacement and periodical jumping locomotion was investigated *** snap-through phenomena,the actuator generates much larger tip displacement and shows abrupt jumps in the transitions of upswings and downswings with low input *** curved IPMC cantilever actuators having two different constant curvatures of 0.01 mm^(−1) and 0.02 mm^(−1) were fabricated through thermal treatment from flat IPMCs,simultaneously with no residual ***-fabricated IPMC actuators were tested to evaluate the effect of initial curvature under static and dynamic electrical *** the case of the flat IPMC actuator,asymmetric characteristics in step and harmonic responses were investigated in the curved IPMC ***,at relatively higher input voltage,snap-through phenomena were observed with much larger transverse displacements and periodical abrupt jumps of the instant *** revealed jumping movements between the multiple equilibrium *** results show that optimum curvatures for better bending performance of curved cantilever IPMCs exist and that this snap-through mechanism could be applied to IPMC actuators by considering their soft and flexible properties and the geometric structures.

关键词： ionic polymer-metal composite snap-through dynamics thermal treatment actuator

Expression of Ki-67,p53,and K-ras in chronic pancreatitis and pancreatic ductal adenocarcinoma

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

World Journal of Gastroenterology 2005年第43期11卷 6765-6769页

作者： Seok Jeong Don Haeng Lee Jung il Lee Jin-Woo Lee Kye sook kwon Pum-soo Kim Hyung Gil Kim Yong Woon Shin Young soo Kim Young Bae Kim Division of Gastroenterology Department of Pathology

AIM： To examine surgical specimens of pancreas with either chronic pancreatitis or pancreatic cancer in order to study whether ductal hyperplasia and dysplasia in pancreas represent precursor lesions for pancreatic cancer. METHODS： We examined expression of Ki-67, CEA, p53, and K-ras, in the surgical specimens of pancreas with adenocarcinomas （n = 11） and chronic pancreatitis （n = 12）. Cellular proliferation was assessed by Ki-67 proliferation index using the proliferation marker Ki-67. In specimens with pancreas cancer, we divided pancreas epithelium into normal （n = 7）, ductal hyperplasia （n = 3）, dysplasia （n = 4）, and cancerous lesion （n = 11） after hematoxylin and eosin staining, Ki-67, and CEA immunohistochemical staining. In cases with chronic pancreatitis, the specimen was pathologically examined as in cases with pancreas cancer, and they were also determined as normal （n = 10）, ductal hyperplasia （n = 4）, or dysplasia （n = 5）. p53 and K-ras expression were also studied by immunohistochemical staining. RESULTS： In pancreatic cancer, the Ki-67 index was 3.73±3.58 in normal site, 6.62±4.39 in ductal hyperplasia, 13.47：1：4.02 in dysplasia and 37.03±10.05 in cancer tissue, respectively. Overall, p53 was positive in normal ducts, ductal hyperplasia, dysplasia, and carcinoma cells in 0 of 14 （0%）, 0 of 7 （0%）, 7 of 9 （78%）, and 10 of 11 （91%）, respectively, and K-ras was positive in 0 of 8 （0%）, 1 of 3 （33%）, 4 of 6 （67%）, 4 of 5 （80%）, respectively. CONCLUSION： Our results favorably support the hypothesis that ductal hyperplasia and dysplasia of the pancreas might be precursor lesions for pancreas cancer. Further evaluation of oncogenes by the molecular study is needed.

关键词： Ki-67 p53 K-ras Chronic pancreatitis Pancreatic ductal adenocarcinoma

Parametric design of a part with free-form surfaces

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2006年第9期7卷 1530-1534页

作者： KIM Yeoung-il KIM Li-ra JUN Cha-soo Reseach Institute for CAD/CAM CITEK System Changwon 641-845 Korea School of Industrial and Systems Engineering Gyeongsang National University Jinju 660-701 Korea Research Center for Aircraft Parts Technology School of Industrial and Systems Engineering Gyeongsang National University Jinju 660-701 Korea

3D solid models for parts with regular-form surfaces (PRFSs) are effectively generated using traditional parametric design techniques. A new model is obtained by changing some parameters defining the model. The parts with free-form surfaces (PFFSs), however, cannot be defined by several parameters. Usually they are defined by some geometric elements like profile curves. The traditional parametric design approaches have not easily dealt with the PFFSs. A method for generating a solid model and an engineering drawing for PFFSs is proposed in this paper: First, the new profiles are generated from input point data. Second, the profile information is extracted from the existing model. Last, the old profiles are replaced with the new profiles. This method can preserve the associative information of the existing model and automatically generate the drawing including views, dimen- sions, and annotations. The proposed method has been implemented using a commercial CAD/CAM system, Unigraphics, and API functions written in C-language, and were applied to the blades of a turbine generator. Some illustrative examples are pro- vided in order to show the effectiveness of the proposed method.

关键词： Parametric modelling Free-form surface Solid model Drawing

Preparation of AZ91D Slurries for Semi-Solid Forming Using Al8 ( Mn, Fe) 5 Precipitates

在线全文

学校读者我要写书评

暂无评论

Journal of Rare Earths 2004年第Z2期22卷 42-46页

作者： Ji Young Byun soon il kwon Jeong Man Doh Heon Phil Ha Metal Processing Research Center Division of MaterialsKorea Institute of Science and Technology# 39-1 Haweolgok-DongSungbuk-KuSeoul 136-791Republic of Korea

During the solidification of the AZ91D-alloys, the Al8(Mn, Fe)5 phase is generally precipitated in the melt in advance of the precipitation of the primary α-Mg. The basic principle for manufacturing AZ91D-alloy slurries for semi solid forming is to use the Al8(Mn, Fe)5 precipitates as the heterogeneous nucleation sites for primary α-Mg phases. Microscopic analysis for the location of the Al8(Mn, Fe)5 precipitate explains that the Al8(Mn, Fe)5 precipitate is the effective heterogeneous nucleation site for the primary α-Mg phase. It was also observed that increase of the Mn content in the melt and the cooling rate below to the solid/liquid two-phase region resulted in smaller and more globular primary α-Mg due to the increase of heterogeneous nucleation sites. It was found that the average α-Mg diameter grew as a function of t0.278, where t is the holding time at the solid/liquid two-phase region. This would be attributed to the Ostwald type ripening and coalescence between primary α-Mg phases. The cooling rate below to the solid/liquid two-phase region, Mn content in AZ91D alloy, and the holding time and temperature affected on the quality of slurry.

关键词： AZ91D alloy semi-solid forming solidification heterogeneous nucleation