检索结果-南通市图书馆

Journal of Environmental Sciences 2006年第3期18卷 433-438页

作者： XIA si-qing liu hong-bo State Key Lab of Pollution Control and Resource Reuse Tongji University Shanghai 200092 China.

Three parallel anaerobic-anoxic/anaerobic-aerobic （AN/AO） processes were developed to enrich denitrifying phosphorus removal bacteria （DPB） for low strength wastewater treatment. The main body of the parallel AN/AO process consists of an AN （anaerobic-anoxic） process and an AO （anaerobic-aerobic） process. In the AO process, the common phosphorus accumulating organisms （PAOs） was dominate, while in the AN process, DPB was dominate, The volume of anaerobic zone（Vana）：anoxie zone（Vano）： aerobic zone （Vaer） for the parallel AN/AO process is 1：1：1 in contrast with a Vana：Vaer and Vano：Vaer of 1：2 and 1：4 for a traditional biological nutrient removal process （BNR）. Process 3 excels in the 3 processes on the basis of COD, TN and TP removal. For 4 month operation, the effluent COD concentration of process 3 did not exceed 60 mg/L; the effluent TN concentration of process 3 was lower than 15 mg/L; and the effluent TP concentration of process 3 was lower than 1 mg/L.

关键词： parallel AN/AO process denitrifying phosphorus removing bacteria (DPB) low strength wastewater biological nutrientremoval (BNR)

Formulations of a hydromechanical interface element

在线全文

学校读者我要写书评

暂无评论

Acta Mechanica sinica 2011年第5期27卷 697-705页

作者： Zhong-Zhi Fu si-hong liu College of Water Conservancy and Hydropower Engineering Hohai University 210098 Nanjing China

A hydromechanical interface element is proposed for the consideration of the hydraulic-mechanical coupling effect along the *** fully coupled governing equations and the relevant finite element formulations are derived in detail for the interface *** the involved matrices are of the same form as those of a solid element,which makes the incorporation of the model into a finite element program *** examples are then numerically simulated using the interface *** results confirm the correctness of the proposed model and motivate its application in hydromechanical contact problems in the future.

关键词： Hydromechanical interface element · Coupling effect · Finite element · Contact problem

Numerical stress-deformation analysis of cut-off wall in clay-core rockfill dam on thick overburden

在线全文

学校读者我要写书评

暂无评论

Water Science and Engineering 2016年第3期9卷 219-226页

作者： si-hong liu liu-jiang Wang Zi-jian Wang Erich Bauer College of Water Conservancy and Hydropower Engineering Hohai UniversityNanjing 210098China Zhejiang Design Institute of Conservancy and Hydroelectric Power Hangzhou 310002China Institute of Applied Mechanics Graz University of TechnologyGraz 8010Austria

The cut-off wall in a clay-core rockfill dam built on a thick overburden layer is subjected to a large compressive pressure under the action of the loads such as the dead weight of both the dam and the overburden layer, the frictional force induced by the differential settlement between the cut-off wall and surrounding soils, and the water pressure. Thus, reduction of the stress of the cut-off wall has become one of the main problems for consideration in engineering design. In this paper, numerical analysis of a core rockfill dam built on a thick overburden layer was conducted and some factors influencing the stress-strain behaviors of the cut-off wall were investigated. The factors include the improvement of the overburden layer, the modeling approach for interfacial contact between the cut-off wall and surrounding soils, the modulus of the cut-off wall concrete, and the connected pattern between the cut-off wall and the clay core. The result shows that improving the overburden layer,selecting plastic concrete with a low modulus and high strength, and optimizing the connection between the cut-off wall and the clay core of the dam are effective measures of reducing the deformations and compressive stresses of the cut-off wall. In addition, both the Goodman element and the mud-layer element are suitable for simulating the interfacial contact between the cut-off wall and surrounding soils.

关键词： Overburden layer Core rockfill dam Cut-off wall Numerical analysis Stress and deformation analysis

Calibration and performance of two different constitutive models for rockfill materials

在线全文

学校读者我要写书评

暂无评论

Water Science and Engineering 2016年第3期9卷 227-239页

作者： Lin-ke Li Zhan-jun Wang si-hong liu Erich Bauer Institute of Applied Mechanics Graz University of Technology Changjiang Institute of Survey PlanningDesign and Research College of Water Conservancy and Hydropower Engineering Hohai University

In this paper, two different concepts for the constitutive modeling of the mechanical behavior of creep-sensitive rockfill materials are presented. Specifically, the performance of an extended generalized plasticity model proposed by Wang is compared with a simplified version of the hypoplastic constitutive model for weathered rockfill materials proposed by Bauer. Both models can reflect the influence of the mean stress on the incremental stiffness, the peak friction angle, and the dilatancy angle. The so-called solid hardness defined for a continuum description and originally introduced by Bauer is embedded in both models. Hydrochemical, thermal, and mechanical weathering are usually caused by environmental changes and are taken into account in a phenomenological description with an irreversible and time-dependent degradation of the solid hardness. A degradation of the solid hardness is usually accompanied by creep deformation of the stressed rockfill material. It is shown that appropriate modeling of creep deformation requires at least a unified description of the interaction between the time-dependent process of degradation of the solid hardness and the stress state. In this context, the solid hardness can be understood as a key parameter for describing the evolution of the state of weathering of the rockfill material. Particular attention is also paid to the necessary procedure for determining the constitutive constants of the two different constitutive models. Finally, the performance of the two different constitutive models is demonstrated by comparing the results obtained from numerical simulations with experimental data from the creep-sensitive rockfill material.

关键词： Rockfill material Creep Generalized plasticity Hypoplasticity Constitutive model

Packing,compressibility,and crushability of rockfill materials with polydisperse particle size distributions and implications for dam engineering

在线全文

学校读者我要写书评

暂无评论

Water Science and Engineering 2022年第4期15卷 358-366页

作者： Chao-min Shen si-hong liu liu-jiang Wang Ji-du Yu Hao Wei Ping Wu College of Water Conservancy and Hydropower Engineering Hohai UniversityNanjing 210098China International Joint Laboratory of Long-term Behaviour&Environmentally Friendly Rehabilitation Technologies on Dams Hohai UniversityNanjing 210098China China Railway Water Conservancy&Hydropower Planning and Design Group Co.Ltd. Nanchang 330029China

In rockfill dam engineering,particle breakage of rockfill materials is one of the major factors resulting in dam *** this study,one-dimensional compression tests on a series of coarse granular materials with artificially-graded particle size distributions(PSDs)were carried *** tests focused on understanding the role of initial PSDs in the dense packing density,compressibility and crushability of coarse granular *** effects of fractal dimension(D)and size polydispersity(θ)of PSDs were quantitatively *** different loading stages were identified from the logarithms of the stress-strain relationships,with the turning point marked as the yield stress.A similar effect of initial PSDs was observed on the packing density and low-pressure modulus of coarse granular *** packing density and low-pressure modulus increased monotonically withθ,and their peak values were attained at a D value of approximately ***,there was no unique correspondence between the dense packing density and low-pressure *** particle breakage was influenced differently by the initial PSDs,and it decreased with the values of D andθ.The emergence of the unique ultimate state was also identified from both the compression curves and PSDs of the samples after the *** potential implications of the test results in the design of both low and high rockfill dams were also demonstrated.

关键词： Rockfill materials Packing density Compressibility Particle breakage Rockfill dam

Preface for special section on long-term behavior of dams

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

水科学与水工程：英文版 2016年第3期9卷 173-174页

作者： si-hong liu Erich Bauer College of Water Conservancy and Hydropower Engineering Hohai University Institute of Applied Mechanics Graz University of Technology

When it comes to the long-term operation of hydropowerplants, the service life of mechanical and electrical equipmentand the reliability of hydraulic engineering structures areboth crucial. The loading history and interaction of theconstruction with ground settlements, earthquake activities andflooding, chemical reactions with water, overtopping, and thestate of weathering and aging of the construction material mayplay an important role in the safe operation of hydraulicstructures such as earth, rockfill, and concrete dams, as wellas novel reinforced soil structures. A critical reduction ofthe safety of dams can be caused by the evolution of internalerosion, cracks in the sealing, earthquake-induced deformations,reduction of the slope stability of earth and rockfilldams triggered by heavy rainwater infiltration, or rapid reductionof the water level in the reservoir.

关键词： hydropowerplants equipmentand

Application of in situ direct shear device to shear strength measurement of rockfill materials

在线全文

学校读者我要写书评

暂无评论

Water Science and Engineering 2009年第3期2卷 48-57页

作者： si-hong liu Research Institute of Hydraulic Structures Hohai University Nanjing 210098 P. R. China State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering Hohai University Nanjing 210098 P. R. China

A simplified in situ direct shear test （DST） was developed for measuring the shear strength of soils in fields. In this test, a latticed sheafing frame replaces the upper half of the shear box used in the conventional direct shear box test. The latticed shearing frame is directly embedded in the ground to be tested after a construction process and is pulled with a flexible chain while a constant dead load is applied to the sample in the sheafing frame. This simplified in situ DST has been validated by comparing its results with those of triaxial tests on samples with parallel gradations under normal stresses less than 100 kPa. In this study, the DST was further validated by carrying out tests on samples with the same gradations, rather than on samples with parallel gradations, under normal stresses up to 880 kPa. In addition, the DST was performed inside fills in two applications.

关键词： in situ direct shear test shear strength rockfill

Clinical efficacy of laparoscopic cholecystectomy combined with endoscopic papillary balloon dilation in treatment of gallbladder stones with common bile duct stones: A retrospective study

在线全文

学校读者我要写书评

暂无评论

World Journal of Gastrointestinal Surgery 2024年第6期16卷 1700-1708页

作者： hong-Dan liu Qi Zhang Wen-si Xu Shuang Jin Department of Gastroenterology The Third Affiliated Hospital of Qiqihar Medical UniversityQiqihar 161000Heilongjiang ProvinceChina

BACKGROUND The incidence of cholelithiasis has been on the rise in recent years,but the choice of procedure is *** To investigate the efficacy of laparoscopic cholecystectomy(LC)combined with endoscopic papillary balloon dilation(EPBD)in patients with gallbladder stones(GS)with common bile duct stones(CBDS).METHODS The clinical data of 102 patients with GS combined with CBDS were selected for retrospective analysis and divided into either an LC+EPBD group(n=50)or an LC+endoscopic sphincterotomy(EST)group(n=52)according to surgical ***-related indexes,postoperative recovery,postoperative complications,and expression levels of inflammatory response indexes were compared between the two *** Total surgical time,stone free rate,rate of conversion to laparotomy,and successful stone extraction rate did not differ significantly between the LC+EPBD group and LC+EST *** hemorrhage,time to ambulation,and length of hospitalization in the LC+EPBD group were lower than those of the LC+EST group(Psion levels of interleukin-6,tumor necrosis factor-α,high-sensitivity Creactive protein,and procalcitonin were lower in the LC+EPBD group than in the LC+EST group(Psion levels of aspartate transaminase,alanine transaminase,and total bilirubin were lower in the LC+EPBD group than in the LC+EST group(PsiON LC combined with EPBD and LC combined with EST are both effective procedures for the treatment of GS with CBDS,in which LC combined with EPBD is beneficial to shorten the patient’s hospitalization time,reduce the magnitude of elevated inflammatory response indexes,and promote postoperative recovery.

关键词： Gallbladder stone Common bile duct stone Endoscopic papillary balloon dilation Laparoscopic cholecystectomy Endoscopic sphincterotomy

Cordyceps as potential therapeutic agents for atherosclerosis

维普期刊数据库评论

在线全文

维普期刊数据库

学校读者我要写书评

暂无评论

Journal of Integrative Medicine 2024年第2期22卷 102-114页

作者： Yi Zhang si-jing liu School of Marxism Chengdu University of Traditional Chinese MedicineChengdu 61137Sichuan ProvinceChina College of Medical Technology Chengdu University of Traditional Chinese MedicineChengdu 611137Sichuan ProvinceChina Chongqing Key Laboratory of sichuan-Chongqing Co-construction for Diagnosis and Treatment of Infectious Diseases with Integrated Chinese and Western Medicine Chengdu University of Traditional Chinese MedicineChengdu 611137Sichuan ProvinceChina

Atherosclerosis is a leading cause of mortality and morbidity *** the challenges in managing atherosclerosis,researchers continue to investigate new treatments and complementary *** is a traditional Chinese medicine that has recently gained attention as a potential therapeutic agent for *** studies have demonstrated the effectiveness of cordyceps in treating atherosclerosis through various pharmacological actions,including anti-inflammatory and antioxidant activities,lowering cholesterol,inhibiting platelet aggregation,and modulating apoptosis or autophagy in vascular endothelial ***,the current misuse of the terms cordyceps and Ophiocordyceps sinensis has caused confusion among researchers,and complicated the current academic research on *** review focuses on the chemical composition,pharmacological actions,and underlying mechanisms contributing to the anti-atherosclerotic effects of cordyceps and the mycelium of Ophiocordyceps *** review provides a resource for the research on the development of new drugs for atherosclerosis from cordyceps.

关键词： Atherosclerosis Cordyceps Ophiocordyceps sinensis

Energy-efficient buffer and service rate allocation in manufacturing systems using hybrid machine learning and evolutionary algorithms

在线全文

学校读者我要写书评

暂无评论

Advances in Manufacturing 2024年第2期12卷 227-251页

作者： si-Xiao Gao Hui liu Jun Ota Key Laboratory of Traffic Safety on Track of Ministry of Education Institute of Artificial Intelligence and Robotics(IAIR)School of Traffic and Transportation EngineeringCentral South UniversityChangsha410075People’s Republic of China Research into Artifacts Center for Engineering School of EngineeringThe University of TokyoTokyoJapan

Currently,simultaneous buffer and service rate allocation is a topic of interest in the optimization of manufacturing *** allocation problems have been solved previously to satisfy economic requirements;however,owing to the progress of green manufacturing,energy conservation and environmental protection have become increasingly ***,an energy-efficient approach is developed to maximize the throughput and minimize the energy consumption of manufacturing systems,subject to the total buffer capacity,total service rate,and predefined energy *** energy-efficient approach integrates the simulated annealing-non-dominated sorting genetic algorithm-II with the honey badger algorithm-histogram-based gradient boosting regression *** former algorithm searches for Pareto-optimal solutions of sufficient *** latter algorithm builds prediction models to rapidly calculate the throughput,energy consumption,and energy *** examples show that the proposed hybrid approach can achieve a better solution quality compared with previously reported ***,the prediction models can rapidly evaluate manufacturing systems with sufficient *** study benefits the multi-objective optimization of green manufacturing systems.

关键词： Energy-efficient allocation Multi-objective optimization Energy efficiency Energy consumption Machine learning